| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks"
* tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits)
usb: ucsi: huawei_gaokun: support mode switching
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling
usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro
usb: xhci: allocate internal DCBAA mirror dynamically
usb: xhci: allocate DCBAA based on host controller max slots
usb: xhci: refactor DCBAA struct
xhci: Prevent queuing new commands if xhci is inaccessible
xhci: dbc: detect and recover hung DbC during enumeraton
xhci: dbc: add timestamps to DbC state changes in a new helper.
xhci: dbc: add helper to set and clear DbC DCE enable bit
xhci: dbc: serialize enabling and disabling dbc
xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states
usb: xhci: Improve Soft Retries after short transfers
usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling
usb: xhci: Remove skip_isoc_td()
usb: xhci: Simplify xhci_quiesce()
usb: xhci: remove legacy 'num_trbs_free' tracking
usb: xhci: fix typo in xhci_set_port_power() comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "taskstats: fix TGID dead-thread stat retention" (Yiyang Chen)
Fix a taskstats TGID aggregation bug where fields added in the TGID
query path were not preserved after thread exit, and adds a kselftest
covering the regression.
- "lib/tests: string_helpers: Slight improvements" (Andy Shevchenko)
Improve lib/tests/string_helpers_kunit.c a little
- "lib/base64: decode fixes" (Josh Law)
Address minor issues in lib/base64.c
- "selftests/filelock: Make output more kselftestish" (Mark Brown)
Make the output from the ofdlocks test a bit easier for tooling to
work with. Also ignore the generated file
- "uaccess: unify inline vs outline copy_{from,to}_user() selection"
(Yury Norov)
Simplify the usercopy code by removing the selectability of inlining
copy_{from,to}_user().
- "ocfs2: validate inline xattr header consumers" (ZhengYuan Huang)
Fix a number of possible issues in the ocfs2 xattr code
- "lib and lib/cmdline enhancements" (Dmitry Antipov)
Provide additional robustness checking in the cmdline handling code
and its in-kernel testing and selftests
- "cleanup the RAID6 P/Q library" (Christoph Hellwig)
Clean up the RAID6 P/Q library to match the recent updates to the
RAID 5 XOR library and other CRC/crypto libraries
- "ocfs2: harden inode validators against forged metadata" (Michael
Bommarito)
Add three structural checks to OCFS2 dinode validation so malformed
on-disk fields are rejected before ocfs2_populate_inode() copies them
into the in-core inode
- "lib/raid: replace __get_free_pages() call with kmalloc()" (Mike
Rapoport)
Clean up the lib/raid code by using kmalloc() in more places
* tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (108 commits)
ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
lib: interval_tree_test: validate benchmark parameters
ocfs2: avoid moving extents to occupied clusters
treewide: fix transposed "sign" typos and update spelling.txt
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
fat: reject BPB volumes whose data area starts beyond total sectors
selftests/uevent: increase __UEVENT_BUFFER_SIZE to avoid ENOBUFS on busy systems
lib/test_firmware: allocate the configured into_buf size
fs: efs: remove unneeded debug prints
checkpatch: cuppress warnings when Reported-by: is followed by Link:
MAINTAINERS: add Alexander as a kcov reviewer
mailmap: update Alexander Sverdlin's Email addresses
fs: fat: inode: replace sprintf() with scnprintf()
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
ocfs2: fix race between ocfs2_control_install_private() and ocfs2_control_release()
ocfs2/dlm: require a ref for locking_state debugfs open
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2: validate fast symlink target during inode read
ocfs2: add journal NULL check in ocfs2_checkpoint_inode()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
Rust:
- ACPI:
Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device private
data beyond the driver's own scope, creating ordering constraints
and forcing the data to outlive all registrations that access it.
Registration data is instead scoped structurally to the
Registration object, making lifecycle ordering enforced by
construction rather than convention.
- Rust-native device driver lifetimes (HRT):
Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly in
the driver's bus device private data with a lifetime bounded by the
binding scope, so the compiler enforces at build time that they do
not outlive the binding. This removes Devres indirection from every
access site and eliminates try_access() failure paths in
destructors.
Bus driver traits use a Generic Associated Type (GAT) Data<'bound>
to introduce the lifetime on the private data, rather than
parameterizing the Driver trait itself. Auxiliary registration
data, where the lifetime is not introduced by a trait callback but
must be threaded through Registration, uses the ForLt trait (a
type-level abstraction for types generic over a lifetime).
Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class"
* tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core: (81 commits)
software node: allow passing reference args to PROPERTY_ENTRY_REF()
driver core: platform: set mod_name in driver registration
coresight: pass THIS_MODULE implicitly through a macro
kernel: param: initialize module_kset in a pure_initcall
soc/tegra: cbb: Move driver registration from pure_initcall to core_initcall
firmware_loader: Fix recursive lock in device_cache_fw_images()
driver core: Use system_percpu_wq instead of system_wq
driver core: remove driver_set_override()
rpmsg: use generic driver_override infrastructure
Drivers: hv: vmbus: use generic driver_override infrastructure
cdx: use generic driver_override infrastructure
amba: use generic driver_override infrastructure
rust: devres: add 'static bound to Devres<T>
samples: rust: rust_driver_auxiliary: showcase lifetime-bound registration data
rust: auxiliary: generalize Registration over ForLt
rust: types: add `ForLt` trait for higher-ranked lifetime support
gpu: nova-core: separate driver type from driver data
samples: rust: rust_driver_pci: use HRT lifetime for Bar
rust: io: make IoMem and ExclusiveIoMem lifetime-parameterized
rust: pci: make Bar lifetime-parameterized
...
|
|
The USB PHY (QMP Combo PHY) is always initialized in USB3+DP mode. In
the past, there was no MUX, and it was unnecessary to set it, since
MSM only supported 2-lane DP. But now, MST and 4-lane DP support has
been added to MSM, and a MUX has been added to the PHY. To support
4-lane DP and mode switching for gaokun, get the MUX and set it.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260607101844.820064-1-mitltlatltl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial updates for 7.2-rc1
Here are the USB serial updates for 7.2-rc1, including:
- an updated mxuport number-of-ports encoding, and
- include directive cleanups
Everything has been in linux-next with no reported issues.
* tag 'usb-serial-7.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: whiteheat: drop termbits include
USB: serial: add missing atomic includes
USB: serial: garmin_gps: drop unused atomic include
USB: serial: drop unused moduleparam includes
USB: serial: drop unused uaccess includes
USB: serial: xr: add missing uaccess include
USB: serial: drop unused tty_flip includes
USB: serial: drop unused tty_driver includes
USB: serial: mxuport: update number-of-ports encoding
|
|
Avoid string function that are due to be deprecated.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20260608095523.2606-36-david.laight.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
klsi_105_prepare_write_buffer() is called by the generic write path
with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It
stores a two-byte length header at the start of the buffer and copies
the payload from the write fifo starting at buf + KLSI_HDR_LEN, but
passes the full buffer size as the number of bytes to copy:
count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN,
size, &port->lock);
When the fifo holds at least size bytes, size bytes are copied starting
two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its
end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for
the header as safe_serial already does.
Writing bulk_out_size or more bytes to the tty triggers a slab
out-of-bounds write, observed with KASAN by emulating the device with
dummy_hcd and raw-gadget:
BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0
Write of size 64 at addr ffff888112c62202 by task python3
kfifo_copy_out
klsi_105_prepare_write_buffer [kl5kusb105]
usb_serial_generic_write_start [usbserial]
Allocated by task 139:
usb_serial_probe [usbserial]
The buggy address is located 2 bytes inside of allocated 64-byte region
The out-of-bounds write no longer occurs with this change applied.
