| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"This has a bunch of idxd driver fixes, dmatest revert and bunch of
smaller driver fixes:
- a bunch of idxd potential mem leak fixes
- dmatest revert for waiting for interrupt fix as that causes issue
- a couple of ti k3 udma fixes for locking and cap_mask
- mediatek deadlock fix and unused variable cleanup fix"
* tag 'dmaengine-fix-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: mediatek: drop unused variable
dmaengine: fsl-edma: Fix return code for unhandled interrupts
dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status()
dmaengine: idxd: Fix ->poll() return value
dmaengine: idxd: Refactor remove call with idxd_cleanup() helper
dmaengine: idxd: Add missing idxd cleanup to fix memory leak in remove call
dmaengine: idxd: fix memory leak in error handling path of idxd_pci_probe
dmaengine: idxd: fix memory leak in error handling path of idxd_alloc
dmaengine: idxd: Add missing cleanups in cleanup internals
dmaengine: idxd: Add missing cleanup for early error out in idxd_setup_internals
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_groups
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_engines
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_wqs
dmaengine: ptdma: Move variable condition check to the first place and remove redundancy
dmaengine: idxd: Fix allowing write() from different address spaces
dmaengine: ti: k3-udma: Add missing locking
dmaengine: ti: k3-udma: Use cap_mask directly from dma_device structure instead of a local copy
dmaengine: Revert "dmaengine: dmatest: Fix dmatest waiting less when interrupted"
dmaengine: idxd: cdev: Fix uninitialized use of sva in idxd_cdev_open
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
"A bunch of renesas fixes and few smaller fixes in other drivers:
- Rensas fixes for unbind ole detection, irq, locking etc
- tegra fixes for error handling at init and UTMI power states and
stray unlock fix
- rockchip missing assignment and pll output fixes
- startfive usb host detection fixes"
* tag 'phy-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: Fix error handling in tegra_xusb_port_init
phy: renesas: rcar-gen3-usb2: Set timing registers only once
phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off
phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data
phy: renesas: rcar-gen3-usb2: Move IRQ request in probe
phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind
phy: tegra: xusb: remove a stray unlock
phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz error
phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failure
phy: rockchip-samsung-dcphy: Add missing assignment
phy: can-transceiver: Re-instate "mux-states" property presence check
phy: qcom-qmp-ufs: check for mode type for phy setting
phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Fix for irq domain creation race in the core
* tag 'soundwire-6.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: bus: Fix race on the creation of the IRQ domain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Nine singleton hotfixes, all MM. Four are cc:stable"
* tag 'mm-hotfixes-stable-2025-05-17-09-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: userfaultfd: correct dirty flags set for both present and swap pte
zsmalloc: don't underflow size calculation in zs_obj_write()
mm/page_alloc: fix race condition in unaccepted memory handling
mm/page_alloc: ensure try_alloc_pages() plays well with unaccepted memory
MAINTAINERS: add mm GUP section
mm/codetag: move tag retrieval back upfront in __free_pages()
mm/memory: fix mapcount / refcount sanity check for mTHP reuse
kernel/fork: only call untrack_pfn_clear() on VMAs duplicated for fork()
mm: hugetlb: fix incorrect fallback for subpool
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc irqchip driver fixes from Ingo Molnar:
- Remove the MSI_CHIP_FLAG_SET_ACK flag from 5 irqchip drivers
that did not require it
- Fix IRQ handling delays in the riscv-imsic irqchip driver
* tag 'irq-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-imsic: Start local sync timer on correct CPU
irqchip: Drop MSI_CHIP_FLAG_SET_ACK from unsuspecting MSI drivers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix SEV-SNP kdump bugs
- Update the email address of Alexey Makhalov in MAINTAINERS
- Add the CPU feature flag for the Zen6 microarchitecture
- Fix typo in system message
* tag 'x86-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove duplicated word in warning message
x86/CPU/AMD: Add X86_FEATURE_ZEN6
x86/sev: Make sure pages are not skipped during kdump
x86/sev: Do not touch VMSA pages during SNP guest memory kdump
MAINTAINERS: Update Alexey Makhalov's email address
x86/sev: Fix operator precedence in GHCB_MSR_VMPL_REQ_LEVEL macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event fix from Ingo Molnar:
"Fix PEBS-via-PT crash"
* tag 'perf-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix segfault with PEBS-via-PT with sample_freq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix some bugs in kernel-fpu, cpu idle function, hibernation and
uprobes"
* tag 'loongarch-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: uprobes: Remove redundant code about resume_era
LoongArch: uprobes: Remove user_{en,dis}able_single_step()
LoongArch: Save and restore CSR.CNTC for hibernation
LoongArch: Move __arch_cpu_idle() to .cpuidle.text section
LoongArch: Fix MAX_REG_OFFSET calculation
LoongArch: Prevent cond_resched() occurring within kernel-fpu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
- designware: cleanup properly on probe failure
* tag 'i2c-for-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: Fix an error handling path in i2c_dw_pci_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.15-rc7
- designware: cleanup properly on probe failure
|
|
Pull smb client fixes from Steve French:
- Fix memory leak in mkdir error path
- Fix max rsize miscalculation after channel reconnect
* tag '6.15-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix zero rsize error messages
smb: client: fix memory leak during error handling for POSIX mkdir
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, I'll be honest and say I think this is larger than
I'd prefer at this point, the main blow out point is that xe has two
larger fixes.
One is a fix for active context utilisation reporting, it's for a
reported regression and will end up in stable anyways, so I don't see
any point in holding it up.
The second is a fix for mixed cpu/gpu atomics, which are currently
broken, but are also not something your average desktop/laptop user is
going to hit in normal operation, and having them fixed now is better
than threading them through stable later.
Other than those, it's mostly the usual, a bunch of amdgpu randoms and
a few other minor fixes.
dma-buf:
- Avoid memory reordering in fence handling
meson:
- Avoid integer overflow in mode-clock calculations
panel-mipi-dbi:
- Fix output with drm_client_setup_with_fourcc()
amdgpu:
- Fix CSA unmap
- Fix MALL size reporting on GFX11.5
- AUX fix
- DCN 3.5 fix
- VRR fix
- DP MST fix
- DML 2.1 fixes
- Silence DP AUX spam
- DCN 4.0.1 cursor fix
- VCN 4.0.5 fix
ivpu:
- Fix buffer size in debugfs code
gpuvm:
- Add timeslicing and allocation restriction for SVM
xe:
- Fix shrinker debugfs name
- Add HW workaround to Xe2
- Fix SVM when mixing GPU and CPU atomics
- Fix per client engine utilization due to active contexts not saving
timestamp with lite restore enabled"
* tag 'drm-fixes-2025-05-17' of https://gitlab.freedesktop.org/drm/kernel: (24 commits)
drm/xe: Add WA BB to capture active context utilization
drm/xe: Save the gt pointer in lrc and drop the tile
drm/xe: Save CTX_TIMESTAMP mmio value instead of LRC value
drm/xe: Timeslice GPU on atomic SVM fault
drm/gpusvm: Add timeslicing support to GPU SVM
drm/xe: Strict migration policy for atomic SVM faults
drm/gpusvm: Introduce devmem_only flag for allocation
drm/xe/xe2hpg: Add Wa_22021007897
drm/amdgpu: read back register after written for VCN v4.0.5
Revert "drm/amd/display: Hardware cursor changes color when switched to software cursor"
dma-buf: insert memory barrier before updating num_fences
drm/xe: Fix the gem shrinker name
drm/amd/display: Avoid flooding unnecessary info messages
drm/amd/display: Fix null check of pipe_ctx->plane_state for update_dchubp_dpp
drm/amd/display: check stream id dml21 wrapper to get plane_id
drm/amd/display: fix link_set_dpms_off multi-display MST corner case
drm/amd/display: Defer BW-optimization-blocked DRR adjustments
Revert: "drm/amd/display: Enable urgent latency adjustment on DCN35"
drm/amd/display: Correct the reply value when AUX write incomplete
drm/amdgpu: fix incorrect MALL size for GFX1151
...
|
|
Pull NFS client bugfixes from Trond Myklebust:
- NFS: Fix a couple of missed handlers for the ENETDOWN and ENETUNREACH
transport errors
- NFS: Handle Oopsable failure of nfs_get_lock_context in the unlock
path
- NFSv4: Fix a race in nfs_local_open_fh()
- NFSv4/pNFS: Fix a couple of layout segment leaks in layoutreturn
- NFSv4/pNFS Avoid sharing pNFS DS connections between net namespaces
since IP addresses are not guaranteed to refer to the same nodes
- NFS: Don't flush file data while holding multiple directory locks in
nfs_rename()
* tag 'nfs-for-6.15-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Avoid flushing data while holding directory locks in nfs_rename()
NFS/pnfs: Fix the error path in pnfs_layoutreturn_retry_later_locked()
NFSv4/pnfs: Reset the layout state after a layoutreturn
NFS/localio: Fix a race in nfs_local_open_fh()
nfs: nfs3acl: drop useless assignment in nfs3_get_acl()
nfs: direct: drop useless initializer in nfs_direct_write_completion()
nfs: move the nfs4_data_server_cache into struct nfs_net
nfs: don't share pNFS DS connections between net namespaces
nfs: handle failure of nfs_get_lock_context in unlock path
pNFS/flexfiles: Record the RPC errors in the I/O tracepoints
NFSv4/pnfs: Layoutreturn on close must handle fatal networking errors
NFSv4: Handle fatal ENETDOWN and ENETUNREACH errors
|
|
The Linux client assumes that all filehandles are non-volatile for
renames within the same directory (otherwise sillyrename cannot work).
However, the existence of the Linux 'subtree_check' export option has
meant that nfs_rename() has always assumed it needs to flush writes
before attempting to rename.
Since NFSv4 does allow the client to query whether or not the server
exhibits this behaviour, and since knfsd does actually set the
appropriate flag when 'subtree_check' is enabled on an export, it
should be OK to optimise away the write flushing behaviour in the cases
where it is clearly not needed.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
|
|
If there isn't a valid layout, or the layout stateid has changed, the
cleanup after a layout return should clear out the old data.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If there are still layout segments in the layout plh_return_lsegs list
after a layout return, we should be resetting the state to ensure they
eventually get returned as well.
Fixes: 68f744797edd ("pNFS: Do not free layout segments that are marked for return")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Fix to zone block devices to make the maximum segment count match what
the block layer is capable of"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd_zbc: block: Respect bio vector limits for REPORT ZONES buffer
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fixes for atomic writes (Alan Adamson)
- fixes for polled CQs in nvmet-epf (Damien Le Moal)
- fix for polled CQs in nvme-pci (Keith Busch)
- fix compile on odd configs that need to be forced to inline
(Kees Cook)
- one more quirk (Ilya Guterman)
- Fix for missing allocation of an integrity buffer for some cases
- Fix for a regression with ublk command cancelation
* tag 'block-6.15-20250515' of git://git.kernel.dk/linux:
ublk: fix dead loop when canceling io command
nvme-pci: add NVME_QUIRK_NO_DEEPEST_PS quirk for SOLIDIGM P44 Pro
nvme: all namespaces in a subsystem must adhere to a common atomic write size
nvme: multipath: enable BLK_FEAT_ATOMIC_WRITES for multipathing
nvmet: pci-epf: remove NVMET_PCI_EPF_Q_IS_SQ
nvmet: pci-epf: improve debug message
nvmet: pci-epf: cleanup nvmet_pci_epf_raise_irq()
nvmet: pci-epf: do not fall back to using INTX if not supported
nvmet: pci-epf: clear completion queue IRQ flag on delete
nvme-pci: acquire cq_poll_lock in nvme_poll_irqdisable
nvme-pci: make nvme_pci_npages_prp() __always_inline
block: always allocate integrity buffer when required
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a regression with highmem and mapping of regions, where
the coalescing code assumes any page is directly mapped
- Fix an issue with HYBRID_IOPOLL and passthrough commands,
where the timer wasn't always setup correctly
- Fix an issue with fdinfo not correctly locking around reading
the rings, which can be an issue if the ring is being resized
at the same time
* tag 'io_uring-6.15-20250515' of git://git.kernel.dk/linux:
io_uring/fdinfo: grab ctx->uring_lock around io_uring_show_fdinfo()
io_uring/memmap: don't use page_address() on a highmem page
io_uring/uring_cmd: fix hybrid polling initialization issue
|
|
Pull xfs fixes from Carlos Maiolino:
"This includes a bug fix for a possible data corruption vector on the
zoned allocator garbage collector"
* tag 'xfs-fixes-6.15-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Fix comment on xfs_trans_ail_update_bulk()
xfs: Fix a comment on xfs_ail_delete
xfs: Fail remount with noattr2 on a v5 with v4 enabled
xfs: fix zoned GC data corruption due to wrong bv_offset
xfs: free up mp->m_free[0].count in error case
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix ACPI PPTT parsing code to address a regression introduced recently
and add more sanity checking of data supplied by the platform firmware
to avoid using invalid data (Jeremy Linton)"
* tag 'acpi-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PPTT: Fix processor subtable walk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver specific fixes, the most substantial one being the
Tegra one which fixes spurious errors with default delays for chip
select hold times"
* tag 'spi-fix-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-sun4i: fix early activation
spi: tegra114: Use value to check for invalid delays
spi: loopback-test: Do not split 1024-byte hexdumps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"This fixes an invalid memory access in the MAX20086 driver which could
occur during error handling for failed probe due to a hidden use of
devres in the core DT parsing code"
* tag 'regulator-fix-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max20086: fix invalid memory access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an interrupt storm on system wake-up in gpio-pca953x
- fix an out-of-bounds write in gpio-virtuser
- update MAINTAINERS with an entry for the sloppy logic analyzer
* tag 'gpio-fixes-for-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: virtuser: fix potential out-of-bound write
gpio: pca953x: fix IRQ storm on system wake up
MAINTAINERS: add me as maintainer for the gpio sloppy logic analyzer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A handful small fixes. The only significant change is the fix for MIDI
2.0 UMP handling in ALSA sequencer, but as MIDI 2.0 stuff is still new
and rarely used, the impact should be pretty limited.
Other than that, quirks for USB-audio and a few cosmetic fixes and
changes in drivers that should be safe to apply"
* tag 'sound-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add sample rate quirk for Microdia JP001 USB Camera
ALSA: es1968: Add error handling for snd_pcm_hw_constraint_pow2()
ALSA: sh: SND_AICA should depend on SH_DMA_API
ALSA: usb-audio: Add sample rate quirk for Audioengine D1
ALSA: ump: Fix a typo of snd_ump_stream_msg_device_info
ALSA/hda: intel-sdw-acpi: Correct sdw_intel_acpi_scan() function parameter
ALSA: seq: Fix delivery of UMP events to group ports
|
|
Commit bbeb69ce3013 ("x86/mm: Remove CONFIG_HIGHMEM64G support") introduces
a new warning message MSG_HIGHMEM_TRIMMED, which accidentally introduces a
duplicated 'for for' in the warning message.
Remove this duplicated word.
This was noticed while reviewing for references to obsolete kernel build
config options.
Fixes: bbeb69ce3013 ("x86/mm: Remove CONFIG_HIGHMEM64G support")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: https://lore.kernel.org/r/20250516090810.556623-1-lukas.bulwahn@redhat.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Core Changes:
- Add timeslicing and allocation restriction for SVM
Driver Changes:
- Fix shrinker debugfs name
- Add HW workaround to Xe2
- Fix SVM when mixing GPU and CPU atomics
- Fix per client engine utilization due to active contexts
not saving timestamp with lite restore enabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/qil4scyn6ucnt43u5ju64bi7r7n5r36k4pz5rsh2maz7isle6g@lac3jpsjrrvs
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
dma-buf:
- Avoid memory reordering in fence handling
ivpu:
- Fix buffer size in debugfs code
meson:
- Avoid integer overflow in mode-clock calculations
panel-mipi-dbi:
- Fix output with drm_client_setup_with_fourcc()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250515125534.GA41174@linux.fritz.box
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.15-2025-05-14:
amdgpu:
- Fix CSA unmap
- Fix MALL size reporting on GFX11.5
- AUX fix
- DCN 3.5 fix
- VRR fix
- DP MST fix
- DML 2.1 fixes
- Silence DP AUX spam
- DCN 4.0.1 cursor fix
- VCN 4.0.5 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250514185117.758496-1-alexander.deucher@amd.com
|
|
Pull bcachefs fixes from Kent Overstreet:
"The main user reported ones are:
- Fix a btree iterator locking inconsistency that's been causing us
to go emergency read-only in evacuate: "Fix broken btree_path lock
invariants in next_node()"
- Minor btree node cache reclaim tweak that should help with OOMs:
don't set btree nodes as accessed on fill
- Fix a bch2_bkey_clear_rebalance() issue that was causing rebalance
to do needless work"
* tag 'bcachefs-2025-05-15' of git://evilpiepirate.org/bcachefs:
bcachefs: fix wrong arg to fsck_err()
bcachefs: Fix missing commit in backpointer to missing target
bcachefs: Fix accidental O(n^2) in fiemap
bcachefs: Fix set_should_be_locked() call in peek_slot()
bcachefs: Fix self deadlock
bcachefs: Don't set btree nodes as accessed on fill
bcachefs: Fix livelock in journal_entry_open()
bcachefs: Fix broken btree_path lock invariants in next_node()
bcachefs: Don't strip rebalance_opts from indirect extents
|
|
Pull rdma fixes from Jason Gunthorpe:
"Four small fixes for crashes:
- Double free in rxe
- UAF in irdma from early freeing the rf
- Off by one undoing the IRQ allocations during error unwind in irdma
- Another race with device rename and uevent generation. uevents
accesses the struct device name and UAF when it is changed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/core: Fix "KASAN: slab-use-after-free Read in ib_register_device" problem
ice, irdma: fix an off by one in error handling code
irdma: free iwdev->rf after removing MSI-X
RDMA/rxe: Fix slab-use-after-free Read in rxe_queue_cleanup bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"This fixes a KUnit issue, simplifies code, and adds new tests"
* tag 'landlock-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Improve bit operations in audit code
landlock: Remove KUnit test that triggers a warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix a few potential memory leaks in the wacom driver (Qasim Ijaz)
- AMD SFH fixes when there is only one SRA sensor (Mario Limonciello)
- HID-BPF dispatch UAF fix that happens on removal of the Logitech DJ
receiver (Rong Zhang)
- various minor fixes and usual device ID additions
* tag 'hid-for-linus-2025051501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: bpf: abort dispatch if device destroyed
HID: quirks: Add ADATA XPG alpha wireless mouse support
HID: hid-steam: Remove the unused variable connected
HID: amd_sfh: Avoid clearing reports for SRA sensor
HID: amd_sfh: Fix SRA sensor when it's the only sensor
HID: wacom: fix shift OOB in kfifo allocation for zero pktlen
HID: uclogic: Add NULL check in uclogic_input_configured()
HID: wacom: fix memory leak on size mismatch in wacom_wac_queue_flush()
HID: wacom: handle kzalloc() allocation failure in wacom_wac_queue_flush()
HID: thrustmaster: fix memory leak in thrustmaster_interrupts()
HID: hid-appletb-kbd: Fix wrong date and kernel version in sysfs interface docs
HID: bpf: fix BTN_STYLUS for the XP Pen ACK05 remote
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth and wireless.
