diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2025-06-05 08:20:21 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2025-06-05 08:20:21 -0700 |
| commit | d12ed2b7e1fe5c9e4a372a95fb7635a7f81eff6a (patch) | |
| tree | b41fd5f505d52a5f3c11c9bd7a73989533890472 | |
| parent | a479ebb269bc0c4d286f0413b92f92808e053b79 (diff) | |
| parent | 0c22287319741b4e7c7beaedac1f14fbe01a03b9 (diff) | |
| download | linux-d12ed2b7e1fe5c9e4a372a95fb7635a7f81eff6a.tar.gz | |
Merge tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"As usual featuring couple of new driver and bunch of new device
support and some driver changes to Freescale, rockchip driver along
with couple of yaml binding conversions.
New Support:
- Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver
- Rockchip usb2 support for RK3562, RK3036 usb2 phy support
- Samsung exynos2200 eusb2 phy support and driver refactoring for
this support, exynos7870 USBDRD support
- Mediatek MT7988 xs-phy support
- Broadcom BCM74110 usb phy support
- Renesas RZ/V2H(P) usb2 phy support
Updates:
- Freescale phy rate claculation updates, i.MX95 tuning support
- Better error handling for amlogic pcie phy
- Rockchip color depth configuration and management support
- Yaml binding conversion for RK3399 Type-C and PCIe Phy"
* tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
phy: tegra: p2u: Broaden architecture dependency
phy: rockchip: inno-usb2: Add usb2 phy support for rk3562
dt-bindings: phy: rockchip,inno-usb2phy: add rk3562
phy: rockchip: inno-usb2: add phy definition for rk3036
dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible
phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock
phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings
phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate
phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)
phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number
dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC
dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family
phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller
phy: phy-snps-eusb2: add support for exynos2200
phy: phy-snps-eusb2: refactor reference clock init
phy: phy-snps-eusb2: make reset control optional
phy: phy-snps-eusb2: make repeater optional
phy: phy-snps-eusb2: split phy init code
phy: phy-snps-eusb2: refactor constructs names
phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory
...
54 files changed, 2386 insertions, 1033 deletions
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml index 580fbe37b37fa6..843d04027c306d 100644 --- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml @@ -18,6 +18,7 @@ properties: - brcm,bcm4908-usb-phy - brcm,bcm7211-usb-phy - brcm,bcm7216-usb-phy + - brcm,bcm74110-usb-phy - brcm,brcmstb-usb-phy reg: @@ -139,7 +140,9 @@ allOf: properties: compatible: contains: - const: brcm,bcm7216-usb-phy + enum: + - brcm,bcm7216-usb-phy + - brcm,bcm74110-usb-phy then: properties: reg: diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml index daee0c0fc91539..22dd91591a0942 100644 --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml @@ -43,15 +43,15 @@ properties: fsl,phy-tx-vref-tune-percent: description: Tunes the HS DC level relative to the nominal level - minimum: 94 + minimum: 90 maximum: 124 fsl,phy-tx-rise-tune-percent: description: Adjusts the rise/fall time duration of the HS waveform relative to its nominal value - minimum: 97 - maximum: 103 + minimum: 90 + maximum: 120 fsl,phy-tx-preemp-amp-tune-microamp: description: @@ -63,8 +63,7 @@ properties: fsl,phy-tx-vboost-level-microvolt: description: Adjust the boosted transmit launch pk-pk differential amplitude - minimum: 880 - maximum: 1120 + enum: [844, 1008, 1156] fsl,phy-comp-dis-tune-percent: description: @@ -113,6 +112,34 @@ allOf: maxItems: 1 - if: + properties: + compatible: + enum: + - fsl,imx8mq-usb-phy + - fsl,imx8mp-usb-phy + then: + properties: + fsl,phy-tx-vref-tune-percent: + minimum: 94 + fsl,phy-tx-rise-tune-percent: + minimum: 97 + maximum: 103 + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx95-usb-phy + then: + properties: + fsl,phy-tx-vref-tune-percent: + maximum: 108 + fsl,phy-comp-dis-tune-percent: + minimum: 94 + maximum: 104 + + - if: required: - orientation-switch then: diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml index f6e494d0d89b82..acdbce937b0a43 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml @@ -30,6 +30,7 @@ properties: - const: mediatek,mt8173-mipi-tx - items: - enum: + - mediatek,mt6893-mipi-tx - mediatek,mt8188-mipi-tx - mediatek,mt8195-mipi-tx - mediatek,mt8365-mipi-tx diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index 6be3aa4557e55d..b2218c15193917 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -78,6 +78,7 @@ properties: - items: - enum: - mediatek,mt2712-tphy + - mediatek,mt6893-tphy - mediatek,mt7629-tphy - mediatek,mt7986-tphy - mediatek,mt8183-tphy diff --git a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml index a9e3139fd421de..0bed847bb4ad77 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml @@ -49,6 +49,7 @@ properties: - enum: - mediatek,mt3611-xsphy - mediatek,mt3612-xsphy + - mediatek,mt7988-xsphy - const: mediatek,xsphy reg: @@ -150,6 +151,21 @@ patternProperties: minimum: 1 maximum: 31 + mediatek,syscon-type: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + A phandle to syscon used to access the register of type switch, + the field should always be 3 cells long. + items: + - items: + - description: + Phandle to phy type configuration system controller + - description: + Phy type configuration register offset + - description: + Index of config segment + enum: [0, 1, 2, 3] + required: - reg - clocks diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml index 15dc8efe6ffe74..9af39b33646ac0 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -99,8 +99,7 @@ patternProperties: Specifies the type of PHY for which the group of PHY lanes is used. Refer include/dt-bindings/phy/phy.h. Constants from the header should be used. $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 1 - maximum: 9 + enum: [1, 2, 3, 4, 5, 6, 7, 8, 9, 12] cdns,num-lanes: description: diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml index 888e6b2aac5a18..3e101c3c5ea998 100644 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml @@ -42,6 +42,9 @@ properties: - const: phy - const: apb + phy-supply: + description: Single PHY regulator + rockchip,enable-ssc: type: boolean description: diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt deleted file mode 100644 index 960da7fcaa9e4d..00000000000000 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt +++ /dev/null @@ -1,84 +0,0 @@ -* ROCKCHIP type-c PHY ---------------------- - -Required properties: - - compatible : must be "rockchip,rk3399-typec-phy" - - reg: Address and length of the usb phy control register set - - rockchip,grf : phandle to the syscon managing the "general - register files" - - clocks : phandle + clock specifier for the phy clocks - - clock-names : string, clock name, must be "tcpdcore", "tcpdphy-ref"; - - assigned-clocks: main clock, should be <&cru SCLK_UPHY0_TCPDCORE> or - <&cru SCLK_UPHY1_TCPDCORE>; - - assigned-clock-rates : the phy core clk frequency, shall be: 50000000 - - resets : a list of phandle + reset specifier pairs - - reset-names : string reset name, must be: - "uphy", "uphy-pipe", "uphy-tcphy" - -Optional properties: - - extcon : extcon specifier for the Power Delivery - -Required nodes : a sub-node is required for each port the phy provides. - The sub-node name is used to identify dp or usb3 port, - and shall be the following entries: - * "dp-port" : the name of DP port. - * "usb3-port" : the name of USB3 port. - -Required properties (port (child) node): -- #phy-cells : must be 0, See ./phy-bindings.txt for details. - -Deprecated properties, do not use in new device tree sources, these -properties are determined by the compatible value: - - rockchip,typec-conn-dir - - rockchip,usb3tousb2-en - - rockchip,external-psm - - rockchip,pipe-status - -Example: - tcphy0: phy@ff7c0000 { - compatible = "rockchip,rk3399-typec-phy"; - reg = <0x0 0xff7c0000 0x0 0x40000>; - rockchip,grf = <&grf>; - extcon = <&fusb0>; - clocks = <&cru SCLK_UPHY0_TCPDCORE>, - <&cru SCLK_UPHY0_TCPDPHY_REF>; - clock-names = "tcpdcore", "tcpdphy-ref"; - assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>; - assigned-clock-rates = <50000000>; - resets = <&cru SRST_UPHY0>, - <&cru SRST_UPHY0_PIPE_L00>, - <&cru SRST_P_UPHY0_TCPHY>; - reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; - - tcphy0_dp: dp-port { - #phy-cells = <0>; - }; - - tcphy0_usb3: usb3-port { - #phy-cells = <0>; - }; - }; - - tcphy1: phy@ff800000 { - compatible = "rockchip,rk3399-typec-phy"; - reg = <0x0 0xff800000 0x0 0x40000>; - rockchip,grf = <&grf>; - extcon = <&fusb1>; - clocks = <&cru SCLK_UPHY1_TCPDCORE>, - <&cru SCLK_UPHY1_TCPDPHY_REF>; - clock-names = "tcpdcore", "tcpdphy-ref"; - assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>; - assigned-clock-rates = <50000000>; - resets = <&cru SRST_UPHY1>, - <&cru SRST_UPHY1_PIPE_L00>, - <&cru SRST_P_UPHY1_TCPHY>; - reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; - - tcphy1_dp: dp-port { - #phy-cells = <0>; - }; - - tcphy1_usb3: usb3-port { - #phy-cells = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml index b42f1272903d80..8b7059d5b1826f 100644 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml @@ -47,6 +47,9 @@ properties: - const: pcs_apb - const: pma_apb + phy-supply: + description: Single PHY regulator + rockchip,dp-lane-mux: $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml index e39168d55d23c6..6e9df81441e94d 100644 --- a/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml @@ -11,26 +11,24 @@ maintainers: - Varadarajan Narayanan <quic_varada@quicinc.com> description: - PCIe and USB combo PHY found in Qualcomm IPQ5332 SoC + PCIe and USB combo PHY found in Qualcomm IPQ5018 & IPQ5332 SoCs properties: compatible: enum: + - qcom,ipq5018-uniphy-pcie-phy - qcom,ipq5332-uniphy-pcie-phy reg: maxItems: 1 clocks: - items: - - description: pcie pipe clock - - description: pcie ahb clock + minItems: 1 + maxItems: 2 resets: - items: - - description: phy reset - - description: ahb reset - - description: cfg reset + minItems: 2 + maxItems: 3 "#phy-cells": const: 0 @@ -53,6 +51,41 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq5018-uniphy-pcie-phy + then: + properties: + clocks: + items: + - description: pcie pipe clock + resets: + items: + - description: phy reset + - description: cfg reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq5332-uniphy-pcie-phy + then: + properties: + clocks: + items: + - description: pcie pipe clock + - description: pcie ahb clock + resets: + items: + - description: phy reset + - description: ahb reset + - description: cfg reset + examples: - | #include <dt-bindings/clock/qcom,ipq5332-gcc.h> diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml index af275cea3456be..2822dce8d9f405 100644 --- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml @@ -16,6 +16,7 @@ properties: - enum: - renesas,usb2-phy-r8a77470 # RZ/G1C - renesas,usb2-phy-r9a08g045 # RZ/G3S + - renesas,usb2-phy-r9a09g057 # RZ/V2H(P) - items: - enum: @@ -105,8 +106,13 @@ allOf: properties: compatible: contains: - const: renesas,rzg2l-usb2-phy + enum: + - renesas,usb2-phy-r9a09g057 + - renesas,rzg2l-usb2-phy then: + properties: + clocks: + minItems: 2 required: - resets diff --git a/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml index 6a7ef556414ceb..58e735b5dd05a8 100644 --- a/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml +++ b/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml @@ -13,12 +13,14 @@ properties: compatible: enum: - rockchip,px30-usb2phy + - rockchip,rk3036-usb2phy - rockchip,rk3128-usb2phy - rockchip,rk3228-usb2phy - rockchip,rk3308-usb2phy - rockchip,rk3328-usb2phy - rockchip,rk3366-usb2phy - rockchip,rk3399-usb2phy + - rockchip,rk3562-usb2phy - rockchip,rk3568-usb2phy - rockchip,rk3576-usb2phy - rockchip,rk3588-usb2phy @@ -184,12 +186,14 @@ allOf: contains: enum: - rockchip,px30-usb2phy + - rockchip,rk3036-usb2phy - rockchip,rk3128-usb2phy - rockchip,rk3228-usb2phy - rockchip,rk3308-usb2phy - rockchip,rk3328-usb2phy - rockchip,rk3366-usb2phy - rockchip,rk3399-usb2phy + - rockchip,rk3562-usb2phy - rockchip,rk3568-usb2phy - rockchip,rk3588-usb2phy - rockchip,rv1108-usb2phy diff --git a/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml index ba67dca5a446fe..d7de8b527c5c43 100644 --- a/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml +++ b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml @@ -46,6 +46,9 @@ properties: reset-names: const: phy + phy-supply: + description: Single PHY regulator + rockchip,phy-grf: $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the syscon managing the phy "general register files" diff --git a/Documentation/devicetree/bindings/phy/rockchip,rk3399-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,rk3399-pcie-phy.yaml new file mode 100644 index 00000000000000..f46f065e5dbe4d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rockchip,rk3399-pcie-phy.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/rockchip,rk3399-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3399 PCIE PHY + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + const: rockchip,rk3399-pcie-phy + + '#phy-cells': + oneOf: + - const: 0 + deprecated: true + - const: 1 + description: One lane per phy mode + + clocks: + maxItems: 1 + + clock-names: + const: refclk + + resets: + maxItems: 1 + + reset-names: + const: phy + +required: + - compatible + - '#phy-cells' + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml new file mode 100644 index 00000000000000..91c011f68cd077 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/rockchip,rk3399-typec-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Type-C PHY + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + const: rockchip,rk3399-typec-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: tcpdcore + - const: tcpdphy-ref + + extcon: true + + power-domains: + maxItems: 1 + + resets: + maxItems: 3 + + reset-names: + items: + - const: uphy + - const: uphy-pipe + - const: uphy-tcphy + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF). + + dp-port: + type: object + additionalProperties: false + + properties: + '#phy-cells': + const: 0 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Connection to USB Type-C connector + + required: + - '#phy-cells' + + usb3-port: + type: object + additionalProperties: false + + properties: + '#phy-cells': + const: 0 + + orientation-switch: true + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Connection to USB Type-C connector SS port + + required: + - '#phy-cells' + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - dp-port + - usb3-port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + + phy@ff7c0000 { + compatible = "rockchip,rk3399-typec-phy"; + reg = <0xff7c0000 0x40000>; + rockchip,grf = <&grf>; + extcon = <&fusb0>; + clocks = <&cru SCLK_UPHY0_TCPDCORE>, + <&cru SCLK_UPHY0_TCPDPHY_REF>; + clock-names = "tcpdcore", "tcpdphy-ref"; + resets = <&cru SRST_UPHY0>, + <&cru SRST_UPHY0_PIPE_L00>, + <&cru SRST_P_UPHY0_TCPHY>; + reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; + + dp-port { + #phy-cells = <0>; + }; + + usb3-port { + #phy-cells = <0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt deleted file mode 100644 index b496042f1f4436..00000000000000 --- a/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt +++ /dev/null @@ -1,36 +0,0 @@ -Rockchip PCIE PHY ------------------------ - -Required properties: - - compatible: rockchip,rk3399-pcie-phy - - clocks: Must contain an entry in clock-names. - See ../clocks/clock-bindings.txt for details. - - clock-names: Must be "refclk" - - resets: Must contain an entry in reset-names. - See ../reset/reset.txt for details. - - reset-names: Must be "phy" - -Required properties for legacy PHY mode (deprecated): - - #phy-cells: must be 0 - -Required properties for per-lane PHY mode (preferred): - - #phy-cells: must be 1 - -Example: - -grf: syscon@ff770000 { - compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - - ... - - pcie_phy: pcie-phy { - compatible = "rockchip,rk3399-pcie-phy"; - #phy-cells = <0>; - clocks = <&cru SCLK_PCIEPHY_REF>; - clock-names = "refclk"; - resets = <&cru SRST_PCIEPHY>; - reset-names = "phy"; - }; -}; diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos2200-eusb2-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos2200-eusb2-phy.yaml new file mode 100644 index 00000000000000..5e7e1bc2e39a46 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/samsung,exynos2200-eusb2-phy.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/samsung,exynos2200-eusb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos2200 eUSB2 phy controller + +maintainers: + - Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + +description: + Samsung Exynos2200 eUSB2 phy, based on Synopsys eUSB2 IP block, supports + LS/FS/HS usb connectivity. + +properties: + compatible: + enum: + - samsung,exynos2200-eusb2-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: Reference clock + - description: Bus (APB) clock + - description: Control clock + + clock-names: + items: + - const: ref + - const: bus + - const: ctrl + + resets: + maxItems: 1 + + phys: + maxItems: 1 + description: + Phandle to eUSB2 to USB 2.0 repeater + + vdd-supply: + description: + Phandle to 0.88V regulator supply to PHY digital circuit. + + vdda12-supply: + description: + Phandle to 1.2V regulator supply to PHY refclk pll block. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - vdd-supply + - vdda12-supply + +additionalProperties: false + +examples: + - | + usb_hsphy: phy@10ab0000 { + compatible = "samsung,exynos2200-eusb2-phy"; + reg = <0x10ab0000 0x10000>; + #phy-cells = <0>; + + clocks = <&cmu_hsi0 7>, + <&cmu_hsi0 5>, + <&cmu_hsi0 8>; + clock-names = "ref", "bus", "ctrl"; + + vdd-supply = <&vreg_0p88>; + vdda12-supply = <&vreg_1p2>; + }; diff --git a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml index 27295acbba7674..cc60d2f6f70e32 100644 --- a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml @@ -26,31 +26,41 @@ properties: compatible: enum: - google,gs101-usb31drd-phy + - samsung,exynos2200-usb32drd-phy - samsung,exynos5250-usbdrd-phy - samsung,exynos5420-usbdrd-phy - samsung,exynos5433-usbdrd-phy - samsung,exynos7-usbdrd-phy + - samsung,exynos7870-usbdrd-phy - samsung,exynos850-usbdrd-phy clocks: - minItems: 2 + minItems: 1 maxItems: 5 clock-names: - minItems: 2 + minItems: 1 maxItems: 5 description: | - At least two clocks:: + Typically two clocks: - Main PHY clock (same as USB DRD controller i.e. DWC3 IP clock), used for register access. - PHY reference clock (usually crystal clock), used for PHY operations, associated by phy name. It is used to determine bit values for clock settings register. For Exynos5420 this is given as 'sclk_usbphy30' - in the CMU. + in the CMU. It's not needed for Exynos2200. "#phy-cells": const: 1 + phys: + maxItems: 1 + description: + USBDRD-underlying high-speed PHY + + phy-names: + const: hs + port: $ref: /schemas/graph.yaml#/properties/port description: @@ -155,6 +165,27 @@ allOf: compatible: contains: enum: + - samsung,exynos2200-usb32drd-phy + then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: phy + reg: + maxItems: 1 + reg-names: + maxItems: 1 + required: + - phys + - phy-names + + - if: + properties: + compatible: + contains: + enum: - samsung,exynos5433-usbdrd-phy - samsung,exynos7-usbdrd-phy then: @@ -184,6 +215,7 @@ allOf: enum: - samsung,exynos5250-usbdrd-phy - samsung,exynos5420-usbdrd-phy + - samsung,exynos7870-usbdrd-phy - samsung,exynos850-usbdrd-phy then: properties: diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index 8cbf5b6772ddff..ccdcc889ba8ef2 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -208,8 +208,8 @@ allOf: pcie-phy: type: object - description: - Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt + $ref: /schemas/phy/rockchip,rk3399-pcie-phy.yaml# + unevaluatedProperties: false patternProperties: "^phy@[0-9a-f]+$": @@ -333,6 +333,15 @@ examples: #phy-cells = <0>; }; + pcie-phy { + compatible = "rockchip,rk3399-pcie-phy"; + #phy-cells = <1>; + clocks = <&cru SCLK_PCIEPHY_REF>; + clock-names = "refclk"; + resets = <&cru SRST_PCIEPHY>; + reset-names = "phy"; + }; + phy@f780 { compatible = "rockchip,rk3399-emmc-phy"; reg = <0xf780 0x20>; diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml index fba2cb05ecbae9..fd1b13c0ed6bb3 100644 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml @@ -18,7 +18,7 @@ description: Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml Type-C PHY - Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt + Documentation/devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml select: properties: diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 8d58efe998ec5f..58c911e1b2d20a 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -43,6 +43,14 @@ config PHY_PISTACHIO_USB help Enable this to support the USB2.0 PHY on the IMG Pistachio SoC. +config PHY_SNPS_EUSB2 + tristate "SNPS eUSB2 PHY Driver" + depends on OF && (ARCH_EXYNOS || ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable support for the USB high-speed SNPS eUSB2 phy on select + SoCs. The PHY is usually paired with a Synopsys DWC3 USB controller. + config PHY_XGENE tristate "APM X-Gene 15Gbps PHY support" depends on HAS_IOMEM && OF && (ARCH_XGENE || COMPILE_TEST) diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index e281442acc7528..c670a8dac46807 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_PHY_CAN_TRANSCEIVER) += phy-can-transceiver.o obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o +obj-$(CONFIG_PHY_SNPS_EUSB2) += phy-snps-eusb2.o obj-$(CONFIG_USB_LGM_PHY) += phy-lgm-usb.o obj-$(CONFIG_PHY_AIROHA_PCIE) += phy-airoha-pcie.o obj-$(CONFIG_PHY_NXP_PTN3222) += phy-nxp-ptn3222.o diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c index 08a86962d94924..c4a56b9d328976 100644 --- a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c +++ b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c @@ -377,13 +377,9 @@ static int phy_meson_axg_mipi_dphy_probe(struct platform_device *pdev) return ret; phy = devm_phy_create(dev, NULL, &phy_meson_axg_mipi_dphy_ops); - if (IS_ERR(phy)) { - ret = PTR_ERR(phy); - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to create PHY\n"); - - return ret; - } + if (IS_ERR(phy)) + return dev_err_probe(dev, PTR_ERR(phy), + "failed to create PHY\n"); phy_set_drvdata(phy, priv); diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c index ae898f93f97b20..c0ba2852dbb8e2 100644 --- a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c +++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c @@ -200,7 +200,6 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev) struct phy_axg_mipi_pcie_analog_priv *priv; struct device_node *np = dev->of_node, *parent_np; struct regmap *map; - int ret; priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -219,12 +218,9 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev) priv->regmap = map; priv->phy = devm_phy_create(dev, np, &phy_axg_mipi_pcie_analog_ops); - if (IS_ERR(priv->phy)) { - ret = PTR_ERR(priv->phy); - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to create PHY\n"); - return ret; - } + if (IS_ERR(priv->phy)) + return dev_err_probe(dev, PTR_ERR(priv->phy), + "failed to create PHY\n"); phy_set_drvdata(priv->phy, priv); dev_set_drvdata(dev, priv); diff --git a/drivers/phy/amlogic/phy-meson-axg-pcie.c b/drivers/phy/amlogic/phy-meson-axg-pcie.c index 60be5cdc600b32..14dee73f9cb570 100644 --- a/drivers/phy/amlogic/phy-meson-axg-pcie.c +++ b/drivers/phy/amlogic/phy-meson-axg-pcie.c @@ -131,20 +131,11 @@ static int phy_axg_pcie_probe(struct platform_device *pdev) struct phy_axg_pcie_priv *priv; struct device_node *np = dev->of_node; void __iomem *base; - int ret; priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; - priv->phy = devm_phy_create(dev, np, &phy_axg_pcie_ops); - if (IS_ERR(priv->phy)) { - ret = PTR_ERR(priv->phy); - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to create PHY\n"); - return ret; - } - base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); @@ -162,6 +153,11 @@ static int phy_axg_pcie_probe(struct platform_device *pdev) if (IS_ERR(priv->analog)) return PTR_ERR(priv->analog); + priv->phy = devm_phy_create(dev, np, &phy_axg_pcie_ops); + if (IS_ERR(priv->phy)) + return dev_err_probe(dev, PTR_ERR(priv->phy), + "failed to create PHY\n"); + phy_set_drvdata(priv->phy, priv); dev_set_drvdata(dev, priv); pphy = devm_of_phy_provider_register(dev, of_phy_simple_xlate); diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb2.c b/drivers/phy/amlogic/phy-meson-g12a-usb2.c index 0e0b5c00b676f4..66bf0b7ef8ed38 100644 --- a/drivers/phy/amlogic/phy-meson-g12a-usb2.c +++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c @@ -339,13 +339,9 @@ static int phy_meson_g12a_usb2_probe(struct platform_device *pdev) return ret; phy = devm_phy_create(dev, NULL, &phy_meson_g12a_usb2_ops); - if (IS_ERR(phy)) { - ret = PTR_ERR(phy); - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to create PHY\n"); - - return ret; - } + if (IS_ERR(phy)) + return dev_err_probe(dev, PTR_ERR(phy), + "failed to create PHY\n"); phy_set_bus_width(phy, 8); phy_set_drvdata(phy, priv); diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c index 14ea89927ab142..6b390304f723ca 100644 --- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c +++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c @@ -237,7 +237,6 @@ static int phy_meson_gxl_usb2_probe(struct platform_device *pdev) struct phy_meson_gxl_usb2_priv *priv; struct phy *phy; void __iomem *base; - int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -266,13 +265,9 @@ static int phy_meson_gxl_usb2_probe(struct platform_device *pdev) return PTR_ERR(priv->reset); phy = devm_phy_create(dev, NULL, &phy_meson_gxl_usb2_ops); - if (IS_ERR(phy)) { - ret = PTR_ERR(phy); - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to create PHY\n"); - - return ret; - } + if (IS_ERR(phy)) + return dev_err_probe(dev, PTR_ERR(phy), + "failed to create PHY\n"); phy_set_drvdata(phy, priv); diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c index d63147c41b8c96..a553231a9f7c88 100644 --- a/drivers/phy/amlogic/phy-meson8b-usb2.c +++ b/drivers/phy/amlogic/phy-meson8b-usb2.c @@ -5,6 +5,7 @@ * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com> */ +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> @@ -39,9 +40,7 @@ #define REG_CTRL_TX_BITSTUFF_ENN BIT(18) #define REG_CTRL_COMMON_ON BIT(19) #define REG_CTRL_REF_CLK_SEL_MASK GENMASK(21, 20) - #define REG_CTRL_REF_CLK_SEL_SHIFT 20 #define REG_CTRL_FSEL_MASK GENMASK(24, 22) - #define REG_CTRL_FSEL_SHIFT 22 #define REG_CTRL_PORT_RESET BIT(25) #define REG_CTRL_THREAD_ID_MASK GENMASK(31, 26) @@ -166,33 +165,29 @@ static int phy_meson8b_usb2_power_on(struct phy *phy) return ret; } - regmap_update_bits(priv->regmap, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL, - REG_CONFIG_CLK_32k_ALTSEL); + regmap_set_bits(priv->regmap, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL); regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK, - 0x2 << REG_CTRL_REF_CLK_SEL_SHIFT); + FIELD_PREP(REG_CTRL_REF_CLK_SEL_MASK, 0x2)); regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_FSEL_MASK, - 0x5 << REG_CTRL_FSEL_SHIFT); + FIELD_PREP(REG_CTRL_FSEL_MASK, 0x5)); /* reset the PHY */ - regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET, - REG_CTRL_POWER_ON_RESET); + regmap_set_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET); udelay(RESET_COMPLETE_TIME); - regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET, 0); + regmap_clear_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET); udelay(RESET_COMPLETE_TIME); - regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT, - REG_CTRL_SOF_TOGGLE_OUT); + regmap_set_bits(priv->regmap, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT); if (priv->dr_mode == USB_DR_MODE_HOST) { - regmap_update_bits(priv->regmap, REG_DBG_UART, - REG_DBG_UART_SET_IDDQ, 0); + regmap_clear_bits(priv->regmap, REG_DBG_UART, + REG_DBG_UART_SET_IDDQ); if (priv->match->host_enable_aca) { - regmap_update_bits(priv->regmap, REG_ADP_BC, - REG_ADP_BC_ACA_ENABLE, - REG_ADP_BC_ACA_ENABLE); + regmap_set_bits(priv->regmap, REG_ADP_BC, + REG_ADP_BC_ACA_ENABLE); udelay(ACA_ENABLE_COMPLETE_TIME); @@ -215,17 +210,15 @@ static int phy_meson8b_usb2_power_off(struct phy *phy) struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy); if (priv->dr_mode == USB_DR_MODE_HOST) - regmap_update_bits(priv->regmap, REG_DBG_UART, - REG_DBG_UART_SET_IDDQ, - REG_DBG_UART_SET_IDDQ); + regmap_set_bits(priv->regmap, REG_DBG_UART, + REG_DBG_UART_SET_IDDQ); clk_disable_unprepare(priv->clk_usb); clk_disable_unprepare(priv->clk_usb_general); reset_control_rearm(priv->reset); /* power off the PHY by putting it into reset mode */ - regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET, - REG_CTRL_POWER_ON_RESET); + regmap_set_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET); return 0; } diff --git a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c index dc452610934add..8a5ed50f2da074 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c @@ -43,6 +43,8 @@ #define USB_CTRL_SETUP_tca_drv_sel_MASK BIT(24) #define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK BIT(25) #define USB_CTRL_USB_PM 0x04 +#define USB_CTRL_USB_PM_REF_S2_CLK_SWITCH_EN_MASK BIT(1) +#define USB_CTRL_USB_PM_UTMI_S2_CLK_SWITCH_EN_MASK BIT(2) #define USB_CTRL_USB_PM_XHC_S2_CLK_SWITCH_EN_MASK BIT(3) #define USB_CTRL_USB_PM_XHC_PME_EN_MASK BIT(4) #define USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK BIT(22) @@ -61,6 +63,13 @@ #define USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK BIT(18) #define USB_CTRL_P0_U2PHY_CFG1 0x68 #define USB_CTRL_P0_U2PHY_CFG1_COMMONONN_MASK BIT(10) +#define USB_CTRL_P0_U2PHY_CFG2 0x6c +#define USB_CTRL_P0_U2PHY_CFG2_TXVREFTUNE0_MASK GENMASK(20, 17) +#define USB_CTRL_P0_U2PHY_CFG2_TXVREFTUNE0_SHIFT 17 +#define USB_CTRL_P0_U2PHY_CFG2_TXRESTUNE0_MASK GENMASK(24, 23) +#define USB_CTRL_P0_U2PHY_CFG2_TXRESTUNE0_SHIFT 23 +#define USB_CTRL_P0_U2PHY_CFG2_TXPREEMPAMPTUNE0_MASK GENMASK(26, 25) +#define USB_CTRL_P0_U2PHY_CFG2_TXPREEMPAMPTUNE0_SHIFT 25 /* Register definitions for the USB_PHY block in 7211b0 */ #define USB_PHY_PLL_CTL 0x00 @@ -369,6 +378,42 @@ static void usb_uninit_common_7216(struct brcm_usb_init_params *params) } } +static void usb_init_common_74110(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM)); + reg &= ~(USB_CTRL_MASK(USB_PM, REF_S2_CLK_SWITCH_EN) | + USB_CTRL_MASK(USB_PM, UTMI_S2_CLK_SWITCH_EN)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM)); + + usb_init_common_7216(params); + + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, P0_U2PHY_CFG2)); + reg &= ~(USB_CTRL_P0_U2PHY_CFG2_TXVREFTUNE0_MASK | + USB_CTRL_P0_U2PHY_CFG2_TXRESTUNE0_MASK | + USB_CTRL_P0_U2PHY_CFG2_TXPREEMPAMPTUNE0_MASK); + reg |= (0x6 << USB_CTRL_P0_U2PHY_CFG2_TXVREFTUNE0_SHIFT) | + (0x3 << USB_CTRL_P0_U2PHY_CFG2_TXRESTUNE0_SHIFT) | + (0x2 << USB_CTRL_P0_U2PHY_CFG2_TXPREEMPAMPTUNE0_SHIFT); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, P0_U2PHY_CFG2)); +} + +static void usb_uninit_common_74110(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + + if (params->wake_enabled) { + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM)); + reg |= (USB_CTRL_MASK(USB_PM, REF_S2_CLK_SWITCH_EN) | + USB_CTRL_MASK(USB_PM, UTMI_S2_CLK_SWITCH_EN)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM)); + } + usb_uninit_common_7216(params); +} + static void usb_uninit_common_7211b0(struct brcm_usb_init_params *params) { void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; @@ -426,6 +471,16 @@ static void usb_set_dual_select(struct brcm_usb_init_params *params) brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); } +static const struct brcm_usb_init_ops bcm74110_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common_74110, + .init_xhci = usb_init_xhci, + .uninit_common = usb_uninit_common_74110, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +}; + static const struct brcm_usb_init_ops bcm7216_ops = { .init_ipp = usb_init_ipp, .init_common = usb_init_common_7216, @@ -446,6 +501,12 @@ static const struct brcm_usb_init_ops bcm7211b0_ops = { .set_dual_select = usb_set_dual_select, }; +void brcm_usb_dvr_init_74110(struct brcm_usb_init_params *params) +{ + params->family_name = "74110"; + params->ops = &bcm74110_ops; +} + void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params) { diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.h b/drivers/phy/broadcom/phy-brcm-usb-init.h index c1a88f5cd4cd8e..4c7be78d0b14cb 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init.h +++ b/drivers/phy/broadcom/phy-brcm-usb-init.h @@ -72,6 +72,7 @@ struct brcm_usb_init_params { bool wake_enabled; }; +void brcm_usb_dvr_init_74110(struct brcm_usb_init_params *params); void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params); void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params); void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params); diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c index 6362ca5b7fb6b5..0666864c2f7763 100644 --- a/drivers/phy/broadcom/phy-brcm-usb.c +++ b/drivers/phy/broadcom/phy-brcm-usb.c @@ -283,6 +283,16 @@ static const struct attribute_group brcm_usb_phy_group = { .attrs = brcm_usb_phy_attrs, }; +static const struct match_chip_info chip_info_74110 = { + .init_func = &brcm_usb_dvr_init_74110, + .required_regs = { + BRCM_REGS_CTRL, + BRCM_REGS_XHCI_EC, + BRCM_REGS_XHCI_GBL, + -1, + }, +}; + static const struct match_chip_info chip_info_4908 = { .init_func = &brcm_usb_dvr_init_4908, .required_regs = { @@ -326,6 +336,10 @@ static const struct match_chip_info chip_info_7445 = { static const struct of_device_id brcm_usb_dt_ids[] = { { + .compatible = "brcm,bcm74110-usb-phy", + .data = &chip_info_74110, + }, + { .compatible = "brcm,bcm4908-usb-phy", .data = &chip_info_4908, }, diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c index 7355d9921b6467..68fcc8114d750a 100644 --- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c +++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c @@ -238,24 +238,21 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev) imx8_phy->clkreq_unused = false; imx8_phy->clk = devm_clk_get(dev, "ref"); - if (IS_ERR(imx8_phy->clk)) { - dev_err(dev, "failed to get imx pcie phy clock\n"); - return PTR_ERR(imx8_phy->clk); - } + if (IS_ERR(imx8_phy->clk)) + return dev_err_probe(dev, PTR_ERR(imx8_phy->clk), + "failed to get imx pcie phy clock\n"); /* Grab GPR config register range */ imx8_phy->iomuxc_gpr = syscon_regmap_lookup_by_compatible(imx8_phy->drvdata->gpr); - if (IS_ERR(imx8_phy->iomuxc_gpr)) { - dev_err(dev, "unable to find iomuxc registers\n"); - return PTR_ERR(imx8_phy->iomuxc_gpr); - } + if (IS_ERR(imx8_phy->iomuxc_gpr)) + return dev_err_probe(dev, PTR_ERR(imx8_phy->iomuxc_gpr), + "unable to find iomuxc registers\n"); imx8_phy->reset = devm_reset_control_get_exclusive(dev, "pciephy"); - if (IS_ERR(imx8_phy->reset)) { - dev_err(dev, "Failed to get PCIEPHY reset control\n"); - return PTR_ERR(imx8_phy->reset); - } + if (IS_ERR(imx8_phy->reset)) + return dev_err_probe(dev, PTR_ERR(imx8_phy->reset), + "Failed to get PCIEPHY reset control\n"); if (imx8_phy->drvdata->variant == IMX8MP) { imx8_phy->perst = diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c index a974ef94de9a08..b94f242420fc73 100644 --- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c +++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c @@ -293,6 +293,28 @@ static u32 phy_tx_vref_tune_from_property(u32 percent) return DIV_ROUND_CLOSEST(percent - 94U, 2); } +static u32 imx95_phy_tx_vref_tune_from_property(u32 percent) +{ + percent = clamp(percent, 90U, 108U); + + switch (percent) { + case 90 ... 91: + percent = 0; + break; + case 92 ... 96: + percent -= 91; + break; + case 97 ... 104: + percent -= 92; + break; + case 105 ... 108: + percent -= 93; + break; + } + + return percent; +} + static u32 phy_tx_rise_tune_from_property(u32 percent) { switch (percent) { @@ -307,6 +329,22 @@ static u32 phy_tx_rise_tune_from_property(u32 percent) } } +static u32 imx95_phy_tx_rise_tune_from_property(u32 percent) +{ + percent = clamp(percent, 90U, 120U); + + switch (percent) { + case 90 ... 99: + return 3; + case 101 ... 115: + return 1; + case 116 ... 120: + return 0; + default: + return 2; + } +} + static u32 phy_tx_preemp_amp_tune_from_property(u32 microamp) { microamp = min(microamp, 1800U); @@ -317,12 +355,12 @@ static u32 phy_tx_preemp_amp_tune_from_property(u32 microamp) static u32 phy_tx_vboost_level_from_property(u32 microvolt) { switch (microvolt) { - case 0 ... 960: - return 0; - case 961 ... 1160: - return 2; - default: + case 1156: + return 5; + case 844: return 3; + default: + return 4; } } @@ -352,6 +390,29 @@ static u32 phy_comp_dis_tune_from_property(u32 percent) return 7; } } + +static u32 imx95_phy_comp_dis_tune_from_property(u32 percent) +{ + percent = clamp(percent, 94, 104); + + switch (percent) { + case 94 ... 95: + percent = 0; + break; + case 96 ... 98: + percent -= 95; + break; + case 99 ... 102: + percent -= 96; + break; + case 103 ... 