Fixes: 60b3013cdaf3 ("USB: kl5usb105: reimplement using generic framework")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add support for Dell DW5826e-m with USB-id 0x413c:0x81ea
T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=413c ProdID=81ea Rev= 5.04
S: Manufacturer=DELL
S: Product=DW5826e-m Qualcomm Snapdragon X12 Global LTE-A
S: SerialNumber=358988870177734
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#=12 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I:* If#=12 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#=13 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#=13 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Jack Wu <jackbb_wu@compal.com>
Reviewed-by: Lars Melin <larsm17@gmail>
Cc: stable@vger.kernel.org
[ johan: reserve also interface 4 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Currently, R-Car Gen2 and Gen3 share the same .plat_start() callback.
However, this single callback performs different operations, after
checking the XHCI's controller compatible value.
Avoid repeated checking of compatible values and reduce kernel size by
splitting this method in two separate functions. Update
xhci_rcar_resume_quirk() to dispatch to the correct method by calling it
through the .plat_start() function pointer, too.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/d1ee4e1bb9106f8251b061b52948434d560b4675.1780499433.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The SET_XHCI_PLAT_PRIV_FOR_RCAR() macro does not add much value (there
are only two users), and stands in the way of handling differences
between R-Car Gen2 and Gen3. Remove it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/a7083c3c822837556b91d845bd449c099db64769.1780499433.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allocate the internal virtual device array dynamically based on the
maximum number of slots reported by the host controller. Previously,
the array was always allocated to the absolute maximum of 255 entries.
Repurpose the 'MAX_HC_SLOTS' macro to limit the number of enabled slots.
This mirrors how the maximum number of ports and interrupters are handled.
The allocation now uses kcalloc_node(), which zeroes the memory
automatically, making the explicit memset() call unnecessary.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-16-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allocate the Device Context Base Address Array (DCBAA) according to the
maximum number of device slots supported by the host controller, instead
of always allocating the absolute maximum of 255 entries.
The xHCI specification defines the DCBAA size as (MaxSlotsEnabled + 1)
entries. In the xhci driver there is currently no distinction between
MaxSlots and MaxSlotsEnabled, as all available slots are enabled during
initialization. As a result, 'max_slots' effectively represents both
values.
This change allows the xHCI driver to respect custom slot limits, reduces
unnecessary memory usage, and removes the obsolete "TODO" comment.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-15-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Embed the 'xhci_device_context_array' structure directly within 'xhci_hcd'
instead of allocating it as a separate block. Only the array of device
context addresses is now allocated separately.
Since the device context addresses are no longer part of an array
structure, rename 'dev_context_ptrs' to 'ctx_array' for clearer access
semantics.
Also remove the redundant comment next to the 'ctx_array' allocation;
using dma_alloc_coherent() for 64-bit * N allocations guarantees both
physically contiguous and properly aligned for 64-byte boundaries.
The xHCI section (5.4.6) refers to DCBAAP instead of DCBAA (6.1).
This change does not modify the number of host controller slots but
simplifies memory management and prepares the driver for a variable number
of HC slots in the future.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-14-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Refuse to queue a new command on the command ring if xHC is marked
inaccessible with the HCD_FLAG_HW_ACCESSIBLE.
HCD_FLAG_HW_ACCESSIBLE is set and cleared in suspend and resume.
Also print a warning if xhci is being suspended with commands
still pending on the command ring.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-13-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a timeout between the detection of the debug host connection and
the DbC Run transition to ‘1’. Toggle the DCE bit to re-enable DbC in
order to retry the debug device enumeration process if the DbC run
transition takes too long.
Set the timeout to 2 seconds
See xhci specification section 7.6.4.1 "Debug Capability Initialization"
Also detect cable disconnect during enable and connected state.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The timestamp helps us track when a state changed the last time.
It allows us to detect if DbC is stuck in connected state for too long,
and can later be used to enable runtime suspend if there is no activity
for some time
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-11-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add xhci_dbc_enable_dce() helper to enable or disable DbC by manipulating
DCE bit correctly. It will be used for stuck DbC recovery attempts in
addition to normal DbC enable and disable functionality
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DbC can be enabled and disabled via sysfs, serialize those
with a mutex to make sure everything is done in the correct
order.
remove xhci_do_dbc_stop() and integrate the register write and
dbc->state setting into xhci_do_stop()
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A short transfer is a successful one, so reset the error count.
Otherwise, endpoints which always complete short are limited to
three retries per endpoint life rather than per URB.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This URB flag was never supposed to have any effect on isoc endpoints.
No kernel code uses the flag except usb_sg_init(), on non-isoc only.
USBFS can't use it on isoc because proc_do_submiturb() rejects it.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This function is pointless because usb_submit_urb() initializes all
isoc frame descriptors to -EXDEV and 0 length so that HCDs don't need
to do anything with transfers which were never executed.
Other HCDs rely on this (e.g. EHCI itd_complete()), so we can too.
This gets rid of a potentially dangereous function which could corrupt
memory if we weren't super careful to only call it on isoc URBs.
Also, set status to 0 rather than any random status determined by the
later TD which caused skipping. This status will be ignored anyway.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function reads USBCMD, clears some bits and writes it back.
Its treatment of the Run bit is weird: the bit is usually written
as 0, as we would expect, but it may also be written as 1 if both
its current value and USBSTS.HCHalted are observed as 1.
Per xHCI 5.4.2, HCHalted is 0 whenever Run is 1, so the above can
only happen due to buggy HW or SW, e.g. concurrent xhci_quiesce()
and xhci_start() execution.
It's unclear why we should treat such cases specially and write
the bit as 1. The logic comes from original PoC implementation
and has never been explained. Just write 0 every time, which
looks like the safer choice when the intent is to stop the xHC.
We could get in trouble if clearing Run causes some very broken
xHC to start running after it was halted, but no such case has
been documented. It seems the logic was just poorly thought out.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Keeping track of free TRBs in a ring by adding and subtracting each time
a enqueue or dequeue pointer is modified has proven to be buggy and
complicated, especially over long periods of time.
The xhci driver has already moved to calculating free TRBs dynamically
based on ring size and the enqueue/dequeue positions.
The DbC path is the last user of 'num_trbs_free'. Rather than maintaining
two separate accounting mechanisms, remove the field entirely and switch
DbC to use xhci_num_trbs_free(). Since 'num_trbs_free' undercounts by one,
and xhci_num_trbs_free() does not, the check for sufficient free TRBs is
adjusted.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix a spelling mistake (re-aquire -> re-acquire) in the function
header comment.
No functional change.
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
build_i2c_fw_hdr() allocates a fixed-size buffer of
(16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then
copies le16_to_cpu(img_header->Length) bytes into it without
validating that Length fits within the available space after the
firmware record header.
img_header->Length is a __le16 from the firmware file and can be
up to 65535. check_fw_sanity() validates the total firmware size
but not img_header->Length specifically.
Fix by rejecting images where img_header->Length exceeds the
available destination space.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Korwel <adriank20047@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the
device I2C EEPROM into a buffer allocated with kmalloc_obj(), which
is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes.
The Size field comes from the device and is only validated (in
check_i2c_image()) to make sure the descriptor fits within
TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size.
A malicious USB device can therefore set Size to any value up to 16377,
causing a heap overflow of up to 16367 bytes when plugged into a host
running this driver.
valid_csum() is called after read_rom() and also iterates
buffer[0..Size-1], compounding the out-of-bounds access.
Fix by rejecting descriptors with unexpected length before calling
read_rom().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Korwel <adriank20047@gmail.com>
[ johan: amend commit message; also check for short descriptors ]
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
We need the USB and Thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Store common handle IDs in "struct kcov_common_handle_id", which consumes
no space in non-KCOV builds.
This cleanup removes #ifdef boilerplate code from subsystems that
integrate with KCOV (in particular in usbip_common.h and skbuff.h, see the
diffstat).
This should also make it easier to add KCOV remote coverage to more
subsystems in the future.
Link: https://lore.kernel.org/20260430-kcov-refactor-common-handle-v1-1-23a0c7a0ba38@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Hongren (Zenithal) Zheng <i@zenithal.me>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently the kernel relies on a global variable to reference the PMC
context. Use an explicit lookup for the PMC and pass that to the public
PMC APIs.