A few more fixes for the locking changes trickling in. Nothing too
alarming, I suspect those will continue for another release. Other
than that things are slowing down nicely.
Current release - fix to a fix:
- Bluetooth: hci_event: use key encryption size when its known
- tools: ynl-gen: allow multi-attr without nested-attributes again
Current release - regressions:
- locking fixes:
- lock lower level devices when updating features
- eth: bnxt_en: bring back rtnl_lock() in the bnxt_open() path
- devmem: fix panic when Netlink socket closes after module unload
Current release - new code bugs:
- eth: txgbe: fixes for FW communication on new AML devices
Previous releases - always broken:
- sched: flush gso_skb list too during ->change(), avoid potential
null-deref on reconfig
- wifi: mt76: disable NAPI on driver removal
- hv_netvsc: fix error 'nvsp_rndis_pkt_complete error status: 2'"
* tag 'net-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
net: devmem: fix kernel panic when netlink socket close after module unload
tsnep: fix timestamping with a stacked DSA driver
net/tls: fix kernel panic when alloc_page failed
bnxt_en: bring back rtnl_lock() in the bnxt_open() path
mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
octeontx2-pf: Do not reallocate all ntuple filters
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
hv_netvsc: Remove rmsg_pgcnt
hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
octeontx2-af: Fix CGX Receive counters
net: ethernet: mtk_eth_soc: fix typo for declaration MT7988 ESW capability
net: libwx: Fix FW mailbox unknown command
net: libwx: Fix FW mailbox reply timeout
net: txgbe: Fix to calculate EEPROM checksum for AML devices
octeontx2-pf: macsec: Fix incorrect max transmit size in TX secy
...
|
|
Commit:
f40139fde527 ("ublk: fix race between io_uring_cmd_complete_in_task and
ublk_cancel_cmd")
adds a request state check in ublk_cancel_cmd(), and if the request is
started, skips canceling this uring_cmd.
However, the current uring_cmd may be in ACTIVE state, without block
request coming to the uring command. Meantime, if the cached request in
tag_set.tags[tag] has been delivered to ublk server and reycycled, then
this uring_cmd can't be canceled.
ublk requests are aborted in ublk char device release handler, which
depends on canceling all ACTIVE uring_cmd. So it causes a dead loop.
Fix this issue by not taking a stale request into account when canceling
uring_cmd in ublk_cancel_cmd().
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-block/mruqwpf4tqenkbtgezv5oxwq7ngyq24jzeyqy4ixzvivatbbxv@4oh2wzz4e6qn/
Fixes: f40139fde527 ("ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250515162601.77346-1-ming.lei@redhat.com
[axboe: rewording of commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, using PEBS-via-PT with a sample frequency instead of a sample
period, causes a segfault. For example:
BUG: kernel NULL pointer dereference, address: 0000000000000195
<NMI>
? __die_body.cold+0x19/0x27
? page_fault_oops+0xca/0x290
? exc_page_fault+0x7e/0x1b0
? asm_exc_page_fault+0x26/0x30
? intel_pmu_pebs_event_update_no_drain+0x40/0x60
? intel_pmu_pebs_event_update_no_drain+0x32/0x60
intel_pmu_drain_pebs_icl+0x333/0x350
handle_pmi_common+0x272/0x3c0
intel_pmu_handle_irq+0x10a/0x2e0
perf_event_nmi_handler+0x2a/0x50
That happens because intel_pmu_pebs_event_update_no_drain() assumes all the
pebs_enabled bits represent counter indexes, which is not always the case.
In this particular case, bits 60 and 61 are set for PEBS-via-PT purposes.
The behaviour of PEBS-via-PT with sample frequency is questionable because
although a PMI is generated (PEBS_PMI_AFTER_EACH_RECORD), the period is not
adjusted anyway.
Putting that aside, fix intel_pmu_pebs_event_update_no_drain() by passing
the mask of counter bits instead of 'size'. Note, prior to the Fixes
commit, 'size' would be limited to the maximum counter index, so the issue
was not hit.
Fixes: 722e42e45c2f1 ("perf/x86: Support counter mask")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20250508134452.73960-1-adrian.hunter@intel.com
|
|
Kernel panic occurs when a devmem TCP socket is closed after NIC module
is unloaded.
This is Devmem TCP unregistration scenarios. number is an order.
(a)netlink socket close (b)pp destroy (c)uninstall result
1 2 3 OK
1 3 2 (d)Impossible
2 1 3 OK
3 1 2 (e)Kernel panic
2 3 1 (d)Impossible
3 2 1 (d)Impossible
(a) netdev_nl_sock_priv_destroy() is called when devmem TCP socket is
closed.
(b) page_pool_destroy() is called when the interface is down.
(c) mp_ops->uninstall() is called when an interface is unregistered.
(d) There is no scenario in mp_ops->uninstall() is called before
page_pool_destroy().
Because unregister_netdevice_many_notify() closes interfaces first
and then calls mp_ops->uninstall().
(e) netdev_nl_sock_priv_destroy() accesses struct net_device to acquire
netdev_lock().
But if the interface module has already been removed, net_device
pointer is invalid, so it causes kernel panic.
In summary, there are only 3 possible scenarios.
A. sk close -> pp destroy -> uninstall.
B. pp destroy -> sk close -> uninstall.
C. pp destroy -> uninstall -> sk close.
Case C is a kernel panic scenario.
In order to fix this problem, It makes mp_dmabuf_devmem_uninstall() set
binding->dev to NULL.
It indicates an bound net_device was unregistered.
It makes netdev_nl_sock_priv_destroy() do not acquire netdev_lock()
if binding->dev is NULL.
A new binding->lock is added to protect a dev of a binding.
So, lock ordering is like below.
priv->lock
netdev_lock(dev)
binding->lock
Tests:
Scenario A:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
kill $pid
ip link set $interface down
modprobe -rv $module
Scenario B:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
ip link set $interface down
kill $pid
modprobe -rv $module
Scenario C:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
modprobe -rv $module
sleep 5
kill $pid
Splat looks like:
Oops: general protection fault, probably for non-canonical address 0xdffffc001fffa9f7: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
KASAN: probably user-memory-access in range [0x00000000fffd4fb8-0x00000000fffd4fbf]
CPU: 0 UID: 0 PID: 2041 Comm: ncdevmem Tainted: G B W 6.15.0-rc1+ #2 PREEMPT(undef) 0947ec89efa0fd68838b78e36aa1617e97ff5d7f
Tainted: [B]=BAD_PAGE, [W]=WARN
RIP: 0010:__mutex_lock (./include/linux/sched.h:2244 kernel/locking/mutex.c:400 kernel/locking/mutex.c:443 kernel/locking/mutex.c:605 kernel/locking/mutex.c:746)
Code: ea 03 80 3c 02 00 0f 85 4f 13 00 00 49 8b 1e 48 83 e3 f8 74 6a 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 34 48 89 fa 48 c1 ea 03 <0f> b6 f
RSP: 0018:ffff88826f7ef730 EFLAGS: 00010203
RAX: dffffc0000000000 RBX: 00000000fffd4f88 RCX: ffffffffaa9bc811
RDX: 000000001fffa9f7 RSI: 0000000000000008 RDI: 00000000fffd4fbc
RBP: ffff88826f7ef8b0 R08: 0000000000000000 R09: ffffed103e6aa1a4
R10: 0000000000000007 R11: ffff88826f7ef442 R12: fffffbfff669f65e
R13: ffff88812a830040 R14: ffff8881f3550d20 R15: 00000000fffd4f88
FS: 0000000000000000(0000) GS:ffff888866c05000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000563bed0cb288 CR3: 00000001a7c98000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
...
netdev_nl_sock_priv_destroy (net/core/netdev-genl.c:953 (discriminator 3))
genl_release (net/netlink/genetlink.c:653 net/netlink/genetlink.c:694 net/netlink/genetlink.c:705)
...
netlink_release (net/netlink/af_netlink.c:737)
...
__sock_release (net/socket.c:647)
sock_close (net/socket.c:1393)
Fixes: 1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250514154028.1062909-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This driver is susceptible to a form of the bug explained in commit
c26a2c2ddc01 ("gianfar: Fix TX timestamping with a stacked DSA driver")
and in Documentation/networking/timestamping.rst section "Other caveats
for MAC drivers", specifically it timestamps any skb which has
SKBTX_HW_TSTAMP, and does not consider if timestamping has been enabled
in adapter->hwtstamp_config.tx_type.
Evaluate the proper TX timestamping condition only once on the TX
path (in tsnep_xmit_frame_ring()) and store the result in an additional
TX entry flag. Evaluate the new TX entry flag in the TX confirmation path
(in tsnep_tx_poll()).
This way SKBTX_IN_PROGRESS is set by the driver as required, but never
evaluated. SKBTX_IN_PROGRESS shall not be evaluated as it can be set
by a stacked DSA driver and evaluating it would lead to unwanted
timestamps.
Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250514195657.25874-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We cannot set frag_list to NULL pointer when alloc_page failed.
It will be used in tls_strp_check_queue_ok when the next time
tls_strp_read_sock is called.
This is because we don't reset full_len in tls_strp_flush_anchor_copy()
so the recv path will try to continue handling the partial record
on the next call but we dettached the rcvq from the frag list.
Alternative fix would be to reset full_len.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000028
Call trace:
tls_strp_check_rcv+0x128/0x27c
tls_strp_data_ready+0x34/0x44
tls_data_ready+0x3c/0x1f0
tcp_data_ready+0x9c/0xe4
tcp_data_queue+0xf6c/0x12d0
tcp_rcv_established+0x52c/0x798
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Signed-off-by: Pengtao He <hept.hept.hept@gmail.com>
Link: https://patch.msgid.link/20250514132013.17274-1-hept.hept.hept@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of stragglers:
- mac80211: fix syzbot/ubsan in scan counted-by
- mt76: fix NAPI handling on driver remove
- mt67: fix multicast/ipv6 receive
* tag 'wireless-2025-05-15' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
====================
Link: https://patch.msgid.link/20250515121749.61912-4-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Error recovery, PCIe AER, resume, and TX timeout will invoke bnxt_open()
with netdev_lock only. This will cause RTNL assert failure in
netif_set_real_num_tx_queues(), netif_set_real_num_tx_queues(),
and netif_set_real_num_tx_queues().
Example error recovery assert:
RTNL: assertion failed at net/core/dev.c (3178)
WARNING: CPU: 3 PID: 3392 at net/core/dev.c:3178 netif_set_real_num_tx_queues+0x1fd/0x210
Call Trace:
<TASK>
? __pfx_bnxt_msix+0x10/0x10 [bnxt_en]
__bnxt_open_nic+0x1ef/0xb20 [bnxt_en]
bnxt_open+0xda/0x130 [bnxt_en]
bnxt_fw_reset_task+0x21f/0x780 [bnxt_en]
process_scheduled_works+0x9d/0x400
For now, bring back rtnl_lock() in all these code paths that can invoke
bnxt_open(). In the bnxt_queue_start() error path, we don't have
rtnl_lock held so we just change it to call netif_close() instead of
bnxt_reset_task() for simplicity. This error path is unlikely so it
should be fine.
Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250514062908.2766677-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver only offloads neighbors that are constructed on top of net
devices registered by it or their uppers (which are all Ethernet). The
device supports GRE encapsulation and decapsulation of forwarded
traffic, but the driver will not offload dummy neighbors constructed on
top of GRE net devices as they are not uppers of its net devices:
# ip link add name gre1 up type gre tos inherit local 192.0.2.1 remote 198.51.100.1
# ip neigh add 0.0.0.0 lladdr 0.0.0.0 nud noarp dev gre1
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 NOARP
(Note that the neighbor is not marked with 'offload')
When the driver is reloaded and the existing configuration is replayed,
the driver does not perform the same check regarding existing neighbors
and offloads the previously added one:
# devlink dev reload pci/0000:01:00.0
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 offload NOARP
If the neighbor is later deleted, the driver will ignore the
notification (given the GRE net device is not its upper) and will
therefore keep referencing freed memory, resulting in a use-after-free
[1] when the net device is deleted:
# ip neigh del 0.0.0.0 lladdr 0.0.0.0 dev gre1
# ip link del dev gre1
Fix by skipping neighbor replay if the net device for which the replay
is performed is not our upper.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x1ea/0x200
Read of size 8 at addr ffff888155b0e420 by task ip/2282
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
mlxsw_sp_neigh_entry_update+0x1ea/0x200
mlxsw_sp_router_rif_gone_sync+0x2a8/0x440
mlxsw_sp_rif_destroy+0x1e9/0x750
mlxsw_sp_netdevice_ipip_ol_event+0x3c9/0xdc0
mlxsw_sp_router_netdevice_event+0x3ac/0x15e0
notifier_call_chain+0xca/0x150
call_netdevice_notifiers_info+0x7f/0x100
unregister_netdevice_many_notify+0xc8c/0x1d90
rtnl_dellink+0x34e/0xa50
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x131/0x360
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x121/0x1b0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 8fdb09a7674c ("mlxsw: spectrum_router: Replay neighbours when RIF is made")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/c53c02c904fde32dad484657be3b1477884e9ad6.1747225701.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When starting the local sync timer to synchronize the state of a remote
CPU it should be added on the CPU to be synchronized, not the initiating
CPU. This results in interrupt delivery being delayed until the timer
eventually runs (due to another mask/unmask/migrate operation) on the
target CPU.
Fixes: 0f67911e821c ("irqchip/riscv-imsic: Separate next and previous pointers in IMSIC vector")
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/all/20250514171320.3494917-1-abrestic@rivosinc.com
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for linux 6.15
- fixes for atomic writes (Alan Adamson)
- fixes for polled CQs in nvmet-epf (Damien Le Moal)
- fix for polled CQs in nvme-pci (Keith Busch)
- fix compile on odd configs that need to be forced to inline
(Kees Cook)
- one more quirk (Ilya Guterman)"
* tag 'nvme-6.15-2025-05-15' of git://git.infradead.org/nvme:
nvme-pci: add NVME_QUIRK_NO_DEEPEST_PS quirk for SOLIDIGM P44 Pro
nvme: all namespaces in a subsystem must adhere to a common atomic write size
nvme: multipath: enable BLK_FEAT_ATOMIC_WRITES for multipathing
nvmet: pci-epf: remove NVMET_PCI_EPF_Q_IS_SQ
nvmet: pci-epf: improve debug message
nvmet: pci-epf: cleanup nvmet_pci_epf_raise_irq()
nvmet: pci-epf: do not fall back to using INTX if not supported
nvmet: pci-epf: clear completion queue IRQ flag on delete
nvme-pci: acquire cq_poll_lock in nvme_poll_irqdisable
nvme-pci: make nvme_pci_npages_prp() __always_inline
|
|
Felix Fietkau says:
===================
mt76 fix for 6.15
- disable napi on driver removal to fix warning
- fix multicast rx regression on mt7925
===================
Link: https://patch.msgid.link/3b526d06-b717-4d47-817c-a9f47b796a31@nbd.name/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Make sure that n_channels is set after allocating the
struct cfg80211_registered_device::int_scan_req member. Seen with
syzkaller:
UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:1208:5
index 0 is out of range for type 'struct ieee80211_channel *[] __counted_by(n_channels)' (aka 'struct ieee80211_channel *[]')
This was missed in the initial conversions because I failed to locate
the allocation likely due to the "sizeof(void *)" not matching the
"channels" array type.
Reported-by: syzbot+4bcdddd48bb6f0be0da1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/680fd171.050a0220.2b69d1.045e.GAE@google.com/
Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20250509184641.work.542-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Microdia JP001 does not support reading the sample rate which leads to
many lines of "cannot get freq at ep 0x84".
This patch adds the USB ID to quirks.c and avoids those error messages.
usb 7-4: New USB device found, idVendor=0c45, idProduct=636b, bcdDevice= 1.00
usb 7-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 7-4: Product: JP001
usb 7-4: Manufacturer: JP001
usb 7-4: SerialNumber: JP001
usb 7-4: 3:1: cannot get freq at ep 0x84
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Link: https://patch.msgid.link/20250515102132.73062-1-kwizart@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 157ae5ffd76a dmaengine: mediatek: Fix a possible deadlock error
in mtk_cqdma_tx_status() fixed locks but kept unused varibale leading to
warning and build failure (due to warning treated as errors)
drivers/dma/mediatek/mtk-cqdma.c: In function 'mtk_cqdma_find_active_desc':
drivers/dma/mediatek/mtk-cqdma.c:423:23: error: unused variable 'flags' [-Werror=unused-variable]
423 | unsigned long flags;
| ^~~~~
Fix by dropping this unused flag
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 157ae5ffd76a ("dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status()")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
If ntuple filters count is modified followed by
unicast filters count using devlink then the ntuple count
set by user is ignored and all the ntuple filters are
being reallocated. Fix this by storing the ntuple count
set by user. Without this patch, say if user tries
to modify ntuple count as 8 followed by ucast filter count as 4
using devlink commands then ntuple count is being reverted to
default value 16 i.e, not retaining user set value 8.
Fixes: 39c469188b6d ("octeontx2-pf: Add ucast filter count configurability via devlink.")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747054357-5850-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Ensure that the hdr_trans_tlv command is included in the broadcast wtbl to
prevent the IPv6 and multicast packet from being dropped by the chip.
Cc: stable@vger.kernel.org
Fixes: cb1353ef3473 ("wifi: mt76: mt7925: integrate *mlo_sta_cmd and *sta_cmd")
Reported-by: Benjamin Xiao <fossben@pm.me>
Tested-by: Niklas Schnelle <niks@kernel.org>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://lore.kernel.org/lkml/EmWnO5b-acRH1TXbGnkx41eJw654vmCR-8_xMBaPMwexCnfkvKCdlU5u19CGbaapJ3KRu-l3B-tSUhf8CCQwL0odjo6Cd5YG5lvNeB-vfdg=@pm.me/
Link: https://patch.msgid.link/20250509010421.403022-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
A warning on driver removal started occurring after commit 9dd05df8403b
("net: warn if NAPI instance wasn't shut down"). Disable tx napi before
deleting it in mt76_dma_cleanup().
WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100
CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy)
Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024
RIP: 0010:__netif_napi_del_locked+0xf0/0x100
Call Trace:
<TASK>
mt76_dma_cleanup+0x54/0x2f0 [mt76]
mt7921_pci_remove+0xd5/0x190 [mt7921e]
pci_device_remove+0x47/0xc0
device_release_driver_internal+0x19e/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x2e/0xb0
__do_sys_delete_module.isra.0+0x197/0x2e0
do_syscall_64+0x7b/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Tested with mt7921e but the same pattern can be actually applied to other
mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled
in their *_dma_init() functions and only toggled off and on again inside
their suspend/resume/reset paths. So it should be okay to disable tx
napi in such a generic way.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 2ac515a5d74f ("mt76: mt76x02: use napi polling for tx cleanup")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Tested-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250506115540.19045-1-pchelkin@ispras.ru
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Add proper pahole version dependency to CONFIG_GENDWARFKSYMS to avoid
module loading errors
- Fix UAPI header tests for the OpenRISC architecture
- Add dependency on the libdw package in Debian and RPM packages
- Disable -Wdefault-const-init-unsafe warnings on Clang
- Make "make clean ARCH=um" also clean the arch/x86/ directory
- Revert the use of -fmacro-prefix-map=, which causes issues with
debugger usability
* tag 'kbuild-fixes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: fix typos "module.builtin" to "modules.builtin"
Revert "kbuild, rust: use -fremap-path-prefix to make paths relative"
Revert "kbuild: make all file references relative to source root"
kbuild: fix dependency on sorttable
init: remove unused CONFIG_CC_CAN_LINK_STATIC
um: let 'make clean' properly clean underlying SUBARCH as well
kbuild: Disable -Wdefault-const-init-unsafe
kbuild: rpm-pkg: Add (elfutils-devel or libdw-devel) to BuildRequires
kbuild: deb-pkg: Add libdw-dev:native to Build-Depends-Arch
usr/include: openrisc: don't HDRTEST bpf_perf_event.h
kbuild: Require pahole <v1.28 or >v1.29 with GENDWARFKSYMS on X86
|
|
Michael Kelley says:
====================
hv_netvsc: Fix error "nvsp_rndis_pkt_complete error status: 2"
Starting with commit dca5161f9bd0 in the 6.3 kernel, the Linux driver
for Hyper-V synthetic networking (netvsc) occasionally reports
"nvsp_rndis_pkt_complete error status: 2".[1] This error indicates
that Hyper-V has rejected a network packet transmit request from the
guest, and the outgoing network packet is dropped. Higher level
network protocols presumably recover and resend the packet so there is
no functional error, but performance is slightly impacted. Commit
dca5161f9bd0 is not the cause of the error -- it only added reporting
of an error that was already happening without any notice. The error
has presumably been present since the netvsc driver was originally
introduced into Linux.
This patch set fixes the root cause of the problem, which is that the
netvsc driver in Linux may send an incorrectly formatted VMBus message
to Hyper-V when transmitting the network packet. The incorrect
formatting occurs when the rndis header of the VMBus message crosses a
page boundary due to how the Linux skb head memory is aligned. In such
a case, two PFNs are required to describe the location of the rndis
header, even though they are contiguous in guest physical address
(GPA) space. Hyper-V requires that two PFNs be in a single "GPA range"
data struture, but current netvsc code puts each PFN in its own GPA
range, which Hyper-V rejects as an error in the case of the rndis
header.
The incorrect formatting occurs only for larger packets that netvsc
must transmit via a VMBus "GPA Direct" message. There's no problem
when netvsc transmits a smaller packet by copying it into a pre-
allocated send buffer slot because the pre-allocated slots don't have
page crossing issues.
After commit 14ad6ed30a10 in the 6.14 kernel, the error occurs much
more frequently in VMs with 16 or more vCPUs. It may occur every few
seconds, or even more frequently, in a ssh session that outputs a lot
of text. Commit 14ad6ed30a10 subtly changes how skb head memory is
allocated, making it much more likely that the rndis header will cross
a page boundary when the vCPU count is 16 or more. The changes in
commit 14ad6ed30a10 are perfectly valid -- they just had the side
effect of making the netvsc bug more prominent.
One fix is to check for adjacent PFNs in vmbus_sendpacket_pagebuffer()
and just combine them into a single GPA range. Such a fix is very
contained. But conceptually it is fixing the problem at the wrong
level. So this patch set takes the broader approach of maintaining
the already known grouping of contiguous PFNs at a higher level in
the netvsc driver code, and propagating that grouping down to the
creation of the VMBus message to send to Hyper-V. Maintaining the
grouping fixes this problem, and has the added benefit of allowing
netvsc_dma_map() to make fewer calls to dma_map_single() to do bounce
buffering in CoCo VMs.
Patch 1 is a preparatory change to allow vmbus_sendpacket_mpb_desc()
to specify multiple GPA ranges. In current code
vmbus_sendpacket_mpb_desc() is used only by the storvsc synthetic SCSI
driver, and it always creates a single GPA range.
Patch 2 updates the netvsc driver to use vmbus_sendpacket_mpb_desc()
instead of vmbus_sendpacket_pagebuffer(). Because the higher levels of
netvsc still don't group contiguous PFNs, this patch is functionally
neutral. The VMBus message to Hyper-V still has many GPA ranges, each
with a single PFN. But it lays the groundwork for the next patch.
Patch 3 changes the higher levels of netvsc to preserve the already
known grouping of contiguous PFNs. When the contiguous groupings are
passed to vmbus_sendpacket_mpb_desc(), GPA ranges containing multiple
PFNs are produced, as expected by Hyper-V. This is point at which the
core problem is fixed.
Patches 4 and 5 remove code that is no longer necessary after the
previous patches.
These changes provide a net reduction of about 65 lines of code, which
is an added benefit.
These changes have been tested in normal VMs, in SEV-SNP and TDX CoCo
VMs, and in Dv6-series VMs where the netvsp implementation is in the
OpenHCL paravisor instead of the Hyper-V host.
These changes are built against kernel version 6.15-rc6.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=217503
====================
Link: https://patch.msgid.link/20250513000604.1396-1-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the netvsc driver changed to use vmbus_sendpacket_mpb_desc()
instead of vmbus_sendpacket_pagebuffer(), the latter has no remaining
callers. Remove it.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-6-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
init_page_array() now always creates a single page buffer array entry
for the rndis message, even if the rndis message crosses a page
boundary. As such, the number of page buffer array entries used for
the rndis message must no longer be tracked -- it is always just 1.
Remove the rmsg_pgcnt field and use "1" where the value is needed.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-5-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starting with commit dca5161f9bd0 ("hv_netvsc: Check status in
SEND_RNDIS_PKT completion message") in the 6.3 kernel, the Linux
driver for Hyper-V synthetic networking (netvsc) occasionally reports
"nvsp_rndis_pkt_complete error status: 2".[1] This error indicates
that Hyper-V has rejected a network packet transmit request from the
guest, and the outgoing network packet is dropped. Higher level
network protocols presumably recover and resend the packet so there is
no functional error, but performance is slightly impacted. Commit
dca5161f9bd0 is not the cause of the error -- it only added reporting
of an error that was already happening without any notice. The error
has presumably been present since the netvsc driver was originally
introduced into Linux.
The root cause of the problem is that the netvsc driver in Linux may
send an incorrectly formatted VMBus message to Hyper-V when
transmitting the network packet. The incorrect formatting occurs when
the rndis header of the VMBus message crosses a page boundary due to
how the Linux skb head memory is aligned. In such a case, two PFNs are
required to describe the location of the rndis header, even though
they are contiguous in guest physical address (GPA) space. Hyper-V
requires that two rndis header PFNs be in a single "GPA range" data
struture, but current netvsc code puts each PFN in its own GPA range,
which Hyper-V rejects as an error.
The incorrect formatting occurs only for larger packets that netvsc
must transmit via a VMBus "GPA Direct" message. There's no problem
when netvsc transmits a smaller packet by copying it into a pre-
allocated send buffer slot because the pre-allocated slots don't have
page crossing issues.
After commit 14ad6ed30a10 ("net: allow small head cache usage with
large MAX_SKB_FRAGS values") in the 6.14-rc4 kernel, the error occurs
much more frequently in VMs with 16 or more vCPUs. It may occur every
few seconds, or even more frequently, in an ssh session that outputs a
lot of text. Commit 14ad6ed30a10 subtly changes how skb head memory is
allocated, making it much more likely that the rndis header will cross
a page boundary when the vCPU count is 16 or more. The changes in
commit 14ad6ed30a10 are perfectly valid -- they just had the side
effect of making the netvsc bug more prominent.
Current code in init_page_array() creates a separate page buffer array
entry for each PFN required to identify the data to be transmitted.
Contiguous PFNs get separate entries in the page buffer array, and any
information about contiguity is lost.
Fix the core issue by having init_page_array() construct the page
buffer array to represent contiguous ranges rather than individual
pages. When these ranges are subsequently passed to
netvsc_build_mpb_array(), it can build GPA ranges that contain
multiple PFNs, as required to avoid the error "nvsp_rndis_pkt_complete
error status: 2". If instead the network packet is sent by copying
into a pre-allocated send buffer slot, the copy proceeds using the
contiguous ranges rather than individual pages, but the result of the
copying is the same. Also fix rndis_filter_send_request() to construct
a contiguous range, since it has its own page buffer array.
This change has a side benefit in CoCo VMs in that netvsc_dma_map()
calls dma_map_single() on each contiguous range instead of on each
page. This results in fewer calls to dma_map_single() but on larger
chunks of memory, which should reduce contention on the swiotlb.
Since the page buffer array now contains one entry for each contiguous
range instead of for each individual page, the number of entries in
the array can be reduced, saving 208 bytes of stack space in
netvsc_xmit() when MAX_SKG_FRAGS has the default value of 17.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=217503
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217503
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-4-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netvsc currently uses vmbus_sendpacket_pagebuffer() to send VMBus
messages. This function creates a series of GPA ranges, each of which
contains a single PFN. However, if the rndis header in the VMBus
message crosses a page boundary, the netvsc protocol with the host
requires that both PFNs for the rndis header must be in a single "GPA
range" data structure, which isn't possible with
vmbus_sendpacket_pagebuffer(). As the first step in fixing this, add a
new function netvsc_build_mpb_array() to build a VMBus message with
multiple GPA ranges, each of which may contain multiple PFNs. Use
vmbus_sendpacket_mpb_desc() to send this VMBus message to the host.
There's no functional change since higher levels of netvsc don't
maintain or propagate knowledge of contiguous PFNs. Based on its
input, netvsc_build_mpb_array() still produces a separate GPA range
for each PFN and the behavior is the same as with
vmbus_sendpacket_pagebuffer(). But the groundwork is laid for a
subsequent patch to provide the necessary grouping.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-3-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
vmbus_sendpacket_mpb_desc() is currently used only by the storvsc driver
and is hardcoded to create a single GPA range. To allow it to also be
used by the netvsc driver to create multiple GPA ranges, no longer
hardcode as having a single GPA range. Allow the calling driver to
specify the rangecount in the supplied descriptor.
Update the storvsc driver to reflect this new approach.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-2-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"A few last minute fixes for v6.15"
* tag 'tpmdd-next-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tis: Double the timeout B to 4s
char: tpm: tpm-buf: Add sanity check fallback in read helpers
tpm: Mask TPM RC in tpm2_start_auth_session()
|
|
Each CGX block supports 4 logical MACs (LMACS). Receive
counters CGX_CMR_RX_STAT0-8 are per LMAC and CGX_CMR_RX_STAT9-12
are per CGX.
Due a bug in previous patch, stale Per CGX counters values observed.
Fixes: 66208910e57a ("octeontx2-af: Support to retrieve CGX LMAC stats")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250513071554.728922-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since MTK_ESW_BIT is a bit number rather than a bitmap, it causes
MTK_HAS_CAPS to produce incorrect results. This leads to the ETH
driver not declaring MAC capabilities correctly for the MT7988 ESW.
Fixes: 445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/b8b37f409d1280fad9c4d32521e6207f63cd3213.1747110258.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the new SW-FW interaction, missing the error return if there is an
unknown command. It causes the driver to mistakenly believe that the
interaction is complete. This problem occurs when new driver is paired
with old firmware, which does not support the new mailbox commands.
Fixes: 2e5af6b2ae85 ("net: txgbe: Add basic support for new AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/64DBB705D35A0016+20250513021009.145708-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the new SW-FW interaction, the timeout waiting for the firmware to
return is too short. So that some mailbox commands cannot be completed.
Use the 'timeout' parameter instead of fixed timeout value for flexible
configuration.
Fixes: 2e5af6b2ae85 ("net: txgbe: Add basic support for new AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/5D5BDE3EA501BDB8+20250513021009.145708-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the new firmware version, the shadow ram reserves some space to store
I2C information, so the checksum calculation needs to skip this section.
Otherwise, the driver will fail to probe because the invalid EEPROM
checksum.
Fixes: 2e5af6b2ae85 ("net: txgbe: Add basic support for new AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1C6BF7A937237F5A+20250513021009.145708-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MASCEC hardware block has a field called maximum transmit size for
TX secy. Max packet size going out of MCS block has be programmed
taking into account full packet size which has L2 header,SecTag
and ICV. MACSEC offload driver is configuring max transmit size as
macsec interface MTU which is incorrect. Say with 1500 MTU of real
device, macsec interface created on top of real device will have MTU of
1468(1500 - (SecTag + ICV)). This is causing packets from macsec
interface of size greater than or equal to 1468 are not getting
transmitted out because driver programmed max transmit size as 1468
instead of 1514(1500 + ETH_HDR_LEN).
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747053756-4529-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some TC filters have actions listed as indexed arrays of nests
and some as just nests. They are all indexed arrays, the handling
is common across filters.
Fixes: 2267672a6190 ("doc/netlink/specs: Update the tc spec")
Link: https://patch.msgid.link/20250513221638.842532-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix up spelling of two attribute names. These are clearly typoes
and will prevent C codegen from working. Let's treat this as
a fix to get the correction into users' hands ASAP, and prevent
anyone depending on the wrong names.
Fixes: a1bcfde83669 ("doc/netlink/specs: Add a spec for tc")
Link: https://patch.msgid.link/20250513221316.841700-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With some Infineon chips the timeouts in tpm_tis_send_data (both B and
C) can reach up to about 2250 ms.
Timeout C is retried since
commit de9e33df7762 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices")
Timeout B still needs to be extended.
The problem is most commonly encountered with context related operation
such as load context/save context. These are issued directly by the
kernel, and there is no retry logic for them.
When a filesystem is set up to use the TPM for unlocking the boot fails,
and restarting the userspace service is ineffective. This is likely
because ignoring a load context/save context result puts the real TPM
state and the TPM state expected by the kernel out of sync.
Chips known to be affected:
tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54)
Description: SLB9672
Firmware Revision: 15.22
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
Firmware Revision: 7.83
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
Firmware Revision: 5.63
Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Fix Smatch-detected issue:
drivers/char/tpm/tpm-buf.c:208 tpm_buf_read_u8() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:225 tpm_buf_read_u16() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:242 tpm_buf_read_u32() error:
uninitialized symbol 'value'.
Zero-initialize the return values in tpm_buf_read_u8(), tpm_buf_read_u16(),
and tpm_buf_read_u32() to guard against uninitialized data in case of a
boundary overflow.
Add defensive initialization ensures the return values are always defined,
preventing undefined behavior if the unexpected happens.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm2_start_auth_session() does not mask TPM RC correctly from the callers:
[ 28.766528] tpm tpm0: A TPM error (2307) occurred start auth session
Process TPM RCs inside tpm2_start_auth_session(), and map them to POSIX
error codes.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 699e3efd6c64 ("tpm: Add HMAC session start and end functions")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Closes: https://lore.kernel.org/linux-integrity/Z_NgdRHuTKP6JK--@gondor.apana.org.au/
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential endless loop when discarding a block group when
disabling discard
- reinstate message when setting a large value of mount option 'commit'
- fix a folio leak when async extent submission fails
* tag 'for-6.15-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add back warning for mount option commit values exceeding 300
btrfs: fix folio leak in submit_one_async_extent()
btrfs: fix discard worker infinite loop after disabling discard
|
|
cifs_prepare_read() might be called with a disconnected channel, where
TCP_Server_Info::max_read is set to zero due to reconnect, so calling
->negotiate_rize() will set @rsize to default min IO size (64KiB) and
then logging
CIFS: VFS: SMB: Zero rsize calculated, using minimum value
65536
If the reconnect happens in cifsd thread, cifs_renegotiate_iosize()
will end up being called and then @rsize set to the expected value.
Since we can't rely on the value of @server->max_read by the time we
call cifs_prepare_read(), try to ->negotiate_rize() only if
@cifs_sb->ctx->rsize is zero.
Reported-by: Steve French <stfrench@microsoft.com>
Fixes: c59f7c9661b9 ("smb: client: ensure aligned IO sizes")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The response buffer for the CREATE request handled by smb311_posix_mkdir()
is leaked on the error path (goto err_free_rsp_buf) because the structure
pointer *rsp passed to free_rsp_buf() is not assigned until *after* the
error condition is checked.
As *rsp is initialised to NULL, free_rsp_buf() becomes a no-op and the leak
is instead reported by __kmem_cache_shutdown() upon subsequent rmmod of
cifs.ko if (and only if) the error path has been hit.
Pass rsp_iov.iov_base to free_rsp_buf() instead, similar to the code in
other functions in smb2pdu.c for which *rsp is assigned late.
Cc: stable@vger.kernel.org
Signed-off-by: Jethro Donaldson <devel@jro.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
fsck_err() needs the btree transaction passed to it if there is one - so
that it can unlock/relock around prompting userspace for fixing the
error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fsck wants to do transaction commits from an outer context; it may have
other repair to do (i.e. duplicate backpointers).
But when calling backpointer_not_found() from runtime code, i.e. runtime
self healing, we should be doing the commit - the outer context expects
to just be doing lookups.
This fixes bugs where we get stuck spinning, reported as "RCU lock hold
time warnings.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since bch2_seek_pagecache_data() searches for dirty data, we only want
to call it for holes in the extents btree - otherwise we have an
accidental O(n^2), as we repeatedly search the same range.
Reported-by: Marcin Mirosław <marcin@mejor.pl>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
set_should_be_locked() needs to be called before peek_key_cache(), which
traverses other paths and may do a trans unlock/relock.
This fixes an assertion pop in path_peek_slot(), when the path we're
using is unexpectedly not uptodate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Before invoking bch2_accounting_mem_mod_locked in
bch2_gc_accounting_done, we already write locked mark_lock,
in bch2_accounting_mem_insert, we lock mark_lock again.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prevent jobs that do lots of scanning (i.e. evacuatee, scrub) from
causing OOMs.
The shrinker code seems to be having issues when it doesn't do any
freeing because it's just flipping off the acccessed bit - and the
accessed bit shouldn't be set on first use anyways.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When the journal is low on space, we might do discards from
journal_res_get() -> journal_entry_open().