104: + percent -= 97; + break; + } + + return percent; +} + static u32 phy_pcs_tx_swing_full_from_property(u32 percent) { percent = min(percent, 100U); @@ -362,10 +423,17 @@ static u32 phy_pcs_tx_swing_full_from_property(u32 percent) static void imx8m_get_phy_tuning_data(struct imx8mq_usb_phy *imx_phy) { struct device *dev = imx_phy->phy->dev.parent; + bool is_imx95 = false; + + if (device_is_compatible(dev, "fsl,imx95-usb-phy")) + is_imx95 = true; if (device_property_read_u32(dev, "fsl,phy-tx-vref-tune-percent", &imx_phy->tx_vref_tune)) imx_phy->tx_vref_tune = PHY_TUNE_DEFAULT; + else if (is_imx95) + imx_phy->tx_vref_tune = + imx95_phy_tx_vref_tune_from_property(imx_phy->tx_vref_tune); else imx_phy->tx_vref_tune = phy_tx_vref_tune_from_property(imx_phy->tx_vref_tune); @@ -373,6 +441,9 @@ static void imx8m_get_phy_tuning_data(struct imx8mq_usb_phy *imx_phy) if (device_property_read_u32(dev, "fsl,phy-tx-rise-tune-percent", &imx_phy->tx_rise_tune)) imx_phy->tx_rise_tune = PHY_TUNE_DEFAULT; + else if (is_imx95) + imx_phy->tx_rise_tune = + imx95_phy_tx_rise_tune_from_property(imx_phy->tx_rise_tune); else imx_phy->tx_rise_tune = phy_tx_rise_tune_from_property(imx_phy->tx_rise_tune); @@ -394,6 +465,9 @@ static void imx8m_get_phy_tuning_data(struct imx8mq_usb_phy *imx_phy) if (device_property_read_u32(dev, "fsl,phy-comp-dis-tune-percent", &imx_phy->comp_dis_tune)) imx_phy->comp_dis_tune = PHY_TUNE_DEFAULT; + else if (is_imx95) + imx_phy->comp_dis_tune = + imx95_phy_comp_dis_tune_from_property(imx_phy->comp_dis_tune); else imx_phy->comp_dis_tune = phy_comp_dis_tune_from_property(imx_phy->comp_dis_tune); diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c index 10fbe8dee116ba..191c282246d96e 100644 --- a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c +++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c @@ -456,6 +456,8 @@ static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy, int i, ret; u8 val; + phy->cur_cfg = cfg; + /* HDMI PHY init */ writeb(REG33_FIX_DA, phy->regs + PHY_REG(33)); @@ -508,7 +510,14 @@ static const struct phy_config *fsl_samsung_hdmi_phy_lookup_rate(unsigned long r if (phy_pll_cfg[i].pixclk <= rate) break; - return &phy_pll_cfg[i]; + /* If there is an exact match, or the array has been searched, return the value*/ + if (phy_pll_cfg[i].pixclk == rate || i + 1 > ARRAY_SIZE(phy_pll_cfg) - 1) + return &phy_pll_cfg[i]; + + /* See if the next entry is closer to nominal than this one */ + return (abs((long) rate - (long) phy_pll_cfg[i].pixclk) < + abs((long) rate - (long) phy_pll_cfg[i+1].pixclk) ? + &phy_pll_cfg[i] : &phy_pll_cfg[i+1]); } static void fsl_samsung_hdmi_calculate_phy(struct phy_config *cal_phy, unsigned long rate, @@ -521,18 +530,9 @@ static void fsl_samsung_hdmi_calculate_phy(struct phy_config *cal_phy, unsigned /* pll_div_regs 3-6 are fixed and pre-defined already */ } -static u32 fsl_samsung_hdmi_phy_get_closest_rate(unsigned long rate, - u32 int_div_clk, u32 frac_div_clk) -{ - /* Calculate the absolute value of the differences and return whichever is closest */ - if (abs((long)rate - (long)int_div_clk) < abs((long)(rate - (long)frac_div_clk))) - return int_div_clk; - - return frac_div_clk; -} - -static long phy_clk_round_rate(struct clk_hw *hw, - unsigned long rate, unsigned long *parent_rate) +static +const struct phy_config *fsl_samsung_hdmi_phy_find_settings(struct fsl_samsung_hdmi_phy *phy, + unsigned long rate) { const struct phy_config *fract_div_phy; u32 int_div_clk; @@ -541,83 +541,66 @@ static long phy_clk_round_rate(struct clk_hw *hw, /* If the clock is out of range return error instead of searching */ if (rate > 297000000 || rate < 22250000) - return -EINVAL; + return NULL; /* Search the fractional divider lookup table */ fract_div_phy = fsl_samsung_hdmi_phy_lookup_rate(rate); + if (fract_div_phy->pixclk == rate) { + dev_dbg(phy->dev, "fractional divider match = %u\n", fract_div_phy->pixclk); + return fract_div_phy; + } - /* If the rate is an exact match, return that value */ - if (rate == fract_div_phy->pixclk) - return fract_div_phy->pixclk; - - /* If the exact match isn't found, calculate the integer divider */ + /* Calculate the integer divider */ int_div_clk = fsl_samsung_hdmi_phy_find_pms(rate, &p, &m, &s); + fsl_samsung_hdmi_calculate_phy(&calculated_phy_pll_cfg, int_div_clk, p, m, s); + if (int_div_clk == rate) { + dev_dbg(phy->dev, "integer divider match = %u\n", calculated_phy_pll_cfg.pixclk); + return &calculated_phy_pll_cfg; + } - /* If the int_div_clk rate is an exact match, return that value */ - if (int_div_clk == rate) - return int_div_clk; + /* Calculate the absolute value of the differences and return whichever is closest */ + if (abs((long)rate - (long)int_div_clk) < + abs((long)rate - (long)fract_div_phy->pixclk)) { + dev_dbg(phy->dev, "integer divider = %u\n", calculated_phy_pll_cfg.pixclk); + return &calculated_phy_pll_cfg; + } - /* If neither rate is an exact match, use the value from the LUT */ - return fract_div_phy->pixclk; -} + dev_dbg(phy->dev, "fractional divider = %u\n", phy->cur_cfg->pixclk); -static int phy_use_fract_div(struct fsl_samsung_hdmi_phy *phy, const struct phy_config *fract_div_phy) -{ - phy->cur_cfg = fract_div_phy; - dev_dbg(phy->dev, "fsl_samsung_hdmi_phy: using fractional divider rate = %u\n", - phy->cur_cfg->pixclk); - return fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg); + return fract_div_phy; } -static int phy_use_integer_div(struct fsl_samsung_hdmi_phy *phy, - const struct phy_config *int_div_clk) +static long fsl_samsung_hdmi_phy_clk_round_rate(struct clk_hw *hw, + unsigned long rate, unsigned long *parent_rate) { - phy->cur_cfg = &calculated_phy_pll_cfg; - dev_dbg(phy->dev, "fsl_samsung_hdmi_phy: integer divider rate = %u\n", - phy->cur_cfg->pixclk); - return fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg); + struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw); + const struct phy_config *target_settings = fsl_samsung_hdmi_phy_find_settings(phy, rate); + + if (target_settings == NULL) + return -EINVAL; + + dev_dbg(phy->dev, "round_rate, closest rate = %u\n", target_settings->pixclk); + return target_settings->pixclk; } -static int phy_clk_set_rate(struct clk_hw *hw, +static int fsl_samsung_hdmi_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw); - const struct phy_config *fract_div_phy; - u32 int_div_clk; - u16 m; - u8 p, s; + const struct phy_config *target_settings = fsl_samsung_hdmi_phy_find_settings(phy, rate); - /* Search the fractional divider lookup table */ - fract_div_phy = fsl_samsung_hdmi_phy_lookup_rate(rate); - - /* If the rate is an exact match, use that value */ - if (fract_div_phy->pixclk == rate) - return phy_use_fract_div(phy, fract_div_phy); + if (target_settings == NULL) + return -EINVAL; - /* - * If the rate from the fractional divider is not exact, check the integer divider, - * and use it if that value is an exact match. - */ - int_div_clk = fsl_samsung_hdmi_phy_find_pms(rate, &p, &m, &s); - fsl_samsung_hdmi_calculate_phy(&calculated_phy_pll_cfg, int_div_clk, p, m, s); - if (int_div_clk == rate) - return phy_use_integer_div(phy, &calculated_phy_pll_cfg); + dev_dbg(phy->dev, "set_rate, closest rate = %u\n", target_settings->pixclk); - /* - * Compare the difference between the integer clock and the fractional clock against - * the desired clock and which whichever is closest. - */ - if (fsl_samsung_hdmi_phy_get_closest_rate(rate, int_div_clk, - fract_div_phy->pixclk) == fract_div_phy->pixclk) - return phy_use_fract_div(phy, fract_div_phy); - else - return phy_use_integer_div(phy, &calculated_phy_pll_cfg); + return fsl_samsung_hdmi_phy_configure(phy, target_settings); } static const struct clk_ops phy_clk_ops = { .recalc_rate = phy_clk_recalc_rate, - .round_rate = phy_clk_round_rate, - .set_rate = phy_clk_set_rate, + .round_rate = fsl_samsung_hdmi_phy_clk_round_rate, + .set_rate = fsl_samsung_hdmi_phy_clk_set_rate, }; static int phy_clk_register(struct fsl_samsung_hdmi_phy *phy) diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig index bdb87c97624359..bccd72dccb7792 100644 --- a/drivers/phy/marvell/Kconfig +++ b/drivers/phy/marvell/Kconfig @@ -29,7 +29,7 @@ config PHY_MVEBU_A3700_COMPHY depends on ARCH_MVEBU || COMPILE_TEST depends on OF depends on HAVE_ARM_SMCCC - default y + default ARCH_MVEBU select GENERIC_PHY help This driver allows to control the comphy, a hardware block providing @@ -40,7 +40,7 @@ config PHY_MVEBU_A3700_UTMI tristate "Marvell A3700 UTMI driver" depends on ARCH_MVEBU || COMPILE_TEST depends on OF - default y + default ARCH_MVEBU select GENERIC_PHY help Enable this to support Marvell A3700 UTMI PHY driver. diff --git a/drivers/phy/mediatek/phy-mtk-xsphy.c b/drivers/phy/mediatek/phy-mtk-xsphy.c index 7c248f5cfca5dc..c0ddb9273cc3f5 100644 --- a/drivers/phy/mediatek/phy-mtk-xsphy.c +++ b/drivers/phy/mediatek/phy-mtk-xsphy.c @@ -11,10 +11,12 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/iopoll.h> +#include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of_address.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/regmap.h> #include "phy-mtk-io.h" @@ -81,12 +83,22 @@ #define XSP_SR_COEF_DIVISOR 1000 #define XSP_FM_DET_CYCLE_CNT 1024 +/* PHY switch between pcie/usb3/sgmii */ +#define USB_PHY_SWITCH_CTRL 0x0 +#define RG_PHY_SW_TYPE GENMASK(3, 0) +#define RG_PHY_SW_PCIE 0x0 +#define RG_PHY_SW_USB3 0x1 +#define RG_PHY_SW_SGMII 0x2 + struct xsphy_instance { struct phy *phy; void __iomem *port_base; struct clk *ref_clk; /* reference clock of anolog phy */ u32 index; u32 type; + struct regmap *type_sw; + u32 type_sw_reg; + u32 type_sw_index; /* only for HQA test */ int efuse_intr; int efuse_tx_imp; @@ -259,6 +271,10 @@ static void phy_parse_property(struct mtk_xsphy *xsphy, inst->efuse_intr, inst->efuse_tx_imp, inst->efuse_rx_imp); break; + case PHY_TYPE_PCIE: + case PHY_TYPE_SGMII: + /* nothing to do */ + break; default: dev_err(xsphy->dev, "incompatible phy type\n"); return; @@ -305,6 +321,62 @@ static void u3_phy_props_set(struct mtk_xsphy *xsphy, RG_XTP_LN0_RX_IMPSEL, inst->efuse_rx_imp); } +/* type switch for usb3/pcie/sgmii */ +static int phy_type_syscon_get(struct xsphy_instance *instance, + struct device_node *dn) +{ + struct of_phandle_args args; + int ret; + + /* type switch function is optional */ + if (!of_property_present(dn, "mediatek,syscon-type")) + return 0; + + ret = of_parse_phandle_with_fixed_args(dn, "mediatek,syscon-type", + 2, 0, &args); + if (ret) + return ret; + + instance->type_sw_reg = args.args[0]; + instance->type_sw_index = args.args[1] & 0x3; /* <=3 */ + instance->type_sw = syscon_node_to_regmap(args.np); + of_node_put(args.np); + dev_info(&instance->phy->dev, "type_sw - reg %#x, index %d\n", + instance->type_sw_reg, instance->type_sw_index); + + return PTR_ERR_OR_ZERO(instance->type_sw); +} + +static int phy_type_set(struct xsphy_instance *instance) +{ + int type; + u32 offset; + + if (!instance->type_sw) + return 0; + + switch (instance->type) { + case PHY_TYPE_USB3: + type = RG_PHY_SW_USB3; + break; + case PHY_TYPE_PCIE: + type = RG_PHY_SW_PCIE; + break; + case PHY_TYPE_SGMII: + type = RG_PHY_SW_SGMII; + break; + case PHY_TYPE_USB2: + default: + return 0; + } + + offset = instance->type_sw_index * BITS_PER_BYTE; + regmap_update_bits(instance->type_sw, instance->type_sw_reg, + RG_PHY_SW_TYPE << offset, type << offset); + + return 0; +} + static int mtk_phy_init(struct phy *phy) { struct xsphy_instance *inst = phy_get_drvdata(phy); @@ -325,6 +397,10 @@ static int mtk_phy_init(struct phy *phy) case PHY_TYPE_USB3: u3_phy_props_set(xsphy, inst); break; + case PHY_TYPE_PCIE: + case PHY_TYPE_SGMII: + /* nothing to do, only used to set type */ + break; default: dev_err(xsphy->dev, "incompatible phy type\n"); clk_disable_unprepare(inst->ref_clk); @@ -403,12 +479,15 @@ static struct phy *mtk_phy_xlate(struct device *dev, inst->type = args->args[0]; if (!(inst->type == PHY_TYPE_USB2 || - inst->type == PHY_TYPE_USB3)) { + inst->type == PHY_TYPE_USB3 || + inst->type == PHY_TYPE_PCIE || + inst->type == PHY_TYPE_SGMII)) { dev_err(dev, "unsupported phy type: %d\n", inst->type); return ERR_PTR(-EINVAL); } phy_parse_property(xsphy, inst); + phy_type_set(inst); return inst->phy; } @@ -510,6 +589,10 @@ static int mtk_xsphy_probe(struct platform_device *pdev) dev_err(dev, "failed to get ref_clk(id-%d)\n", port); return PTR_ERR(inst->ref_clk); } + + retval = phy_type_syscon_get(inst, child_np); + if (retval) + return retval; } provider = devm_of_phy_provider_register(dev, mtk_phy_xlate); diff --git a/drivers/phy/phy-snps-eusb2.c b/drivers/phy/phy-snps-eusb2.c new file mode 100644 index 00000000000000..b73a1d7e57b32c --- /dev/null +++ b/drivers/phy/phy-snps-eusb2.c @@ -0,0 +1,627 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/iopoll.h> +#include <linux/mod_devicetable.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> + +#define EXYNOS_USB_PHY_HS_PHY_CTRL_RST (0x0) +#define USB_PHY_RST_MASK GENMASK(1, 0) +#define UTMI_PORT_RST_MASK GENMASK(5, 4) + +#define EXYNOS_USB_PHY_HS_PHY_CTRL_COMMON (0x4) +#define RPTR_MODE BIT(10) +#define FSEL_20_MHZ_VAL (0x1) +#define FSEL_24_MHZ_VAL (0x2) +#define FSEL_26_MHZ_VAL (0x3) +#define FSEL_48_MHZ_VAL (0x2) + +#define EXYNOS_USB_PHY_CFG_PLLCFG0 (0x8) +#define PHY_CFG_PLL_FB_DIV_19_8_MASK GENMASK(19, 8) +#define DIV_19_8_19_2_MHZ_VAL (0x170) +#define DIV_19_8_20_MHZ_VAL (0x160) +#define DIV_19_8_24_MHZ_VAL (0x120) +#define DIV_19_8_26_MHZ_VAL (0x107) +#define DIV_19_8_48_MHZ_VAL (0x120) + +#define EXYNOS_USB_PHY_CFG_PLLCFG1 (0xc) +#define EXYNOS_PHY_CFG_PLL_FB_DIV_11_8_MASK GENMASK(11, 8) +#define EXYNOS_DIV_11_8_19_2_MHZ_VAL (0x0) +#define EXYNOS_DIV_11_8_20_MHZ_VAL (0x0) +#define EXYNOS_DIV_11_8_24_MHZ_VAL (0x0) +#define EXYNOS_DIV_11_8_26_MHZ_VAL (0x0) +#define EXYNOS_DIV_11_8_48_MHZ_VAL (0x1) + +#define EXYNOS_PHY_CFG_TX (0x14) +#define EXYNOS_PHY_CFG_TX_FSLS_VREF_TUNE_MASK GENMASK(2, 1) + +#define EXYNOS_USB_PHY_UTMI_TESTSE (0x20) +#define TEST_IDDQ BIT(6) + +#define QCOM_USB_PHY_UTMI_CTRL0 (0x3c) +#define SLEEPM BIT(0) +#define OPMODE_MASK GENMASK(4, 3) +#define OPMODE_NONDRIVING BIT(3) + +#define QCOM_USB_PHY_UTMI_CTRL5 (0x50) +#define POR BIT(1) + +#define QCOM_USB_PHY_HS_PHY_CTRL_COMMON0 (0x54) +#define PHY_ENABLE BIT(0) +#define SIDDQ_SEL BIT(1) +#define SIDDQ BIT(2) +#define RETENABLEN BIT(3) +#define FSEL_MASK GENMASK(6, 4) +#define FSEL_19_2_MHZ_VAL (0x0) +#define FSEL_38_4_MHZ_VAL (0x4) + +#define QCOM_USB_PHY_CFG_CTRL_1 (0x58) +#define PHY_CFG_PLL_CPBIAS_CNTRL_MASK GENMASK(7, 1) + +#define QCOM_USB_PHY_CFG_CTRL_2 (0x5c) +#define PHY_CFG_PLL_FB_DIV_7_0_MASK GENMASK(7, 0) +#define DIV_7_0_19_2_MHZ_VAL (0x90) +#define DIV_7_0_38_4_MHZ_VAL (0xc8) + +#define QCOM_USB_PHY_CFG_CTRL_3 (0x60) +#define PHY_CFG_PLL_FB_DIV_11_8_MASK GENMASK(3, 0) +#define DIV_11_8_19_2_MHZ_VAL (0x1) +#define DIV_11_8_38_4_MHZ_VAL (0x0) + +#define PHY_CFG_PLL_REF_DIV GENMASK(7, 4) +#define PLL_REF_DIV_VAL (0x0) + +#define QCOM_USB_PHY_HS_PHY_CTRL2 (0x64) +#define VBUSVLDEXT0 BIT(0) +#define USB2_SUSPEND_N BIT(2) +#define USB2_SUSPEND_N_SEL BIT(3) +#define VBUS_DET_EXT_SEL BIT(4) + +#define QCOM_USB_PHY_CFG_CTRL_4 (0x68) +#define PHY_CFG_PLL_GMP_CNTRL_MASK GENMASK(1, 0) +#define PHY_CFG_PLL_INT_CNTRL_MASK GENMASK(7, 2) + +#define QCOM_USB_PHY_CFG_CTRL_5 (0x6c) +#define PHY_CFG_PLL_PROP_CNTRL_MASK GENMASK(4, 0) +#define PHY_CFG_PLL_VREF_TUNE_MASK GENMASK(7, 6) + +#define QCOM_USB_PHY_CFG_CTRL_6 (0x70) +#define PHY_CFG_PLL_VCO_CNTRL_MASK GENMASK(2, 0) + +#define QCOM_USB_PHY_CFG_CTRL_7 (0x74) + +#define QCOM_USB_PHY_CFG_CTRL_8 (0x78) +#define PHY_CFG_TX_FSLS_VREF_TUNE_MASK GENMASK(1, 0) +#define PHY_CFG_TX_FSLS_VREG_BYPASS BIT(2) +#define PHY_CFG_TX_HS_VREF_TUNE_MASK GENMASK(5, 3) +#define PHY_CFG_TX_HS_XV_TUNE_MASK GENMASK(7, 6) + +#define QCOM_USB_PHY_CFG_CTRL_9 (0x7c) +#define PHY_CFG_TX_PREEMP_TUNE_MASK GENMASK(2, 0) +#define PHY_CFG_TX_RES_TUNE_MASK GENMASK(4, 3) +#define PHY_CFG_TX_RISE_TUNE_MASK GENMASK(6, 5) +#define PHY_CFG_RCAL_BYPASS BIT(7) + +#define QCOM_USB_PHY_CFG_CTRL_10 (0x80) + +#define QCOM_USB_PHY_CFG0 (0x94) +#define DATAPATH_CTRL_OVERRIDE_EN BIT(0) +#define CMN_CTRL_OVERRIDE_EN BIT(1) + +#define QCOM_UTMI_PHY_CMN_CTRL0 (0x98) +#define TESTBURNIN BIT(6) + +#define QCOM_USB_PHY_FSEL_SEL (0xb8) +#define FSEL_SEL BIT(0) + +#define QCOM_USB_PHY_APB_ACCESS_CMD (0x130) +#define RW_ACCESS BIT(0) +#define APB_START_CMD BIT(1) +#define APB_LOGIC_RESET BIT(2) + +#define QCOM_USB_PHY_APB_ACCESS_STATUS (0x134) +#define ACCESS_DONE BIT(0) +#define TIMED_OUT BIT(1) +#define ACCESS_ERROR BIT(2) +#define ACCESS_IN_PROGRESS BIT(3) + +#define QCOM_USB_PHY_APB_ADDRESS (0x138) +#define APB_REG_ADDR_MASK GENMASK(7, 0) + +#define QCOM_USB_PHY_APB_WRDATA_LSB (0x13c) +#define APB_REG_WRDATA_7_0_MASK GENMASK(3, 0) + +#define QCOM_USB_PHY_APB_WRDATA_MSB (0x140) +#define APB_REG_WRDATA_15_8_MASK GENMASK(7, 4) + +#define QCOM_USB_PHY_APB_RDDATA_LSB (0x144) +#define APB_REG_RDDATA_7_0_MASK GENMASK(3, 0) + +#define QCOM_USB_PHY_APB_RDDATA_MSB (0x148) +#define APB_REG_RDDATA_15_8_MASK GENMASK(7, 4) + +static const char * const eusb2_hsphy_vreg_names[] = { + "vdd", "vdda12", +}; + +#define EUSB2_NUM_VREGS ARRAY_SIZE(eusb2_hsphy_vreg_names) + +struct snps_eusb2_phy_drvdata { + int (*phy_init)(struct phy *p); + const char * const *clk_names; + int num_clks; +}; + +struct snps_eusb2_hsphy { + struct phy *phy; + void __iomem *base; + + struct clk *ref_clk; + struct clk_bulk_data *clks; + struct reset_control *phy_reset; + + struct regulator_bulk_data vregs[EUSB2_NUM_VREGS]; + + enum phy_mode mode; + + struct phy *repeater; + + const struct snps_eusb2_phy_drvdata *data; +}; + +static int snps_eusb2_hsphy_set_mode(struct phy *p, enum phy_mode mode, int submode) +{ + struct snps_eusb2_hsphy *phy = phy_get_drvdata(p); + + phy->mode = mode; + + return phy_set_mode_ext(phy->repeater, mode, submode); +} + +static void snps_eusb2_hsphy_write_mask(void __iomem *base, u32 offset, + u32 mask, u32 val) +{ + u32 reg; + + reg = readl_relaxed(base + offset); + reg &= ~mask; + reg |= val & mask; + writel_relaxed(reg, base + offset); + + /* Ensure above write is completed */ + readl_relaxed(base + offset); +} + +static void qcom_eusb2_default_parameters(struct snps_eusb2_hsphy *phy) +{ + /* default parameters: tx pre-emphasis */ + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_9, + PHY_CFG_TX_PREEMP_TUNE_MASK, + FIELD_PREP(PHY_CFG_TX_PREEMP_TUNE_MASK, 0)); + + /* tx rise/fall time */ + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_9, + PHY_CFG_TX_RISE_TUNE_MASK, + FIELD_PREP(PHY_CFG_TX_RISE_TUNE_MASK, 0x2)); + + /* source impedance adjustment */ + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_9, + PHY_CFG_TX_RES_TUNE_MASK, + FIELD_PREP(PHY_CFG_TX_RES_TUNE_MASK, 0x1)); + + /* dc voltage level adjustement */ + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_8, + PHY_CFG_TX_HS_VREF_TUNE_MASK, + FIELD_PREP(PHY_CFG_TX_HS_VREF_TUNE_MASK, 