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial fixes for 7.1-rc5
Here are a number of fixes for memory corruption and information leaks
due to missing endpoint and transfer sanity checks dating back to
simpler times when we trusted our hardware.
Included are also a fix for a recently added modem device id entry and
some new modem devices ids.
All but the last five commits have been in linux-next and with no
reported issues.
* tag 'usb-serial-7.1-rc5' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: cypress_m8: validate interrupt packet headers
USB: serial: safe_serial: fix memory corruption with small endpoint
USB: serial: omninet: fix memory corruption with small endpoint
USB: serial: mxuport: fix memory corruption with small endpoint
USB: serial: cypress_m8: fix memory corruption with small endpoint
USB: serial: option: add missing RSVD(5) flag for Rolling RW135R-GL
USB: serial: option: add MeiG SRM813Q
USB: serial: mct_u232: fix missing interrupt-in transfer sanity check
USB: serial: mct_u232: fix memory corruption with small endpoint
USB: serial: keyspan: fix missing indat transfer sanity check
USB: serial: digi_acceleport: fix memory corruption with small endpoints
USB: serial: belkin_sa: validate interrupt status length
|
|
cypress_read_int_callback() parses the interrupt-in buffer according to
the selected Cypress packet format. Format 1 has a two-byte status/count
header and format 2 has a one-byte combined status/count header. The
usb-serial core sizes the interrupt-in buffer from the endpoint
descriptor's wMaxPacketSize, and successful interrupt transfers can
complete short when URB_SHORT_NOT_OK is not set.
Check that the completed packet contains the selected header before
reading it. Malformed short reports are ignored and the interrupt URB is
resubmitted through the existing retry path, preventing out-of-bounds
header-byte reads.
KASAN report as below:
KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0
Read of size 1
Call trace:
cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009)
__usb_hcd_giveback_urb()
dummy_timer()
Fixes: 3416eaa1f8f8 ("USB: cypress_m8: Packet format is separate from characteristic size")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Fixes: 3416eaa1f8f8 ("USB: cypress_m8: Packet format is separate from characteristic size")
Cc: stable@vger.kernel.org # 2.6.26
[ johan: use constants in header length sanity checks ]
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Make sure that the bulk-out buffer size is at least eight bytes to avoid
user-controlled slab corruption in "safe" mode should a malicious device
report a smaller size.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Make sure that the bulk-out buffers are at least as large as the
hardcoded transfer size to avoid user-controlled slab corruption should
a malicious device report a smaller endpoint max packet size than
expected.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Make sure that the bulk-out endpoint max packet size is at least eight
bytes to avoid user-controlled slab corruption should a malicious device
report a smaller size.
Fixes: ee467a1f2066 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver")
Cc: stable@vger.kernel.org # 3.14
Cc: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Make sure that the interrupt-out endpoint max packet size is at least
eight bytes to avoid user-controlled slab corruption or NULL-pointer
dereference should a malicious device report a smaller size.
Fixes: 3416eaa1f8f8 ("USB: cypress_m8: Packet format is separate from characteristic size")
Cc: stable@vger.kernel.org # 2.6.26
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
This patch introduces support for the Cadence USBSSP (cdnsp)
controller in hardware configurations where the Dual-Role Device (DRD)
register block is not implemented or is inaccessible.
In such cases, the driver cannot rely on the DRD logic to manage roles
and must operate exclusively in a fixed peripheral/host mode.
The change in BAR indexing (from BAR 2 to BAR 1) is a direct
consequence of the 32-bit addressing used in this specific
DRD-disabled hardware layout, compared to the 64-bit addressing
used in DRD-enabled configurations.
Tested on a PCI platform with a hardware configuration that lacks
DRD support. Platform-side changes are included to support the PCI
glue layer's property injection to handle this specific layout.
Acked-by: Peter Chen <peter.chen@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605141023.18vWXyw3-lkp@intel.com/
Link: Closes: https://lore.kernel.org/oe-kbuild-all/202605141023.18vWXyw3-lkp@intel.com/
Link: https://patch.msgid.link/20260521-no_drd_config_v9-v9-2-2512cef10104@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ast_udc_ep_dequeue() declares the loop cursor `req` outside the
list_for_each_entry(). After the loop it tests `&req->req != _req`
to decide whether the request was found. If the queue holds no
match, `req` is past-the-end. It then aliases
container_of(&ep->queue, struct ast_udc_request, queue) via offset
cancellation. Whether that synthetic address equals `_req` depends
on heap layout. The function can return 0 without dequeueing
anything.
Default `rc` to -EINVAL and set it to 0 only inside the match
branch. `req` is no longer read after the loop, so the past-the-end
dereference goes away. No extra cursor variable or post-loop test
is needed.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/20260521065428.3261238-1-maoyixie.tju@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The WARN() in dwc2_hcd_save_data_toggle() was introduced in
commit 62943b7dfa35 ("usb: dwc2: host: fix the data toggle error in
full speed descriptor dma"), it looks like the WARN() is to ensure
proper usage of dwc2_hcd_save_data_toggle(): either qtd is provided
for control eps or qh is provided for non-control eps. This check is
good even if there's no such improper usage in current code. But the
WARN() usage in driver is discouraged nowadays: imagine there is an
improper usage, then kernel panic due to warn if 'panic_on_warn' is
enabled.
While emitting the err msg for improper usage is still valueable, so
let's replace the WARN with check and dev_err().
At the same time, it looks a bit strange we check !chan after
dereference of this pointer with
"if (chan->ep_type != USB_ENDPOINT_XFER_CONTROL)".
In fact, when entering the dwc2_hcd_save_data_toggle(), the chan won't
be NULL, because its caller or indirect caller has ensured this,
specifically, it's checked with below line in dwc2_hc_n_intr()
if (!chan) {
dev_err(hsotg->dev, "## hc_ptr_array for channel is NULL ##\n");
return;
}
This addresses the following issue reported by klocwork tool:
- Suspicious dereference of pointer 'chan' before NULL check at
line 518
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260520133711.14410-1-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for UCSI SET_PDOS command as per UCSI specification v2.1 and
above to debugfs.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pooja Katiyar <pooja.katiyar@intel.com>
Link: https://patch.msgid.link/e3e127122c0a6910c4840a13d5c74ab5fc4eb868.1778798352.git.pooja.katiyar@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add debugfs entry for writing message_out data structure to handle
UCSI 2.1 and 3.0 commands through debugfs interface.
Users writing to the message_out debugfs file should ensure the input
data adheres to the following format:
1. Input must be a non-empty valid hexadecimal string.
2. Input length of hexadecimal string must not exceed 256 bytes of
length to be in alignment with the message out data structure size
as per the UCSI specification v2.1.
3. If the input string length is odd, then user needs to prepend a
'0' to the first character for proper hex conversion.
Below are examples of valid hex strings. Note that these values are
just examples. The exact values depend on specific command use case.
#echo 1A2B3C4D > message_out
#echo 01234567 > message_out
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pooja Katiyar <pooja.katiyar@intel.com>
Link: https://patch.msgid.link/812820ed3caae2d9ab86e4b26022c5a36b645f86.1778798352.git.pooja.katiyar@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for UCSI message_out data structure. The UCSI
interface defines separate message_in and message_out data
structure for bidirectional communication, where commands
like Set PDOs and LPM Firmware Update require writing data
to message_out before command execution.
Add write_message_out operation to ucsi_operations structure
to allow platform drivers to implement message_out data writing
capability.
Update ucsi_sync_control_common to accept message_out parameters
and call write_message_out followed by command execution to
maintain proper sequencing as per the UCSI specification.