Make sure we set j->can_discard correctly, so that if we're low on space
but not because discards aren't keeping up we don't livelock.
Fixes: 8e4d28036c29 ("bcachefs: Don't aggressively discard the journal")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes btree locking assert pops users were seeing during evacuate:
https://github.com/koverstreet/bcachefs/issues/878
May 09 22:45:02 sharon kernel: bcachefs (68116e25-fa2d-4c6f-86c7-e8b431d792ae): bch2_btree_insert_node(): node not locked at level 1
May 09 22:45:02 sharon kernel: bch2_btree_node_rewrite [bcachefs]: watermark=btree no_check_rw alloc l=0-1 mode=none nodes_written=0 cl.remaining=2 journal_seq=0
May 09 22:45:02 sharon kernel: path: idx 1 ref 1:0 S B btree=alloc level=0 pos 0:3699637:0 0:3698012:1-0:3699637:0 bch2_move_btree.isra.0+0x1db/0x490 [bcachefs] uptodate 0 locks_want 2
May 09 22:45:02 sharon kernel: l=0 locks intent seq 4 node ffff8bd700c93600
May 09 22:45:02 sharon kernel: l=1 locks unlocked seq 1712 node ffff8bd6fd5e7a00
May 09 22:45:02 sharon kernel: l=2 locks unlocked seq 2295 node ffff8bd6cc725400
May 09 22:45:02 sharon kernel: l=3 locks unlocked seq 0 node 0000000000000000
Evacuate walks btree nodes with bch2_btree_iter_next_node() and rewrites
them, bch2_btree_update_start() upgrades the path to take intent locks
as far as it needs to.
But next_node() does low level unlock/relock calls on individual nodes,
and didn't handle the case where a path is supposed to be holding
multiple intent locks. If a path has locks_want > 1, it needs to be
either holding locks on all the btree nodes (at each level) requested,
or none of them.
Fix this with a bch2_btree_path_downgrade().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix bch2_bkey_clear_needs_rebalance(): indirect extents are never
supposed to have bch_extent_rebalance stripped off, because that's how
we get the IO path options when we don't have the original inode it
belonged to.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix sample code that uses trace_array_printk()
The sample code for in kernel use of trace_array (that creates an
instance for use within the kernel) and shows how to use
trace_array_printk() that writes into the created instance, used
trace_printk_init_buffers(). But that function is used to initialize
normal trace_printk() and produces the NOTICE banner which is not
needed for use of trace_array_printk(). The function to initialize
that is trace_array_init_printk() that takes the created trace array
instance as a parameter.
Update the sample code to reflect the proper usage.
- Fix preemption count output for stacktrace event
The tracing buffer shows the preempt count level when an event
executes. Because writing the event itself disables preemption, this
needs to be accounted for when recording. The stacktrace event did
not account for this so the output of the stacktrace event showed
preemption was disabled while the event that triggered the stacktrace
shows preemption is enabled and this leads to confusion. Account for
preemption being disabled for the stacktrace event.
The same happened for stack traces triggered by function tracer.
- Fix persistent ring buffer when trace_pipe is used
The ring buffer swaps the reader page with the next page to read from
the write buffer when trace_pipe is used. If there's only a page of
data in the ring buffer, this swap will cause the "commit" pointer
(last data written) to be on the reader page. If more data is written
to the buffer, it is added to the reader page until it falls off back
into the write buffer.
If the system reboots and the commit pointer is still on the reader
page, even if new data was written, the persistent buffer validator
will miss finding the commit pointer because it only checks the write
buffer and does not check the reader page. This causes the validator
to fail the validation and clear the buffer, where the new data is
lost.
There was a check for this, but it checked the "head pointer", which
was incorrect, because the "head pointer" always stays on the write
buffer and is the next page to swap out for the reader page. Fix the
logic to catch this case and allow the user to still read the data
after reboot.
* tag 'trace-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Fix persistent buffer when commit page is the reader page
ftrace: Fix preemption accounting for stacktrace filter command
ftrace: Fix preemption accounting for stacktrace trigger command
tracing: samples: Initialize trace_array_printk() with the correct function
|
|
The ring buffer is made up of sub buffers (sometimes called pages as they
are by default PAGE_SIZE). It has the following "pages":
"tail page" - this is the page that the next write will write to
"head page" - this is the page that the reader will swap the reader page with.
"reader page" - This belongs to the reader, where it will swap the head
page from the ring buffer so that the reader does not
race with the writer.
The writer may end up on the "reader page" if the ring buffer hasn't
written more than one page, where the "tail page" and the "head page" are
the same.
The persistent ring buffer has meta data that points to where these pages
exist so on reboot it can re-create the pointers to the cpu_buffer
descriptor. But when the commit page is on the reader page, the logic is
incorrect.
The check to see if the commit page is on the reader page checked if the
head page was the reader page, which would never happen, as the head page
is always in the ring buffer. The correct check would be to test if the
commit page is on the reader page. If that's the case, then it can exit
out early as the commit page is only on the reader page when there's only
one page of data in the buffer. There's no reason to iterate the ring
buffer pages to find the "commit page" as it is already found.
To trigger this bug:
# echo 1 > /sys/kernel/tracing/instances/boot_mapped/events/syscalls/sys_enter_fchownat/enable
# touch /tmp/x
# chown sshd /tmp/x
# reboot
On boot up, the dmesg will have:
Ring buffer meta [0] is from previous boot!
Ring buffer meta [1] is from previous boot!
Ring buffer meta [2] is from previous boot!
Ring buffer meta [3] is from previous boot!
Ring buffer meta [4] commit page not found
Ring buffer meta [5] is from previous boot!
Ring buffer meta [6] is from previous boot!
Ring buffer meta [7] is from previous boot!
Where the buffer on CPU 4 had a "commit page not found" error and that
buffer is cleared and reset causing the output to be empty and the data lost.
When it works correctly, it has:
# cat /sys/kernel/tracing/instances/boot_mapped/trace_pipe
<...>-1137 [004] ..... 998.205323: sys_enter_fchownat: __syscall_nr=0x104 (260) dfd=0xffffff9c (4294967196) filename=(0xffffc90000a0002c) user=0x3e8 (1000) group=0xffffffff (4294967295) flag=0x0 (0
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250513115032.3e0b97f7@gandalf.local.home
Fixes: 5f3b6e839f3ce ("ring-buffer: Validate boot range memory events")
Reported-by: Tasos Sahanidis <tasos@tasossah.com>
Tested-by: Tasos Sahanidis <tasos@tasossah.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The preemption count of the stacktrace filter command to trace ksys_read
is consistently incorrect:
$ echo ksys_read:stacktrace > set_ftrace_filter
<...>-453 [004] ...1. 38.308956: <stack trace>
=> ksys_read
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The root cause is that the trace framework disables preemption when
invoking the filter command callback in function_trace_probe_call:
preempt_disable_notrace();
probe_ops->func(ip, parent_ip, probe_opsbe->tr, probe_ops, probe->data);
preempt_enable_notrace();
Use tracing_gen_ctx_dec() to account for the preempt_disable_notrace(),
which will output the correct preemption count:
$ echo ksys_read:stacktrace > set_ftrace_filter
<...>-410 [006] ..... 31.420396: <stack trace>
=> ksys_read
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
Cc: stable@vger.kernel.org
Fixes: 36590c50b2d07 ("tracing: Merge irqflags + preempt counter.")
Link: https://lore.kernel.org/20250512094246.1167956-2-dolinux.peng@gmail.com
Signed-off-by: pengdonglin <dolinux.peng@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When using the stacktrace trigger command to trace syscalls, the
preemption count was consistently reported as 1 when the system call
event itself had 0 (".").
For example:
root@ubuntu22-vm:/sys/kernel/tracing/events/syscalls/sys_enter_read
$ echo stacktrace > trigger
$ echo 1 > enable
sshd-416 [002] ..... 232.864910: sys_read(fd: a, buf: 556b1f3221d0, count: 8000)
sshd-416 [002] ...1. 232.864913: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The root cause is that the trace framework disables preemption in __DO_TRACE before
invoking the trigger callback.
Use the tracing_gen_ctx_dec() that will accommodate for the increase of
the preemption count in __DO_TRACE when calling the callback. The result
is the accurate reporting of:
sshd-410 [004] ..... 210.117660: sys_read(fd: 4, buf: 559b725ba130, count: 40000)
sshd-410 [004] ..... 210.117662: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
Cc: stable@vger.kernel.org
Fixes: ce33c845b030c ("tracing: Dump stacktrace trigger to the corresponding instance")
Link: https://lore.kernel.org/20250512094246.1167956-1-dolinux.peng@gmail.com
Signed-off-by: pengdonglin <dolinux.peng@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fix from Kees Cook:
"This fixes a corner case for ASLR-disabled static-PIE brk collision
with vdso allocations:
- binfmt_elf: Move brk for static PIE even if ASLR disabled"
* tag 'execve-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf: Move brk for static PIE even if ASLR disabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These all address issues in devicetree files:
- The Rockchip rk3588j are now limited the same way as the vendor
kernel, to allow room for the industrial-grade temperature ranges.
- Seven more Rockchip fixes address minor issues with specific boards
- Invalid clk controller references in multiple amlogic chips, plus
one accidentally disabled audio on clock
- Two devicetree fixes for i.MX8MP boards, both for incorrect
regulator settings
- A power domain change for apple laptop touchbar, fixing
suspend/resume problems
- An incorrect DMA controller setting for sophgo cv18xx chips"
* tag 'soc-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: amazon: Fix simple-bus node name schema warnings
MAINTAINERS: delete email for Shiraz Hashim
arm64: dts: imx8mp-var-som: Fix LDO5 shutdown causing SD card timeout
arm64: dts: imx8mp: use 800MHz NoC OPP for nominal drive mode
arm64: dts: amlogic: dreambox: fix missing clkc_audio node
riscv: dts: sophgo: fix DMA data-width configuration for CV18xx
arm64: dts: rockchip: fix Sige5 RTC interrupt pin
arm64: dts: rockchip: Assign RT5616 MCLK rate on rk3588-friendlyelec-cm3588
arm64: dts: rockchip: Align wifi node name with bindings in CB2
arm64: dts: amlogic: g12: fix reference to unknown/untested PWM clock
arm64: dts: amlogic: gx: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8b: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8: fix reference to unknown/untested PWM clock
arm64: dts: apple: touchbar: Mark ps_dispdfr_be as always-on
mailmap: Update email for Asahi Lina
arm64: dts: rockchip: Fix mmc-pwrseq clock name on rock-pi-4
arm64: dts: rockchip: Use "regulator-fixed" for btreg on px30-engicam for vcc3v3-btreg
arm64: dts: rockchip: Add pinmuxing for eMMC on QNAP TS433
arm64: dts: rockchip: Remove overdrive-mode OPPs from RK3588J SoC dtsi
arm64: dts: rockchip: Allow Turing RK1 cooling fan to spin down
|
|
Context Timestamp (CTX_TIMESTAMP) in the LRC accumulates the run ticks
of the context, but only gets updated when the context switches out. In
order to check how long a context has been active before it switches
out, two things are required:
(1) Determine if the context is running:
To do so, we program the WA BB to set an initial value for CTX_TIMESTAMP
in the LRC. The value chosen is 1 since 0 is the initial value when the
LRC is initialized. During a query, we just check for this value to
determine if the context is active. If the context switched out, it
would overwrite this location with the actual CTX_TIMESTAMP MMIO value.
Note that WA BB runs as the last part of the context restore, so reusing
this LRC location will not clobber anything.
(2) Calculate the time that the context has been active for:
The CTX_TIMESTAMP ticks only when the context is active. If a context is
active, we just use the CTX_TIMESTAMP MMIO as the new value of
utilization. While doing so, we need to read the CTX_TIMESTAMP MMIO
for the specific engine instance. Since we do not know which instance
the context is running on until it is scheduled, we also read the
ENGINE_ID MMIO in the WA BB and store it in the PPHSWP.
Using the above 2 instructions in a WA BB, capture active context
utilization.
v2: (Matt Brost)
- This breaks TDR, fix it by saving the CTX_TIMESTAMP register
"drm/xe: Save CTX_TIMESTAMP mmio value instead of LRC value"
- Drop tile from LRC if using gt
"drm/xe: Save the gt pointer in LRC and drop the tile"
v3:
- Remove helpers for bb_per_ctx_ptr (Matt)
- Add define for context active value (Matt)
- Use 64 bit CTX TIMESTAMP for platforms that support it. For platforms
that don't, live with the rare race. (Matt, Lucas)
- Convert engine id to hwe and get the MMIO value (Lucas)
- Correct commit message on when WA BB runs (Lucas)
v4:
- s/GRAPHICS_VER(...)/xe->info.has_64bit_timestamp/ (Matt)
- Drop support for active utilization on a VF (CI failure)
- In xe_lrc_init ensure the lrc value is 0 to begin with (CI regression)
v5:
- Minor checkpatch fix
- Squash into previous commit and make TDR use 32-bit time
- Update code comment to match commit msg
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4532
Cc: <stable@vger.kernel.org> # v6.13+
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250509161159.2173069-8-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 82b98cadb01f63cdb159e596ec06866d00f8e8c7)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Save the gt pointer in the lrc so that it can used for gt based helpers.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250509161159.2173069-7-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 741d3ef8b8b88fab2729ca89de1180e49bc9cef0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
For determining actual job execution time, save the current value of the
CTX_TIMESTAMP register rather than the value saved in LRC since the
current register value is the closest to the start time of the job.
v2: Define MI_STORE_REGISTER_MEM to fix compile error
v3: Place MI_STORE_REGISTER_MEM sorted by MI_INSTR (Lucas)
Fixes: 65921374c48f ("drm/xe: Emit ctx timestamp copy in ring ops")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250509161159.2173069-6-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 38b14233e5deff51db8faec287b4acd227152246)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Ensure GPU can make forward progress on an atomic SVM GPU fault by
giving the GPU a timeslice of 5ms
v2:
- Reduce timeslice to 5ms
- Double timeslice on retry
- Split out GPU SVM changes into independent patch
v5:
- Double timeslice in a few more places
Fixes: 2f118c949160 ("drm/xe: Add SVM VRAM migration")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-5-matthew.brost@intel.com
(cherry picked from commit a5d8d3be1dea8154edbbea481081469627665659)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Add timeslicing support to GPU SVM which will guarantee the GPU a
minimum execution time on piece of physical memory before migration back
to CPU. Intended to implement strict migration policies which require
memory to be in a certain placement for correct execution.
Required for shared CPU and GPU atomics on certain devices.
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-4-matthew.brost@intel.com
(cherry picked from commit 8dc1812b5b3a42311d28eb385eed88e2053ad3cb)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Mixing GPU and CPU atomics does not work unless a strict migration
policy of GPU atomics must be device memory. Enforce a policy of must be
in VRAM with a retry loop of 3 attempts, if retry loop fails abort
fault.
Removing always_migrate_to_vram modparam as we now have real migration
policy.
v2:
- Only retry migration on atomics
- Drop alway migrate modparam
v3:
- Only set vram_only on DGFX (Himal)
- Bail on get_pages failure if vram_only and retry count exceeded (Himal)
- s/vram_only/devmem_only
- Update xe_svm_range_is_valid to accept devmem_only argument
v4:
- Fix logic bug get_pages failure
v5:
- Fix commit message (Himal)
- Mention removing always_migrate_to_vram in commit message (Lucas)
- Fix xe_svm_range_is_valid to check for devmem pages
- Bail on devmem_only && !migrate_devmem (Thomas)
v6:
- Add READ_ONCE barriers for opportunistic checks (Thomas)
- Pair READ_ONCE with WRITE_ONCE (Thomas)
v7:
- Adjust comments (Thomas)
Fixes: 2f118c949160 ("drm/xe: Add SVM VRAM migration")
Cc: stable@vger.kernel.org
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-3-matthew.brost@intel.com
(cherry picked from commit a9ac0fa455b050d03e3032501368048fb284d318)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
This commit adds a new flag, devmem_only, to the drm_gpusvm structure. The
purpose of this flag is to ensure that the get_pages function allocates
memory exclusively from the device's memory. If the allocation from
device memory fails, the function will return an -EFAULT error.
Required for shared CPU and GPU atomics on certain devices.
v3:
- s/vram_only/devmem_only/
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-2-matthew.brost@intel.com
(cherry picked from commit 8a9b978ebd47df9e0694c34748c2d6fa0c31eb4d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Add Wa_22021007897 for the Xe2_HPG (graphics version: 20.01) IP. It is
a permanent workaround, and applicable on all the steppings.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com>
Link: https://lore.kernel.org/r/20250512065004.2576-1-aradhya.bhatia@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit e5c13e2c505b73a8667ef9a0fd5cbd4227e483e6)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
On VCN v4.0.5 there is a race condition where the WPTR is not
updated after starting from idle when doorbell is used. Adding
register read-back after written at function end is to ensure
all register writes are done before they can be used.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12528
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 07c9db090b86e5211188e1b351303fbc673378cf)
Cc: stable@vger.kernel.org
|
|
software cursor"
This reverts commit 272e6aab14bbf98d7a06b2b1cd6308a02d4a10a1.
Applying degamma curve to the cursor by default breaks Linux userspace
expectation.
On Linux, AMD display manager enables cursor degamma ROM just for
implict sRGB on HW versions where degamma is split into two blocks:
degamma ROM for pre-defined TFs and `gamma correction` for user/custom
curves, and degamma ROM settings doesn't apply to cursor plane.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1513
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803
Reported-by: Michel Dänzer <michel.daenzer@mailbox.org>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4144
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f6a305d4748801a6c799ae9375b2ecff3aed094b)
Cc: stable@vger.kernel.org
|
|
If navi_amd_register_client() fails, the previous i2c_dw_probe() call
should be undone by a corresponding i2c_del_adapter() call, as already done
in the remove function.
Fixes: 17631e8ca2d3 ("i2c: designware: Add driver support for AMD NAVI GPU")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <stable@vger.kernel.org> # v5.13+
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/fcd9651835a32979df8802b2db9504c523a8ebbb.1747158983.git.christophe.jaillet@wanadoo.fr
|
|
This commit adds the NVME_QUIRK_NO_DEEPEST_PS quirk for device
[126f:2262], which belongs to device SOLIDIGM P44 Pro SSDPFKKW020X7
The device frequently have trouble exiting the deepest power state (5),
resulting in the entire disk being unresponsive.
Verified by setting nvme_core.default_ps_max_latency_us=10000 and
observing the expected behavior.
Signed-off-by: Ilya Guterman <amfernusus@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 1c000dcaad2be ("irqchip/irq-msi-lib: Optionally set default
irq_eoi()/irq_ack()") added blanket MSI_CHIP_FLAG_SET_ACK flags,
irrespective of whether the underlying irqchip required it or not.