0x3)); + + /* transmitter HS crossover adjustement */ + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_8, + PHY_CFG_TX_HS_XV_TUNE_MASK, + FIELD_PREP(PHY_CFG_TX_HS_XV_TUNE_MASK, 0x0)); +} + +struct snps_eusb2_ref_clk { + unsigned long freq; + u32 fsel_val; + u32 div_7_0_val; + u32 div_11_8_val; +}; + +static const struct snps_eusb2_ref_clk exynos_eusb2_ref_clk[] = { + { 19200000, FSEL_19_2_MHZ_VAL, DIV_19_8_19_2_MHZ_VAL, EXYNOS_DIV_11_8_19_2_MHZ_VAL }, + { 20000000, FSEL_20_MHZ_VAL, DIV_19_8_20_MHZ_VAL, EXYNOS_DIV_11_8_20_MHZ_VAL }, + { 24000000, FSEL_24_MHZ_VAL, DIV_19_8_24_MHZ_VAL, EXYNOS_DIV_11_8_24_MHZ_VAL }, + { 26000000, FSEL_26_MHZ_VAL, DIV_19_8_26_MHZ_VAL, EXYNOS_DIV_11_8_26_MHZ_VAL }, + { 48000000, FSEL_48_MHZ_VAL, DIV_19_8_48_MHZ_VAL, EXYNOS_DIV_11_8_48_MHZ_VAL }, +}; + +static int exynos_eusb2_ref_clk_init(struct snps_eusb2_hsphy *phy) +{ + const struct snps_eusb2_ref_clk *config = NULL; + unsigned long ref_clk_freq = clk_get_rate(phy->ref_clk); + + for (int i = 0; i < ARRAY_SIZE(exynos_eusb2_ref_clk); i++) { + if (exynos_eusb2_ref_clk[i].freq == ref_clk_freq) { + config = &exynos_eusb2_ref_clk[i]; + break; + } + } + + if (!config) { + dev_err(&phy->phy->dev, "unsupported ref_clk_freq:%lu\n", ref_clk_freq); + return -EINVAL; + } + + snps_eusb2_hsphy_write_mask(phy->base, EXYNOS_USB_PHY_HS_PHY_CTRL_COMMON, + FSEL_MASK, + FIELD_PREP(FSEL_MASK, config->fsel_val)); + + snps_eusb2_hsphy_write_mask(phy->base, EXYNOS_USB_PHY_CFG_PLLCFG0, + PHY_CFG_PLL_FB_DIV_19_8_MASK, + FIELD_PREP(PHY_CFG_PLL_FB_DIV_19_8_MASK, + config->div_7_0_val)); + + snps_eusb2_hsphy_write_mask(phy->base, EXYNOS_USB_PHY_CFG_PLLCFG1, + EXYNOS_PHY_CFG_PLL_FB_DIV_11_8_MASK, + config->div_11_8_val); + return 0; +} + +static const struct snps_eusb2_ref_clk qcom_eusb2_ref_clk[] = { + { 19200000, FSEL_19_2_MHZ_VAL, DIV_7_0_19_2_MHZ_VAL, DIV_11_8_19_2_MHZ_VAL }, + { 38400000, FSEL_38_4_MHZ_VAL, DIV_7_0_38_4_MHZ_VAL, DIV_11_8_38_4_MHZ_VAL }, +}; + +static int qcom_eusb2_ref_clk_init(struct snps_eusb2_hsphy *phy) +{ + const struct snps_eusb2_ref_clk *config = NULL; + unsigned long ref_clk_freq = clk_get_rate(phy->ref_clk); + + for (int i = 0; i < ARRAY_SIZE(qcom_eusb2_ref_clk); i++) { + if (qcom_eusb2_ref_clk[i].freq == ref_clk_freq) { + config = &qcom_eusb2_ref_clk[i]; + break; + } + } + + if (!config) { + dev_err(&phy->phy->dev, "unsupported ref_clk_freq:%lu\n", ref_clk_freq); + return -EINVAL; + } + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_HS_PHY_CTRL_COMMON0, + FSEL_MASK, + FIELD_PREP(FSEL_MASK, config->fsel_val)); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_2, + PHY_CFG_PLL_FB_DIV_7_0_MASK, + config->div_7_0_val); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_3, + PHY_CFG_PLL_FB_DIV_11_8_MASK, + config->div_11_8_val); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_3, + PHY_CFG_PLL_REF_DIV, PLL_REF_DIV_VAL); + + return 0; +} + +static int exynos_snps_eusb2_hsphy_init(struct phy *p) +{ + struct snps_eusb2_hsphy *phy = phy_get_drvdata(p); + int ret; + + snps_eusb2_hsphy_write_mask(phy->base, EXYNOS_USB_PHY_HS_PHY_CTRL_RST, + USB_PHY_RST_MASK | UTMI_PORT_RST_MASK, + USB_PHY_RST_MASK | UTMI_PORT_RST_MASK); + fsleep(50); /* required after holding phy in reset */ + + snps_eusb2_hsphy_write_mask(phy->base, EXYNOS_USB_PHY_HS_PHY_CTRL_COMMON, + RPTR_MODE, RPTR_MODE); + + /* update ref_clk related registers */ + ret = exynos_eusb2_ref_clk_init(phy); + if (ret) + return ret; + + /* default parameter: tx fsls-vref */ + snps_eusb2_hsphy_write_mask(phy->base, EXYNOS_PHY_CFG_TX, + EXYNOS_PHY_CFG_TX_FSLS_VREF_TUNE_MASK, + FIELD_PREP(EXYNOS_PHY_CFG_TX_FSLS_VREF_TUNE_MASK, 0x0)); + + snps_eusb2_hsphy_write_mask(phy->base, EXYNOS_USB_PHY_UTMI_TESTSE, + TEST_IDDQ, 0); + fsleep(10); /* required after releasing test_iddq */ + + snps_eusb2_hsphy_write_mask(phy->base, EXYNOS_USB_PHY_HS_PHY_CTRL_RST, + USB_PHY_RST_MASK, 0); + + snps_eusb2_hsphy_write_mask(phy->base, EXYNOS_USB_PHY_HS_PHY_CTRL_COMMON, + PHY_ENABLE, PHY_ENABLE); + + snps_eusb2_hsphy_write_mask(phy->base, EXYNOS_USB_PHY_HS_PHY_CTRL_RST, + UTMI_PORT_RST_MASK, 0); + + return 0; +} + +static const char * const exynos_eusb2_hsphy_clock_names[] = { + "ref", "bus", "ctrl", +}; + +static const struct snps_eusb2_phy_drvdata exynos2200_snps_eusb2_phy = { + .phy_init = exynos_snps_eusb2_hsphy_init, + .clk_names = exynos_eusb2_hsphy_clock_names, + .num_clks = ARRAY_SIZE(exynos_eusb2_hsphy_clock_names), +}; + +static int qcom_snps_eusb2_hsphy_init(struct phy *p) +{ + struct snps_eusb2_hsphy *phy = phy_get_drvdata(p); + int ret; + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG0, + CMN_CTRL_OVERRIDE_EN, CMN_CTRL_OVERRIDE_EN); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_UTMI_CTRL5, POR, POR); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_HS_PHY_CTRL_COMMON0, + PHY_ENABLE | RETENABLEN, PHY_ENABLE | RETENABLEN); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_APB_ACCESS_CMD, + APB_LOGIC_RESET, APB_LOGIC_RESET); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_UTMI_PHY_CMN_CTRL0, TESTBURNIN, 0); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_FSEL_SEL, + FSEL_SEL, FSEL_SEL); + + /* update ref_clk related registers */ + ret = qcom_eusb2_ref_clk_init(phy); + if (ret) + return ret; + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_1, + PHY_CFG_PLL_CPBIAS_CNTRL_MASK, + FIELD_PREP(PHY_CFG_PLL_CPBIAS_CNTRL_MASK, 0x1)); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_4, + PHY_CFG_PLL_INT_CNTRL_MASK, + FIELD_PREP(PHY_CFG_PLL_INT_CNTRL_MASK, 0x8)); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_4, + PHY_CFG_PLL_GMP_CNTRL_MASK, + FIELD_PREP(PHY_CFG_PLL_GMP_CNTRL_MASK, 0x1)); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_5, + PHY_CFG_PLL_PROP_CNTRL_MASK, + FIELD_PREP(PHY_CFG_PLL_PROP_CNTRL_MASK, 0x10)); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_6, + PHY_CFG_PLL_VCO_CNTRL_MASK, + FIELD_PREP(PHY_CFG_PLL_VCO_CNTRL_MASK, 0x0)); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_5, + PHY_CFG_PLL_VREF_TUNE_MASK, + FIELD_PREP(PHY_CFG_PLL_VREF_TUNE_MASK, 0x1)); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_HS_PHY_CTRL2, + VBUS_DET_EXT_SEL, VBUS_DET_EXT_SEL); + + /* set default parameters */ + qcom_eusb2_default_parameters(phy); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_UTMI_CTRL0, SLEEPM, SLEEPM); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_HS_PHY_CTRL_COMMON0, + SIDDQ_SEL, SIDDQ_SEL); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_HS_PHY_CTRL_COMMON0, + SIDDQ, 0); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_UTMI_CTRL5, POR, 0); + + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL, 0); + + return 0; +} + +static const char * const qcom_eusb2_hsphy_clock_names[] = { + "ref", +}; + +static const struct snps_eusb2_phy_drvdata sm8550_snps_eusb2_phy = { + .phy_init = qcom_snps_eusb2_hsphy_init, + .clk_names = qcom_eusb2_hsphy_clock_names, + .num_clks = ARRAY_SIZE(qcom_eusb2_hsphy_clock_names), +}; + +static int snps_eusb2_hsphy_init(struct phy *p) +{ + struct snps_eusb2_hsphy *phy = phy_get_drvdata(p); + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(phy->vregs), phy->vregs); + if (ret) + return ret; + + ret = phy_init(phy->repeater); + if (ret) { + dev_err(&p->dev, "repeater init failed. %d\n", ret); + goto disable_vreg; + } + + ret = clk_bulk_prepare_enable(phy->data->num_clks, phy->clks); + if (ret) { + dev_err(&p->dev, "failed to enable ref clock, %d\n", ret); + goto disable_vreg; + } + + ret = reset_control_assert(phy->phy_reset); + if (ret) { + dev_err(&p->dev, "failed to assert phy_reset, %d\n", ret); + goto disable_ref_clk; + } + + usleep_range(100, 150); + + ret = reset_control_deassert(phy->phy_reset); + if (ret) { + dev_err(&p->dev, "failed to de-assert phy_reset, %d\n", ret); + goto disable_ref_clk; + } + + ret = phy->data->phy_init(p); + if (ret) + goto disable_ref_clk; + + return 0; + +disable_ref_clk: + clk_bulk_disable_unprepare(phy->data->num_clks, phy->clks); + +disable_vreg: + regulator_bulk_disable(ARRAY_SIZE(phy->vregs), phy->vregs); + + return ret; +} + +static int snps_eusb2_hsphy_exit(struct phy *p) +{ + struct snps_eusb2_hsphy *phy = phy_get_drvdata(p); + + clk_disable_unprepare(phy->ref_clk); + + regulator_bulk_disable(ARRAY_SIZE(phy->vregs), phy->vregs); + + phy_exit(phy->repeater); + + return 0; +} + +static const struct phy_ops snps_eusb2_hsphy_ops = { + .init = snps_eusb2_hsphy_init, + .exit = snps_eusb2_hsphy_exit, + .set_mode = snps_eusb2_hsphy_set_mode, + .owner = THIS_MODULE, +}; + +static int snps_eusb2_hsphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct snps_eusb2_hsphy *phy; + struct phy_provider *phy_provider; + struct phy *generic_phy; + int ret, i; + int num; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->data = device_get_match_data(dev); + if (!phy->data) + return -EINVAL; + + phy->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->base)) + return PTR_ERR(phy->base); + + phy->phy_reset = devm_reset_control_get_optional_exclusive(dev, NULL); + if (IS_ERR(phy->phy_reset)) + return PTR_ERR(phy->phy_reset); + + phy->clks = devm_kcalloc(dev, phy->data->num_clks, sizeof(*phy->clks), + GFP_KERNEL); + if (!phy->clks) + return -ENOMEM; + + for (int i = 0; i < phy->data->num_clks; ++i) + phy->clks[i].id = phy->data->clk_names[i]; + + ret = devm_clk_bulk_get(dev, phy->data->num_clks, phy->clks); + if (ret) + return dev_err_probe(dev, ret, + "failed to get phy clock(s)\n"); + + phy->ref_clk = NULL; + for (int i = 0; i < phy->data->num_clks; ++i) { + if (!strcmp(phy->clks[i].id, "ref")) { + phy->ref_clk = phy->clks[i].clk; + break; + } + } + + if (IS_ERR_OR_NULL(phy->ref_clk)) + return dev_err_probe(dev, PTR_ERR(phy->ref_clk), + "failed to get ref clk\n"); + + num = ARRAY_SIZE(phy->vregs); + for (i = 0; i < num; i++) + phy->vregs[i].supply = eusb2_hsphy_vreg_names[i]; + + ret = devm_regulator_bulk_get(dev, num, phy->vregs); + if (ret) + return dev_err_probe(dev, ret, + "failed to get regulator supplies\n"); + + phy->repeater = devm_of_phy_optional_get(dev, np, 0); + if (IS_ERR(phy->repeater)) + return dev_err_probe(dev, PTR_ERR(phy->repeater), + "failed to get repeater\n"); + + generic_phy = devm_phy_create(dev, NULL, &snps_eusb2_hsphy_ops); + if (IS_ERR(generic_phy)) { + dev_err(dev, "failed to create phy %d\n", ret); + return PTR_ERR(generic_phy); + } + + dev_set_drvdata(dev, phy); + phy_set_drvdata(generic_phy, phy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + dev_info(dev, "Registered Snps-eUSB2 phy\n"); + + return 0; +} + +static const struct of_device_id snps_eusb2_hsphy_of_match_table[] = { + { + .compatible = "qcom,sm8550-snps-eusb2-phy", + .data = &sm8550_snps_eusb2_phy, + }, { + .compatible = "samsung,exynos2200-eusb2-phy", + .data = &exynos2200_snps_eusb2_phy, + }, { }, +}; +MODULE_DEVICE_TABLE(of, snps_eusb2_hsphy_of_match_table); + +static struct platform_driver snps_eusb2_hsphy_driver = { + .probe = snps_eusb2_hsphy_probe, + .driver = { + .name = "snps-eusb2-hsphy", + .of_match_table = snps_eusb2_hsphy_of_match_table, + }, +}; + +module_platform_driver(snps_eusb2_hsphy_driver); +MODULE_DESCRIPTION("Synopsys eUSB2 HS PHY driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index c1e0a11ddd76c2..ef14f4e33973cf 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -125,15 +125,6 @@ config PHY_QCOM_QUSB2 PHY which is usually paired with either the ChipIdea or Synopsys DWC3 USB IPs on MSM SOCs. -config PHY_QCOM_SNPS_EUSB2 - tristate "Qualcomm SNPS eUSB2 PHY Driver" - depends on OF && (ARCH_QCOM || COMPILE_TEST) - select GENERIC_PHY - help - Enable support for the USB high-speed SNPS eUSB2 phy on Qualcomm - chipsets. The PHY is paired with a Synopsys DWC3 USB controller - on Qualcomm SOCs. - config PHY_QCOM_EUSB2_REPEATER tristate "Qualcomm SNPS eUSB2 Repeater Driver" depends on OF && (ARCH_QCOM || COMPILE_TEST) diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index 42038bc30974a3..3851e28a212d4a 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_PHY_QCOM_QMP_USB) += phy-qcom-qmp-usb.o obj-$(CONFIG_PHY_QCOM_QMP_USB_LEGACY) += phy-qcom-qmp-usb-legacy.o obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o -obj-$(CONFIG_PHY_QCOM_SNPS_EUSB2) += phy-qcom-snps-eusb2.o obj-$(CONFIG_PHY_QCOM_EUSB2_REPEATER) += phy-qcom-eusb2-repeater.o obj-$(CONFIG_PHY_QCOM_UNIPHY_PCIE_28LP) += phy-qcom-uniphy-pcie-28lp.o obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c index c232b8fe9846a5..461b9e0af610a1 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c @@ -3021,8 +3021,6 @@ struct qmp_phy_cfg { bool skip_start_delay; - bool has_nocsr_reset; - /* QMP PHY pipe clock interface rate */ unsigned long pipe_clock_rate; @@ -3035,6 +3033,7 @@ struct qmp_pcie { const struct qmp_phy_cfg *cfg; bool tcsr_4ln_config; + bool skip_init; void __iomem *serdes; void __iomem *pcs; @@ -4020,7 +4019,6 @@ static const struct qmp_phy_cfg sm8550_qmp_gen4x2_pciephy_cfg = { .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS_4_20, - .has_nocsr_reset = true, /* 20MHz PHY AUX Clock */ .aux_clock_rate = 20000000, @@ -4053,7 +4051,6 @@ static const struct qmp_phy_cfg sm8650_qmp_gen4x2_pciephy_cfg = { .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS_4_20, - .has_nocsr_reset = true, /* 20MHz PHY AUX Clock */ .aux_clock_rate = 20000000, @@ -4173,7 +4170,6 @@ static const struct qmp_phy_cfg x1e80100_qmp_gen4x2_pciephy_cfg = { .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS_4_20, - .has_nocsr_reset = true, }; static const struct qmp_phy_cfg x1e80100_qmp_gen4x4_pciephy_cfg = { @@ -4207,7 +4203,6 @@ static const struct qmp_phy_cfg x1e80100_qmp_gen4x4_pciephy_cfg = { .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS_4_20, - .has_nocsr_reset = true, }; static const struct qmp_phy_cfg x1e80100_qmp_gen4x8_pciephy_cfg = { @@ -4233,13 +4228,12 @@ static const struct qmp_phy_cfg x1e80100_qmp_gen4x8_pciephy_cfg = { .reset_list = sdm845_pciephy_reset_l, .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), - .vreg_list = sm8550_qmp_phy_vreg_l, - .num_vregs = ARRAY_SIZE(sm8550_qmp_phy_vreg_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), .regs = pciephy_v6_regs_layout, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS_4_20, - .has_nocsr_reset = true, }; static const struct qmp_phy_cfg qmp_v6_gen4x4_pciephy_cfg = { @@ -4337,18 +4331,38 @@ static int qmp_pcie_init(struct phy *phy) { struct qmp_pcie *qmp = phy_get_drvdata(phy); const struct qmp_phy_cfg *cfg = qmp->cfg; + void __iomem *pcs = qmp->pcs; + bool phy_initialized = !!(readl(pcs + cfg->regs[QPHY_START_CTRL])); int ret; + qmp->skip_init = qmp->nocsr_reset && phy_initialized; + /* + * We need to check the existence of init sequences in two cases: + * 1. The PHY doesn't support no_csr reset. + * 2. The PHY supports no_csr reset but isn't initialized by bootloader. + * As we can't skip init in these two cases. + */ + if (!qmp->skip_init && !cfg->tbls.serdes_num) { + dev_err(qmp->dev, "Init sequence not available\n"); + return -ENODATA; + } + ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs); if (ret) { dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret); return ret; } - ret = reset_control_bulk_assert(cfg->num_resets, qmp->resets); - if (ret) { - dev_err(qmp->dev, "reset assert failed\n"); - goto err_disable_regulators; + /* + * Toggle BCR reset for PHY that doesn't support no_csr reset or has not + * been initialized. + */ + if (!qmp->skip_init) { + ret = reset_control_bulk_assert(cfg->num_resets, qmp->resets); + if (ret) { + dev_err(qmp->dev, "reset assert failed\n"); + goto err_disable_regulators; + } } ret = reset_control_assert(qmp->nocsr_reset); @@ -4359,10 +4373,12 @@ static int qmp_pcie_init(struct phy *phy) usleep_range(200, 300); - ret = reset_control_bulk_deassert(cfg->num_resets, qmp->resets); - if (ret) { - dev_err(qmp->dev, "reset deassert failed\n"); - goto err_assert_reset; + if (!qmp->skip_init) { + ret = reset_control_bulk_deassert(cfg->num_resets, qmp->resets); + if (ret) { + dev_err(qmp->dev, "reset deassert failed\n"); + goto err_assert_reset; + } } ret = clk_bulk_prepare_enable(ARRAY_SIZE(qmp_pciephy_clk_l), qmp->clks); @@ -4372,7 +4388,8 @@ static int qmp_pcie_init(struct phy *phy) return 0; err_assert_reset: - reset_control_bulk_assert(cfg->num_resets, qmp->resets); + if (!qmp->skip_init) + reset_control_bulk_assert(cfg->num_resets, qmp->resets); err_disable_regulators: regulator_bulk_disable(cfg->num_vregs, qmp->vregs); @@ -4384,7 +4401,10 @@ static int qmp_pcie_exit(struct phy *phy) struct qmp_pcie *qmp = phy_get_drvdata(phy); const struct qmp_phy_cfg *cfg = qmp->cfg; - reset_control_bulk_assert(cfg->num_resets, qmp->resets); + if (qmp->nocsr_reset) + reset_control_assert(qmp->nocsr_reset); + else + reset_control_bulk_assert(cfg->num_resets, qmp->resets); clk_bulk_disable_unprepare(ARRAY_SIZE(qmp_pciephy_clk_l), qmp->clks); @@ -4403,6 +4423,13 @@ static int qmp_pcie_power_on(struct phy *phy) unsigned int mask, val; int ret; + /* + * Write CSR register for PHY that doesn't support no_csr reset or has not + * been initialized. + */ + if (qmp->skip_init) + goto skip_tbls_init; + qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], cfg->pwrdn_ctrl); @@ -4414,6 +4441,7 @@ static int qmp_pcie_power_on(struct phy *phy) qmp_pcie_init_registers(qmp, &cfg->tbls); qmp_pcie_init_registers(qmp, mode_tbls); +skip_tbls_init: ret = clk_bulk_prepare_enable(qmp->num_pipe_clks, qmp->pipe_clks); if (ret) return ret; @@ -4424,6 +4452,9 @@ static int qmp_pcie_power_on(struct phy *phy) goto err_disable_pipe_clk; } + if (qmp->skip_init) + goto skip_serdes_start; + /* Pull PHY out of reset state */ qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); @@ -4433,6 +4464,7 @@ static int qmp_pcie_power_on(struct phy *phy) if (!cfg->skip_start_delay) usleep_range(1000, 1200); +skip_serdes_start: status = pcs + cfg->regs[QPHY_PCS_STATUS]; mask = cfg->phy_status; ret = readl_poll_timeout(status, val, !