Introduce ucsi_write_message_out_command for commands that need
to send message_out data, while maintaining ucsi_send_command
for commands that only require message_in response data.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pooja Katiyar <pooja.katiyar@intel.com>
Link: https://patch.msgid.link/6d4e1ba7f92e713638f66925ae6389528597df6e.1778798352.git.pooja.katiyar@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Airoha SoC use the same register map and logic of the Mediatek xHCI
driver, hence add it to the dependency list to permit compilation also
on this ARCH.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20260519164903.31258-1-ansuelsmth@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Current way of specifying VBUS supply (via the device's vdd-vbus-supply
property) is not ideal. In the end, VBUS is supplied to the USB-C
connector rather than the Type-C block in the PMIC. Follow the standard
way of specifying it (via the connector node) and fallback to the old
property if there is no vbus-supply in the connector node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://patch.msgid.link/20260519-fix-tcpm-vbus-v1-2-14754695282d@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Unlike other units in this module, this one does not request interrupts
or regulator supplies. It does not use OF graph, USB role switching or
TypeC muxing APIs. Drop redundant header includes to speed up
preprocessor.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://patch.msgid.link/20260519100014.282058-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The `max3421_hub_control()` function handles USB hub class requests
to the virtual root hub. The `GetPortStatus` case correctly rejects
requests with `index != 1`, since the virtual root hub has only a
single port. However, the `ClearPortFeature` and `SetPortFeature`
cases lack the same check.
Fix this by extending the `index != 1` rejection to both cases,
matching the existing behavior of `GetPortStatus`.
Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://patch.msgid.link/20260518224901.1887013-3-eeodqql09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The `max3421_hub_control()` function handles USB hub class requests
to the virtual root hub. In the `default` branches of both the
`ClearPortFeature` and `SetPortFeature` switch statements, it modifies
`max3421_hcd->port_status` by left shifting 1 by the request's `value`
parameter. However, it does not validate whether this shift will exceed
the width of `port_status`.
So if a malicious userspace task with access to the root hub via
/dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue`
greater than or equal to 32, the left shift operation invokes
shift-out-of-bounds undefined behavior. This results in arbitrary
bit corruption of `port_status`, including the normally-immutable
change bits, which can bypass internal state checks and confuse the
hub status.
Fix this by rejecting requests whose `value` exceeds the shift width
before performing the shift.
This issue was found using a KLEE-based symbolic execution tool for
kernel drivers that I'm currently developing.
Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://patch.msgid.link/20260518224901.1887013-1-eeodqql09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Lockdep detects a possible recursive locking scenario during
ucsi init:
[ 5.418616] ============================================
[ 5.418634] WARNING: possible recursive locking detected
[ 5.418706] --------------------------------------------
[ 5.418725] kworker/4:1/82 is trying to acquire lock:
[ 5.418759] ffff888119a34648 (&con->lock){+.+.}-{3:3}, at: ucsi_init_work+0x1a78/0x2eb0 [typec_ucsi]
[ 5.418801]
but task is already holding lock:
[ 5.418835] ffff888119a34080 (&con->lock){+.+.}-{3:3}, at: ucsi_init_work+0x1a78/0x2eb0 [typec_ucsi]
[ 5.418884]
other info that might help us debug this:
[ 5.418904] Possible unsafe locking scenario:
[ 5.418937] CPU0
[ 5.418956] ----
[ 5.418991] lock(&con->lock);
[ 5.419013] lock(&con->lock);
[ 5.419033]
*** DEADLOCK ***
[ 5.419387] Call Trace:
[ 5.419406] <TASK>
[ 5.419425] dump_stack_lvl+0x61/0xa0
[ 5.419448] print_deadlock_bug+0x4a6/0x650
[ 5.419483] __lock_acquire+0x62b6/0x7f50
[ 5.419507] lock_acquire+0x11b/0x390
[ 5.419654] __mutex_lock+0xbc/0xcd0
[ 5.419741] ucsi_init_work+0x1a78/0x2eb0
[ 5.419785] ? worker_thread+0xf53/0x2bc0
[ 5.419819] worker_thread+0xff4/0x2bc0
[ 5.419842] kthread+0x2a7/0x330
[ 5.419863] ? __pfx_worker_thread+0x10/0x10
[ 5.419896] ? __pfx_kthread+0x10/0x10
[ 5.419916] ret_from_fork+0x38/0x70
[ 5.419936] ? __pfx_kthread+0x10/0x10
[ 5.419969] ret_from_fork_asm+0x1b/0x30
[ 5.419991] </TASK>
[ 5.420009] ---[ end trace 0000000000000000 ]---
The problem is that all connector locks belong to the same
lockdep lock class, so the following loop:
for (i = 0; i < ucsi->cap.num_connectors; i++)
ucsi_register_port(connector[i])
mutex_lock(&connector[i]->lock)
looks like a recursive acquire of the same mutex. Put each connector
lock into a dedicated lock class so that lockdep doesn't see it as a
possible recursion.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260515060042.136083-1-senozhatsky@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The INGENIC 17EF:6161 touchscreen composite device has a ~55-second
watchdog that resets the USB device if the bulk-IN endpoint on the CDC
data interface goes unread. The existing ALWAYS_POLL_CTRL quirk keeps
the notification endpoint (ctrlurb / EP 0x82) polling continuously, but
that alone is insufficient: the firmware monitors bulk-IN activity, not
just notification-endpoint activity.
Add acm_submit_read_urbs() calls to the two ALWAYS_POLL_CTRL paths that
already restart the ctrlurb:
1. acm_probe(): start bulk reads at probe time alongside the ctrlurb,
so the watchdog is satisfied from first bind without requiring a
userspace process to open /dev/ttyACMn.
2. acm_port_shutdown(): restart bulk reads after port close alongside
the ctrlurb restart, so the watchdog keeps running when the last
TTY user closes the port.
acm_read_bulk_callback() already resubmits each URB unconditionally on
normal completion, so once submitted the reads remain active until an
explicit kill (disconnect, suspend). acm_submit_read_urb() is a no-op
for URBs that are already in flight (read_urbs_free bit clear), so the
existing acm_port_activate() call remains correct and races are avoided.
Tested on Lenovo Yoga Book 9 14IAH10 (83KJ): without this patch the
device resets every ~55 s when no TTY is open; with it the device
remains stable indefinitely.
Signed-off-by: Dave Carey <carvsdriver@gmail.com>
Link: https://patch.msgid.link/20260515141940.751397-1-carvsdriver@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Calling usb_role_switch_unregister if core role initialization failure.
Fixes: e4d7362dc9cd ("usb: cdns3: Add USBSSP platform driver support")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-devicetree/agKaEePSFknhDBg2@nchen-desktop/T/#m21e1d9c1574eb127ce03c0c2a1a49002ce435b52
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Link: https://patch.msgid.link/20260514010114.2436781-2-peter.chen@cixtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
goku_irq() handles a number of bus events under a single ep0 path.
It already guards the gadget driver suspend/resume callbacks against a
NULL ->driver:
if (dev->gadget.speed != USB_SPEED_UNKNOWN
&& dev->driver
&& dev->driver->resume) {
spin_unlock(&dev->lock);
dev->driver->resume(&dev->gadget);
...
}
but the very next branch unconditionally dereferences dev->driver
when an INT_USBRESET arrives:
if (stat & INT_USBRESET) {
ACK(INT_USBRESET);
INFO(dev, "USB reset done, gadget %s\n",
dev->driver->driver.name);
}
If the controller raises INT_USBRESET before any gadget driver has
been bound (or after one has been unbound), dev->driver is NULL and
the printk dereferences NULL.
smatch flags the inconsistency:
drivers/usb/gadget/udc/goku_udc.c:1618 goku_irq() error:
we previously assumed 'dev->driver' could be null (see line 1607)
Fall back to a placeholder when the gadget driver is not bound.
No functional change while a gadget driver is bound.
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Link: https://patch.msgid.link/20260509110636.19762-1-sozdayvek@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clang warns (or errors with CONFIG_WERROR=y / W=e):
drivers/usb/typec/mux/intel_pmc_mux.c:740:3: error: variable 'num_ports' is uninitialized when used here [-Werror,-Wuninitialized]
740 | num_ports++;
| ^~~~~~~~~
This should have been initialized to zero. Do so now to clean up the
warning and ensure num_ports does not use uninitialized memory.