Drop it from a number of drivers that do not require it.
Fixes: 1c000dcaad2be ("irqchip/irq-msi-lib: Optionally set default irq_eoi()/irq_ack()")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-6-maz@kernel.org
|
|
arch_uprobe_skip_sstep() returns true if instruction was emulated, that
is to say, there is no need to single step for the emulated instructions.
regs->csr_era will point to the destination address directly after the
exception, so the resume_era related code is redundant, just remove them.
Cc: stable@vger.kernel.org
Fixes: 19bc6cb64092 ("LoongArch: Add uprobes support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When executing the "perf probe" and "perf stat" test cases about some
cryptographic algorithm, the output shows that "Trace/breakpoint trap".
This is because it uses the software singlestep breakpoint for uprobes
on LoongArch, and no need to use the hardware singlestep. So just remove
the related function call to user_{en,dis}able_single_step() for uprobes
on LoongArch.
How to reproduce:
Please make sure CONFIG_UPROBE_EVENTS is set and openssl supports sm2
algorithm, then execute the following command.
cd tools/perf && make
./perf probe -x /usr/lib64/libcrypto.so BN_mod_mul_montgomery
./perf stat -e probe_libcrypto:BN_mod_mul_montgomery openssl speed sm2
Cc: stable@vger.kernel.org
Fixes: 19bc6cb64092 ("LoongArch: Add uprobes support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Save and restore CSR.CNTC for hibernation which is similar to suspend.
For host this is unnecessary because sched clock is ensured continuous,
but for kvm guest sched clock isn't enough because rdtime.d should also
be continuous.
Host::rdtime.d = Host::CSR.CNTC + counter
Guest::rdtime.d = Host::CSR.CNTC + Host::CSR.GCNTC + Guest::CSR.CNTC + counter
so,
Guest::rdtime.d = Host::rdtime.d + Host::CSR.GCNTC + Guest::CSR.CNTC
To ensure Guest::rdtime.d continuous, Host::rdtime.d should be at first
continuous, while Host::CSR.GCNTC / Guest::CSR.CNTC is maintained by KVM.
Cc: stable@vger.kernel.org
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Now arch_cpu_idle() is annotated with __cpuidle which means it is in
the .cpuidle.text section, but __arch_cpu_idle() isn't. Thus, fix the
missing .cpuidle.text section assignment for __arch_cpu_idle() in order
to correct backtracing with nmi_backtrace().
The principle is similar to the commit 97c8580e85cf81c ("MIPS: Annotate
cpu_wait implementations with __cpuidle")
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Fix MAX_REG_OFFSET calculation, make it point to the last register
in 'struct pt_regs' and not to the marker itself, which could allow
regs_get_register() to return an invalid offset.
Cc: stable@vger.kernel.org
Fixes: 803b0fc5c3f2baa6e5 ("LoongArch: Add process management")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When CONFIG_PREEMPT_COUNT is not configured (i.e. CONFIG_PREEMPT_NONE/
CONFIG_PREEMPT_VOLUNTARY), preempt_disable() / preempt_enable() merely
acts as a barrier(). However, in these cases cond_resched() can still
trigger a context switch and modify the CSR.EUEN, resulting in do_fpu()
exception being activated within the kernel-fpu critical sections, as
demonstrated in the following path:
dcn32_calculate_wm_and_dlg()
DC_FP_START()
dcn32_calculate_wm_and_dlg_fpu()
dcn32_find_dummy_latency_index_for_fw_based_mclk_switch()
dcn32_internal_validate_bw()
dcn32_enable_phantom_stream()
dc_create_stream_for_sink()
kzalloc(GFP_KERNEL)
__kmem_cache_alloc_node()
__cond_resched()
DC_FP_END()
This patch is similar to commit d02198550423a0b (x86/fpu: Improve crypto
performance by making kernel-mode FPU reliably usable in softirqs). It
uses local_bh_disable() instead of preempt_disable() for non-RT kernels
so it can avoid the cond_resched() issue, and also extend the kernel-fpu
application scenarios to the softirq context.
Cc: stable@vger.kernel.org
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
For fsl,imx93-edma4 two DMA channels share the same interrupt.
So in case fsl_edma3_tx_handler is called for the "wrong"
channel, the return code must be IRQ_NONE. This signalize that
the interrupt wasn't handled.
Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Joy Zou <joy.zou@nxp.com>
Link: https://lore.kernel.org/r/20250424114829.9055-1-wahrenst@gmx.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix a potential deadlock bug. Observe that in the mtk-cqdma.c
file, functions like mtk_cqdma_issue_pending() and
mtk_cqdma_free_active_desc() properly acquire the pc lock before the vc
lock when handling pc and vc fields. However, mtk_cqdma_tx_status()
violates this order by first acquiring the vc lock before invoking
mtk_cqdma_find_active_desc(), which subsequently takes the pc lock. This
reversed locking sequence (vc → pc) contradicts the established
pc → vc order and creates deadlock risks.
Fix the issue by moving the vc lock acquisition code from
mtk_cqdma_find_active_desc() to mtk_cqdma_tx_status(). Ensure the pc lock
is acquired before the vc lock in the calling function to maintain correct
locking hierarchy. Note that since mtk_cqdma_find_active_desc() is a
static function with only one caller (mtk_cqdma_tx_status()), this
modification safely eliminates the deadlock possibility without affecting
other components.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency bugs
including deadlocks, data races and atomicity violations.
Fixes: b1f01e48df5a ("dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250508073634.3719-1-chenqiuji666@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The fix to block access from different address space did not return a
correct value for ->poll() change. kernel test bot reported that a
return value of type __poll_t is expected rather than int. Fix to return
POLLNVAL to indicate invalid request.
Fixes: 8dfa57aabff6 ("dmaengine: idxd: Fix allowing write() from different address spaces")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505081851.rwD7jVxg-lkp@intel.com/
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250508170548.2747425-1-dave.jiang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The idxd_cleanup() helper cleans up perfmon, interrupts, internals and
so on. Refactor remove call with the idxd_cleanup() helper to avoid code
duplication. Note, this also fixes the missing put_device() for idxd
groups, enginces and wqs.
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Cc: stable@vger.kernel.org
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250404120217.48772-10-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The remove call stack is missing idxd cleanup to free bitmap, ida and
the idxd_device. Call idxd_free() helper routines to make sure we exit
gracefully.
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Cc: stable@vger.kernel.org
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250404120217.48772-9-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Memory allocated for idxd is not freed if an error occurs during
idxd_pci_probe(). To fix it, free the allocated memory in the reverse
order of allocation before exiting the function in case of an error.
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404120217.48772-8-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Memory allocated for idxd is not freed if an error occurs during
idxd_alloc(). To fix it, free the allocated memory in the reverse order
of allocation before exiting the function in case of an error.
Fixes: a8563a33a5e2 ("dmanegine: idxd: reformat opcap output to match bitmap_parse() input")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404120217.48772-7-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The idxd_cleanup_internals() function only decreases the reference count
of groups, engines, and wqs but is missing the step to release memory
resources.
To fix this, use the cleanup helper to properly release the memory
resources.
Fixes: ddf742d4f3f1 ("dmaengine: idxd: Add missing cleanup for early error out in probe call")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250404120217.48772-6-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The idxd_setup_internals() is missing some cleanup when things fail in
the middle.
Add the appropriate cleanup routines:
- cleanup groups
- cleanup enginces
- cleanup wqs
to make sure it exits gracefully.
Fixes: defe49f96012 ("dmaengine: idxd: fix group conf_dev lifetime")
Cc: stable@vger.kernel.org
Suggested-by: Fenghua Yu <fenghuay@nvidia.com>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250404120217.48772-5-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Memory allocated for groups is not freed if an error occurs during
idxd_setup_groups(). To fix it, free the allocated memory in the reverse
order of allocation before exiting the function in case of an error.
Fixes: defe49f96012 ("dmaengine: idxd: fix group conf_dev lifetime")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404120217.48772-4-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Memory allocated for engines is not freed if an error occurs during
idxd_setup_engines(). To fix it, free the allocated memory in the
reverse order of allocation before exiting the function in case of an
error.
Fixes: 75b911309060 ("dmaengine: idxd: fix engine conf_dev lifetime")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404120217.48772-3-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Memory allocated for wqs is not freed if an error occurs during
idxd_setup_wqs(). To fix it, free the allocated memory in the reverse
order of allocation before exiting the function in case of an error.
Fixes: 7c5dd23e57c1 ("dmaengine: idxd: fix wq conf_dev 'struct device' lifetime")
Fixes: 700af3a0a26c ("dmaengine: idxd: add 'struct idxd_dev' as wrapper for conf_dev")
Fixes: de5819b99489 ("dmaengine: idxd: track enabled workqueues in bitmap")
Fixes: b0325aefd398 ("dmaengine: idxd: add WQ operation cap restriction support")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404120217.48772-2-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This function doesn't take the AIL lock, but should be called
with AIL lock held. Also (hopefuly) simplify the comment.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
It doesn't return anything.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Bug: When we compile the kernel with CONFIG_XFS_SUPPORT_V4=y,
remount with "-o remount,noattr2" on a v5 XFS does not
fail explicitly.
Reproduction:
mkfs.xfs -f /dev/loop0
mount /dev/loop0 /mnt/scratch
mount -o remount,noattr2 /dev/loop0 /mnt/scratch
However, with CONFIG_XFS_SUPPORT_V4=n, the remount
correctly fails explicitly. This is because the way the
following 2 functions are defined:
static inline bool xfs_has_attr2 (struct xfs_mount *mp)
{
return !IS_ENABLED(CONFIG_XFS_SUPPORT_V4) ||
(mp->m_features & XFS_FEAT_ATTR2);
}
static inline bool xfs_has_noattr2 (const struct xfs_mount *mp)
{
return mp->m_features & XFS_FEAT_NOATTR2;
}
xfs_has_attr2() returns true when CONFIG_XFS_SUPPORT_V4=n
and hence, the following if condition in
xfs_fs_validate_params() succeeds and returns -EINVAL:
/*
* We have not read the superblock at this point, so only the attr2
* mount option can set the attr2 feature by this stage.
*/
if (xfs_has_attr2(mp) && xfs_has_noattr2(mp)) {
xfs_warn(mp, "attr2 and noattr2 cannot both be specified.");
return -EINVAL;
}
With CONFIG_XFS_SUPPORT_V4=y, xfs_has_attr2() always return
false and hence no error is returned.
Fix: Check if the existing mount has crc enabled(i.e, of
type v5 and has attr2 enabled) and the
remount has noattr2, if yes, return -EINVAL.
I have tested xfs/{189,539} in fstests with v4
and v5 XFS with both CONFIG_XFS_SUPPORT_V4=y/n and
they both behave as expected.
This patch also fixes remount from noattr2 -> attr2 (on a v4 xfs).
Related discussion in [1]
[1] https://lore.kernel.org/all/Z65o6nWxT00MaUrW@dread.disaster.area/
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_zone_gc_write_chunk writes out the data buffer read in earlier using
the same bio, and currenly looks at bv_offset for the offset into the
scratch folio for that. But commit 26064d3e2b4d ("block: fix adding
folio to bio") changed how bv_page and bv_offset are calculated for
adding larger folios, breaking this fragile logic.
Switch to extracting the full physical address from the old bio_vec,
and calculate the offset into the folio from that instead.
This fixes data corruption during garbage collection with heavy rockdsb
workloads. Thanks to Hans for tracking down the culprit commit during
long bisection sessions.
Fixes: 26064d3e2b4d ("block: fix adding folio to bio")
Fixes: 080d01c41d44 ("xfs: implement zoned garbage collection")
Reported-by: Hans Holmberg <Hans.Holmberg@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <Hans.Holmberg@wdc.com>
Tested-by: Hans Holmberg <Hans.Holmberg@wdc.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
In xfs_init_percpu_counters(), memory for mp->m_free[0].count wasn't freed
in error case. Free it up in this patch.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Fixes: 712bae96631852 ("xfs: generalize the freespace and reserved blocks handling")
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
smp_store_mb() inserts memory barrier after storing operation.
It is different with what the comment is originally aiming so Null
pointer dereference can be happened if memory update is reordered.
Signed-off-by: Hyejeong Choi <hjeong.choi@samsung.com>
Fixes: a590d0fdbaa5 ("dma-buf: Update reservation shared_count after adding the new fence")
CC: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250513020638.GA2329653@au1-maretx-p37.eng.sarc.samsung.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
The first namespace configured in a subsystem sets the subsystem's
atomic write size based on its AWUPF or NAWUPF. Subsequent namespaces
must have an atomic write size (per their AWUPF or NAWUPF) less than or
equal to the subsystem's atomic write size, or their probing will be
rejected.
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
[hch: fold in review comments from John Garry]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
|
|
Not everything requires locking in there, which is why the 'has_lock'
variable exists. But enough does that it's a bit unwieldy to manage.
Wrap the whole thing in a ->uring_lock trylock, and just return
with no output if we fail to grab it. The existing trylock() will
already have greatly diminished utility/output for the failure case.
This fixes an issue with reading the SQE fields, if the ring is being
actively resized at the same time.
Reported-by: Jann Horn <jannh@google.com>
Fixes: 79cfe9e59c2a ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If device_add() fails, do not use device_unregister() for error
handling. device_unregister() consists two functions: device_del() and
put_device(). device_unregister() should only be called after
device_add() succeeded because device_del() undoes what device_add()
does if successful. Change device_unregister() to put_device() call
before returning from the function.
As comment of device_add() says, 'if device_add() succeeds, you should
call device_del() when you want to get rid of it. If device_add() has
not succeeded, use only put_device() to drop the reference count'.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250303072739.3874987-1-make24@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
phy-rcar-gen3-usb2 driver exports 4 PHYs. The timing registers are common
to all PHYs. There is no need to set them every time a PHY is initialized.
Set timing register only when the 1st PHY is initialized.
Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver")
Cc: stable@vger.kernel.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250507125032.565017-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Assert PLL reset on PHY power off. This saves power.
Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver")
Cc: stable@vger.kernel.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are
requested and configured by PHY users. The struct phy_ops APIs access the
same set of registers to configure all PHYs. Additionally, PHY settings can
be modified through sysfs or an IRQ handler. While some struct phy_ops APIs
are protected by a driver-wide mutex, others rely on individual
PHY-specific mutexes.
This approach can lead to various issues, including:
1/ the IRQ handler may interrupt PHY settings in progress, racing with
hardware configuration protected by a mutex lock
2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread
suspends to wait for the delay, another thread may try to configure
another PHY (with phy_init() + phy_power_on()); re-running the
phy_init() goes to the exact same configuration code, re-running the
same hardware configuration on the same set of registers (and bits)
which might impact the result of the msleep for the 1st configuring
thread
3/ sysfs can configure the hardware (though role_store()) and it can
still race with the phy_init()/phy_power_on() APIs calling into the
drivers struct phy_ops
To address these issues, add a spinlock to protect hardware register access
and driver private data structures (e.g., calls to
rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains
necessary as all PHY instances share common settings. With this change,
the existing mutex protection is removed and the cleanup.h helpers are
used.
While at it, to keep the code simpler, do not skip
regulator_enable()/regulator_disable() APIs in
rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the
regulators enable/disable operations are reference counted anyway.
Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver")
Cc: stable@vger.kernel.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 08b0ad375ca6 ("phy: renesas: rcar-gen3-usb2: move IRQ registration
to init") moved the IRQ request operation from probe to
struct phy_ops::phy_init API to avoid triggering interrupts (which lead to
register accesses) while the PHY clocks (enabled through runtime PM APIs)
are not active. If this happens, it results in a synchronous abort.
One way to reproduce this issue is by enabling CONFIG_DEBUG_SHIRQ, which
calls free_irq() on driver removal.
Move the IRQ request and free operations back to probe, and take the
runtime PM state into account in IRQ handler. This commit is preparatory
for the subsequent fixes in this series.
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250507125032.565017-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
It has been observed on the Renesas RZ/G3S SoC that unbinding and binding
the PHY driver leads to role autodetection failures. This issue occurs when
PHY 3 is the first initialized PHY. PHY 3 does not have an interrupt
associated with the USB2_INT_ENABLE register (as
rcar_gen3_int_enable[3] = 0). As a result, rcar_gen3_init_otg() is called
to initialize OTG without enabling PHY interrupts.
To resolve this, add rcar_gen3_is_any_otg_rphy_initialized() and call it in
role_store(), role_show(), and rcar_gen3_init_otg(). At the same time,
rcar_gen3_init_otg() is only called when initialization for a PHY with
interrupt bits is in progress. As a result, the
struct rcar_gen3_phy::otg_initialized is no longer needed.
Fixes: 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs")
Cc: stable@vger.kernel.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250507125032.565017-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We used to take a lock in tegra186_utmi_bias_pad_power_on() but now we
have moved the lock into the caller. Unfortunately, when we moved the
lock this unlock was left behind and it results in a double unlock.
Delete it now.
Fixes: b47158fb4295 ("phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/aAjmR6To4EnvRl4G@stanley.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The function snd_es1968_capture_open() calls the function
snd_pcm_hw_constraint_pow2(), but does not check its return
value. A proper implementation can be found in snd_cx25821_pcm_open().
Add error handling for snd_pcm_hw_constraint_pow2() and propagate its
error code.
Fixes: b942cf815b57 ("[ALSA] es1968 - Fix stuttering capture")
Cc: stable@vger.kernel.org # v2.6.22
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250514092444.331-1-vulab@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The hardware supports multiple MAC types, including RPM, SDP, and LBK.
However, features such as link settings and pause frames are only available
on RPM MAC, and not supported on SDP or LBK.
This patch updates the ethtool operations logic accordingly to reflect
this behavior.
Fixes: 2f7f33a09516 ("octeontx2-pf: Add representors for sdp MAC")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
max20086_parse_regulators_dt() calls of_regulator_match() using an
array of struct of_regulator_match allocated on the stack for the
matches argument.
of_regulator_match() calls devm_of_regulator_put_matches(), which calls
devres_alloc() to allocate a struct devm_of_regulator_matches which will
be de-allocated using devm_of_regulator_put_matches().
struct devm_of_regulator_matches is populated with the stack allocated
matches array.
If the device fails to probe, devm_of_regulator_put_matches() will be
called and will try to call of_node_put() on that stack pointer,
generating the following dmesg entries:
max20086 6-0028: Failed to read DEVICE_ID reg: -121
kobject: '\xc0$\xa5\x03' (000000002cebcb7a): is not initialized, yet
kobject_put() is being called.
Followed by a stack trace matching the call flow described above.
Switch to allocating the matches array using devm_kcalloc() to
avoid accessing the stack pointer long after it's out of scope.
This also has the advantage of allowing multiple max20086 to probe
without overriding the data stored inside the global of_regulator_match.
Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Link: https://patch.msgid.link/20250508064947.2567255-1-demonsingur@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SPI interface is activated before the CPOL setting is applied. In
that moment, the clock idles high and CS goes low. After a short delay,
CPOL and other settings are applied, which may cause the clock to change
state and idle low. This transition is not part of a clock cycle, and it
can confuse the receiving device.
To prevent this unexpected transition, activate the interface while CPOL
and the other settings are being applied.
Signed-off-by: Alessandro Grassi <alessandro.grassi@mailbox.org>
Link: https://patch.msgid.link/20250502095520.13825-1-alessandro.grassi@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When using HDMI PLL frequency division coefficient at 50.25MHz
that is calculated by rk_hdptx_phy_clk_pll_calc(), it fails to
get PHY LANE lock. Although the calculated values are within the
allowable range of PHY PLL configuration.
In order to fix the PHY LANE lock error and provide the expected
50.25MHz output, manually compute the required PHY PLL frequency
division coefficient and add it to ropll_tmds_cfg configuration
table.
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250427095124.3354439-1-algea.cao@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
JH7110 USB 2.0 host fails to detect USB 2.0 devices occasionally. With a
long time of debugging and testing, we found that setting Rx clock gating
control signal to normal power consumption mode can solve this problem.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20250422101244.51686-1-hal.feng@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A change to QEMU resulted in all nvme controllers (single and
multi-controller subsystems) to have its CMIC.MCTRS bit set which
indicates the subsystem supports multiple controllers and it is possible
a namespace can be shared between those multiple controllers in a
multipath configuration.
When a namespace of a CMIC.MCTRS enabled subsystem is allocated, a
multipath node is created. The queue limits for this node are inherited
from the namespace being allocated. When inheriting queue limits, the
features being inherited need to be specified. The atomic write feature
(BLK_FEAT_ATOMIC_WRITES) was not specified so the atomic queue limits
were not inherited by the multipath disk node which resulted in the sysfs
atomic write attributes being zeroed. The fix is to include
BLK_FEAT_ATOMIC_WRITES in the list of features to be inherited.
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In one of the error paths in qlcnic_sriov_channel_cfg_cmd(), the memory
allocated in qlcnic_sriov_alloc_bc_mbx_args() for mailbox arguments is
not freed. Fix that by jumping to the error path that frees them, by
calling qlcnic_free_mbx_args(). This was found using static analysis.
Fixes: f197a7aa6288 ("qlcnic: VF-PF communication channel implementation")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250512044829.36400-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The first paragraph makes no grammatical sense. I suppose a portion of
the intended sentece is missing: "[The challenge with ] stacked PHCs
(...) is that they uncover bugs".
Rephrase, and at the same time simplify the structure of the sentence a
little bit, it is not easy to follow.
Fixes: 94d9f78f4d64 ("docs: networking: timestamping: add section for stacked PHC devices")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20250512131751.320283-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MACsec offload is not supported in switchdev mode for uplink
representors. When switching to the uplink representor profile, the
MACsec offload feature must be cleared from the netdevice's features.
If left enabled, attempts to add offloads result in a null pointer
dereference, as the uplink representor does not support MACsec offload
even though the feature bit remains set.
Clear NETIF_F_HW_MACSEC in mlx5e_fix_uplink_rep_features().
Kernel log:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 29 UID: 0 PID: 4714 Comm: ip Not tainted 6.14.0-rc4_for_upstream_debug_2025_03_02_17_35 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__mutex_lock+0x128/0x1dd0
Code: d0 7c 08 84 d2 0f 85 ad 15 00 00 8b 35 91 5c fe 03 85 f6 75 29 49 8d 7e 60 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a6 15 00 00 4d 3b 76 60 0f 85 fd 0b 00 00 65 ff
RSP: 0018:ffff888147a4f160 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 000000000000000f RSI: 0000000000000000 RDI: 0000000000000078
RBP: ffff888147a4f2e0 R08: ffffffffa05d2c19 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: 0000000000000018 R15: ffff888152de0000
FS: 00007f855e27d800(0000) GS:ffff88881ee80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004e5768 CR3: 000000013ae7c005 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
Call Trace:
<TASK>
? die_addr+0x3d/0xa0
? exc_general_protection+0x144/0x220
? asm_exc_general_protection+0x22/0x30
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? __mutex_lock+0x128/0x1dd0
? lockdep_set_lock_cmp_fn+0x190/0x190
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? mutex_lock_io_nested+0x1ae0/0x1ae0
? lock_acquire+0x1c2/0x530
? macsec_upd_offload+0x145/0x380
? lockdep_hardirqs_on_prepare+0x400/0x400
? kasan_save_stack+0x30/0x40
? kasan_save_stack+0x20/0x40
? kasan_save_track+0x10/0x30
? __kasan_kmalloc+0x77/0x90
? __kmalloc_noprof+0x249/0x6b0
? genl_family_rcv_msg_attrs_parse.constprop.0+0xb5/0x240
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? mlx5e_macsec_add_rxsa+0x11a0/0x11a0 [mlx5_core]
macsec_update_offload+0x26c/0x820
? macsec_set_mac_address+0x4b0/0x4b0
? lockdep_hardirqs_on_prepare+0x284/0x400
? _raw_spin_unlock_irqrestore+0x47/0x50
macsec_upd_offload+0x2c8/0x380
? macsec_update_offload+0x820/0x820
? __nla_parse+0x22/0x30
? genl_family_rcv_msg_attrs_parse.constprop.0+0x15e/0x240
genl_family_rcv_msg_doit+0x1cc/0x2a0
? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
? cap_capable+0xd4/0x330
genl_rcv_msg+0x3ea/0x670
? genl_family_rcv_msg_dumpit+0x2a0/0x2a0
? lockdep_set_lock_cmp_fn+0x190/0x190
? macsec_update_offload+0x820/0x820
netlink_rcv_skb+0x12b/0x390
? genl_family_rcv_msg_dumpit+0x2a0/0x2a0
? netlink_ack+0xd80/0xd80
? rwsem_down_read_slowpath+0xf90/0xf90
? netlink_deliver_tap+0xcd/0xac0
? netlink_deliver_tap+0x155/0xac0
? _copy_from_iter+0x1bb/0x12c0
genl_rcv+0x24/0x40
netlink_unicast+0x440/0x700
? netlink_attachskb+0x760/0x760
? lock_acquire+0x1c2/0x530
? __might_fault+0xbb/0x170
netlink_sendmsg+0x749/0xc10
? netlink_unicast+0x700/0x700
? __might_fault+0xbb/0x170
? netlink_unicast+0x700/0x700
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x53f/0x760
? import_iovec+0x7/0x10
? kernel_sendmsg+0x30/0x30
? __copy_msghdr+0x3c0/0x3c0
? filter_irq_stacks+0x90/0x90
? stack_depot_save_flags+0x28/0xa30
___sys_sendmsg+0xeb/0x170
? kasan_save_stack+0x30/0x40
? copy_msghdr_from_user+0x110/0x110
? do_syscall_64+0x6d/0x140
? lock_acquire+0x1c2/0x530
? __virt_addr_valid+0x116/0x3b0
? __virt_addr_valid+0x1da/0x3b0
? lock_downgrade+0x680/0x680
? __delete_object+0x21/0x50
__sys_sendmsg+0xf7/0x180
? __sys_sendmsg_sock+0x20/0x20
? kmem_cache_free+0x14c/0x4e0
? __x64_sys_close+0x78/0xd0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f855e113367
Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RSP: 002b:00007ffd15e90c88 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f855e113367
RDX: 0000000000000000 RSI: 00007ffd15e90cf0 RDI: 0000000000000004
RBP: 00007ffd15e90dbc R08: 0000000000000028 R09: 000000000045d100
R10: 00007f855e011dd8 R11: 0000000000000246 R12: 0000000000000019
R13: 0000000067c6b785 R14: 00000000004a1e80 R15: 0000000000000000
</TASK>
Modules linked in: 8021q garp mrp sch_ingress openvswitch nsh mlx5_ib mlx5_fwctl mlx5_dpll mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: mlx5_core]
---[ end trace 0000000000000000 ]---
Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1746958552-561295-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These tests:
"SOCK_STREAM ioctl(SIOCOUTQ) 0 unsent bytes"
"SOCK_SEQPACKET ioctl(SIOCOUTQ) 0 unsent bytes"
output: "Unexpected 'SIOCOUTQ' value, expected 0, got 64 (CLIENT)".
They test that the SIOCOUTQ ioctl reports 0 unsent bytes after the data
have been received by the other side. However, sometimes there is a delay
in updating this "unsent bytes" counter, and the test fails even though
the counter properly goes to 0 several milliseconds later.
The delay occurs in the kernel because the used buffer notification
callback virtio_vsock_tx_done(), called upon receipt of the data by the
other side, doesn't update the counter itself. It delegates that to
a kernel thread (via vsock->tx_work). Sometimes that thread is delayed
more than the test expects.
Change the test to poll SIOCOUTQ until it returns 0 or a timeout occurs.
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 18ee44ce97c1 ("test/vsock: add ioctl unsent bytes test")
Link: https://patch.msgid.link/20250507151456.2577061-1-kshk@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit ce6cb8113c84 ("tools: ynl-gen: individually free previous
values on double set"), specifying the "multi-attr" property raises an
error unless the "nested-attributes" property is specified as well:
File "tools/net/ynl/./pyynl/ynl_gen_c.py", line 1147, in _load_nested_sets
child = self.pure_nested_structs.get(nested)
^^^^^^
UnboundLocalError: cannot access local variable 'nested' where it is not associated with a value
This appears to be a bug since there are existing specs which omit
"nested-attributes" on "multi-attr" attributes. Also, according to
Documentation/userspace-api/netlink/specs.rst, multi-attr "is the
recommended way of implementing arrays (no extra nesting)", suggesting
that nesting should even be avoided in favor of multi-attr.
Fix the indentation of the if-block introduced by the commit to avoid
the error.
Fixes: ce6cb8113c84 ("tools: ynl-gen: individually free previous values on double set")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/d6b58684b7e5bfb628f7313e6893d0097904e1d1.1746940107.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix several build errors when CONFIG_MODULES=n, including the following:
../arch/x86/kernel/alternative.c:195:25: error: incomplete definition of type 'struct module'
195 | for (int i = 0; i < mod->its_num_pages; i++) {
Fixes: 872df34d7c51 ("x86/its: Use dynamic thunks for indirect branches")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a synthetic feature flag for Zen6.
[ bp: Move the feature flag to a free slot and avoid future merge
conflicts from incoming stuff. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250513204857.3376577-1-yazen.ghannam@amd.com
|
|
The xe buffer object shrinker name is visible in the
<debugfs>/shrinker directory and most if not all other shinkers
follow a naming convention that looks like
<subsystem>-<driver>_<objects>:<unique>
Follow the same convention for xe, changing the name to
drm-xe_gem:<unique>.
Other shrinkers typically use the device node for <unique> but
since drm drivers typically don't have a single unique device-
node, instead use the unique name in the drm device.
Fixes: 00c8efc3180f ("drm/xe: Add a shrinker for xe bos")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://lore.kernel.org/r/20250508112931.3347-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 243bf99e2fe75edf8df1711c1377b6fc020b806c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- fprobe: Fix RCU warning message in list traversal
fprobe_module_callback() using hlist_for_each_entry_rcu() traverse
the fprobe list but it locks fprobe_mutex() instead of rcu lock
because it is enough. So add lockdep_is_held() to avoid warning.
- tracing: eprobe: Add missing trace_probe_log_clear for eprobe
__trace_eprobe_create() uses trace_probe_log but forgot to clear it
at exit. Add trace_probe_log_clear() calls.
- tracing: probes: Fix possible race in trace_probe_log APIs
trace_probe_log APIs are used in probe event (dynamic_events,
kprobe_events and uprobe_events) creation. Only dynamic_events uses
the dyn_event_ops_mutex mutex to serialize it. This makes kprobe and
uprobe events to lock the same mutex to serialize its creation to
avoid race in trace_probe_log APIs.
* tag 'probes-fixes-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probes: Fix a possible race in trace_probe_log APIs
tracing: add missing trace_probe_log_clear for eprobes
tracing: fprobe: Fix RCU warning message in list traversal
|
|
It's expected that we'll encounter temporary exceptions
during aux transactions. Adjust logging from drm_info to
drm_dbg_dp to prevent flooding with unnecessary log messages.
Fixes: 3637e457eb00 ("drm/amd/display: Fix wrong handling for AUX_DEFER case")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250513032026.838036-1-Wayne.Lin@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9a9c3e1fe5256da14a0a307dff0478f90c55fc8c)
Cc: stable@vger.kernel.org
|
|
Similar to commit 6a057072ddd1 ("drm/amd/display: Fix null check for
pipe_ctx->plane_state in dcn20_program_pipe") that addresses a null
pointer dereference on dcn20_update_dchubp_dpp. This is the same
function hooked for update_dchubp_dpp in dcn401, with the same issue.
Fix possible null pointer deference on dcn401_program_pipe too.
Fixes: 63ab80d9ac0a ("drm/amd/display: DML2.1 Post-Si Cleanup")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d8d47f739752227957d8efc0cb894761bfe1d879)
|
|
[Why & How]
Fix a false positive warning which occurs due to lack of correct checks
when querying plane_id in DML21. This fixes the warning when performing a
mode1 reset (cat /sys/kernel/debug/dri/1/amdgpu_gpu_recover):
[ 35.751250] WARNING: CPU: 11 PID: 326 at /tmp/amd.PHpyAl7v/amd/amdgpu/../display/dc/dml2/dml2_dc_resource_mgmt.c:91 dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu]
[ 35.751434] Modules linked in: amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) amddrm_buddy(OE) amdxcp(OE) amddrm_exec(OE) amd_sched(OE) amdkcl(OE) drm_suballoc_helper drm_ttm_helper ttm drm_display_helper cec rc_core i2c_algo_bit rfcomm qrtr cmac algif_hash algif_skcipher af_alg bnep amd_atl intel_rapl_msr intel_rapl_common snd_hda_codec_hdmi snd_hda_intel edac_mce_amd snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec kvm_amd snd_hda_core snd_hwdep snd_pcm kvm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul polyval_clmulni polyval_generic btusb ghash_clmulni_intel sha256_ssse3 btrtl sha1_ssse3 snd_seq btintel aesni_intel btbcm btmtk snd_seq_device crypto_simd sunrpc cryptd bluetooth snd_timer ccp binfmt_misc rapl snd i2c_piix4 wmi_bmof gigabyte_wmi k10temp i2c_smbus soundcore gpio_amdpt mac_hid sch_fq_codel msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 hid_generic usbhid hid crc32_pclmul igc ahci xhci_pci libahci xhci_pci_renesas video wmi
[ 35.751501] CPU: 11 UID: 0 PID: 326 Comm: kworker/u64:9 Tainted: G OE 6.11.0-21-generic #21~24.04.1-Ubuntu
[ 35.751504] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 35.751505] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F30 05/22/2024
[ 35.751506] Workqueue: amdgpu-reset-dev amdgpu_debugfs_reset_work [amdgpu]
[ 35.751638] RIP: 0010:dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu]
[ 35.751794] Code: 6d 0c 00 00 8b 84 24 88 00 00 00 41 3b 44 9c 20 0f 84 fc 07 00 00 48 83 c3 01 48 83 fb 06 75 b3 4c 8b 64 24 68 4c 8b 6c 24 40 <0f> 0b b8 06 00 00 00 49 8b 94 24 a0 49 00 00 89 c3 83 f8 07 0f 87
[ 35.751796] RSP: 0018:ffffbfa3805d7680 EFLAGS: 00010246
[ 35.751798] RAX: 0000000000010000 RBX: 0000000000000006 RCX: 0000000000000000
[ 35.751799] RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000
[ 35.751800] RBP: ffffbfa3805d78f0 R08: 0000000000000000 R09: 0000000000000000
[ 35.751801] R10: 0000000000000000 R11: 0000000000000000 R12: ffffbfa383249000
[ 35.751802] R13: ffffa0e68f280000 R14: ffffbfa383249658 R15: 0000000000000000
[ 35.751803] FS: 0000000000000000(0000) GS:ffffa0edbe580000(0000) knlGS:0000000000000000
[ 35.751804] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 35.751805] CR2: 00005d847ef96c58 CR3: 000000041de3e000 CR4: 0000000000f50ef0
[ 35.751806] PKRU: 55555554
[ 35.751807] Call Trace:
[ 35.751810] <TASK>
[ 35.751816] ? show_regs+0x6c/0x80
[ 35.751820] ? __warn+0x88/0x140
[ 35.751822] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu]
[ 35.751964] ? report_bug+0x182/0x1b0
[ 35.751969] ? handle_bug+0x6e/0xb0
[ 35.751972] ? exc_invalid_op+0x18/0x80
[ 35.751974] ? asm_exc_invalid_op+0x1b/0x20
[ 35.751978] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu]
[ 35.752117] ? math_pow+0x48/0xa0 [amdgpu]
[ 35.752256] ? srso_alias_return_thunk+0x5/0xfbef5
[ 35.752260] ? math_pow+0x48/0xa0 [amdgpu]
[ 35.752400] ? srso_alias_return_thunk+0x5/0xfbef5
[ 35.752403] ? math_pow+0x11/0xa0 [amdgpu]
[ 35.752524] ? srso_alias_return_thunk+0x5/0xfbef5
[ 35.752526] ? core_dcn4_mode_programming+0xe4d/0x20d0 [amdgpu]
[ 35.752663] ? srso_alias_return_thunk+0x5/0xfbef5
[ 35.752669] dml21_validate+0x3d4/0x980 [amdgpu]
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f8ad62c0a93e5dd94243e10f1b742232e4d6411e)
|
|
[Why & How]
When MST config is unplugged/replugged too quickly, it can potentially
result in a scenario where previous DC state has not been reset before
the HPD link detection sequence begins. In this case, driver will
disable the streams/link prior to re-enabling the link for link
training.
There is a bug in the current logic that does not account for the fact
that current_state can be released and cleared prior to swapping to a
new state (resulting in the pipe_ctx stream pointers to be cleared) in
between disabling streams.
To resolve this, cache the original streams prior to committing any
stream updates.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1561782686ccc36af844d55d31b44c938dd412dc)
|
|
[Why & How]
Instead of dropping DRR updates, defer them. This fixes issues where
monitor continues to see incorrect refresh rate after VRR was turned off
by userspace.
Fixes: 32953485c558 ("drm/amd/display: Do not update DRR while BW optimizations pending")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3546
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: John Olender <john.olender@gmail.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 53761b7ecd83e6fbb9f2206f8c980a6aa308c844)
Cc: stable@vger.kernel.org
|
|
This reverts commit 756c85e4d0dd ("drm/amd/display: Enable urgent latency adjustment on DCN35")
Reason for revert: Negative power impact.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9334c491cd8f388232b9a187bf0ddb728482bd6f)
|
|
[Why]
Now forcing aux->transfer to return 0 when incomplete AUX write is
inappropriate. It should return bytes have been transferred.