(val & mask), 200, @@ -4457,6 +4489,15 @@ static int qmp_pcie_power_off(struct phy *phy) clk_bulk_disable_unprepare(qmp->num_pipe_clks, qmp->pipe_clks); + /* + * While powering off the PHY, only qmp->nocsr_reset needs to be checked. In + * this way, no matter whether the PHY settings were initially programmed by + * bootloader or PHY driver itself, we can reuse them when PHY is powered on + * next time. + */ + if (qmp->nocsr_reset) + goto skip_phy_deinit; + /* PHY reset */ qphy_setbits(qmp->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); @@ -4468,6 +4509,7 @@ static int qmp_pcie_power_off(struct phy *phy) qphy_clrbits(qmp->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], cfg->pwrdn_ctrl); +skip_phy_deinit: return 0; } @@ -4557,12 +4599,10 @@ static int qmp_pcie_reset_init(struct qmp_pcie *qmp) if (ret) return dev_err_probe(dev, ret, "failed to get resets\n"); - if (cfg->has_nocsr_reset) { - qmp->nocsr_reset = devm_reset_control_get_exclusive(dev, "phy_nocsr"); - if (IS_ERR(qmp->nocsr_reset)) - return dev_err_probe(dev, PTR_ERR(qmp->nocsr_reset), - "failed to get no-csr reset\n"); - } + qmp->nocsr_reset = devm_reset_control_get_optional_exclusive(dev, "phy_nocsr"); + if (IS_ERR(qmp->nocsr_reset)) + return dev_err_probe(dev, PTR_ERR(qmp->nocsr_reset), + "failed to get no-csr reset\n"); return 0; } diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c index 78772157045752..ed646a7e705ba3 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c @@ -2106,12 +2106,16 @@ static void __iomem *qmp_usb_iomap(struct device *dev, struct device_node *np, int index, bool exclusive) { struct resource res; + void __iomem *mem; if (!exclusive) { if (of_address_to_resource(np, index, &res)) return IOMEM_ERR_PTR(-EINVAL); - return devm_ioremap(dev, res.start, resource_size(&res)); + mem = devm_ioremap(dev, res.start, resource_size(&res)); + if (!mem) + return IOMEM_ERR_PTR(-ENOMEM); + return mem; } return devm_of_iomap(dev, np, index, NULL); diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c index 1f5f7df14d5a2f..49c37c53b38e70 100644 --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c @@ -151,21 +151,6 @@ static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = { QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F), }; -static const struct qusb2_phy_init_tbl ipq5424_init_tbl[] = { - QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14), - QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x00), - QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53), - QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xc3), - QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30), - QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79), - QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21), - QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00), - QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00), - QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14), - QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80), - QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f), -}; - static const struct qusb2_phy_init_tbl qcs615_init_tbl[] = { QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xc8), QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xb3), @@ -359,16 +344,6 @@ static const struct qusb2_phy_cfg ipq6018_phy_cfg = { .autoresume_en = BIT(0), }; -static const struct qusb2_phy_cfg ipq5424_phy_cfg = { - .tbl = ipq5424_init_tbl, - .tbl_num = ARRAY_SIZE(ipq5424_init_tbl), - .regs = ipq6018_regs_layout, - - .disable_ctrl = POWER_DOWN, - .mask_core_ready = PLL_LOCKED, - .autoresume_en = BIT(0), -}; - static const struct qusb2_phy_cfg qcs615_phy_cfg = { .tbl = qcs615_init_tbl, .tbl_num = ARRAY_SIZE(qcs615_init_tbl), @@ -955,7 +930,7 @@ static const struct phy_ops qusb2_phy_gen_ops = { static const struct of_device_id qusb2_phy_of_match_table[] = { { .compatible = "qcom,ipq5424-qusb2-phy", - .data = &ipq5424_phy_cfg, + .data = &ipq6018_phy_cfg, }, { .compatible = "qcom,ipq6018-qusb2-phy", .data = &ipq6018_phy_cfg, diff --git a/drivers/phy/qualcomm/phy-qcom-snps-eusb2.c b/drivers/phy/qualcomm/phy-qcom-snps-eusb2.c deleted file mode 100644 index 1484691a41d59a..00000000000000 --- a/drivers/phy/qualcomm/phy-qcom-snps-eusb2.c +++ /dev/null @@ -1,442 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2023, Linaro Limited - */ - -#include <linux/bitfield.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/iopoll.h> -#include <linux/mod_devicetable.h> -#include <linux/phy/phy.h> -#include <linux/platform_device.h> -#include <linux/regulator/consumer.h> -#include <linux/reset.h> - -#define USB_PHY_UTMI_CTRL0 (0x3c) -#define SLEEPM BIT(0) -#define OPMODE_MASK GENMASK(4, 3) -#define OPMODE_NONDRIVING BIT(3) - -#define USB_PHY_UTMI_CTRL5 (0x50) -#define POR BIT(1) - -#define USB_PHY_HS_PHY_CTRL_COMMON0 (0x54) -#define PHY_ENABLE BIT(0) -#define SIDDQ_SEL BIT(1) -#define SIDDQ BIT(2) -#define RETENABLEN BIT(3) -#define FSEL_MASK GENMASK(6, 4) -#define FSEL_19_2_MHZ_VAL (0x0) -#define FSEL_38_4_MHZ_VAL (0x4) - -#define USB_PHY_CFG_CTRL_1 (0x58) -#define PHY_CFG_PLL_CPBIAS_CNTRL_MASK GENMASK(7, 1) - -#define USB_PHY_CFG_CTRL_2 (0x5c) -#define PHY_CFG_PLL_FB_DIV_7_0_MASK GENMASK(7, 0) -#define DIV_7_0_19_2_MHZ_VAL (0x90) -#define DIV_7_0_38_4_MHZ_VAL (0xc8) - -#define USB_PHY_CFG_CTRL_3 (0x60) -#define PHY_CFG_PLL_FB_DIV_11_8_MASK GENMASK(3, 0) -#define DIV_11_8_19_2_MHZ_VAL (0x1) -#define DIV_11_8_38_4_MHZ_VAL (0x0) - -#define PHY_CFG_PLL_REF_DIV GENMASK(7, 4) -#define PLL_REF_DIV_VAL (0x0) - -#define USB_PHY_HS_PHY_CTRL2 (0x64) -#define VBUSVLDEXT0 BIT(0) -#define USB2_SUSPEND_N BIT(2) -#define USB2_SUSPEND_N_SEL BIT(3) -#define VBUS_DET_EXT_SEL BIT(4) - -#define USB_PHY_CFG_CTRL_4 (0x68) -#define PHY_CFG_PLL_GMP_CNTRL_MASK GENMASK(1, 0) -#define PHY_CFG_PLL_INT_CNTRL_MASK GENMASK(7, 2) - -#define USB_PHY_CFG_CTRL_5 (0x6c) -#define PHY_CFG_PLL_PROP_CNTRL_MASK GENMASK(4, 0) -#define PHY_CFG_PLL_VREF_TUNE_MASK GENMASK(7, 6) - -#define USB_PHY_CFG_CTRL_6 (0x70) -#define PHY_CFG_PLL_VCO_CNTRL_MASK GENMASK(2, 0) - -#define USB_PHY_CFG_CTRL_7 (0x74) - -#define USB_PHY_CFG_CTRL_8 (0x78) -#define PHY_CFG_TX_FSLS_VREF_TUNE_MASK GENMASK(1, 0) -#define PHY_CFG_TX_FSLS_VREG_BYPASS BIT(2) -#define PHY_CFG_TX_HS_VREF_TUNE_MASK GENMASK(5, 3) -#define PHY_CFG_TX_HS_XV_TUNE_MASK GENMASK(7, 6) - -#define USB_PHY_CFG_CTRL_9 (0x7c) -#define PHY_CFG_TX_PREEMP_TUNE_MASK GENMASK(2, 0) -#define PHY_CFG_TX_RES_TUNE_MASK GENMASK(4, 3) -#define PHY_CFG_TX_RISE_TUNE_MASK GENMASK(6, 5) -#define PHY_CFG_RCAL_BYPASS BIT(7) - -#define USB_PHY_CFG_CTRL_10 (0x80) - -#define USB_PHY_CFG0 (0x94) -#define DATAPATH_CTRL_OVERRIDE_EN BIT(0) -#define CMN_CTRL_OVERRIDE_EN BIT(1) - -#define UTMI_PHY_CMN_CTRL0 (0x98) -#define TESTBURNIN BIT(6) - -#define USB_PHY_FSEL_SEL (0xb8) -#define FSEL_SEL BIT(0) - -#define USB_PHY_APB_ACCESS_CMD (0x130) -#define RW_ACCESS BIT(0) -#define APB_START_CMD BIT(1) -#define APB_LOGIC_RESET BIT(2) - -#define USB_PHY_APB_ACCESS_STATUS (0x134) -#define ACCESS_DONE BIT(0) -#define TIMED_OUT BIT(1) -#define ACCESS_ERROR BIT(2) -#define ACCESS_IN_PROGRESS BIT(3) - -#define USB_PHY_APB_ADDRESS (0x138) -#define APB_REG_ADDR_MASK GENMASK(7, 0) - -#define USB_PHY_APB_WRDATA_LSB (0x13c) -#define APB_REG_WRDATA_7_0_MASK GENMASK(3, 0) - -#define USB_PHY_APB_WRDATA_MSB (0x140) -#define APB_REG_WRDATA_15_8_MASK GENMASK(7, 4) - -#define USB_PHY_APB_RDDATA_LSB (0x144) -#define APB_REG_RDDATA_7_0_MASK GENMASK(3, 0) - -#define USB_PHY_APB_RDDATA_MSB (0x148) -#define APB_REG_RDDATA_15_8_MASK GENMASK(7, 4) - -static const char * const eusb2_hsphy_vreg_names[] = { - "vdd", "vdda12", -}; - -#define EUSB2_NUM_VREGS ARRAY_SIZE(eusb2_hsphy_vreg_names) - -struct qcom_snps_eusb2_hsphy { - struct phy *phy; - void __iomem *base; - - struct clk *ref_clk; - struct reset_control *phy_reset; - - struct regulator_bulk_data vregs[EUSB2_NUM_VREGS]; - - enum phy_mode mode; - - struct phy *repeater; -}; - -static int qcom_snps_eusb2_hsphy_set_mode(struct phy *p, enum phy_mode mode, int submode) -{ - struct qcom_snps_eusb2_hsphy *phy = phy_get_drvdata(p); - - phy->mode = mode; - - return phy_set_mode_ext(phy->repeater, mode, submode); -} - -static void qcom_snps_eusb2_hsphy_write_mask(void __iomem *base, u32 offset, - u32 mask, u32 val) -{ - u32 reg; - - reg = readl_relaxed(base + offset); - reg &= ~mask; - reg |= val & mask; - writel_relaxed(reg, base + offset); - - /* Ensure above write is completed */ - readl_relaxed(base + offset); -} - -static void qcom_eusb2_default_parameters(struct qcom_snps_eusb2_hsphy *phy) -{ - /* default parameters: tx pre-emphasis */ - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_9, - PHY_CFG_TX_PREEMP_TUNE_MASK, - FIELD_PREP(PHY_CFG_TX_PREEMP_TUNE_MASK, 0)); - - /* tx rise/fall time */ - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_9, - PHY_CFG_TX_RISE_TUNE_MASK, - FIELD_PREP(PHY_CFG_TX_RISE_TUNE_MASK, 0x2)); - - /* source impedance adjustment */ - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_9, - PHY_CFG_TX_RES_TUNE_MASK, - FIELD_PREP(PHY_CFG_TX_RES_TUNE_MASK, 0x1)); - - /* dc voltage level adjustement */ - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_8, - PHY_CFG_TX_HS_VREF_TUNE_MASK, - FIELD_PREP(PHY_CFG_TX_HS_VREF_TUNE_MASK, 0x3)); - - /* transmitter HS crossover adjustement */ - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_8, - PHY_CFG_TX_HS_XV_TUNE_MASK, - FIELD_PREP(PHY_CFG_TX_HS_XV_TUNE_MASK, 0x0)); -} - -static int qcom_eusb2_ref_clk_init(struct qcom_snps_eusb2_hsphy *phy) -{ - unsigned long ref_clk_freq = clk_get_rate(phy->ref_clk); - - switch (ref_clk_freq) { - case 19200000: - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, - FSEL_MASK, - FIELD_PREP(FSEL_MASK, FSEL_19_2_MHZ_VAL)); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_2, - PHY_CFG_PLL_FB_DIV_7_0_MASK, - DIV_7_0_19_2_MHZ_VAL); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_3, - PHY_CFG_PLL_FB_DIV_11_8_MASK, - DIV_11_8_19_2_MHZ_VAL); - break; - - case 38400000: - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, - FSEL_MASK, - FIELD_PREP(FSEL_MASK, FSEL_38_4_MHZ_VAL)); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_2, - PHY_CFG_PLL_FB_DIV_7_0_MASK, - DIV_7_0_38_4_MHZ_VAL); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_3, - PHY_CFG_PLL_FB_DIV_11_8_MASK, - DIV_11_8_38_4_MHZ_VAL); - break; - - default: - dev_err(&phy->phy->dev, "unsupported ref_clk_freq:%lu\n", ref_clk_freq); - return -EINVAL; - } - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_3, - PHY_CFG_PLL_REF_DIV, PLL_REF_DIV_VAL); - - return 0; -} - -static int qcom_snps_eusb2_hsphy_init(struct phy *p) -{ - struct qcom_snps_eusb2_hsphy *phy = phy_get_drvdata(p); - int ret; - - ret = regulator_bulk_enable(ARRAY_SIZE(phy->vregs), phy->vregs); - if (ret) - return ret; - - ret = phy_init(phy->repeater); - if (ret) { - dev_err(&p->dev, "repeater init failed. %d\n", ret); - goto disable_vreg; - } - - ret = clk_prepare_enable(phy->ref_clk); - if (ret) { - dev_err(&p->dev, "failed to enable ref clock, %d\n", ret); - goto disable_vreg; - } - - ret = reset_control_assert(phy->phy_reset); - if (ret) { - dev_err(&p->dev, "failed to assert phy_reset, %d\n", ret); - goto disable_ref_clk; - } - - usleep_range(100, 150); - - ret = reset_control_deassert(phy->phy_reset); - if (ret) { - dev_err(&p->dev, "failed to de-assert phy_reset, %d\n", ret); - goto disable_ref_clk; - } - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG0, - CMN_CTRL_OVERRIDE_EN, CMN_CTRL_OVERRIDE_EN); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_UTMI_CTRL5, POR, POR); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, - PHY_ENABLE | RETENABLEN, PHY_ENABLE | RETENABLEN); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_APB_ACCESS_CMD, - APB_LOGIC_RESET, APB_LOGIC_RESET); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, UTMI_PHY_CMN_CTRL0, TESTBURNIN, 0); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_FSEL_SEL, - FSEL_SEL, FSEL_SEL); - - /* update ref_clk related registers */ - ret = qcom_eusb2_ref_clk_init(phy); - if (ret) - goto disable_ref_clk; - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_1, - PHY_CFG_PLL_CPBIAS_CNTRL_MASK, - FIELD_PREP(PHY_CFG_PLL_CPBIAS_CNTRL_MASK, 0x1)); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_4, - PHY_CFG_PLL_INT_CNTRL_MASK, - FIELD_PREP(PHY_CFG_PLL_INT_CNTRL_MASK, 0x8)); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_4, - PHY_CFG_PLL_GMP_CNTRL_MASK, - FIELD_PREP(PHY_CFG_PLL_GMP_CNTRL_MASK, 0x1)); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_5, - PHY_CFG_PLL_PROP_CNTRL_MASK, - FIELD_PREP(PHY_CFG_PLL_PROP_CNTRL_MASK, 0x10)); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_6, - PHY_CFG_PLL_VCO_CNTRL_MASK, - FIELD_PREP(PHY_CFG_PLL_VCO_CNTRL_MASK, 0x0)); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_5, - PHY_CFG_PLL_VREF_TUNE_MASK, - FIELD_PREP(PHY_CFG_PLL_VREF_TUNE_MASK, 0x1)); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL2, - VBUS_DET_EXT_SEL, VBUS_DET_EXT_SEL); - - /* set default parameters */ - qcom_eusb2_default_parameters(phy); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL2, - USB2_SUSPEND_N_SEL | USB2_SUSPEND_N, - USB2_SUSPEND_N_SEL | USB2_SUSPEND_N); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_UTMI_CTRL0, SLEEPM, SLEEPM); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, - SIDDQ_SEL, SIDDQ_SEL); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, - SIDDQ, 0); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_UTMI_CTRL5, POR, 0); - - qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL2, - USB2_SUSPEND_N_SEL, 0); - - return 0; - -disable_ref_clk: - clk_disable_unprepare(phy->ref_clk); - -disable_vreg: - regulator_bulk_disable(ARRAY_SIZE(phy->vregs), phy->vregs); - - return ret; -} - -static int qcom_snps_eusb2_hsphy_exit(struct phy *p) -{ - struct qcom_snps_eusb2_hsphy *phy = phy_get_drvdata(p); - - clk_disable_unprepare(phy->ref_clk); - - regulator_bulk_disable(ARRAY_SIZE(phy->vregs), phy->vregs); - - phy_exit(phy->repeater); - - return 0; -} - -static const struct phy_ops qcom_snps_eusb2_hsphy_ops = { - .init = qcom_snps_eusb2_hsphy_init, - .exit = qcom_snps_eusb2_hsphy_exit, - .set_mode = qcom_snps_eusb2_hsphy_set_mode, - .owner = THIS_MODULE, -}; - -static int qcom_snps_eusb2_hsphy_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; - struct qcom_snps_eusb2_hsphy *phy; - struct phy_provider *phy_provider; - struct phy *generic_phy; - int ret, i; - int num; - - phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); - if (!phy) - return -ENOMEM; - - phy->base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(phy->base)) - return PTR_ERR(phy->base); - - phy->phy_reset = devm_reset_control_get_exclusive(dev, NULL); - if (IS_ERR(phy->phy_reset)) - return PTR_ERR(phy->phy_reset); - - phy->ref_clk = devm_clk_get(dev, "ref"); - if (IS_ERR(phy->ref_clk)) - return dev_err_probe(dev, PTR_ERR(phy->ref_clk), - "failed to get ref clk\n"); - - num = ARRAY_SIZE(phy->vregs); - for (i = 0; i < num; i++) - phy->vregs[i].supply = eusb2_hsphy_vreg_names[i]; - - ret = devm_regulator_bulk_get(dev, num, phy->vregs); - if (ret) - return dev_err_probe(dev, ret, - "failed to get regulator supplies\n"); - - phy->repeater = devm_of_phy_get_by_index(dev, np, 0); - if (IS_ERR(phy->repeater)) - return dev_err_probe(dev, PTR_ERR(phy->repeater), - "failed to get repeater\n"); - - generic_phy = devm_phy_create(dev, NULL, &qcom_snps_eusb2_hsphy_ops); - if (IS_ERR(generic_phy)) { - dev_err(dev, "failed to create phy %d\n", ret); - return PTR_ERR(generic_phy); - } - - dev_set_drvdata(dev, phy); - phy_set_drvdata(generic_phy, phy); - - phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); - if (IS_ERR(phy_provider)) - return PTR_ERR(phy_provider); - - dev_info(dev, "Registered Qcom-eUSB2 phy\n"); - - return 0; -} - -static const struct of_device_id qcom_snps_eusb2_hsphy_of_match_table[] = { - { .compatible = "qcom,sm8550-snps-eusb2-phy", }, - { }, -}; -MODULE_DEVICE_TABLE(of, qcom_snps_eusb2_hsphy_of_match_table); - -static struct platform_driver qcom_snps_eusb2_hsphy_driver = { - .probe = qcom_snps_eusb2_hsphy_probe, - .driver = { - .name = "qcom-snps-eusb2-hsphy", - .of_match_table = qcom_snps_eusb2_hsphy_of_match_table, - }, -}; - -module_platform_driver(qcom_snps_eusb2_hsphy_driver); -MODULE_DESCRIPTION("Qualcomm SNPS eUSB2 HS PHY driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c index c8b2a3818880ea..324c0a5d658e43 100644 --- a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c +++ b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c @@ -75,6 +75,40 @@ struct qcom_uniphy_pcie { #define phy_to_dw_phy(x) container_of((x), struct qca_uni_pcie_phy, phy) +static const struct qcom_uniphy_pcie_regs ipq5018_regs[] = { + { + .offset = SSCG_CTRL_REG_4, + .val = 0x1cb9, + }, { + .offset = SSCG_CTRL_REG_5, + .val = 0x023a, + }, { + .offset = SSCG_CTRL_REG_3, + .val = 0xd360, + }, { + .offset = SSCG_CTRL_REG_1, + .val = 0x1, + }, { + .offset = SSCG_CTRL_REG_2, + .val = 0xeb, + }, { + .offset = CDR_CTRL_REG_4, + .val = 0x3f9, + }, { + .offset = CDR_CTRL_REG_5, + .val = 0x1c9, + }, { + .offset = CDR_CTRL_REG_2, + .val = 0x419, + }, { + .offset = CDR_CTRL_REG_1, + .val = 0x200, + }, { + .offset = PCS_INTERNAL_CONTROL_2, + .val = 0xf101, + }, +}; + static const struct qcom_uniphy_pcie_regs ipq5332_regs[] = { { .offset = PHY_CFG_PLLCFG, @@ -88,6 +122,14 @@ static const struct qcom_uniphy_pcie_regs ipq5332_regs[] = { }, }; +static const struct qcom_uniphy_pcie_data ipq5018_data = { + .lane_offset = 0x800, + .phy_type = PHY_TYPE_PCIE_GEN2, + .init_seq = ipq5018_regs, + .init_seq_num = ARRAY_SIZE(ipq5018_regs), + .pipe_clk_rate = 125 * MEGA, +}; + static const struct qcom_uniphy_pcie_data ipq5332_data = { .lane_offset = 0x800, .phy_type = PHY_TYPE_PCIE_GEN3, @@ -212,6 +254,9 @@ static inline int phy_pipe_clk_register(struct qcom_uniphy_pcie *phy, int id) static const struct of_device_id qcom_uniphy_pcie_id_table[] = { { + .compatible = "qcom,ipq5018-uniphy-pcie-phy", + .data = &ipq5018_data, + }, { .compatible = "qcom,ipq5332-uniphy-pcie-phy", .data = &ipq5332_data, }, { diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 9fdf17e0848a28..47beb94cd4244c 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -29,8 +29,10 @@ #define USB2_INT_ENABLE 0x000 #define USB2_AHB_BUS_CTR 0x008 #define USB2_USBCTR 0x00c +#define USB2_REGEN_CG_CTRL 0x104 /* RZ/V2H(P) only */ #define USB2_SPD_RSM_TIMSET 0x10c #define USB2_OC_TIMSET 0x110 +#define USB2_UTMI_CTRL 0x118 /* RZ/V2H(P) only */ #define USB2_COMMCTRL 0x600 #define USB2_OBINTSTA 0x604 #define USB2_OBINTEN 0x608 @@ -51,12 +53,18 @@ #define USB2_USBCTR_DIRPD BIT(2) #define USB2_USBCTR_PLL_RST BIT(1) +/* REGEN_CG_CTRL*/ +#define USB2_REGEN_CG_CTRL_UPHY_WEN BIT(0) + /* SPD_RSM_TIMSET */ #define USB2_SPD_RSM_TIMSET_INIT 0x014e029b /* OC_TIMSET */ #define USB2_OC_TIMSET_INIT 0x000209ab +/* UTMI_CTRL */ +#define USB2_UTMI_CTRL_INIT 0x8000018f + /* COMMCTRL */ #define USB2_COMMCTRL_OTG_PERI BIT(31) /* 1 = Peripheral mode */ @@ -126,12 +134,14 @@ struct rcar_gen3_chan { bool is_otg_channel; bool uses_otg_pins; bool soc_no_adp_ctrl; + bool utmi_ctrl; }; struct rcar_gen3_phy_drv_data { const struct phy_ops *phy_usb2_ops; bool no_adp_ctrl; bool init_bus; + bool utmi_ctrl; }; /* @@ -477,6 +487,14 @@ static int rcar_gen3_phy_usb2_init(struct phy *p) if (rphy->int_enable_bits) rcar_gen3_init_otg(channel); + if (channel->utmi_ctrl) { + val = readl(usb2_base + USB2_REGEN_CG_CTRL) | USB2_REGEN_CG_CTRL_UPHY_WEN; + writel(val, usb2_base + USB2_REGEN_CG_CTRL); + + writel(USB2_UTMI_CTRL_INIT, usb2_base + USB2_UTMI_CTRL); + writel(val & ~USB2_REGEN_CG_CTRL_UPHY_WEN, usb2_base + USB2_REGEN_CG_CTRL); + } + rphy->initialized = true; return 0; @@ -592,6 +610,12 @@ static const struct rcar_gen3_phy_drv_data rz_g3s_phy_usb2_data = { .init_bus = true, }; +static const struct rcar_gen3_phy_drv_data rz_v2h_phy_usb2_data = { + .phy_usb2_ops = &rcar_gen3_phy_usb2_ops, + .no_adp_ctrl = true, + .utmi_ctrl = true, +}; + static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = { { .compatible = "renesas,usb2-phy-r8a77470", @@ -610,14 +634,18 @@ static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = { .data = &rcar_gen3_phy_usb2_data, }, { - .compatible = "renesas,rzg2l-usb2-phy", - .data = &rz_g2l_phy_usb2_data, - }, - { .compatible = "renesas,usb2-phy-r9a08g045", .data = &rz_g3s_phy_usb2_data, }, { + .compatible = "renesas,usb2-phy-r9a09g057", + .data = &rz_v2h_phy_usb2_data, + }, + { + .compatible = "renesas,rzg2l-usb2-phy", + .data = &rz_g2l_phy_usb2_data, + }, + { .compatible = "renesas,rcar-gen3-usb2-phy", .data = &rcar_gen3_phy_usb2_data, }, @@ -764,6 +792,8 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) if (phy_data->no_adp_ctrl) channel->obint_enable_bits = USB2_OBINT_IDCHG_EN; + channel->utmi_ctrl = phy_data->utmi_ctrl; + spin_lock_init(&channel->lock); for (i = 0; i < NUM_OF_PHYS; i++) { channel->rphys[i].phy = devm_phy_create(dev, NULL, diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c index b5e6a864deebbc..b0f23690ec3002 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -1583,6 +1583,37 @@ static int rk3588_usb2phy_tuning(struct rockchip_usb2phy *rphy) return ret; } +static const struct rockchip_usb2phy_cfg rk3036_phy_cfgs[] = { + { + .reg = 0x17c, + .num_ports = 2, + .phy_tuning = rk3128_usb2phy_tuning, + .clkout_ctl = { 0x017c, 11, 11, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0x017c, 8, 0, 0, 0x1d1 }, + .bvalid_det_en = { 0x017c, 14, 14, 0, 1 }, + .bvalid_det_st = { 0x017c, 15, 15, 0, 1 }, + .bvalid_det_clr = { 0x017c, 15, 15, 0, 1 }, + .ls_det_en = { 0x017c, 12, 12, 0, 1 }, + .ls_det_st = { 0x017c, 13, 13, 0, 1 }, + .ls_det_clr = { 0x017c, 13, 13, 0, 1 }, + .utmi_bvalid = { 0x014c, 8, 8, 0, 1 }, + .utmi_id = { 0x014c, 11, 11, 0, 1 }, + .utmi_ls = { 0x014c, 10, 9, 0, 1 }, + + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0x0194, 8, 0, 0, 0x1d1 }, + .ls_det_en = { 0x0194, 14, 14, 0, 1 }, + .ls_det_st = { 0x0194, 15, 15, 0, 1 }, + .ls_det_clr = { 0x0194, 15, 15, 0, 1 } + } + }, + }, + { /* sentinel */ } +}; + static const struct rockchip_usb2phy_cfg rk3128_phy_cfgs[] = { { .reg = 0x17c, @@ -1892,6 +1923,54 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = { { /* sentinel */ } }; +static const struct rockchip_usb2phy_cfg rk3562_phy_cfgs[] = { + { + .reg = 0xff740000, + .num_ports = 2, + .clkout_ctl = { 0x0108, 4, 4, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0x0100, 8, 0, 0, 0x1d1 }, + .bvalid_det_en = { 0x0110, 2, 2, 0, 1 }, + .bvalid_det_st = { 0x0114, 2, 2, 0, 1 }, + .bvalid_det_clr = { 0x0118, 2, 2, 0, 1 }, + .idfall_det_en = { 0x0110, 5, 5, 0, 1 }, + .idfall_det_st = { 0x0114, 5, 5, 0, 1 }, + .idfall_det_clr = { 0x0118, 5, 5, 0, 1 }, + .idrise_det_en = { 0x0110, 4, 4, 0, 1 }, + .idrise_det_st = { 0x0114, 4, 4, 0, 1 }, + .idrise_det_clr = { 0x0118, 4, 4, 0, 1 }, + .ls_det_en = { 0x0110, 0, 0, 0, 1 }, + .ls_det_st = { 0x0114, 0, 0, 0, 1 }, + .ls_det_clr = { 0x0118, 0, 0, 0, 1 }, + .utmi_avalid = { 0x0120, 10, 10, 0, 1 }, + .utmi_bvalid = { 0x0120, 9, 9, 0, 1 }, + .utmi_ls = { 0x0120, 5, 4, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0x0104, 8, 0, 0x1d2, 0x1d1 }, + .ls_det_en = { 0x0110, 1, 1, 0, 1 }, + .ls_det_st = { 0x0114, 1, 1, 0, 1 }, + .ls_det_clr = { 0x0118, 1, 1, 0, 1 }, + .utmi_ls = { 0x0120, 17, 16, 0, 1 }, + .utmi_hstdet = { 0x0120, 19, 19, 0, 1 } + } + }, + .chg_det = { + .cp_det = { 0x0120, 24, 24, 0, 1 }, + .dcp_det = { 0x0120, 23, 23, 0, 1 }, + .dp_det = { 0x0120, 25, 25, 0, 1 }, + .idm_sink_en = { 0x0108, 8, 8, 0, 1 }, + .idp_sink_en = { 0x0108, 7, 7, 0, 1 }, + .idp_src_en = { 0x0108, 9, 9, 0, 1 }, + .rdm_pdwn_en = { 0x0108, 10, 10, 0, 1 }, + .vdm_src_en = { 0x0108, 12, 12, 0, 1 }, + .vdp_src_en = { 0x0108, 11, 11, 0, 1 }, + }, + }, + { /* sentinel */ } +}; + static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = { { .reg = 0xfe8a0000, @@ -2204,12 +2283,14 @@ static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = { static const struct of_device_id rockchip_usb2phy_dt_match[] = { { .compatible = "rockchip,px30-usb2phy", .data = &rk3328_phy_cfgs }, + { .compatible = "rockchip,rk3036-usb2phy", .data = &rk3036_phy_cfgs }, { .compatible = "rockchip,rk3128-usb2phy", .data = &rk3128_phy_cfgs }, { .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs }, { .compatible = "rockchip,rk3308-usb2phy", .data = &rk3308_phy_cfgs }, { .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs }, { .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs }, { .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs }, + { .compatible = "rockchip,rk3562-usb2phy", .data = &rk3562_phy_cfgs }, { .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs }, { .compatible = "rockchip,rk3576-usb2phy", .data = &rk3576_phy_cfgs }, { .compatible = "rockchip,rk3588-usb2phy", .data = &rk3588_phy_cfgs }, diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c index 77236f012a1f75..79db57ee90d148 100644 --- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c +++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c @@ -320,6 +320,7 @@ #define LN3_TX_SER_RATE_SEL_HBR2_MASK BIT(3) #define LN3_TX_SER_RATE_SEL_HBR3_MASK BIT(2) +#define HDMI14_MAX_RATE 340000000 #define HDMI20_MAX_RATE 600000000 enum dp_link_rate { @@ -328,39 +329,8 @@ enum dp_link_rate { DP_BW_HBR2, }; -struct lcpll_config { - u32 bit_rate; - u8 lcvco_mode_en; - u8 pi_en; - u8 clk_en_100m; - u8 pms_mdiv; - u8 pms_mdiv_afc; - u8 pms_pdiv; - u8 pms_refdiv; - u8 pms_sdiv; - u8 pi_cdiv_rstn; - u8 pi_cdiv_sel; - u8 sdm_en; - u8 sdm_rstn; - u8 sdc_frac_en; - u8 sdc_rstn; - u8 sdm_deno; - u8 sdm_num_sign; - u8 sdm_num; - u8 sdc_n; - u8 sdc_n2; - u8 sdc_num; - u8 sdc_deno; - u8 sdc_ndiv_rstn; - u8 ssc_en; - u8 ssc_fm_dev; - u8 ssc_fm_freq; - u8 ssc_clk_div_sel; - u8 cd_tx_ser_rate_sel; -}; - struct ropll_config { - u32 bit_rate; + unsigned long long rate; u8 pms_mdiv; u8 pms_mdiv_afc; u8 pms_pdiv; @@ -422,19 +392,17 @@ struct rk_hdptx_phy { struct regmap *regmap; struct regmap *grf; - /* PHY const config */ - const struct rk_hdptx_phy_cfg *cfgs; int phy_id; - struct phy *phy; - struct phy_config *phy_cfg; + struct phy_configure_opts_hdmi hdmi_cfg; struct clk_bulk_data *clks; int nr_clks; struct reset_control_bulk_data rsts[RST_MAX]; /* clk provider */ struct clk_hw hw; - unsigned long rate; + unsigned long hw_rate; + bool restrict_rate_change; atomic_t usage_count; @@ -444,47 +412,47 @@ struct rk_hdptx_phy { }; static const struct ropll_config ropll_tmds_cfg[] = { - { 5940000, 124, 124, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0, + { 594000000ULL, 124, 124, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 3712500, 155, 155, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0, + { 371250000ULL, 155, 155, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 2970000, 124, 124, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0, + { 297000000ULL, 124, 124, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 1620000, 135, 135, 1, 1, 3, 1, 1, 0, 1, 1, 1, 1, 4, 0, 3, 5, 5, 0x10, + { 162000000ULL, 135, 135, 1, 1, 3, 1, 1, 0, 1, 1, 1, 1, 4, 0, 3, 5, 5, 0x10, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 1856250, 155, 155, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0, + { 185625000ULL, 155, 155, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 1540000, 193, 193, 1, 1, 5, 1, 1, 1, 1, 1, 1, 1, 193, 1, 32, 2, 1, + { 154000000ULL, 193, 193, 1, 1, 5, 1, 1, 1, 1, 1, 1, 1, 193, 1, 32, 2, 1, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 1485000, 0x7b, 0x7b, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 4, 0, 3, 5, 5, + { 148500000ULL, 0x7b, 0x7b, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 4, 0, 3, 5, 5, 0x10, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 1462500, 122, 122, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 244, 1, 16, 2, 1, 1, + { 146250000ULL, 122, 122, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 244, 1, 16, 2, 1, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 1190000, 149, 149, 1, 1, 5, 1, 1, 1, 1, 1, 1, 1, 149, 1, 16, 2, 1, 1, + { 119000000ULL, 149, 149, 1, 1, 5, 1, 1, 1, 1, 1, 1, 1, 149, 1, 16, 2, 1, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 1065000, 89, 89, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 89, 1, 16, 1, 0, 1, + { 106500000ULL, 89, 89, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 89, 1, 16, 1, 0, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 1080000, 135, 135, 1, 1, 5, 1, 1, 0, 1, 0, 1, 1, 0x9, 0, 0x05, 0, + { 108000000ULL, 135, 135, 1, 1, 5, 1, 1, 0, 1, 0, 1, 1, 0x9, 0, 0x05, 0, 0x14, 0x18, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 855000, 214, 214, 1, 1, 11, 1, 1, 1, 1, 1, 1, 1, 214, 1, 16, 2, 1, + { 85500000ULL, 214, 214, 1, 1, 11, 1, 1, 1, 1, 1, 1, 1, 214, 1, 16, 2, 1, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 835000, 105, 105, 1, 1, 5, 1, 1, 1, 1, 1, 1, 1, 42, 1, 16, 1, 0, + { 83500000ULL, 105, 105, 1, 1, 5, 1, 1, 1, 1, 1, 1, 1, 42, 1, 16, 1, 0, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 928125, 155, 155, 1, 1, 7, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0, + { 92812500ULL, 155, 155, 1, 1, 7, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 742500, 124, 124, 1, 1, 7, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0, + { 74250000ULL, 124, 124, 1, 1, 7, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 650000, 162, 162, 1, 1, 11, 1, 1, 1, 1, 1, 1, 1, 54, 0, 16, 4, 1, + { 65000000ULL, 162, 162, 1, 1, 11, 1, 1, 1, 1, 1, 1, 1, 54, 0, 16, 4, 1, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 502500, 84, 84, 1, 1, 7, 1, 1, 1, 1, 1, 1, 1, 11, 1, 4, 5, + { 50250000ULL, 84, 84, 1, 1, 7, 1, 1, 1, 1, 1, 1, 1, 11, 1, 4, 5, 4, 11, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 337500, 0x70, 0x70, 1, 1, 0xf, 1, 1, 1, 1, 1, 1, 1, 0x2, 0, 0x01, 5, + { 33750000ULL, 0x70, 0x70, 1, 1, 0xf, 1, 1, 1, 1, 1, 1, 1, 0x2, 0, 0x01, 5, 1, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 400000, 100, 100, 1, 1, 11, 1, 1, 0, 1, 0, 1, 1, 0x9, 0, 0x05, 0, + { 40000000ULL, 100, 100, 1, 1, 11, 1, 1, 0, 1, 0, 1, 1, 0x9, 0, 0x05, 0, 0x14, 0x18, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 270000, 0x5a, 0x5a, 1, 1, 0xf, 1, 1, 0, 1, 0, 1, 1, 0x9, 0, 0x05, 0, + { 27000000ULL, 0x5a, 0x5a, 1, 1, 0xf, 1, 1, 0, 1, 0, 1, 1, 0x9, 0, 0x05, 0, 0x14, 0x18, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, - { 251750, 84, 84, 1, 1, 0xf, 1, 1, 1, 1, 1, 1, 1, 168, 1, 16, 4, 1, 1, + { 25175000ULL, 84, 84, 1, 1, 0xf, 1, 1, 1, 1, 1, 1, 1, 168, 1, 16, 4, 1, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, }, }; @@ -930,10 +898,10 @@ static void rk_hdptx_phy_disable(struct rk_hdptx_phy *hdptx) regmap_write(hdptx->grf, GRF_HDPTX_CON0, val); } -static bool rk_hdptx_phy_clk_pll_calc(unsigned int data_rate, +static bool rk_hdptx_phy_clk_pll_calc(unsigned long long rate, struct ropll_config *cfg) { - const unsigned int fout = data_rate / 2, fref = 24000; + const unsigned int fout = div_u64(rate, 200), fref = 24000; unsigned long k = 0, lc, k_sub, lc_sub; unsigned int fvco, sdc; u32 mdiv, sdiv, n = 8; @@ -1002,33 +970,34 @@ static bool rk_hdptx_phy_clk_pll_calc(unsigned int data_rate, return true; } -static int rk_hdptx_ropll_tmds_cmn_config(struct rk_hdptx_phy *hdptx, - unsigned int rate) +static int rk_hdptx_ropll_tmds_cmn_config(struct rk_hdptx_phy *hdptx) { const struct ropll_config *cfg = NULL; struct ropll_config rc = {0}; - int i; + int ret, i; - hdptx->rate = rate * 100; + if (!hdptx->hdmi_cfg.tmds_char_rate) + return 0; for (i = 0; i < ARRAY_SIZE(ropll_tmds_cfg); i++) - if (rate == ropll_tmds_cfg[i].bit_rate) { + if (hdptx->hdmi_cfg.tmds_char_rate == ropll_tmds_cfg[i].rate) { cfg = &ropll_tmds_cfg[i]; break; } if (!cfg) { - if (rk_hdptx_phy_clk_pll_calc(rate, &rc)) { - cfg = &rc; - } else { - dev_err(hdptx->dev, "%s cannot find pll cfg\n", __func__); + if (!rk_hdptx_phy_clk_pll_calc(hdptx->hdmi_cfg.tmds_char_rate, &rc)) { + dev_err(hdptx->dev, "%s cannot find pll cfg for rate=%llu\n", + __func__, hdptx->hdmi_cfg.tmds_char_rate); return -EINVAL; } + + cfg = &rc; } - dev_dbg(hdptx->dev, "mdiv=%u, sdiv=%u, sdm_en=%u, k_sign=%u, k=%u, lc=%u\n", - cfg->pms_mdiv, cfg->pms_sdiv + 1, cfg->sdm_en, - cfg->sdm_num_sign, cfg->sdm_num, cfg->sdm_deno); + dev_dbg(hdptx->dev, "%s rate=%llu mdiv=%u sdiv=%u sdm_en=%u k_sign=%u k=%u lc=%u\n", + __func__, hdptx->hdmi_cfg.tmds_char_rate, cfg->pms_mdiv, cfg->pms_sdiv + 1, + cfg->sdm_en, cfg->sdm_num_sign, cfg->sdm_num, cfg->sdm_deno); rk_hdptx_pre_power_up(hdptx); @@ -1061,20 +1030,26 @@ static int rk_hdptx_ropll_tmds_cmn_config(struct rk_hdptx_phy *hdptx, regmap_update_bits(hdptx->regmap, CMN_REG(0086), PLL_PCG_POSTDIV_SEL_MASK, FIELD_PREP(PLL_PCG_POSTDIV_SEL_MASK, cfg->pms_sdiv)); + regmap_update_bits(hdptx->regmap, CMN_REG(0086), PLL_PCG_CLK_SEL_MASK, + FIELD_PREP(PLL_PCG_CLK_SEL_MASK, (hdptx->hdmi_cfg.bpc - 8) >> 1)); + regmap_update_bits(hdptx->regmap, CMN_REG(0086), PLL_PCG_CLK_EN_MASK, FIELD_PREP(PLL_PCG_CLK_EN_MASK, 0x1)); - return rk_hdptx_post_enable_pll(hdptx); + ret = rk_hdptx_post_enable_pll(hdptx); + if (!ret) + hdptx->hw_rate = hdptx->hdmi_cfg.tmds_char_rate; + + return ret; } -static int rk_hdptx_ropll_tmds_mode_config(struct rk_hdptx_phy *hdptx, - unsigned int rate) +static int rk_hdptx_ropll_tmds_mode_config(struct rk_hdptx_phy *hdptx) { rk_hdptx_multi_reg_write(hdptx, rk_hdtpx_common_sb_init_seq); regmap_write(hdptx->regmap, LNTOP_REG(0200), 0x06); - if (rate >= 3400000) { + if (hdptx->hdmi_cfg.tmds_char_rate > HDMI14_MAX_RATE) { /* For 1/40 bitrate clk */ rk_hdptx_multi_reg_write(hdptx, rk_hdtpx_tmds_lntop_highbr_seq); } else { @@ -1126,8 +1101,7 @@ static void rk_hdptx_dp_reset(struct rk_hdptx_phy *hdptx) HDPTX_I_BGR_EN << 16 | FIELD_PREP(HDPTX_I_BGR_EN, 0x0)); } -static int rk_hdptx_phy_consumer_get(struct rk_hdptx_phy *hdptx, - unsigned int rate) +static int rk_hdptx_phy_consumer_get(struct rk_hdptx_phy *hdptx) { enum phy_mode mode = phy_get_mode(hdptx->phy); u32 status; @@ -1146,11 +1120,9 @@ static int rk_hdptx_phy_consumer_get(struct rk_hdptx_phy *hdptx, if (mode == PHY_MODE_DP) { rk_hdptx_dp_reset(hdptx); } else { - if (rate) { - ret = rk_hdptx_ropll_tmds_cmn_config(hdptx, rate); - if (ret) - goto dec_usage; - } + ret = rk_hdptx_ropll_tmds_cmn_config(hdptx); + if (ret) + goto dec_usage; } return 0; @@ -1445,21 +1417,26 @@ static int rk_hdptx_dp_aux_init(struct rk_hdptx_phy *hdptx) static int rk_hdptx_phy_power_on(struct phy *phy) { struct rk_hdptx_phy *hdptx = phy_get_drvdata(phy); - int bus_width = phy_get_bus_width(hdptx->phy); enum phy_mode mode = phy_get_mode(phy); int ret, lane; - /* - * FIXME: Temporary workaround to pass pixel_clk_rate - * from the HDMI bridge driver until phy_configure_opts_hdmi - * becomes available in the PHY API. - */ - unsigned int rate = bus_width & 0xfffffff; + if (mode != PHY_MODE_DP) { + if (!hdptx->hdmi_cfg.tmds_char_rate) { + /* + * FIXME: Temporary workaround to setup TMDS char rate + * from the RK DW HDMI QP bridge driver. + * Will be removed as soon the switch to the HDMI PHY + * configuration API has been completed on both ends. + */ + hdptx->hdmi_cfg.tmds_char_rate = phy_get_bus_width(hdptx->phy) & 0xfffffff; + hdptx->hdmi_cfg.tmds_char_rate *= 100; + } - dev_dbg(hdptx->dev, "%s bus_width=%x rate=%u\n", - __func__, bus_width, rate); + dev_dbg(hdptx->dev, "%s rate=%llu bpc=%u\n", __func__, + hdptx->hdmi_cfg.tmds_char_rate, hdptx->hdmi_cfg.bpc); + } - ret = rk_hdptx_phy_consumer_get(hdptx, rate); + ret = rk_hdptx_phy_consumer_get(hdptx); if (ret) return ret; @@ -1490,7 +1467,7 @@ static int rk_hdptx_phy_power_on(struct phy *phy) regmap_write(hdptx->grf, GRF_HDPTX_CON0, HDPTX_MODE_SEL << 16 | FIELD_PREP(HDPTX_MODE_SEL, 0x0)); - ret = rk_hdptx_ropll_tmds_mode_config(hdptx, rate); + ret = rk_hdptx_ropll_tmds_mode_config(hdptx); if (ret) rk_hdptx_phy_consumer_put(hdptx, true); } @@ -1505,8 +1482,40 @@ static int rk_hdptx_phy_power_off(struct phy *phy) return rk_hdptx_phy_consumer_put(hdptx, false); } -static int rk_hdptx_phy_verify_config(struct rk_hdptx_phy *hdptx, - struct phy_configure_opts_dp *dp) +static int rk_hdptx_phy_verify_hdmi_config(struct rk_hdptx_phy *hdptx, + struct phy_configure_opts_hdmi *hdmi) +{ + int i; + + if (!hdmi->tmds_char_rate || hdmi->tmds_char_rate > HDMI20_MAX_RATE) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(ropll_tmds_cfg); i++) + if (hdmi->tmds_char_rate == ropll_tmds_cfg[i].rate) + break; + + if (i == ARRAY_SIZE(ropll_tmds_cfg) && + !rk_hdptx_phy_clk_pll_calc(hdmi->tmds_char_rate, NULL)) + return -EINVAL; + + if (!hdmi->bpc) + hdmi->bpc = 8; + + switch (hdmi->bpc) { + case 8: + case 10: + case 12: + case 16: + break; + default: + return -EINVAL; + } + + return 0; +} + +static int rk_hdptx_phy_verify_dp_config(struct rk_hdptx_phy *hdptx, + struct phy_configure_opts_dp *dp) { int i; @@ -1766,12 +1775,23 @@ static int rk_hdptx_phy_configure(struct phy *phy, union phy_configure_opts *opt enum phy_mode mode = phy_get_mode(phy); int ret; - if (mode != PHY_MODE_DP) - return 0; + if (mode != PHY_MODE_DP) { + ret = rk_hdptx_phy_verify_hdmi_config(hdptx, &opts->hdmi); + if (ret) { + dev_err(hdptx->dev, "invalid hdmi params for phy configure\n"); + } else { + hdptx->hdmi_cfg = opts->hdmi; + hdptx->restrict_rate_change = true; + } - ret = rk_hdptx_phy_verify_config(hdptx, &opts->dp); + dev_dbg(hdptx->dev, "%s rate=%llu bpc=%u\n", __func__, + hdptx->hdmi_cfg.tmds_char_rate, hdptx->hdmi_cfg.bpc); + return ret; + } + + ret = rk_hdptx_phy_verify_dp_config(hdptx, &opts->dp); if (ret) { - dev_err(hdptx->dev, "invalid params for phy configure\n"); + dev_err(hdptx->dev, "invalid dp params for phy configure\n"); return ret; } @@ -1803,10 +1823,22 @@ static int rk_hdptx_phy_configure(struct phy *phy, union phy_configure_opts *opt return 0; } +static int rk_hdptx_phy_validate(struct phy *phy, enum phy_mode mode, + int submode, union phy_configure_opts *opts) +{ + struct rk_hdptx_phy *hdptx = phy_get_drvdata(phy); + + if (mode != PHY_MODE_DP) + return rk_hdptx_phy_verify_hdmi_config(hdptx, &opts->hdmi); + + return rk_hdptx_phy_verify_dp_config(hdptx, &opts->dp); +} + static const struct phy_ops rk_hdptx_phy_ops = { .power_on = rk_hdptx_phy_power_on, .power_off = rk_hdptx_phy_power_off, .configure = rk_hdptx_phy_configure, + .validate = rk_hdptx_phy_validate, .owner = THIS_MODULE, }; @@ -1819,7 +1851,7 @@ static int rk_hdptx_phy_clk_prepare(struct clk_hw *hw) { struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw); - return