Fixes: 8bdb0b3830ea ("usb: typec: intel_pmc_mux: combine kzalloc + kcalloc")
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://lore.kernel.org/177793914437.2560.9287713196857718000@997d03828cfd/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260506-typec-intel_pmc_mux-fix-uninit-num_ports-v1-1-929b128a32e9@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Each VHCI HC instance registers two USB buses (one HS, one SS).
USB_MAXBUS in drivers/usb/core/hcd.c is hard-coded to 64, giving an
effective maximum of 32 VHCI HC instances (32 * 2 = 64 buses).
The Kconfig range for USBIP_VHCI_NR_HCS currently allows up to 128,
which will cause probe failures for any HC instance beyond the 32nd.
These probe failures trigger the NULL pointer dereference fixed in the
previous commit.
Reduce the upper bound to 32 to reflect the real maximum imposed by
USB_MAXBUS. Note that probe failures can still occur below this limit
if real hardware has already claimed enough USB bus numbers, making
the NULL check fix necessary regardless.
Signed-off-by: Adrian Wowk <dev@adrianwowk.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20260414010050.158064-3-dev@adrianwowk.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
platform_get_drvdata() can return NULL if a VHCI host controller's
probe failed (e.g. due to USB bus number exhaustion). status_show_vhci()
checked for a NULL pdev but not for a NULL hcd returned by
platform_get_drvdata(). Passing NULL to hcd_to_vhci_hcd() does not
return NULL - it returns a pointer offset of 0x260, causing a NULL
pointer dereference when that value is subsequently dereferenced.
Add a NULL check on hcd before calling hcd_to_vhci_hcd(). Move
status_show_not_ready() above status_show_vhci() to make it callable
from the new error path without a forward declaration.
Signed-off-by: Adrian Wowk <dev@adrianwowk.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20260414010050.158064-2-dev@adrianwowk.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
>From within the SCSI error handler memory allocations must not
trigger IO. Handling errors in UAS and the storage driver may
involve resetting a device. The thread doing the reset itself
relies on VM magic. However, that is insufficient, as resetting
a device involves resuming it. Resumption as well as resetting
involves conrol transfers to the parent of the device to be reset.
That may be a root hub. Hence usbcore must heed the flags passed
to usb_submit_urb() processing control transfers to root hubs.
The problem exist since the storage driver has been merged.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260429094413.181038-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An asynchronous vbus_event_work() keep running when switch the role from
device to host. This affects EHCI host controller initialization.
USBCMD.RUNSTOP bit is set at ehci_run() and cleared by following
vbus_event_work() if bus_event_work() run after ehci_run().
The log below shows what happens:
[ 87.819925] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 87.819963] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 87.955634] ci_hdrc ci_hdrc.0: USB 2.0, controller refused to start: -110
[ 87.955658] ci_hdrc ci_hdrc.0: startup error -110
[ 87.955682] ci_hdrc ci_hdrc.0: USB bus 1 deregistered
The problem is that the chipidea UDC driver call usb_udc_vbus_handler() to
pull down data line but it don't wait for completion before host controller
starts running.
Now UDC core can properly delete usb gadget device and make sure that vbus
work is cancelled or completed after usb_del_gadget_udc() is returned. But
the udc.c only call usb_del_gadget_udc() in ci_hdrc_gadget_destroy(). To
avoid above issue, add/remove the gadget device dynamically during USB role
switching.
To support dynamic gadget add/remove, do below steps:
- clear ci->gadget and ci->ci_hw_ep at initialization.
- assign udc_[start|stop]() to rdrv->[start|stop] and properly merge the
operations in udc_id_switch_for_[device|host]() to udc_[start|stop]()
Adjust the order ci_handle_vbus_change() and ci_role_start() to avoid NULL
pointer reference since ci_hdrc_gadget_init() doesn't add gadget anymore.
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260427075653.3611180-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The VBUS interrupt is configured in multiple places, add a helper function
ci_udc_enable_vbus_irq() to simplify the code.
Acked-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260427075653.3611180-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The VENDOR_CLASS_DATA_IFACE and ALWAYS_POLL_CTRL quirk flags added in
commit f58752ebcb35 ("USB: cdc-acm: Add quirks for Yoga Book 9 14IAH10
INGENIC touchscreen") were placed inside the acm_ctrl_msg() function
rather than in the header with the other quirk flags. Then, their
values (BIT(9) and BIT(10)) collided with NO_UNION_12 which is already
BIT(9).
Move the definitions to drivers/usb/class/cdc-acm.h where they belong
and shift them to BIT(10) and BIT(11) to avoid the overlap.
Fixes: f58752ebcb35 ("USB: cdc-acm: Add quirks for Yoga Book 9 14IAH10 INGENIC touchscreen")
Cc: stable <stable@kernel.org>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Link: https://patch.msgid.link/20260522091357.1301196-1-guanwentao@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We're not allowed to dereference "urb" after calling
usb_hcd_giveback_urb() so save the urb->status ahead of time.
Fixes: 7359d482eb4d ("staging: HCD files for the DWC2 driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://patch.msgid.link/ag1NwBpqT4IEQcdJ@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a system contains multiple USB controllers, the global ci_role_switch
variable may be overwritten by subsequent driver initialization code.
This can cause issues in the following cases:
- The 2nd ci_hdrc_probe() sees ci_role_switch.fwnode as non-NULL even
though the "usb-role-switch" property is not present for the controller.
- When the ci_hdrc device is unbound and bound again, ci_role_switch
fwnode will not be reassigned, and the old value will be used instead.
Convert ci_role_switch to a local variable to fix these issues.
Fixes: 05559f10ed79 ("usb: chipidea: add role switch class support")
Cc: stable <stable@kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260427075755.3611217-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ffs_epfile_dmabuf_io_complete() calls usb_ep_free_request() on the
completed request but leaves priv->req, the back-pointer that
ffs_dmabuf_transfer() set on submission, pointing at the freed
memory. A later FUNCTIONFS_DMABUF_DETACH ioctl or
ffs_epfile_release() on the close path still sees priv->req
non-NULL under ffs->eps_lock:
if (priv->ep && priv->req)
usb_ep_dequeue(priv->ep, priv->req);
so usb_ep_dequeue() is called on a freed usb_request.
On dummy_hcd the dequeue path only walks a live queue and
pointer-compares, so the freed pointer reads without faulting and
KASAN requires an explicit check at the FunctionFS call site to
surface the use-after-free. On SG-capable in-tree UDCs the
dequeue path dereferences the supplied request immediately:
* chipidea's ep_dequeue() does
container_of(req, struct ci_hw_req, req) and reads
hwreq->req.status before acquiring its own lock.
* cdnsp's cdnsp_gadget_ep_dequeue() reads request->status first.
The narrower option of clearing priv->req via cmpxchg() in the
completion does not close the race: the completion runs without
eps_lock, so a cancel path holding eps_lock can still observe
priv->req non-NULL, race a concurrent completion that clears and
frees, and pass the freed pointer to usb_ep_dequeue(). A slightly
longer fix that moves the free into the cleanup work is needed.
Same class of lifetime race as the recent usbip-vudc timer fix [1].
Take eps_lock in the sole place that mutates priv->req from the
callback direction by moving usb_ep_free_request() out of the
completion into ffs_dmabuf_cleanup(), the existing work handler
scheduled by ffs_dmabuf_signal_done() on
ffs->io_completion_wq. Clear priv->req there under eps_lock
before freeing, and only clear if priv->req still names our
request (a subsequent ffs_dmabuf_transfer() on the same
attachment may have queued a new one).
This keeps the existing dummy_hcd sync-dequeue invariant: the
completion callback is still invoked by the UDC without
eps_lock held (dummy_hcd drops its own lock before calling the
callback), and the callback now takes no f_fs lock at all.
Serialization against the cancel path happens in cleanup, which
runs from the workqueue with no f_fs lock held on entry.
The priv ref count protects the containing ffs_dmabuf_priv:
ffs_dmabuf_transfer() takes a ref via ffs_dmabuf_get(), cleanup
drops it via ffs_dmabuf_put(), so priv stays live for the
cleanup even after the cancel path's list_del + ffs_dmabuf_put.