[How]
aux->transfer is asked not to change original msg except reply field of
drm_dp_aux_msg structure. Copy the msg->buffer when it's write request,
and overwrite the first byte when sink reply 1 byte indicating partially
written byte number. Then we can return the correct value without
changing the original msg.
Fixes: 3637e457eb00 ("drm/amd/display: Fix wrong handling for AUX_DEFER case")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7ac37f0dcd2e0b729fa7b5513908dc8ab802b540)
Cc: stable@vger.kernel.org
|
|
On GFX1151, the reported MALL cache size reflects only
half of its actual size; this adjustment corrects the discrepancy.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0a5c060b593ad152318f89e5564bfdfcff8a6ac0)
Cc: stable@vger.kernel.org
|
|
After process exit to unmap csa and free GPU vm, if signal is accepted
and then waiting to take vm lock is interrupted and return, it causes
memory leaking and below warning backtrace.
Change to use uninterruptible wait lock fix the issue.
WARNING: CPU: 69 PID: 167800 at amd/amdgpu/amdgpu_kms.c:1525
amdgpu_driver_postclose_kms+0x294/0x2a0 [amdgpu]
Call Trace:
<TASK>
drm_file_free.part.0+0x1da/0x230 [drm]
drm_close_helper.isra.0+0x65/0x70 [drm]
drm_release+0x6a/0x120 [drm]
amdgpu_drm_release+0x51/0x60 [amdgpu]
__fput+0x9f/0x280
____fput+0xe/0x20
task_work_run+0x67/0xa0
do_exit+0x217/0x3c0
do_group_exit+0x3b/0xb0
get_signal+0x14a/0x8d0
arch_do_signal_or_restart+0xde/0x100
exit_to_user_mode_loop+0xc1/0x1a0
exit_to_user_mode_prepare+0xf4/0x100
syscall_exit_to_user_mode+0x17/0x40
do_syscall_64+0x69/0xc0
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7dbbfb3c171a6f63b01165958629c9c26abf38ab)
Cc: stable@vger.kernel.org
|
|
When shared pages are being converted to private during kdump, additional
checks are performed. They include handling the case of a GHCB page being
contained within a huge page.
Currently, this check incorrectly skips a page just below the GHCB page from
being transitioned back to private during kdump preparation.
This skipped page causes a 0x404 #VC exception when it is accessed later while
dumping guest memory for vmcore generation.
Correct the range to be checked for GHCB contained in a huge page. Also,
ensure that the skipped huge page containing the GHCB page is transitioned
back to private by applying the correct address mask later when changing GHCBs
to private at end of kdump preparation.
[ bp: Massage commit message. ]
Fixes: 3074152e56c9 ("x86/sev: Convert shared memory back to private on kexec")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250506183529.289549-1-Ashish.Kalra@amd.com
|
|
When kdump is running makedumpfile to generate vmcore and dump SNP guest
memory it touches the VMSA page of the vCPU executing kdump.
It then results in unrecoverable #NPF/RMP faults as the VMSA page is
marked busy/in-use when the vCPU is running and subsequently a causes
guest softlockup/hang.
Additionally, other APs may be halted in guest mode and their VMSA pages
are marked busy and touching these VMSA pages during guest memory dump
will also cause #NPF.
Issue AP_DESTROY GHCB calls on other APs to ensure they are kicked out
of guest mode and then clear the VMSA bit on their VMSA pages.
If the vCPU running kdump is an AP, mark it's VMSA page as offline to
ensure that makedumpfile excludes that page while dumping guest memory.
Fixes: 3074152e56c9 ("x86/sev: Convert shared memory back to private on kexec")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250428214151.155464-1-Ashish.Kalra@amd.com
|
|
The current HID bpf implementation assumes no output report/request will
go through it after hid_bpf_destroy_device() has been called. This leads
to a bug that unplugging certain types of HID devices causes a cleaned-
up SRCU to be accessed. The bug was previously a hidden failure until a
recent x86 percpu change [1] made it access not-present pages.
The bug will be triggered if the conditions below are met:
A) a device under the driver has some LEDs on
B) hid_ll_driver->request() is uninplemented (e.g., logitech-djreceiver)
If condition A is met, hidinput_led_worker() is always scheduled *after*
hid_bpf_destroy_device().
hid_destroy_device
` hid_bpf_destroy_device
` cleanup_srcu_struct(&hdev->bpf.srcu)
` hid_remove_device
` ...
` led_classdev_unregister
` led_trigger_set(led_cdev, NULL)
` led_set_brightness(led_cdev, LED_OFF)
` ...
` input_inject_event
` input_event_dispose
` hidinput_input_event
` schedule_work(&hid->led_work) [hidinput_led_worker]
This is fine when condition B is not met, where hidinput_led_worker()
calls hid_ll_driver->request(). This is the case for most HID drivers,
which implement it or use the generic one from usbhid. The driver itself
or an underlying driver will then abort processing the request.
Otherwise, hidinput_led_worker() tries hid_hw_output_report() and leads
to the bug.
hidinput_led_worker
` hid_hw_output_report
` dispatch_hid_bpf_output_report
` srcu_read_lock(&hdev->bpf.srcu)
` srcu_read_unlock(&hdev->bpf.srcu, idx)
The bug has existed since the introduction [2] of
dispatch_hid_bpf_output_report(). However, the same bug also exists in
dispatch_hid_bpf_raw_requests(), and I've reproduced (no visible effect
because of the lack of [1], but confirmed bpf.destroyed == 1) the bug
against the commit (i.e., the Fixes:) introducing the function. This is
because hidinput_led_worker() falls back to hid_hw_raw_request() when
hid_ll_driver->output_report() is uninplemented (e.g., logitech-
djreceiver).
hidinput_led_worker
` hid_hw_output_report: -ENOSYS
` hid_hw_raw_request
` dispatch_hid_bpf_raw_requests
` srcu_read_lock(&hdev->bpf.srcu)
` srcu_read_unlock(&hdev->bpf.srcu, idx)
Fix the issue by returning early in the two mentioned functions if
hid_bpf has been marked as destroyed. Though
dispatch_hid_bpf_device_event() handles input events, and there is no
evidence that it may be called after the destruction, the same check, as
a safety net, is also added to it to maintain the consistency among all
dispatch functions.
The impact of the bug on other architectures is unclear. Even if it acts
as a hidden failure, this is still dangerous because it corrupts
whatever is on the address calculated by SRCU. Thus, CC'ing the stable
list.
[1]: commit 9d7de2aa8b41 ("x86/percpu/64: Use relative percpu offsets")
[2]: commit 9286675a2aed ("HID: bpf: add HID-BPF hooks for
hid_hw_output_report")
Closes: https://lore.kernel.org/all/20250506145548.GGaBoi9Jzp3aeJizTR@fat_crate.local/
Fixes: 8bd0488b5ea5 ("HID: bpf: add HID-BPF hooks for hid_hw_raw_requests")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Tested-by: Petr Tesarik <petr@tesarici.cz>
Link: https://patch.msgid.link/20250512152420.87441-1-i@rong.moe
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
When bridged ports and standalone ports share a VLAN, e.g. via VLAN
uppers, or untagged traffic with a vlan unaware bridge, the ASIC will
still try to forward traffic to known FDB entries on standalone ports.
But since the port VLAN masks prevent forwarding to bridged ports, this
traffic will be dropped.
This e.g. can be observed in the bridge_vlan_unaware ping tests, where
this breaks pinging with learning on.
Work around this by enabling the simplified EAP mode on switches
supporting it for standalone ports, which causes the ASIC to redirect
traffic of unknown source MAC addresses to the CPU port.
Since standalone ports do not learn, there are no known source MAC
addresses, so effectively this redirects all incoming traffic to the CPU
port.
Fixes: ff39c2d68679 ("net: dsa: b53: Add bridge support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250508091424.26870-1-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since the shared trace_probe_log variable can be accessed and
modified via probe event create operation of kprobe_events,
uprobe_events, and dynamic_events, it should be protected.
In the dynamic_events, all operations are serialized by
`dyn_event_ops_mutex`. But kprobe_events and uprobe_events
interfaces are not serialized.
To solve this issue, introduces dyn_event_create(), which runs
create() operation under the mutex, for kprobe_events and
uprobe_events. This also uses lockdep to check the mutex is
held when using trace_probe_log* APIs.
Link: https://lore.kernel.org/all/174684868120.551552.3068655787654268804.stgit@devnote2/
Reported-by: Paul Cacheux <paulcacheux@gmail.com>
Closes: https://lore.kernel.org/all/20250510074456.805a16872b591e2971a4d221@kernel.org/
Fixes: ab105a4fb894 ("tracing: Use tracing error_log with probe events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
If the caller wrote more characters, count is truncated to the max
available space in "simple_write_to_buffer". Check that the input
size does not exceed the buffer size. Write a zero termination
afterwards.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505091754.285hHbr2-lkp@intel.com/
Signed-off-by: Markus Burri <markus.burri@mt.com>
Link: https://lore.kernel.org/r/20250509150459.115489-1-markus.burri@mt.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
If an input changes state during wake-up and is used as an interrupt
source, the IRQ handler reads the volatile input register to clear the
interrupt mask and deassert the IRQ line. However, the IRQ handler is
triggered before access to the register is granted, causing the read
operation to fail.
As a result, the IRQ handler enters a loop, repeatedly printing the
"failed reading register" message, until `pca953x_resume()` is eventually
called, which restores the driver context and enables access to
registers.
Fix by disabling the IRQ line before entering suspend mode, and
re-enabling it after the driver context is restored in `pca953x_resume()`.
An IRQ can be disabled with disable_irq() and still wake the system as
long as the IRQ has wake enabled, so the wake-up functionality is
preserved.
Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Cc: stable@vger.kernel.org
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250512095441.31645-1-francesco@dolcini.it
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
If CONFIG_SH_DMA_API=n:
WARNING: unmet direct dependencies detected for G2_DMA
Depends on [n]: SH_DREAMCAST [=y] && SH_DMA_API [=n]
Selected by [y]:
- SND_AICA [=y] && SOUND [=y] && SND [=y] && SND_SUPERH [=y] && SH_DREAMCAST [=y]
SND_AICA selects G2_DMA. As the latter depends on SH_DMA_API, the
former should depend on SH_DMA_API, too.
Fixes: f477a538c14d07f8 ("sh: dma: fix kconfig dependency for G2_DMA")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505131320.PzgTtl9H-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/b90625f8a9078d0d304bafe862cbe3a3fab40082.1747121335.git.geert+renesas@glider.be
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A user reported on the Arch Linux Forums that their device is emitting
the following message in the kernel journal, which is fixed by adding
the quirk as submitted in this patch:
> kernel: usb 1-2: current rate 8436480 is different from the runtime rate 48000
There also is an entry for this product line added long time ago.
Their specific device has the following ID:
$ lsusb | grep Audio
Bus 001 Device 002: ID 1101:0003 EasyPass Industrial Co., Ltd Audioengine D1
Link: https://bbs.archlinux.org/viewtopic.php?id=305494
Fixes: 93f9d1a4ac593 ("ALSA: usb-audio: Apply sample rate quirk for Audioengine D1")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Heusel <christian@heusel.eu>
Link: https://patch.msgid.link/20250512-audioengine-quirk-addition-v1-1-4c370af6eff7@heusel.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Oleksij Rempel says:
====================
address EEE regressions on KSZ switches since v6.9 (v6.14+)
This patch series addresses a regression in Energy Efficient Ethernet
(EEE) handling for KSZ switches with integrated PHYs, introduced in
kernel v6.9 by commit fe0d4fd9285e ("net: phy: Keep track of EEE
configuration").
The first patch updates the DSA driver to allow phylink to properly
manage PHY EEE configuration. Since integrated PHYs handle LPI
internally and ports without integrated PHYs do not document MAC-level
LPI support, dummy MAC LPI callbacks are provided.
The second patch removes outdated EEE workarounds from the micrel PHY
driver, as they are no longer needed with correct phylink handling.
This series addresses the regression for mainline and kernels starting
from v6.14. It is not easily possible to fully fix older kernels due
to missing infrastructure changes.
Tested on KSZ9893 hardware.
====================
Link: https://patch.msgid.link/20250504081434.424489-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The KSZ9477 PHY driver contained workarounds for broken EEE capability
advertisements by manually masking supported EEE modes and forcibly
disabling EEE if MICREL_NO_EEE was set.
With proper MAC-side EEE handling implemented via phylink, these quirks
are no longer necessary. Remove MICREL_NO_EEE handling and the use of
ksz9477_get_features().
This simplifies the PHY driver and avoids duplicated EEE management logic.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org # v6.14+
Link: https://patch.msgid.link/20250504081434.424489-3-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Phylink expects MAC drivers to provide LPI callbacks to properly manage
Energy Efficient Ethernet (EEE) configuration. On KSZ switches with
integrated PHYs, LPI is internally handled by hardware, while ports
without integrated PHYs have no documented MAC-level LPI support.
Provide dummy mac_disable_tx_lpi() and mac_enable_tx_lpi() callbacks to
satisfy phylink requirements. Also, set default EEE capabilities during
phylink initialization where applicable.
Since phylink can now gracefully handle optional EEE configuration,
remove the need for the MICREL_NO_EEE PHY flag.
This change addresses issues caused by incomplete EEE refactoring
introduced in commit fe0d4fd9285e ("net: phy: Keep track of EEE
configuration"). It is not easily possible to fix all older kernels, but
this patch ensures proper behavior on latest kernels and can be
considered for backporting to stable kernels starting from v6.14.
Fixes: fe0d4fd9285e ("net: phy: Keep track of EEE configuration")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org # v6.14+
Link: https://patch.msgid.link/20250504081434.424489-2-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The flag NVMET_PCI_EPF_Q_IS_SQ is set but never used. Remove it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Improve the debug message of nvmet_pci_epf_create_cq() to indicate if a
completion queue IRQ is disabled.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
There is no point in taking the controller irq_lock and calling
nvmet_pci_epf_should_raise_irq() for a completion queue which does not
have IRQ enabled (NVMET_PCI_EPF_Q_IRQ_ENABLED flag is not set).
Move the test for the NVMET_PCI_EPF_Q_IRQ_ENABLED flag out of
nvmet_pci_epf_should_raise_irq() to the top of nvmet_pci_epf_raise_irq()
to return early when no IRQ should be raised.
Also, use dev_err_ratelimited() to avoid a message storm under load when
raising IRQs is failing.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Some endpoint PCIe controllers do not support raising legacy INTX
interrupts. This support is indicated by the intx_capable field of
struct pci_epc_features. Modify nvmet_pci_epf_raise_irq() to not
automatically fallback to trying raising an INTX interrupt after an MSI
or MSI-X error if the controller does not support INTX.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The function nvmet_pci_epf_delete_cq() unconditionally calls
nvmet_pci_epf_remove_irq_vector() even for completion queues that do not
have interrupts enabled. Furthermore, for completion queues that do
have IRQ enabled, deleting and re-creating the completion queue leaves
the flag NVMET_PCI_EPF_Q_IRQ_ENABLED set, even if the completion queue
is being re-created with IRQ disabled.
Fix these issues by calling nvmet_pci_epf_remove_irq_vector() only if
NVMET_PCI_EPF_Q_IRQ_ENABLED is set and make sure to always clear that
flag.
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We need to lock this queue for that condition because the timeout work
executes per-namespace and can poll the poll CQ.
Reported-by: Hannes Reinecke <hare@kernel.org>
Closes: https://lore.kernel.org/all/20240902130728.1999-1-hare@kernel.org/
Fixes: a0fa9647a54e ("NVMe: add blk polling support")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The only reason nvme_pci_npages_prp() could be used as a compile-time
known result in BUILD_BUG_ON() is because the compiler was always choosing
to inline the function. Under special circumstances (sanitizer coverage
functions disabled for __init functions on ARCH=um), the compiler decided
to stop inlining it:
drivers/nvme/host/pci.c: In function 'nvme_init':
include/linux/compiler_types.h:557:45: error: call to '__compiletime_assert_678' declared with attribute error: BUILD_BUG_ON failed: nvme_pci_npages_prp() > NVME_MAX_NR_ALLOCATIONS
557 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
include/linux/compiler_types.h:538:25: note: in definition of macro '__compiletime_assert'
538 | prefix ## suffix(); \
| ^~~~~~
include/linux/compiler_types.h:557:9: note: in expansion of macro '_compiletime_assert'
557 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:50:9: note: in expansion of macro 'BUILD_BUG_ON_MSG'
50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
| ^~~~~~~~~~~~~~~~
drivers/nvme/host/pci.c:3804:9: note: in expansion of macro 'BUILD_BUG_ON'
3804 | BUILD_BUG_ON(nvme_pci_npages_prp() > NVME_MAX_NR_ALLOCATIONS);
| ^~~~~~~~~~~~
Force it to be __always_inline to make sure it is always available for
use with BUILD_BUG_ON().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505061846.12FMyRjj-lkp@intel.com/
Fixes: c372cdd1efdf ("nvme-pci: iod npages fits in s8")
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The REPORT ZONES buffer size is currently limited by the HBA's maximum
segment count to ensure the buffer can be mapped. However, the block
layer further limits the number of iovec entries to 1024 when allocating
a bio.
To avoid allocation of buffers too large to be mapped, further restrict
the maximum buffer size to BIO_MAX_INLINE_VECS.
Replace the UIO_MAXIOV symbolic name with the more contextually
appropriate BIO_MAX_INLINE_VECS.
Fixes: b091ac616846 ("sd_zbc: Fix report zones buffer allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Siwinski <ssiwinski@atto.com>
Link: https://lore.kernel.org/r/20250508200122.243129-1-ssiwinski@atto.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
It has been reported that when under a bridge with stp_state=1, the logs
get spammed with this message:
[ 251.734607] fsl_dpaa2_eth dpni.5 eth0: Couldn't decode source port
Further debugging shows the following info associated with packets:
source_port=-1, switch_id=-1, vid=-1, vbid=1
In other words, they are data plane packets which are supposed to be
decoded by dsa_tag_8021q_find_port_by_vbid(), but the latter (correctly)
refuses to do so, because no switch port is currently in
BR_STATE_LEARNING or BR_STATE_FORWARDING - so the packet is effectively
unexpected.
The error goes away after the port progresses to BR_STATE_LEARNING in 15
seconds (the default forward_time of the bridge), because then,
dsa_tag_8021q_find_port_by_vbid() can correctly associate the data plane
packets with a plausible bridge port in a plausible STP state.
Re-reading IEEE 802.1D-1990, I see the following:
"4.4.2 Learning: (...) The Forwarding Process shall discard received
frames."