rk_hdptx_phy_consumer_get(hdptx, hdptx->rate / 100); + return rk_hdptx_phy_consumer_get(hdptx); } static void rk_hdptx_phy_clk_unprepare(struct clk_hw *hw) @@ -1834,27 +1866,37 @@ static unsigned long rk_hdptx_phy_clk_recalc_rate(struct clk_hw *hw, { struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw); - return hdptx->rate; + return hdptx->hw_rate; } static long rk_hdptx_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate) { - u32 bit_rate = rate / 100; - int i; + struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw); - if (rate > HDMI20_MAX_RATE) - return rate; + /* + * FIXME: Temporarily allow altering TMDS char rate via CCF. + * To be dropped as soon as the RK DW HDMI QP bridge driver + * switches to make use of phy_configure(). + */ + if (!hdptx->restrict_rate_change && rate != hdptx->hdmi_cfg.tmds_char_rate) { + struct phy_configure_opts_hdmi hdmi = { + .tmds_char_rate = rate, + }; + int ret = rk_hdptx_phy_verify_hdmi_config(hdptx, &hdmi); - for (i = 0; i < ARRAY_SIZE(ropll_tmds_cfg); i++) - if (bit_rate == ropll_tmds_cfg[i].bit_rate) - break; + if (ret) + return ret; - if (i == ARRAY_SIZE(ropll_tmds_cfg) && - !rk_hdptx_phy_clk_pll_calc(bit_rate, NULL)) - return -EINVAL; + hdptx->hdmi_cfg = hdmi; + } - return rate; + /* + * The TMDS char rate shall be adjusted via phy_configure() only, + * hence ensure rk_hdptx_phy_clk_set_rate() won't be invoked with + * a different rate argument. + */ + return hdptx->hdmi_cfg.tmds_char_rate; } static int rk_hdptx_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate, @@ -1862,7 +1904,21 @@ static int rk_hdptx_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate, { struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw); - return rk_hdptx_ropll_tmds_cmn_config(hdptx, rate / 100); + /* Revert any unlikely TMDS char rate change since round_rate() */ + if (hdptx->hdmi_cfg.tmds_char_rate != rate) { + dev_warn(hdptx->dev, "Reverting unexpected rate change from %lu to %llu\n", + rate, hdptx->hdmi_cfg.tmds_char_rate); + hdptx->hdmi_cfg.tmds_char_rate = rate; + } + + /* + * The TMDS char rate would be normally programmed in HW during + * phy_ops.power_on() or clk_ops.prepare() callbacks, but it might + * happen that the former gets fired too late, i.e. after this call, + * while the latter being executed only once, i.e. when clock remains + * in the prepared state during rate changes. + */ + return rk_hdptx_ropll_tmds_cmn_config(hdptx); } static const struct clk_ops hdptx_phy_clk_ops = { @@ -1925,6 +1981,7 @@ static int rk_hdptx_phy_runtime_resume(struct device *dev) static int rk_hdptx_phy_probe(struct platform_device *pdev) { + const struct rk_hdptx_phy_cfg *cfgs; struct phy_provider *phy_provider; struct device *dev = &pdev->dev; struct rk_hdptx_phy *hdptx; @@ -1937,20 +1994,21 @@ static int rk_hdptx_phy_probe(struct platform_device *pdev) return -ENOMEM; hdptx->dev = dev; + hdptx->hdmi_cfg.bpc = 8; regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res); if (IS_ERR(regs)) return dev_err_probe(dev, PTR_ERR(regs), "Failed to ioremap resource\n"); - hdptx->cfgs = device_get_match_data(dev); - if (!hdptx->cfgs) + cfgs = device_get_match_data(dev); + if (!cfgs) return dev_err_probe(dev, -EINVAL, "missing match data\n"); /* find the phy-id from the io address */ hdptx->phy_id = -ENODEV; - for (id = 0; id < hdptx->cfgs->num_phys; id++) { - if (res->start == hdptx->cfgs->phy_ids[id]) { + for (id = 0; id < cfgs->num_phys; id++) { + if (res->start == cfgs->phy_ids[id]) { hdptx->phy_id = id; break; } diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig index 6566100441d616..b7ab402909a825 100644 --- a/drivers/phy/samsung/Kconfig +++ b/drivers/phy/samsung/Kconfig @@ -85,7 +85,7 @@ config PHY_EXYNOS5_USBDRD depends on USB_DWC3_EXYNOS select GENERIC_PHY select MFD_SYSCON - default y + default ARCH_EXYNOS help Enable USB DRD PHY support for Exynos 5 SoC series. This driver provides PHY interface for USB 3.0 DRD controller diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c index 817fddee03927c..917a76d584f085 100644 --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c @@ -36,14 +36,40 @@ #define EXYNOS5_FSEL_26MHZ 0x6 #define EXYNOS5_FSEL_50MHZ 0x7 +/* USB 3.2 DRD 4nm PHY link controller registers */ +#define EXYNOS2200_DRD_CLKRST 0x0c +#define EXYNOS2200_CLKRST_LINK_PCLK_SEL BIT(1) + +#define EXYNOS2200_DRD_UTMI 0x10 +#define EXYNOS2200_UTMI_FORCE_VBUSVALID BIT(1) +#define EXYNOS2200_UTMI_FORCE_BVALID BIT(0) + +#define EXYNOS2200_DRD_HSP_MISC 0x114 +#define HSP_MISC_SET_REQ_IN2 BIT(4) +#define HSP_MISC_RES_TUNE GENMASK(1, 0) +#define RES_TUNE_PHY1_PHY2 0x1 +#define RES_TUNE_PHY1 0x2 +#define RES_TUNE_PHY2 0x3 + /* Exynos5: USB 3.0 DRD PHY registers */ #define EXYNOS5_DRD_LINKSYSTEM 0x04 #define LINKSYSTEM_XHCI_VERSION_CONTROL BIT(27) -#define LINKSYSTEM_FLADJ_MASK (0x3f << 1) -#define LINKSYSTEM_FLADJ(_x) ((_x) << 1) +#define LINKSYSTEM_FORCE_VBUSVALID BIT(8) +#define LINKSYSTEM_FORCE_BVALID BIT(7) +#define LINKSYSTEM_FLADJ GENMASK(6, 1) #define EXYNOS5_DRD_PHYUTMI 0x08 +#define PHYUTMI_UTMI_SUSPEND_COM_N BIT(12) +#define PHYUTMI_UTMI_L1_SUSPEND_COM_N BIT(11) +#define PHYUTMI_VBUSVLDEXTSEL BIT(10) +#define PHYUTMI_VBUSVLDEXT BIT(9) +#define PHYUTMI_TXBITSTUFFENH BIT(8) +#define PHYUTMI_TXBITSTUFFEN BIT(7) #define PHYUTMI_OTGDISABLE BIT(6) +#define PHYUTMI_IDPULLUP BIT(5) +#define PHYUTMI_DRVVBUS BIT(4) +#define PHYUTMI_DPPULLDOWN BIT(3) +#define PHYUTMI_DMPULLDOWN BIT(2) #define PHYUTMI_FORCESUSPEND BIT(1) #define PHYUTMI_FORCESLEEP BIT(0) @@ -51,30 +77,27 @@ #define EXYNOS5_DRD_PHYCLKRST 0x10 #define PHYCLKRST_EN_UTMISUSPEND BIT(31) -#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23) -#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23) -#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21) -#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21) +#define PHYCLKRST_SSC_REFCLKSEL GENMASK(30, 23) +#define PHYCLKRST_SSC_RANGE GENMASK(22, 21) #define PHYCLKRST_SSC_EN BIT(20) #define PHYCLKRST_REF_SSP_EN BIT(19) #define PHYCLKRST_REF_CLKDIV2 BIT(18) -#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11) -#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11) -#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x32 << 11) -#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11) -#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11) -#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11) -#define PHYCLKRST_FSEL_PIPE_MASK (0x7 << 8) -#define PHYCLKRST_FSEL_UTMI_MASK (0x7 << 5) -#define PHYCLKRST_FSEL(_x) ((_x) << 5) -#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5) -#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5) -#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5) -#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5) +#define PHYCLKRST_MPLL_MULTIPLIER GENMASK(17, 11) +#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF 0x19 +#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF 0x32 +#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF 0x68 +#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF 0x7d +#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF 0x02 +#define PHYCLKRST_FSEL_PIPE GENMASK(10, 8) +#define PHYCLKRST_FSEL_UTMI GENMASK(7, 5) +#define PHYCLKRST_FSEL_PAD_100MHZ 0x27 +#define PHYCLKRST_FSEL_PAD_24MHZ 0x2a +#define PHYCLKRST_FSEL_PAD_20MHZ 0x31 +#define PHYCLKRST_FSEL_PAD_19_2MHZ 0x38 #define PHYCLKRST_RETENABLEN BIT(4) -#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2) -#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2) -#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2) +#define PHYCLKRST_REFCLKSEL GENMASK(3, 2) +#define PHYCLKRST_REFCLKSEL_PAD_REFCLK 0x2 +#define PHYCLKRST_REFCLKSEL_EXT_REFCLK 0x3 #define PHYCLKRST_PORTRESET BIT(1) #define PHYCLKRST_COMMONONN BIT(0) @@ -83,22 +106,32 @@ #define PHYREG0_SSC_RANGE BIT(20) #define PHYREG0_CR_WRITE BIT(19) #define PHYREG0_CR_READ BIT(18) -#define PHYREG0_CR_DATA_IN(_x) ((_x) << 2) +#define PHYREG0_CR_DATA_IN GENMASK(17, 2) #define PHYREG0_CR_CAP_DATA BIT(1) #define PHYREG0_CR_CAP_ADDR BIT(0) #define EXYNOS5_DRD_PHYREG1 0x18 -#define PHYREG1_CR_DATA_OUT(_x) ((_x) << 1) +#define PHYREG0_CR_DATA_OUT GENMASK(16, 1) #define PHYREG1_CR_ACK BIT(0) #define EXYNOS5_DRD_PHYPARAM0 0x1c #define PHYPARAM0_REF_USE_PAD BIT(31) -#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26) -#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26) +#define PHYPARAM0_REF_LOSLEVEL GENMASK(30, 26) +#define PHYPARAM0_REF_LOSLEVEL_VAL 0x9 +#define PHYPARAM0_TXVREFTUNE GENMASK(25, 22) +#define PHYPARAM0_TXRISETUNE GENMASK(21, 20) +#define PHYPARAM0_TXRESTUNE GENMASK(19, 18) +#define PHYPARAM0_TXPREEMPPULSETUNE BIT(17) +#define PHYPARAM0_TXPREEMPAMPTUNE GENMASK(16, 15) +#define PHYPARAM0_TXHSXVTUNE GENMASK(14, 13) +#define PHYPARAM0_TXFSLSTUNE GENMASK(12, 9) +#define PHYPARAM0_SQRXTUNE GENMASK(8, 6) +#define PHYPARAM0_OTGTUNE GENMASK(5, 3) +#define PHYPARAM0_COMPDISTUNE GENMASK(2, 0) #define EXYNOS5_DRD_PHYPARAM1 0x20 -#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) -#define PHYPARAM1_PCS_TXDEEMPH (0x1c) +#define PHYPARAM1_PCS_TXDEEMPH GENMASK(4, 0) +#define PHYPARAM1_PCS_TXDEEMPH_VAL 0x1c #define EXYNOS5_DRD_PHYTERM 0x24 @@ -114,6 +147,12 @@ #define EXYNOS5_DRD_PHYRESUME 0x34 #define EXYNOS5_DRD_LINKPORT 0x44 +#define LINKPORT_HOST_U3_PORT_DISABLE BIT(8) +#define LINKPORT_HOST_U2_PORT_DISABLE BIT(7) +#define LINKPORT_HOST_PORT_OVCR_U3 BIT(5) +#define LINKPORT_HOST_PORT_OVCR_U2 BIT(4) +#define LINKPORT_HOST_PORT_OVCR_U3_SEL BIT(3) +#define LINKPORT_HOST_PORT_OVCR_U2_SEL BIT(2) /* USB 3.0 DRD PHY SS Function Control Reg; accessed by CR_PORT */ #define EXYNOS5_DRD_PHYSS_LOSLEVEL_OVRD_IN (0x15) @@ -134,13 +173,31 @@ #define LANE0_TX_DEBUG_RXDET_MEAS_TIME_62M5 (0x20 << 4) #define LANE0_TX_DEBUG_RXDET_MEAS_TIME_96M_100M (0x40 << 4) +/* Exynos7870: USB DRD PHY registers */ +#define EXYNOS7870_DRD_PHYPCSVAL 0x3C +#define PHYPCSVAL_PCS_RX_LOS_MASK GENMASK(9, 0) + +#define EXYNOS7870_DRD_PHYPARAM2 0x50 +#define PHYPARAM2_TX_VBOOST_LVL GENMASK(6, 4) +#define PHYPARAM2_LOS_BIAS GENMASK(2, 0) + +#define EXYNOS7870_DRD_HSPHYCTRL 0x54 +#define HSPHYCTRL_PHYSWRSTALL BIT(31) +#define HSPHYCTRL_SIDDQ BIT(6) +#define HSPHYCTRL_PHYSWRST BIT(0) + +#define EXYNOS7870_DRD_HSPHYPLLTUNE 0x70 +#define HSPHYPLLTUNE_PLL_B_TUNE BIT(6) +#define HSPHYPLLTUNE_PLL_I_TUNE GENMASK(5, 4) +#define HSPHYPLLTUNE_PLL_P_TUNE GENMASK(3, 0) + /* Exynos850: USB DRD PHY registers */ #define EXYNOS850_DRD_LINKCTRL 0x04 #define LINKCTRL_FORCE_RXELECIDLE BIT(18) #define LINKCTRL_FORCE_PHYSTATUS BIT(17) #define LINKCTRL_FORCE_PIPE_EN BIT(16) #define LINKCTRL_FORCE_QACT BIT(8) -#define LINKCTRL_BUS_FILTER_BYPASS(_x) ((_x) << 4) +#define LINKCTRL_BUS_FILTER_BYPASS GENMASK(7, 4) #define EXYNOS850_DRD_LINKPORT 0x08 #define LINKPORT_HOST_NUM_U3 GENMASK(19, 16) @@ -389,6 +446,7 @@ struct exynos5_usbdrd_phy_drvdata { * @clks: clocks for register access * @core_clks: core clocks for phy (ref, pipe3, utmi+, ITP, etc. as required) * @drv_data: pointer to SoC level driver data structure + * @hs_phy: pointer to non-Samsung IP high-speed phy controller * @phy_mutex: mutex protecting phy_init/exit & TCPC callbacks * @phys: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY * instances each with its 'phy' and 'phy_cfg'. @@ -406,6 +464,7 @@ struct exynos5_usbdrd_phy { struct clk_bulk_data *clks; struct clk_bulk_data *core_clks; const struct exynos5_usbdrd_phy_drvdata *drv_data; + struct phy *hs_phy; struct mutex phy_mutex; struct phy_usb_instance { struct phy *phy; @@ -497,29 +556,33 @@ exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst) reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); /* Use EXTREFCLK as ref clock */ - reg &= ~PHYCLKRST_REFCLKSEL_MASK; - reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK; + reg &= ~PHYCLKRST_REFCLKSEL; + reg |= FIELD_PREP(PHYCLKRST_REFCLKSEL, PHYCLKRST_REFCLKSEL_EXT_REFCLK); /* FSEL settings corresponding to reference clock */ - reg &= ~(PHYCLKRST_FSEL_PIPE_MASK | - PHYCLKRST_MPLL_MULTIPLIER_MASK | - PHYCLKRST_SSC_REFCLKSEL_MASK); + reg &= ~(PHYCLKRST_FSEL_PIPE | + PHYCLKRST_MPLL_MULTIPLIER | + PHYCLKRST_SSC_REFCLKSEL); switch (phy_drd->extrefclk) { case EXYNOS5_FSEL_50MHZ: - reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF | - PHYCLKRST_SSC_REFCLKSEL(0x00)); + reg |= (FIELD_PREP(PHYCLKRST_SSC_REFCLKSEL, 0x00) | + FIELD_PREP(PHYCLKRST_MPLL_MULTIPLIER, + PHYCLKRST_MPLL_MULTIPLIER_50M_REF)); break; case EXYNOS5_FSEL_24MHZ: - reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF | - PHYCLKRST_SSC_REFCLKSEL(0x88)); + reg |= (FIELD_PREP(PHYCLKRST_SSC_REFCLKSEL, 0x88) | + FIELD_PREP(PHYCLKRST_MPLL_MULTIPLIER, + PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF)); break; case EXYNOS5_FSEL_20MHZ: - reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF | - PHYCLKRST_SSC_REFCLKSEL(0x00)); + reg |= (FIELD_PREP(PHYCLKRST_SSC_REFCLKSEL, 0x00) | + FIELD_PREP(PHYCLKRST_MPLL_MULTIPLIER, + PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF)); break; case EXYNOS5_FSEL_19MHZ2: - reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF | - PHYCLKRST_SSC_REFCLKSEL(0x88)); + reg |= (FIELD_PREP(PHYCLKRST_SSC_REFCLKSEL, 0x88) | + FIELD_PREP(PHYCLKRST_MPLL_MULTIPLIER, + PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF)); break; default: dev_dbg(phy_drd->dev, "unsupported ref clk\n"); @@ -542,13 +605,13 @@ exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst) /* restore any previous reference clock settings */ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); - reg &= ~PHYCLKRST_REFCLKSEL_MASK; - reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK; + reg &= ~PHYCLKRST_REFCLKSEL; + reg |= FIELD_PREP(PHYCLKRST_REFCLKSEL, PHYCLKRST_REFCLKSEL_EXT_REFCLK); - reg &= ~(PHYCLKRST_FSEL_UTMI_MASK | - PHYCLKRST_MPLL_MULTIPLIER_MASK | - PHYCLKRST_SSC_REFCLKSEL_MASK); - reg |= PHYCLKRST_FSEL(phy_drd->extrefclk); + reg &= ~(PHYCLKRST_FSEL_UTMI | + PHYCLKRST_MPLL_MULTIPLIER | + PHYCLKRST_SSC_REFCLKSEL); + reg |= FIELD_PREP(PHYCLKRST_FSEL_UTMI, phy_drd->extrefclk); return reg; } @@ -598,8 +661,8 @@ static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd) reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); /* Set Tx De-Emphasis level */ - reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; - reg |= PHYPARAM1_PCS_TXDEEMPH; + reg &= ~PHYPARAM1_PCS_TXDEEMPH; + reg |= FIELD_PREP(PHYPARAM1_PCS_TXDEEMPH, PHYPARAM1_PCS_TXDEEMPH_VAL); writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); @@ -749,14 +812,14 @@ static void exynos5_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); /* Set Loss-of-Signal Detector sensitivity */ - reg &= ~PHYPARAM0_REF_LOSLEVEL_MASK; - reg |= PHYPARAM0_REF_LOSLEVEL; + reg &= ~PHYPARAM0_REF_LOSLEVEL; + reg |= FIELD_PREP(PHYPARAM0_REF_LOSLEVEL, PHYPARAM0_REF_LOSLEVEL_VAL); writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); /* Set Tx De-Emphasis level */ - reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; - reg |= PHYPARAM1_PCS_TXDEEMPH; + reg &= ~PHYPARAM1_PCS_TXDEEMPH; + reg |= FIELD_PREP(PHYPARAM1_PCS_TXDEEMPH, PHYPARAM1_PCS_TXDEEMPH_VAL); writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); /* UTMI Power Control */ @@ -787,7 +850,7 @@ static int exynos5_usbdrd_phy_init(struct phy *phy) * See xHCI 1.0 spec, 5.2.4 */ reg = LINKSYSTEM_XHCI_VERSION_CONTROL | - LINKSYSTEM_FLADJ(0x20); + FIELD_PREP(LINKSYSTEM_FLADJ, 0x20); writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); @@ -946,26 +1009,24 @@ static int crport_handshake(struct exynos5_usbdrd_phy *phy_drd, static int crport_ctrl_write(struct exynos5_usbdrd_phy *phy_drd, u32 addr, u32 data) { + u32 val; int ret; /* Write Address */ - writel(PHYREG0_CR_DATA_IN(addr), - phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); - ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(addr), - PHYREG0_CR_CAP_ADDR); + val = FIELD_PREP(PHYREG0_CR_DATA_IN, addr); + writel(val, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + ret = crport_handshake(phy_drd, val, PHYREG0_CR_CAP_ADDR); if (ret) return ret; /* Write Data */ - writel(PHYREG0_CR_DATA_IN(data), - phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); - ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(data), - PHYREG0_CR_CAP_DATA); + val = FIELD_PREP(PHYREG0_CR_DATA_IN, data); + writel(val, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + ret = crport_handshake(phy_drd, val, PHYREG0_CR_CAP_DATA); if (ret) return ret; - ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(data), - PHYREG0_CR_WRITE); + ret = crport_handshake(phy_drd, val, PHYREG0_CR_WRITE); return ret; } @@ -1075,6 +1136,315 @@ static const struct phy_ops exynos5_usbdrd_phy_ops = { .owner = THIS_MODULE, }; +static void exynos7870_usbdrd_phy_isol(struct phy_usb_instance *inst, + bool isolate) +{ + unsigned int val; + + if (!inst->reg_pmu) + return; + + val = isolate ? 