The ffs_dmabuf_transfer() error path no longer frees usb_req
inline: fence->req and fence->ep are set before usb_ep_queue(),
so ffs_dmabuf_cleanup() (scheduled by the error-path
ffs_dmabuf_signal_done()) owns the free regardless of whether
the queue succeeded.
Reproduced under KASAN on both detach and close paths against
dummy_hcd with an observability hook
(kasan_check_byte(priv->req) immediately before usb_ep_dequeue)
at the two FunctionFS cancel sites to surface the stale-pointer
access; the hook is not part of this patch. The KASAN
allocator / free stacks in the captured splats identify the
same request: alloc in dummy_alloc_request, free in
dummy_timer, fault reached from ffs_epfile_release (close) and
from the FUNCTIONFS_DMABUF_DETACH ioctl (detach). With the
patch applied, both paths are silent under the same hook.
The bug is reached from the FunctionFS device node, which in
real deployments is owned by the privileged gadget daemon
(adbd, UMS, composite gadget services, etc.); it is not
reachable from unprivileged userspace or from a USB host on the
cable. FunctionFS mounts default to GLOBAL_ROOT_UID, but the
filesystem supports uid=, gid=, and fmode= delegation to a
non-root gadget daemon, so on real deployments the attacker may
be a less-privileged service rather than root.
Fixes: 7b07a2a7ca02 ("usb: gadget: functionfs: Add DMABUF import interface")
Link: https://lore.kernel.org/all/20260417163552.807548-1-michael.bommarito@gmail.com/ [1]
Cc: stable <stable@kernel.org>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260419161227.1587668-1-michael.bommarito@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ffs_ep0_read() allocates its control-OUT data buffer with
kmalloc() (not kzalloc) at the Length value from the Setup
packet, then copies that full len to userspace regardless of
how many bytes were actually received:
data = kmalloc(len, GFP_KERNEL);
...
ret = __ffs_ep0_queue_wait(ffs, data, len);
if ((ret > 0) && (copy_to_user(buf, data, len)))
ret = -EFAULT;
__ffs_ep0_queue_wait() returns req->actual, which on a short
control OUT transfer is strictly less than len. The
copy_to_user() call still copies len bytes, so on a short OUT
the last (len - ret) bytes of the kmalloc() buffer --
uninitialised slab residue -- are delivered to the FunctionFS
daemon.
Short ep0 OUT completions are specified USB control-transfer
behavior and are produced by in-tree UDCs:
* dwc2 continues on req->actual < req->length for ep0 DATA OUT
(short-not-ok is the only ep0-OUT stall path).
* aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket.
* renesas_usbf logs "ep0 short packet" and completes the
request.
* dwc3 stalls on short IN but not on short OUT.
A short ep0 OUT is therefore not evidence of a broken UDC; it is
a normal condition f_fs has to cope with. The sibling gadgetfs
implementation in drivers/usb/gadget/legacy/inode.c already does
this correctly via min(len, dev->req->actual) before
copy_to_user(). This patch brings f_fs.c to the same safe
pattern rather than trimming at a defensive layer.
The bug is reached from the FunctionFS device node, which in
real deployments is owned by the privileged gadget daemon
(adbd, UMS, composite gadget services, etc.); it is not
reachable from unprivileged userspace. Linux host stacks
normally reject short-wLength control OUTs before they reach
the gadget, so reproducing this required a build that
bypasses that host-side check. With the bypass in place, a
1-byte payload on a 64-byte Setup produces 63 bytes of
non-canary slab residue in the daemon's read buffer.
Fix by copying only ret (actually received) bytes to
userspace.
Fixes: ddf8abd25994 ("USB: f_fs: the FunctionFS driver")
Cc: stable <stable@kernel.org>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260419160359.1577270-1-michael.bommarito@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The `dummy_hub_control()` function handles USB hub class requests
to the virtual root hub. The `GetPortStatus` case returns -EPIPE for
requests with `wIndex != 1`, since the virtual root hub has only a
single port. However, the `ClearPortFeature` and `SetPortFeature`
cases lack the same check.
Fix this by extending the `wIndex != 1` rejection to both cases,
matching the existing behavior of `GetPortStatus`.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@kernel.org>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260518234314.1889396-1-eeodqql09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch follows up Zheng Wang's 2023 report of a use-after-free in
vudc_remove(). The original thread stalled on Shuah Khan's request for
runtime testing of the unplug/unbind path. This patch supplies that
testing and keeps Zheng's original fix shape.
In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer().
usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer().
vudc_remove() can then free the containing struct vudc while the timer is
still pending or executing.
KASAN confirms the race on an unpatched x86_64 QEMU guest with
CONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loop
that repeatedly writes a socket fd to usbip_sockfd, closes the socket
pair, and unbinds/rebinds usbip-vudc.0:
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0
Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239
Allocated by task 239:
vudc_probe+0x4d/0xaa0
Freed by task 239:
kfree+0x18f/0x520
device_release_driver_internal+0x388/0x540
unbind_store+0xd9/0x100
This lands in the timer core rather than v_timer() itself because the
embedded timer_list is being walked after its containing struct vudc has
already been freed. The underlying lifetime bug is the same one Zheng
reported.
With v_stop_timer() called from vudc_remove() and the timer deleted
synchronously, the same harness completed 5000 bind/unbind iterations
with no KASAN report.
Fixes: b6a0ca111867 ("usbip: vudc: Add UDC specific ops")
Cc: stable <stable@kernel.org>
Reported-by: Zheng Wang <zyytlz.wz@163.com>
Closes: https://lore.kernel.org/linux-usb/20230317100954.2626573-1-zyytlz.wz@163.com/
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20260417163552.807548-1-michael.bommarito@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The PNY Elite Portable SSD (USB ID 154b:f009) is a sibling of the
already-quirked PNY Pro Elite SSDs (154b:f00b and 154b:f00d). Like its
siblings, it uses a Phison-based USB-SATA bridge that exhibits
firmware bugs when bound to the uas driver.
Without quirks, the device fails to complete READ CAPACITY commands
when accessed over UAS on a SuperSpeed (USB 3) port. The device
enumerates and reports as a SCSI direct-access device, but reports
zero logical blocks and never finishes spin-up:
usb 2-3: new SuperSpeed USB device number 8 using xhci_hcd
usb 2-3: New USB device found, idVendor=154b, idProduct=f009
usb 2-3: Product: PNY ELITE PSSD
usb 2-3: Manufacturer: PNY
scsi host0: uas
scsi 0:0:0:0: Direct-Access PNY PNY ELITE PSSD 0
sd 0:0:0:0: [sda] Spinning up disk...
[...10+ seconds of polling, no progress...]
sd 0:0:0:0: [sda] Read Capacity(16) failed: hostbyte=DID_ERROR
sd 0:0:0:0: [sda] Read Capacity(10) failed: hostbyte=DID_ERROR
sd 0:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
Tested each individual quirk to find the minimum that fixes this:
- US_FL_NO_ATA_1X alone: device hangs on spin-up
- US_FL_NO_REPORT_OPCODES alone: works on USB 2.0, hangs on USB 3.0
- US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES: works on both
With both quirks the device enumerates correctly while still using
the uas driver, and delivers full UAS throughput (~281 MB/s
sequential read on a USB 3.0 Gen 1 port).
The existing PNY Pro Elite entries (f00b, f00d) only set NO_ATA_1X,
but this device additionally chokes on REPORT OPCODES under
SuperSpeed.
Signed-off-by: Sam Burkels <sam@1a38.nl>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260501132346.86572-1-sam@1a38.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Lenovo ThinkPad USB-C Dock Gen2 (17ef:a391, 17ef:a392) hub
controllers exhibit link instability when USB Link Power Management
is enabled, similar to the dock's Ethernet adapter (17ef:a387) which
already carries USB_QUIRK_NO_LPM.
When the dock reconnects after a transient disconnect, the hub
controllers enter LPM states between re-enumeration retries, causing
repeated disconnect/reconnect cycles lasting up to two minutes.