IEEE 802.1D-2004 further clarifies:
"DISABLED, BLOCKING, LISTENING, and BROKEN all correspond to the
DISCARDING port state. While those dot1dStpPortStates serve to
distinguish reasons for discarding frames, the operation of the
Forwarding and Learning processes is the same for all of them. (...)
LISTENING represents a port that the spanning tree algorithm has
selected to be part of the active topology (computing a Root Port or
Designated Port role) but is temporarily discarding frames to guard
against loops or incorrect learning."
Well, this is not what the driver does - instead it sets
mac[port].ingress = true.
To get rid of the log spam, prevent unexpected data plane packets to
be received by software by discarding them on ingress in the LISTENING
state.
In terms of blame attribution: the prints only date back to commit
d7f9787a763f ("net: dsa: tag_8021q: add support for imprecise RX based
on the VBID"). However, the settings would permit a LISTENING port to
forward to a FORWARDING port, and the standard suggests that's not OK.
Fixes: 640f763f98c2 ("net: dsa: sja1105: Add support for Spanning Tree Protocol")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250509113816.2221992-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__netdev_update_features() expects the netdevice to be ops-locked, but
it gets called recursively on the lower level netdevices to sync their
features, and nothing locks those.
This commit fixes that, with the assumption that it shouldn't be possible
for both higher-level and lover-level netdevices to require the instance
lock, because that would lead to lock dependency warnings.
Without this, playing with higher level (e.g. vxlan) netdevices on top
of netdevices with instance locking enabled can run into issues:
WARNING: CPU: 59 PID: 206496 at ./include/net/netdev_lock.h:17 netif_napi_add_weight_locked+0x753/0xa60
[...]
Call Trace:
<TASK>
mlx5e_open_channel+0xc09/0x3740 [mlx5_core]
mlx5e_open_channels+0x1f0/0x770 [mlx5_core]
mlx5e_safe_switch_params+0x1b5/0x2e0 [mlx5_core]
set_feature_lro+0x1c2/0x330 [mlx5_core]
mlx5e_handle_feature+0xc8/0x140 [mlx5_core]
mlx5e_set_features+0x233/0x2e0 [mlx5_core]
__netdev_update_features+0x5be/0x1670
__netdev_update_features+0x71f/0x1670
dev_ethtool+0x21c5/0x4aa0
dev_ioctl+0x438/0xae0
sock_ioctl+0x2ba/0x690
__x64_sys_ioctl+0xa78/0x1700
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Fixes: 7e4d784f5810 ("net: hold netdev instance lock during rtnetlink operations")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250509072850.2002821-1-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a situation where after THALT is set high, TGO stays high as
well. Because jiffies are never updated, as we are in a context with
interrupts disabled, we never exit that loop and have a deadlock.
That deadlock was noticed on a sama5d4 device that stayed locked for days.
Use retries instead of jiffies so that the timeout really works and we do
not have a deadlock anymore.
Fixes: e86cd53afc590 ("net/macb: better manage tx errors")
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250509121935.16282-1-othacehe@gnu.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"A little bit invasive for rc6 but they're important fixes, pass tests
fine and won't break anything outside sched_ext:
- scx_bpf_cpuperf_set() calls internal functions that require the rq
to be locked. It assumed that the BPF caller has rq locked but
that's not always true. Fix it by tracking whether rq is currently
held by the CPU and grabbing it if necessary
- bpf_iter_scx_dsq_new() was leaving the DSQ iterator in an
uninitialized state after an error. However, next() and destroy()
can be called on an iterator which failed initialization and thus
they always need to be initialized even after an init error. Fix by
always initializing the iterator
- Remove duplicate BTF_ID_FLAGS() entries"
* tag 'sched_ext-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: bpf_iter_scx_dsq_new() should always initialize iterator
sched_ext: Fix rq lock state in hotplug ops
sched_ext: Remove duplicate BTF_ID_FLAGS definitions
sched_ext: Fix missing rq lock in scx_bpf_cpuperf_set()
sched_ext: Track currently locked rq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"One low-risk patch to fix a cpuset bug where it over-eagerly tries to
modify CPU affinity of kernel threads"
* tag 'cgroup-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Extend kthread_is_per_cpu() check to all PF_NO_SETAFFINITY tasks
|
|
The Btrfs documentation states that if the commit value is greater than
300 a warning should be issued. The warning was accidentally lost in the
new mount API update.
Fixes: 6941823cc878 ("btrfs: remove old mount API code")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If btrfs_reserve_extent() fails while submitting an async_extent for a
compressed write, then we fail to call free_async_extent_pages() on the
async_extent and leak its folios. A likely cause for such a failure
would be btrfs_reserve_extent() failing to find a large enough
contiguous free extent for the compressed extent.
I was able to reproduce this by:
1. mount with compress-force=zstd:3
2. fallocating most of a filesystem to a big file
3. fragmenting the remaining free space
4. trying to copy in a file which zstd would generate large compressed
extents for (vmlinux worked well for this)
Step 4. hits the memory leak and can be repeated ad nauseam to
eventually exhaust the system memory.
Fix this by detecting the case where we fallback to uncompressed
submission for a compressed async_extent and ensuring that we call
free_async_extent_pages().
Fixes: 131a821a243f ("btrfs: fallback if compressed IO fails for ENOSPC")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Co-developed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If the discard worker is running and there's currently only one block
group, that block group is a data block group, it's in the unused block
groups discard list and is being used (it got an extent allocated from it
after becoming unused), the worker can end up in an infinite loop if a
transaction abort happens or the async discard is disabled (during remount
or unmount for example).
This happens like this:
1) Task A, the discard worker, is at peek_discard_list() and
find_next_block_group() returns block group X;
2) Block group X is in the unused block groups discard list (its discard
index is BTRFS_DISCARD_INDEX_UNUSED) since at some point in the past
it become an unused block group and was added to that list, but then
later it got an extent allocated from it, so its ->used counter is not
zero anymore;
3) The current transaction is aborted by task B and we end up at
__btrfs_handle_fs_error() in the transaction abort path, where we call
btrfs_discard_stop(), which clears BTRFS_FS_DISCARD_RUNNING from
fs_info, and then at __btrfs_handle_fs_error() we set the fs to RO mode
(setting SB_RDONLY in the super block's s_flags field);
4) Task A calls __add_to_discard_list() with the goal of moving the block
group from the unused block groups discard list into another discard
list, but at __add_to_discard_list() we end up doing nothing because
btrfs_run_discard_work() returns false, since the super block has
SB_RDONLY set in its flags and BTRFS_FS_DISCARD_RUNNING is not set
anymore in fs_info->flags. So block group X remains in the unused block
groups discard list;
5) Task A then does a goto into the 'again' label, calls
find_next_block_group() again we gets block group X again. Then it
repeats the previous steps over and over since there are not other
block groups in the discard lists and block group X is never moved
out of the unused block groups discard list since
btrfs_run_discard_work() keeps returning false and therefore
__add_to_discard_list() doesn't move block group X out of that discard
list.
When this happens we can get a soft lockup report like this:
[71.957] watchdog: BUG: soft lockup - CPU#0 stuck for 27s! [kworker/u4:3:97]
[71.957] Modules linked in: xfs af_packet rfkill (...)
[71.957] CPU: 0 UID: 0 PID: 97 Comm: kworker/u4:3 Tainted: G W 6.14.2-1-default #1 openSUSE Tumbleweed 968795ef2b1407352128b466fe887416c33af6fa
[71.957] Tainted: [W]=WARN
[71.957] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[71.957] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs]
[71.957] RIP: 0010:btrfs_discard_workfn+0xc4/0x400 [btrfs]
[71.957] Code: c1 01 48 83 (...)
[71.957] RSP: 0018:ffffafaec03efe08 EFLAGS: 00000246
[71.957] RAX: ffff897045500000 RBX: ffff8970413ed8d0 RCX: 0000000000000000
[71.957] RDX: 0000000000000001 RSI: ffff8970413ed8d0 RDI: 0000000a8f1272ad
[71.957] RBP: 0000000a9d61c60e R08: ffff897045500140 R09: 8080808080808080
[71.957] R10: ffff897040276800 R11: fefefefefefefeff R12: ffff8970413ed860
[71.957] R13: ffff897045500000 R14: ffff8970413ed868 R15: 0000000000000000
[71.957] FS: 0000000000000000(0000) GS:ffff89707bc00000(0000) knlGS:0000000000000000
[71.957] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[71.957] CR2: 00005605bcc8d2f0 CR3: 000000010376a001 CR4: 0000000000770ef0
[71.957] PKRU: 55555554
[71.957] Call Trace:
[71.957] <TASK>
[71.957] process_one_work+0x17e/0x330
[71.957] worker_thread+0x2ce/0x3f0
[71.957] ? __pfx_worker_thread+0x10/0x10
[71.957] kthread+0xef/0x220
[71.957] ? __pfx_kthread+0x10/0x10
[71.957] ret_from_fork+0x34/0x50
[71.957] ? __pfx_kthread+0x10/0x10
[71.957] ret_from_fork_asm+0x1a/0x30
[71.957] </TASK>
[71.957] Kernel panic - not syncing: softlockup: hung tasks
[71.987] CPU: 0 UID: 0 PID: 97 Comm: kworker/u4:3 Tainted: G W L 6.14.2-1-default #1 openSUSE Tumbleweed 968795ef2b1407352128b466fe887416c33af6fa
[71.989] Tainted: [W]=WARN, [L]=SOFTLOCKUP
[71.989] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[71.991] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs]
[71.992] Call Trace:
[71.993] <IRQ>
[71.994] dump_stack_lvl+0x5a/0x80
[71.994] panic+0x10b/0x2da
[71.995] watchdog_timer_fn.cold+0x9a/0xa1
[71.996] ? __pfx_watchdog_timer_fn+0x10/0x10
[71.997] __hrtimer_run_queues+0x132/0x2a0
[71.997] hrtimer_interrupt+0xff/0x230
[71.998] __sysvec_apic_timer_interrupt+0x55/0x100
[71.999] sysvec_apic_timer_interrupt+0x6c/0x90
[72.000] </IRQ>
[72.000] <TASK>
[72.001] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[72.002] RIP: 0010:btrfs_discard_workfn+0xc4/0x400 [btrfs]
[72.002] Code: c1 01 48 83 (...)
[72.005] RSP: 0018:ffffafaec03efe08 EFLAGS: 00000246
[72.006] RAX: ffff897045500000 RBX: ffff8970413ed8d0 RCX: 0000000000000000
[72.006] RDX: 0000000000000001 RSI: ffff8970413ed8d0 RDI: 0000000a8f1272ad
[72.007] RBP: 0000000a9d61c60e R08: ffff897045500140 R09: 8080808080808080
[72.008] R10: ffff897040276800 R11: fefefefefefefeff R12: ffff8970413ed860
[72.009] R13: ffff897045500000 R14: ffff8970413ed868 R15: 0000000000000000
[72.010] ? btrfs_discard_workfn+0x51/0x400 [btrfs 23b01089228eb964071fb7ca156eee8cd3bf996f]
[72.011] process_one_work+0x17e/0x330
[72.012] worker_thread+0x2ce/0x3f0
[72.013] ? __pfx_worker_thread+0x10/0x10
[72.014] kthread+0xef/0x220
[72.014] ? __pfx_kthread+0x10/0x10
[72.015] ret_from_fork+0x34/0x50
[72.015] ? __pfx_kthread+0x10/0x10
[72.016] ret_from_fork_asm+0x1a/0x30
[72.017] </TASK>
[72.017] Kernel Offset: 0x15000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[72.019] Rebooting in 90 seconds..
So fix this by making sure we move a block group out of the unused block
groups discard list when calling __add_to_discard_list().
Fixes: 2bee7eb8bb81 ("btrfs: discard one region at a time in async discard")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1242012
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
- amd/pmc: Use spurious 8042 quirk with MECHREVO Wujie 14XA
- amd/pmf:
- Ensure Smart PC policies are valid
- Fix memory leak when the engine fails to start
- amd/hsmp: Make amd_hsmp and hsmp_acpi as mutually exclusive drivers
- asus-wmi: Fix wlan_ctrl_by_user detection
- thinkpad_acpi: Add support for NEC Lavie X1475JAS
* tag 'platform-drivers-x86-v6.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Fix wlan_ctrl_by_user detection
platform/x86/amd/pmc: Declare quirk_spurious_8042 for MECHREVO Wujie 14XA (GX4HRXL)
platform/x86: thinkpad_acpi: Support also NEC Lavie X1475JAS
platform/x86/amd/hsmp: Make amd_hsmp and hsmp_acpi as mutually exclusive drivers
drivers/platform/x86/amd: pmf: Check for invalid Smart PC Policies
drivers/platform/x86/amd: pmf: Check for invalid sideloaded Smart PC Policies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF fix from Jan Kara:
"Fix a bug in UDF inode eviction leading to spewing pointless
error messages"
* tag 'udf_for_v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Make sure i_lenExtents is uptodate on inode eviction
|
|
When using trace_array_printk() on a created instance, the correct
function to use to initialize it is:
trace_array_init_printk()
Not
trace_printk_init_buffer()
The former is a proper function to use, the latter is for initializing
trace_printk() and causes the NOTICE banner to be displayed.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Divya Indi <divya.indi@oracle.com>
Link: https://lore.kernel.org/20250509152657.0f6744d9@gandalf.local.home
Fixes: 89ed42495ef4a ("tracing: Sample module to demonstrate kernel access to Ftrace instances.")
Fixes: 38ce2a9e33db6 ("tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Ensure that simple_xattr_list() always includes security.* xattrs
- Fix eventpoll busy loop optimization when combined with timeouts
- Disable swapon() for devices with block sizes greater than page sizes
- Don't call errseq_set() twice during mark_buffer_write_io_error().
Just use mapping_set_error() which takes care to not deference
unconditionally
* tag 'vfs-6.15-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Remove redundant errseq_set call in mark_buffer_write_io_error.
swapfile: disable swapon for bs > ps devices
fs/eventpoll: fix endless busy loop after timeout has expired
fs/xattr.c: fix simple_xattr_list to always include security.* xattrs
|
|
This was forgotten when the analyzer went upstream.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250424212234.5313-2-wsa+renesas@sang-engineering.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
For older/32-bit systems with highmem, don't assume that the pages in
a mapped region are always going to be mapped. If io_region_init_ptr()
finds that the pages are coalescable, also check if the first page is
a HighMem page or not. If it is, fall through to the usual vmap()
mapping rather than attempt to get the unmapped page address.
Cc: stable@vger.kernel.org
Fixes: c4d0ac1c1567 ("io_uring/memmap: optimise single folio regions")
Link: https://lore.kernel.org/all/681fe2fb.050a0220.f2294.001a.GAE@google.com/
Reported-by: syzbot+5b8c4abafcb1d791ccfc@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/681fed0a.050a0220.f2294.001c.GAE@google.com/
Reported-by: syzbot+6456a99dfdc2e78c4feb@syzkaller.appspotmail.com
Tested-by: syzbot+6456a99dfdc2e78c4feb@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Modify the check for whether the timer is initialized during IO transfer
when passthrough is used with hybrid polling, to ensure that it's always
setup correctly.
Cc: stable@vger.kernel.org
Fixes: 01ee194d1aba ("io_uring: add support for hybrid IOPOLL")
Signed-off-by: hexue <xue01.he@samsung.com>
Link: https://lore.kernel.org/r/20250512052025.293031-1-xue01.he@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Many nvme metadata formats can not strip or generate the metadata on the
controller side. For these formats, a host provided integrity buffer is
mandatory even if it isn't checked.
The block integrity read_verify and write_generate attributes prevent
allocating the metadata buffer, but we need it when the format requires
it, otherwise reads and writes will be rejected by the driver with IO
errors.
Assume the integrity buffer can be offloaded to the controller if the
metadata size is the same as the protection information size. Otherwise
provide an unchecked host buffer when the read verify or write
generation attributes are disabled. This fixes the following nvme
warning:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 371 at drivers/nvme/host/core.c:1036 nvme_setup_rw+0x122/0x210
...
RIP: 0010:nvme_setup_rw+0x122/0x210
...
Call Trace:
<TASK>
nvme_setup_cmd+0x1b4/0x280
nvme_queue_rqs+0xc4/0x1f0 [nvme]
blk_mq_dispatch_queue_requests+0x24a/0x430
blk_mq_flush_plug_list+0x50/0x140
__blk_flush_plug+0xc1/0x100
__submit_bio+0x1c1/0x360
? submit_bio_noacct_nocheck+0x2d6/0x3c0
submit_bio_noacct_nocheck+0x2d6/0x3c0
? submit_bio_noacct+0x47/0x4c0
submit_bio_wait+0x48/0xa0
__blkdev_direct_IO_simple+0xee/0x210
? current_time+0x1d/0x100
? current_time+0x1d/0x100
? __bio_clone+0xb0/0xb0
blkdev_read_iter+0xbb/0x140
vfs_read+0x239/0x310
ksys_read+0x58/0xc0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250509153802.3482493-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the effective written size instead of original size as index for zero
termination. If the input from user-space is to larger and the input is
truncated, the original size is out-of-bound.
Since there is an upfront size check here, the change is for consistency.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250508130612.82270-3-markus.burri@mt.com
|
|
Fix a typo in an email address.
Closes: https://lore.kernel.org/all/20240925-rational-succinct-vulture-cca9fb@lemur/T/
Reported-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Alexey Makhalov <alexey.makhalov@broadcom.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250318004031.2703923-1-alexey.makhalov@broadcom.com
|
|
Use the BIT() and BIT_ULL() macros in the new audit code instead of
explicit shifts to improve readability. Use bitmask instead of modulo
operation to simplify code.
Add test_range1_rand15() and test_range2_rand15() KUnit tests to improve
get_id_range() coverage.
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20250512093732.1408485-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Since commit 559358282e5b ("drm/fb-helper: Don't use the preferred depth
for the BPP default"), RGB565 displays such as the CFAF240320X no longer
render correctly: colors are distorted and the content is shown twice
horizontally.
This regression is due to the fbdev emulation layer defaulting to 32 bits
per pixel, whereas the display expects 16 bpp (RGB565). As a result, the
framebuffer data is incorrectly interpreted by the panel.
Fix the issue by calling drm_client_setup_with_fourcc() with a format
explicitly selected based on the display's bits-per-pixel value. For 16
bpp, use DRM_FORMAT_RGB565; for other values, fall back to the previous
behavior. This ensures that the allocated framebuffer format matches the
hardware expectations, avoiding color and layout corruption.
Tested on a CFAF240320X display with an RGB565 configuration, confirming
correct colors and layout after applying this patch.
Cc: stable@vger.kernel.org
Fixes: 559358282e5b ("drm/fb-helper: Don't use the preferred depth for the BPP default")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250417103458.2496790-1-festevam@gmail.com
|
|
The filenames in the comments do not match the actual generated files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