0 : EXYNOS7870_USB2PHY_ENABLE; + + regmap_update_bits(inst->reg_pmu, inst->pmu_offset, + EXYNOS7870_USB2PHY_ENABLE, val); +} + +static void exynos7870_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + u32 reg; + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + /* Use PADREFCLK as ref clock */ + reg &= ~PHYCLKRST_REFCLKSEL; + reg |= FIELD_PREP(PHYCLKRST_REFCLKSEL, PHYCLKRST_REFCLKSEL_PAD_REFCLK); + /* Select ref clock rate */ + reg &= ~PHYCLKRST_FSEL_UTMI; + reg &= ~PHYCLKRST_FSEL_PIPE; + reg |= FIELD_PREP(PHYCLKRST_FSEL_UTMI, phy_drd->extrefclk); + /* Enable suspend and reset the port */ + reg |= PHYCLKRST_EN_UTMISUSPEND; + reg |= PHYCLKRST_COMMONONN; + reg |= PHYCLKRST_PORTRESET; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + udelay(10); + + /* Clear the port reset bit */ + reg &= ~PHYCLKRST_PORTRESET; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + /* Change PHY PLL tune value */ + reg = readl(phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYPLLTUNE); + if (phy_drd->extrefclk == EXYNOS5_FSEL_24MHZ) + reg |= HSPHYPLLTUNE_PLL_B_TUNE; + else + reg &= ~HSPHYPLLTUNE_PLL_B_TUNE; + reg &= ~HSPHYPLLTUNE_PLL_P_TUNE; + reg |= FIELD_PREP(HSPHYPLLTUNE_PLL_P_TUNE, 14); + writel(reg, phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYPLLTUNE); + + /* High-Speed PHY control */ + reg = readl(phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + reg &= ~HSPHYCTRL_SIDDQ; + reg &= ~HSPHYCTRL_PHYSWRST; + reg &= ~HSPHYCTRL_PHYSWRSTALL; + writel(reg, phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + udelay(500); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + /* + * Setting the Frame length Adj value[6:1] to default 0x20 + * See xHCI 1.0 spec, 5.2.4 + */ + reg |= LINKSYSTEM_XHCI_VERSION_CONTROL; + reg &= ~LINKSYSTEM_FLADJ; + reg |= FIELD_PREP(LINKSYSTEM_FLADJ, 0x20); + /* Set VBUSVALID signal as the VBUS pad is not used */ + reg |= LINKSYSTEM_FORCE_BVALID; + reg |= LINKSYSTEM_FORCE_VBUSVALID; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + /* Release force_sleep & force_suspend */ + reg &= ~PHYUTMI_FORCESLEEP; + reg &= ~PHYUTMI_FORCESUSPEND; + /* DP/DM pull down control */ + reg &= ~PHYUTMI_DMPULLDOWN; + reg &= ~PHYUTMI_DPPULLDOWN; + reg &= ~PHYUTMI_DRVVBUS; + /* Set DP-pull up as the VBUS pad is not used */ + reg |= PHYUTMI_VBUSVLDEXTSEL; + reg |= PHYUTMI_VBUSVLDEXT; + /* Disable OTG block and VBUS valid comparator */ + reg |= PHYUTMI_OTGDISABLE; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + + /* Configure OVC IO usage */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_LINKPORT); + reg |= LINKPORT_HOST_PORT_OVCR_U3_SEL | LINKPORT_HOST_PORT_OVCR_U2_SEL; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKPORT); + + /* High-Speed PHY swrst */ + reg = readl(phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + reg |= HSPHYCTRL_PHYSWRST; + writel(reg, phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + udelay(20); + + /* Clear the PHY swrst bit */ + reg = readl(phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + reg &= ~HSPHYCTRL_PHYSWRST; + writel(reg, phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + + if (phy_drd->drv_data->phy_tunes) + exynos5_usbdrd_apply_phy_tunes(phy_drd, + PTS_UTMI_POSTINIT); +} + +static int exynos7870_usbdrd_phy_init(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + /* UTMI or PIPE3 specific init */ + inst->phy_cfg->phy_init(phy_drd); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static int exynos7870_usbdrd_phy_exit(struct phy *phy) +{ + int ret; + u32 reg; + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + /* + * Disable the VBUS signal and the ID pull-up resistor. + * Enable force-suspend and force-sleep modes. + */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + reg &= ~(PHYUTMI_DRVVBUS | PHYUTMI_VBUSVLDEXT | PHYUTMI_VBUSVLDEXTSEL); + reg &= ~PHYUTMI_IDPULLUP; + reg |= PHYUTMI_FORCESUSPEND | PHYUTMI_FORCESLEEP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + + /* Power down PHY analog blocks */ + reg = readl(phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + reg |= HSPHYCTRL_SIDDQ; + writel(reg, phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + + /* Clear VBUSVALID signal as the VBUS pad is not used */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + reg &= ~(LINKSYSTEM_FORCE_BVALID | LINKSYSTEM_FORCE_VBUSVALID); + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static const struct phy_ops exynos7870_usbdrd_phy_ops = { + .init = exynos7870_usbdrd_phy_init, + .exit = exynos7870_usbdrd_phy_exit, + .power_on = exynos5_usbdrd_phy_power_on, + .power_off = exynos5_usbdrd_phy_power_off, + .owner = THIS_MODULE, +}; + +static void exynos2200_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + /* Configure non-Samsung IP PHY, responsible for UTMI */ + phy_init(phy_drd->hs_phy); +} + +static void exynos2200_usbdrd_link_init(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + + /* + * Disable HWACG (hardware auto clock gating control). This will force + * QACTIVE signal in Q-Channel interface to HIGH level, to make sure + * the PHY clock is not gated by the hardware. + */ + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + reg |= LINKCTRL_FORCE_QACT; + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + /* De-assert link reset */ + reg = readl(regs_base + EXYNOS2200_DRD_CLKRST); + reg &= ~CLKRST_LINK_SW_RST; + writel(reg, regs_base + EXYNOS2200_DRD_CLKRST); + + /* Set link VBUS Valid */ + reg = readl(regs_base + EXYNOS2200_DRD_UTMI); + reg |= EXYNOS2200_UTMI_FORCE_BVALID | EXYNOS2200_UTMI_FORCE_VBUSVALID; + writel(reg, regs_base + EXYNOS2200_DRD_UTMI); +} + +static void +exynos2200_usbdrd_link_attach_detach_pipe3_phy(struct phy_usb_instance *inst) +{ + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + /* force pipe3 signal for link */ + reg &= ~LINKCTRL_FORCE_PHYSTATUS; + reg |= LINKCTRL_FORCE_PIPE_EN | LINKCTRL_FORCE_RXELECIDLE; + } else { + /* disable forcing pipe interface */ + reg &= ~LINKCTRL_FORCE_PIPE_EN; + } + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + reg = readl(regs_base + EXYNOS2200_DRD_HSP_MISC); + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + /* calibrate only eUSB phy */ + reg |= FIELD_PREP(HSP_MISC_RES_TUNE, RES_TUNE_PHY1); + reg |= HSP_MISC_SET_REQ_IN2; + } else { + /* calibrate for dual phy */ + reg |= FIELD_PREP(HSP_MISC_RES_TUNE, RES_TUNE_PHY1_PHY2); + reg &= ~HSP_MISC_SET_REQ_IN2; + } + writel(reg, regs_base + EXYNOS2200_DRD_HSP_MISC); + + reg = readl(regs_base + EXYNOS2200_DRD_CLKRST); + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) + reg &= ~EXYNOS2200_CLKRST_LINK_PCLK_SEL; + else + reg |= EXYNOS2200_CLKRST_LINK_PCLK_SEL; + + writel(reg, regs_base + EXYNOS2200_DRD_CLKRST); +} + +static int exynos2200_usbdrd_phy_init(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + /* Power-on PHY ... */ + ret = regulator_bulk_enable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); + if (ret) { + dev_err(phy_drd->dev, + "Failed to enable PHY regulator(s)\n"); + return ret; + } + } + /* + * ... and ungate power via PMU. Without this here, we get an SError + * trying to access PMA registers + */ + exynos5_usbdrd_phy_isol(inst, false); + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + /* Set up the link controller */ + exynos2200_usbdrd_link_init(phy_drd); + + /* UTMI or PIPE3 link preparation */ + exynos2200_usbdrd_link_attach_detach_pipe3_phy(inst); + + /* UTMI or PIPE3 specific init */ + inst->phy_cfg->phy_init(phy_drd); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static int exynos2200_usbdrd_phy_exit(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + int ret; + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + reg = readl(regs_base + EXYNOS2200_DRD_UTMI); + reg &= ~(EXYNOS2200_UTMI_FORCE_BVALID | EXYNOS2200_UTMI_FORCE_VBUSVALID); + writel(reg, regs_base + EXYNOS2200_DRD_UTMI); + + reg = readl(regs_base + EXYNOS2200_DRD_CLKRST); + reg |= CLKRST_LINK_SW_RST; + writel(reg, regs_base + EXYNOS2200_DRD_CLKRST); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + exynos5_usbdrd_phy_isol(inst, true); + return regulator_bulk_disable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); +} + +static const struct phy_ops exynos2200_usbdrd_phy_ops = { + .init = exynos2200_usbdrd_phy_init, + .exit = exynos2200_usbdrd_phy_exit, + .owner = THIS_MODULE, +}; + static void exynos5_usbdrd_usb_v3p1_pipe_override(struct exynos5_usbdrd_phy *phy_drd) { @@ -1134,7 +1504,7 @@ static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) /* Set VBUS Valid and D+ pull-up control by VBUS pad usage */ reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); - reg |= LINKCTRL_BUS_FILTER_BYPASS(0xf); + reg |= FIELD_PREP(LINKCTRL_BUS_FILTER_BYPASS, 0xf); writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); if (!phy_drd->sw) { @@ -1384,27 +1754,37 @@ static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd) return dev_err_probe(phy_drd->dev, ret, "failed to get phy core clock(s)\n"); - ref_clk = NULL; - for (int i = 0; i < phy_drd->drv_data->n_core_clks; ++i) { - if (!strcmp(phy_drd->core_clks[i].id, "ref")) { - ref_clk = phy_drd->core_clks[i].clk; - break; + if (phy_drd->drv_data->n_core_clks) { + ref_clk = NULL; + for (int i = 0; i < phy_drd->drv_data->n_core_clks; ++i) { + if (!strcmp(phy_drd->core_clks[i].id, "ref")) { + ref_clk = phy_drd->core_clks[i].clk; + break; + } } - } - if (!ref_clk) - return dev_err_probe(phy_drd->dev, -ENODEV, - "failed to find phy reference clock\n"); + if (!ref_clk) + return dev_err_probe(phy_drd->dev, -ENODEV, + "failed to find phy reference clock\n"); - ref_rate = clk_get_rate(ref_clk); - ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk); - if (ret) - return dev_err_probe(phy_drd->dev, ret, - "clock rate (%ld) not supported\n", - ref_rate); + ref_rate = clk_get_rate(ref_clk); + ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk); + if (ret) + return dev_err_probe(phy_drd->dev, ret, + "clock rate (%ld) not supported\n", + ref_rate); + } return 0; } +static const struct exynos5_usbdrd_phy_config phy_cfg_exynos2200[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos2200_usbdrd_utmi_init, + }, +}; + static int exynos5_usbdrd_orien_sw_set(struct typec_switch_dev *sw, enum typec_orientation orientation) { @@ -1501,6 +1881,14 @@ static const struct exynos5_usbdrd_phy_config phy_cfg_exynos5[] = { }, }; +static const struct exynos5_usbdrd_phy_config phy_cfg_exynos7870[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos7870_usbdrd_phy_isol, + .phy_init = exynos7870_usbdrd_utmi_init, + }, +}; + static const struct exynos5_usbdrd_phy_config phy_cfg_exynos850[] = { { .id = EXYNOS5_DRDPHY_UTMI, @@ -1509,6 +1897,30 @@ static const struct exynos5_usbdrd_phy_config phy_cfg_exynos850[] = { }, }; +static +const struct exynos5_usbdrd_phy_tuning exynos7870_tunes_utmi_postinit[] = { + PHY_TUNING_ENTRY_PHY(EXYNOS5_DRD_PHYPARAM0, + (PHYPARAM0_TXVREFTUNE | PHYPARAM0_TXRISETUNE | + PHYPARAM0_TXRESTUNE | PHYPARAM0_TXPREEMPPULSETUNE | + PHYPARAM0_TXPREEMPAMPTUNE | PHYPARAM0_TXHSXVTUNE | + PHYPARAM0_TXFSLSTUNE | PHYPARAM0_SQRXTUNE | + PHYPARAM0_OTGTUNE | PHYPARAM0_COMPDISTUNE), + (FIELD_PREP_CONST(PHYPARAM0_TXVREFTUNE, 14) | + FIELD_PREP_CONST(PHYPARAM0_TXRISETUNE, 1) | + FIELD_PREP_CONST(PHYPARAM0_TXRESTUNE, 3) | + FIELD_PREP_CONST(PHYPARAM0_TXPREEMPAMPTUNE, 0) | + FIELD_PREP_CONST(PHYPARAM0_TXHSXVTUNE, 0) | + FIELD_PREP_CONST(PHYPARAM0_TXFSLSTUNE, 3) | + FIELD_PREP_CONST(PHYPARAM0_SQRXTUNE, 6) | + FIELD_PREP_CONST(PHYPARAM0_OTGTUNE, 2) | + FIELD_PREP_CONST(PHYPARAM0_COMPDISTUNE, 3))), + PHY_TUNING_ENTRY_LAST +}; + +static const struct exynos5_usbdrd_phy_tuning *exynos7870_tunes[PTS_MAX] = { + [PTS_UTMI_POSTINIT] = exynos7870_tunes_utmi_postinit, +}; + static const char * const exynos5_clk_names[] = { "phy", }; @@ -1525,6 +1937,19 @@ static const char * const exynos5_regulator_names[] = { "vbus", "vbus-boost", }; +static const struct exynos5_usbdrd_phy_drvdata exynos2200_usb32drd_phy = { + .phy_cfg = phy_cfg_exynos2200, + .phy_ops = &exynos2200_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS2200_PHY_CTRL_USB20, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + /* clocks and regulators are specific to the underlying PHY blocks */ + .core_clk_names = NULL, + .n_core_clks = 0, + .regulator_names = NULL, + .n_regulators = 0, +}; + static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = { .phy_cfg = phy_cfg_exynos5, .phy_ops = &exynos5_usbdrd_phy_ops, @@ -1575,6 +2000,19 @@ static const struct exynos5_usbdrd_phy_drvdata exynos7_usbdrd_phy = { .n_regulators = ARRAY_SIZE(exynos5_regulator_names), }; +static const struct exynos5_usbdrd_phy_drvdata exynos7870_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos7870, + .phy_tunes = exynos7870_tunes, + .phy_ops = &exynos7870_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), +}; + static const struct exynos5_usbdrd_phy_drvdata exynos850_usbdrd_phy = { .phy_cfg = phy_cfg_exynos850, .phy_ops = &exynos850_usbdrd_phy_ops, @@ -1770,6 +2208,9 @@ static const struct of_device_id exynos5_usbdrd_phy_of_match[] = { .compatible = "google,gs101-usb31drd-phy", .data = &gs101_usbd31rd_phy }, { + .compatible = "samsung,exynos2200-usb32drd-phy", + .data = &exynos2200_usb32drd_phy, + }, { .compatible = "samsung,exynos5250-usbdrd-phy", .data = &exynos5250_usbdrd_phy }, { @@ -1782,6 +2223,9 @@ static const struct of_device_id exynos5_usbdrd_phy_of_match[] = { .compatible = "samsung,exynos7-usbdrd-phy", .data = &exynos7_usbdrd_phy }, { + .compatible = "samsung,exynos7870-usbdrd-phy", + .data = &exynos7870_usbdrd_phy + }, { .compatible = "samsung,exynos850-usbdrd-phy", .data = &exynos850_usbdrd_phy }, @@ -1841,6 +2285,17 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) return PTR_ERR(phy_drd->reg_phy); } + /* + * USB32DRD 4nm controller implements Synopsys eUSB2.0 PHY + * and Synopsys SS/USBDP COMBOPHY, managed by external code. + */ + if (of_property_present(dev->of_node, "phy-names")) { + phy_drd->hs_phy = devm_of_phy_get(dev, dev->of_node, "hs"); + if (IS_ERR(phy_drd->hs_phy)) + return dev_err_probe(dev, PTR_ERR(phy_drd->hs_phy), + "failed to get hs_phy\n"); + } + ret = exynos5_usbdrd_phy_clk_handle(phy_drd); if (ret) return ret; diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig index f30cfb42b21033..342fb736da4b1d 100644 --- a/drivers/phy/tegra/Kconfig +++ b/drivers/phy/tegra/Kconfig @@ -13,7 +13,7 @@ config PHY_TEGRA_XUSB config PHY_TEGRA194_P2U tristate "NVIDIA Tegra194 PIPE2UPHY PHY driver" - depends on ARCH_TEGRA_194_SOC || ARCH_TEGRA_234_SOC || COMPILE_TEST + depends on ARCH_TEGRA || COMPILE_TEST select GENERIC_PHY help Enable this to support the P2U (PIPE to UPHY) that is part of Tegra 19x diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c index 05a4a59f7c407f..fe6b4925d16621 100644 --- a/drivers/phy/xilinx/phy-zynqmp.c +++ b/drivers/phy/xilinx/phy-zynqmp.c @@ -222,7 +222,6 @@ struct xpsgtr_phy { * @siou: siou base address * @gtr_mutex: mutex for locking * @phys: PHY lanes - * @refclk_sscs: spread spectrum settings for the reference clocks * @clk: reference clocks * @tx_term_fix: fix for GT issue * @saved_icm_cfg0: stored value of ICM CFG0 register @@ -235,7 +234,6 @@ struct xpsgtr_dev { void __iomem *siou; struct mutex gtr_mutex; /* mutex for locking */ struct xpsgtr_phy phys[NUM_LANES]; - const struct xpsgtr_ssc *refclk_sscs[NUM_LANES]; struct clk *clk[NUM_LANES]; bool tx_term_fix; unsigned int saved_icm_cfg0; @@ -398,13 +396,40 @@ got_phy: return ret; } +/* Get the spread spectrum (SSC) settings for the reference clock rate */ +static const struct xpsgtr_ssc *xpsgtr_find_sscs(struct xpsgtr_phy *gtr_phy) +{ + unsigned long rate; + struct clk *clk; + unsigned int i; + + clk = gtr_phy->dev->clk[gtr_phy->refclk]; + rate = clk_get_rate(clk); + + for (i = 0 ; i < ARRAY_SIZE(ssc_lookup); i++) { + /* Allow an error of 100 ppm */ + unsigned long error = ssc_lookup[i].refclk_rate / 10000; + + if (abs(rate - ssc_lookup[i].refclk_rate) < error) + return &ssc_lookup[i]; + } + + dev_err(gtr_phy->dev->dev, "Invalid rate %lu for reference clock %u\n", + rate, gtr_phy->refclk); + + return NULL; +} + /* Configure PLL and spread-sprectrum clock. */ -static void xpsgtr_configure_pll(struct xpsgtr_phy *gtr_phy) +static int xpsgtr_configure_pll(struct xpsgtr_phy *gtr_phy) { const struct xpsgtr_ssc *ssc; u32 step_size; - ssc = gtr_phy->dev->refclk_sscs[gtr_phy->refclk]; + ssc = xpsgtr_find_sscs(gtr_phy); + if (!ssc) + return -EINVAL; + step_size = ssc->step_size; xpsgtr_clr_set(gtr_phy->dev, PLL_REF_SEL(gtr_phy->lane), @@ -446,6 +471,8 @@ static void xpsgtr_configure_pll(struct xpsgtr_phy *gtr_phy) xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_3_MSB, STEP_SIZE_3_MASK, (step_size & STEP_SIZE_3_MASK) | FORCE_STEP_SIZE | FORCE_STEPS); + + return 0; } /* Configure the lane protocol. */ @@ -658,7 +685,10 @@ static int xpsgtr_phy_init(struct phy *phy) * Configure the PLL, the lane protocol, and perform protocol-specific * initialization. */ - xpsgtr_configure_pll(gtr_phy); + ret = xpsgtr_configure_pll(gtr_phy); + if (ret) + goto out; + xpsgtr_lane_set_protocol(gtr_phy); switch (gtr_phy->protocol) { @@ -823,8 +853,7 @@ static struct phy *xpsgtr_xlate(struct device *dev, } refclk = args->args[3]; - if (refclk >= ARRAY_SIZE(gtr_dev->refclk_sscs) || - !gtr_dev->refclk_sscs[refclk]) { + if (refclk >= ARRAY_SIZE(gtr_dev->clk)) { dev_err(dev, "Invalid reference clock number %u\n", refclk); return ERR_PTR(-EINVAL); } @@ -928,9 +957,7 @@ static int xpsgtr_get_ref_clocks(struct xpsgtr_dev *gtr_dev) { unsigned int refclk; - for (refclk = 0; refclk < ARRAY_SIZE(gtr_dev->refclk_sscs); ++refclk) { - unsigned long rate; - unsigned int i; + for (refclk = 0; refclk < ARRAY_SIZE(gtr_dev->clk); ++refclk) { struct clk *clk; char name[8]; @@ -946,29 +973,6 @@ static int xpsgtr_get_ref_clocks(struct xpsgtr_dev *gtr_dev) continue; gtr_dev->clk[refclk] = clk; - - /* - * Get the spread spectrum (SSC) settings for the reference - * clock rate. - */ - rate = clk_get_rate(clk); - - for (i = 0 ; i < ARRAY_SIZE(ssc_lookup); i++) { - /* Allow an error of 100 ppm */ - unsigned long error = ssc_lookup[i].refclk_rate / 10000; - - if (abs(rate - ssc_lookup[i].refclk_rate) < error) { - gtr_dev->refclk_sscs[refclk] = &ssc_lookup[i]; - break; - } - } - - if (i == ARRAY_SIZE(ssc_lookup)) { - dev_err(gtr_dev->dev, - "Invalid rate %lu for reference clock %u\n", - rate, refclk); - return -EINVAL; - } } return 0; diff --git a/include/linux/phy/phy-hdmi.h b/include/linux/phy/phy-hdmi.h new file mode 100644 index 00000000000000..f0ec963c6e84f1 --- /dev/null +++ b/include/linux/phy/phy-hdmi.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2022,2024 NXP + */ + +#ifndef __PHY_HDMI_H_ +#define __PHY_HDMI_H_ + +/** + * struct phy_configure_opts_hdmi - HDMI configuration set + * @tmds_char_rate: HDMI TMDS Character Rate in Hertz. + * @bpc: Bits per color channel. + * + * This structure is used to represent the configuration state of a HDMI phy. + */ +struct phy_configure_opts_hdmi { + unsigned long long tmds_char_rate; + unsigned int bpc; +}; + +#endif /* __PHY_HDMI_H_ */ diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index e63e6e70e86042..437769e061b703 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -17,6 +17,7 @@ #include <linux/regulator/consumer.h> #include <linux/phy/phy-dp.h> +#include <linux/phy/phy-hdmi.h> #include <linux/phy/phy-lvds.h> #include <linux/phy/phy-mipi-dphy.h> @@ -42,7 +43,8 @@ enum phy_mode { PHY_MODE_MIPI_DPHY, PHY_MODE_SATA, PHY_MODE_LVDS, - PHY_MODE_DP + PHY_MODE_DP, + PHY_MODE_HDMI, }; enum phy_media { @@ -60,11 +62,14 @@ enum phy_media { * the DisplayPort protocol. * @lvds: Configuration set applicable for phys supporting * the LVDS phy mode. + * @hdmi: Configuration set applicable for phys supporting + * the HDMI phy mode. */ union phy_configure_opts { struct phy_configure_opts_mipi_dphy mipi_dphy; struct phy_configure_opts_dp dp; struct phy_configure_opts_lvds lvds; + struct phy_configure_opts_hdmi hdmi; }; /** diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h index 0d5a17ea8fb81b..1a2c0e0838f998 100644 --- a/include/linux/soc/samsung/exynos-regs-pmu.h +++ b/include/linux/soc/samsung/exynos-regs-pmu.h @@ -55,6 +55,8 @@ #define EXYNOS4_MIPI_PHY_SRESETN (1 << 1) #define EXYNOS4_MIPI_PHY_MRESETN (1 << 2) #define EXYNOS4_MIPI_PHY_RESET_MASK (3 << 1) +/* USB PHY enable bit, valid for Exynos7870 */ +#define EXYNOS7870_USB2PHY_ENABLE (1 << 1) #define S5P_INFORM0 0x0800 #define S5P_INFORM1 0x0804 @@ -185,6 +187,9 @@ /* Only for S5Pv210 */ #define S5PV210_EINT_WAKEUP_MASK 0xC004 +/* Only for Exynos2200 */ +#define EXYNOS2200_PHY_CTRL_USB20 0x72C + /* Only for Exynos4210 */ #define S5P_CMU_CLKSTOP_LCD1_LOWPWR 0x1154 #define S5P_CMU_RESET_LCD1_LOWPWR 0x1174 |