Disabling LPM for these devices restores stable enumeration.
Signed-off-by: Stephen J. Fuhry <fuhrysteve@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260513171419.44849-1-fuhrysteve@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The USB488 subclass specification requires interrupt wMaxPacketSize to
be 0x02, unless the device sends vendor-specific notifications.
Endpoints that advertise less than 2 bytes for wMaxPacketSize are
unlikely to work with the current driver, as URBs will not have enough
space for interrupt headers. Considering that any notification URBs will
be ignored by the driver, reject these endpoints early during probe.
Fixes: 041370cce889 ("USB: usbtmc: refactor endpoint retrieval")
Cc: stable <stable@kernel.org>
Suggested-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Link: https://patch.msgid.link/20260505-usbtmc-iin-size-v3-2-a36113f62db7@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
USBTMC devices can use an optional interrupt endpoint for notification
messages. These typically contain two-byte headers indicating the
payload format, but the driver does not check if these headers are
present before accessing the data buffers. In cases where the URB
actual_length is not enough to fit these headers, the driver will either
cause an out-of-bounds read, or consume stale leftover data from a
previous notification.
Fix by checking if actual_data contains enough bytes for the headers,
otherwise resubmit URB to the interrupt endpoint.
Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.")
Reported-by: syzbot+abbfd103085885cf16a2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=abbfd103085885cf16a2
Cc: stable <stable@kernel.org>
Suggested-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Link: https://patch.msgid.link/20260505-usbtmc-iin-size-v3-1-a36113f62db7@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a USB device is unplugged from the dual-role port, the device-mode
path in tegra_xhci_id_work() explicitly clears both SS and HS port power
via direct hub_control ClearPortFeature(POWER) calls. This preempts the
xHCI controller's normal disconnect processing -- PORT_CSC is never
generated, the USB core never sees the disconnect, and the device remains
in its internal tree as a ghost visible in lsusb.
Add an otg_set_port_power flag to control whether the dual-role switch
path performs explicit port power management. SoCs that need it
(Tegra124 / Tegra210 / Tegra186) set the flag; later SoCs (Tegra194 and
beyond) rely on the PHY mode change to handle disconnect naturally and
skip all port power calls.
Within the port power path, otg_reset_sspi additionally gates the SSPI
reset sequence on host-mode entry for SoCs that require it.
Flags set per SoC:
Tegra124, Tegra186 -> otg_set_port_power
Tegra210 -> otg_set_port_power, otg_reset_sspi
Tegra194 and later -> (none)
Fixes: f836e7843036 ("usb: xhci-tegra: Add OTG support")
Cc: stable <stable@kernel.org>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Link: https://patch.msgid.link/20260505112630.217704-1-weichengc@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
uvc_function_bind() walks &opts->extension_units twice without holding
opts->lock:
- directly, for the iExtension string-descriptor fixup loop;
- indirectly, four times via uvc_copy_descriptors() (once per speed),
where the helper iterates uvc->desc.extension_units (which aliases
&opts->extension_units) to size and emit XU descriptors.
The configfs side (uvcg_extension_make / uvcg_extension_drop, in
drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its
list_add_tail / list_del operations. A privileged userspace process
that holds the configfs subtree open and writes the gadget UDC name
to bind the function while concurrently rmdir()'ing an extensions
subdir can race uvcg_extension_drop() against the bind-time list walks
and dereference a freed struct uvcg_extension.
Hold opts->lock from the start of the XU string-descriptor fixup
through the last uvc_copy_descriptors() call, releasing on the
descriptor-error path via a new error_unlock label that drops the
lock before falling through to the existing error label. This
matches the locking discipline of the configfs callbacks and removes
the only remaining unsynchronised reader of the XU list during bind.
Reachability: only privileged processes that can mount configfs and
write to gadget UDC files can trigger the race, so this is a
correctness fix rather than a security boundary.
Fixes: 0525210c9840 ("usb: gadget: uvc: Allow definition of XUs in configfs")
Cc: stable <stable@kernel.org>
Signed-off-by: Kai Aizen <kai.aizen.dev@gmail.com>
Link: https://patch.msgid.link/20260430175643.67120-1-kai.aizen.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb_initialize_gadget() installs gadget_release() as the release
callback for the embedded gadget device. The struct net2280 instance is
therefore released through gadget_release() when the gadget device's last
reference is dropped.
The probe error path calls net2280_remove(), which tears down the
partially initialized device and drops the gadget reference with
usb_put_gadget(). Calling kfree(dev) afterwards can free the same object
again.
Drop the explicit kfree() and let the gadget device release callback
handle the final free. This issue was found by a static analysis tool
I am developing.
Fixes: f770fbec4165 ("USB: UDC: net2280: Fix memory leaks")
Cc: stable <stable@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260427153651.337846-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
hidg_alloc() initializes hidg->dev with device_initialize() before
calling dev_set_name(). If dev_set_name() fails, the function currently
jumps to err_unlock and returns without calling put_device().
This leaves the device reference unbalanced and prevents hidg_release()
from being called. Calling put_device() here is also safe, since
hidg_release() only frees resources owned by hidg.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Route the dev_set_name() failure path through err_put_device so the
device reference is dropped properly.
Fixes: 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev")
Cc: stable <stable@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Johan Hovold johan@kernel.org
Link: https://patch.msgid.link/20260413142119.2977716-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In omap2430_probe(), of_node_put(np) is called prematurely before the
last access to np, leading to a use-after-free if the node's reference
count drops to zero. Move the of_node_put() calls after the last use of
np in both the success and error paths.
Fixes: ffbe2feac59b ("usb: musb: omap2430: Fix probe regression for missing resources")
Cc: stable <stable@kernel.org>
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260409101104.480623-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
connected
We only need to update the power_supply on power role change if the port
is connected, because otherwise the online status should be the same for
both cases.
Cc: stable <stable@kernel.org>
Fixes: 7616f006db07 ("usb: typec: ucsi: Update power_supply on power role change")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://patch.msgid.link/20260519-ucsi-fix-2-v1-2-6f1239535187@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The CrOS EC may send a connector status change event with the power
direction changed flag set even if the power direction hasn't actually
changed after initiating a SET_PDR command internally [1]. In practice
this happens on every system suspend due to other changes performed by
the EC [2][3][4], causing suspend to fail.
Fix this by checking if the power role change actually happened before
handling it.
[1]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=1689;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794
[2]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=3923;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794
[3]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=5094;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794
[4]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=2229;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794
Cc: stable <stable@kernel.org>
Fixes: 7616f006db07 ("usb: typec: ucsi: Update power_supply on power role change")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260519-ucsi-fix-2-v1-1-6f1239535187@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
UGREEN USB-C Multifunction Adapter Model CM512 (AKA "Revodok 107")
exposes two SVIDs: 0xff01 (DP Alt Mode) and 0x1d5c. The DISCOVER_MODES
step succeeds for 0xff01 and gets a NAK for 0x1d5c. Currently this
results in DP Alt Mode not being registered either, since the modes
are only registered once all of them have been discovered. The NAK
results in the processing being stopped and thus no Alt modes being
registered.
Improve the situation by handling the NAK gracefully and continue
processing the other modes.
Before this change, the TCPM log ends like this:
(more log entries before this)
[ 5.028287] AMS DISCOVER_SVIDS finished
[ 5.028291] cc:=4
[ 5.040040] SVID 1: 0xff01
[ 5.040054] SVID 2: 0x1d5c
[ 5.040082] AMS DISCOVER_MODES start
[ 5.040096] PD TX, header: 0x1b6f
[ 5.050946] PD TX complete, status: 0
[ 5.059609] PD RX, header: 0x264f [1]
[ 5.059626] Rx VDM cmd 0xff018043 type 1 cmd 3 len 2
[ 5.059640] AMS DISCOVER_MODES finished
[ 5.059644] cc:=4
[ 5.069994] Alternate mode 0: SVID 0xff01, VDO 1: 0x000c0045
[ 5.070029] AMS DISCOVER_MODES start
[ 5.070043] PD TX, header: 0x1d6f
[ 5.081139] PD TX complete, status: 0
[ 5.087498] PD RX, header: 0x184f [1]
[ 5.087515] Rx VDM cmd 0x1d5c8083 type 2 cmd 3 len 1
[ 5.087529] AMS DISCOVER_MODES finished
[ 5.087534] cc:=4
(no further log entries after this point)
After this patch the TCPM log looks exactly the same, but then
continues like this:
[ 5.100222] Skip SVID 0x1d5c (failed to discover mode)
[ 5.101699] AMS DFP_TO_UFP_ENTER_MODE start
(log goes on as the system initializes DP AltMode)
Cc: stable <stable@kernel.org>
Fixes: 41d9d75344d9 ("usb: typec: tcpm: add discover svids and discover modes support for sop'")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20260429-tcpm-discover-modes-nak-fix-v4-1-75945d0ed30f@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
According to the cdns3 datasheet, the EPRST (Endpoint Reset) command
causes the DMA engine to reposition its internal pointer to the next
Transfer Descriptor (TD) if it was already processing one.
This issue is consistently observed during the ADB identification
process on macOS hosts, where the host issues a Clear_Halt. Although
commit 4bf2dd65135a ("usb: cdns3: gadget: toggle cycle bit before reset
endpoint") attempted to avoid DMA advance by toggling the cycle bit,
trace logs show that on certain hosts like macOS, the DMA pointer
(EP_TRADDR) still shifts after EPRST:
cdns3_ctrl_req: Clear Endpoint Feature(Halt ep1out)
cdns3_doorbell_epx: ep1out, ep_trbaddr f9c04030 <-- Should be f9c04000
cdns3_gadget_giveback: ep1out: req: ... length: 16384/16384
As shown above, the DMA pointer jumped to the next TD, causing
the controller to skip the initial TRBs of the request. This leads to
data misalignment and ADB protocol hangs on macOS.
Fix this by manually restoring the EP_TRADDR register to the starting
physical address of the current request after the EPRST operation is
complete.
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Cc: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Yongchao Wu <yongchao.wu@autochips.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260513160012.2547894-1-yongchao.wu@autochips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
the runtime PM usage counter across bind/unbind cycles
Call pm_runtime_allow(dev) conditionally at cdns3_plat_remove.
Fixes: f738957277ba ("usb: cdns3: Split core.c into cdns3-plat and core.c file")
Cc: stable <stable@kernel.org>
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-devicetree/agKaEePSFknhDBg2@nchen-desktop/T/#m21e1d9c1574eb127ce03c0c2a1a49002ce435b52
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Link: https://patch.msgid.link/20260513085310.2217547-3-peter.chen@cixtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
failure
Move usb2_phy initialization after usb3_phy acquisition.
Fixes: f738957277ba ("usb: cdns3: Split core.c into cdns3-plat and core.c file")
Cc: stable <stable@kernel.org>
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-devicetree/agKaEePSFknhDBg2@nchen-desktop/T/#m21e1d9c1574eb127ce03c0c2a1a49002ce435b52
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Link: https://patch.msgid.link/20260513085310.2217547-2-peter.chen@cixtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled array, only its representation in
source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Vladimir Zapolskiy <vz@kernel.org>
Link: https://patch.msgid.link/20260519161300.1598095-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Richard Leitner <richard.leitner@linux.dev>
Link: https://patch.msgid.link/20260518135536.781168-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260518110142.637215-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
AMD Promontory 21 (PROM21) xHCI PCI functions use the common xhci-pci
core for USB operation, but also expose controller-specific sensor data.
Add a small PROM21 PCI glue driver for AMD 1022:43fc and 1022:43fd
controllers.
The glue delegates USB host operation to the common xhci-pci core and
publishes a "hwmon" auxiliary device with parent-provided MMIO data.
Auxiliary device creation failure is logged but does not fail the xHCI
probe.
Make the PROM21 glue a hidden Kconfig tristate driven by the user-visible
SENSORS_PROM21_XHCI option. If sensor support is disabled, generic
xhci-pci binds PROM21 controllers normally. If sensor support is enabled,
the glue follows USB_XHCI_PCI.
This keeps the auxiliary device available for a modular sensor driver while
avoiding a built-in xhci-pci core handing PROM21 controllers to a glue
driver that is only available as a module during initramfs.
Assisted-by: Codex:gpt-5.5
Signed-off-by: Jihong Min <hurryman2212@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260519000732.2334711-2-hurryman2212@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the driver-internal function entry/exit debug messages
in favor of existing kernel-level function tracing mechanisms.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/all/2026051657-scruffy-embark-45ea@gregkh/
Signed-off-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260520-ueagle-atm-cleanup-v1-2-010c8bc7b214@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert dev_info() to dev_dbg().
Per 'Documentation/process/coding-style.rst':
13) Printing kernel messages
... When drivers are working properly they are quiet,
so prefer to use dev_dbg/pr_debug unless something is wrong.
While in there, correct the verb form and add 'with' for clarity.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/all/2026051628-squatter-stature-c0e0@gregkh/
Signed-off-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260520-ueagle-atm-cleanup-v1-1-010c8bc7b214@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260430163919.47372-7-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260430163919.47372-6-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260430163919.47372-5-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260430163919.47372-4-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260430163919.47372-3-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260430163919.47372-2-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The kernel-doc comment for dwc3_alloc_event_buffers states that the
function "Allocates @num event buffers", but the function does not have
a @num parameter and only allocates a single event buffer.
Remove the misleading "@num" reference from the brief description to
accurately reflect the function's behavior.
Signed-off-by: Shuping Bu <bushuping007@163.com>
Link: https://patch.msgid.link/20260520055023.2415635-1-bushuping007@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If devm_drm_dp_hpd_bridge_add() fails during fusb302_probe(), the original
code returned directly without cleaning up the resources.
Move bridge registration before the IRQ is requested and route bridge
registration failures through the existing TCPM unregister and fwnode
cleanup path.
Fixes: 5d79c525405d ("usb: typec: fusb302: add DRM DP HPD bridge support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260428-fusb-v2-1-aa3b5942cabb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix error handling and resource cleanup i.e remove invalid
phy_exit() after failed phy_init(), route failures through
proper cleanup paths and return 0 explicitly on success.
Fixes: 84770f028fab ("usb: dwc3: Add driver for Xilinx platforms")
Cc: stable@vger.kernel.org
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20260519115529.2980421-1-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The RW135R-GL entry added in commit 01e8d0f74222 ("USB: serial: option:
add support for Rolling Wireless RW135R-GL") was missing the
.driver_info = RSVD(5) flag used by other Rolling Wireless MBIM laptop
modules (e.g. RW135-GL and RW350-GL).
Without this flag, the option driver incorrectly binds to the reserved
ADB interface (If#5) in multi-interface USB modes, causing AT/MBIM
communication failures after mode switching. This matches the handling
of other Rolling Wireless MBIM devices.
- VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM
interface for Linux/Chrome OS)
0x1003: mbim, diag, AT, pipe
Here are the outputs of usb-devices:
T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=33f8 ProdID=1003 Rev= 5.15
S: Manufacturer=Rolling Wireless S.a.r.l.
S: Product=Rolling RW135R-GL Module
S: SerialNumber=12345678
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM
interface for Linux/Chrome OS)
0x1003: mbim, diag, AT, ADB, pipe
Here are the outputs of usb-devices:
T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=33f8 ProdID=1003 Rev= 5.15
S: Manufacturer=Rolling Wireless S.a.r.l.
S: Product=Rolling RW135R-GL Module
S: SerialNumber=12345678
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM
interface for Linux/Chrome OS)
0x1003: mbim, pipe
Here are the outputs of usb-devices:
T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=33f8 ProdID=1003 Rev= 5.15
S: Manufacturer=Rolling Wireless S.a.r.l.
S: Product=Rolling RW135R-GL Module
S: SerialNumber=12345678
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Fixes: 01e8d0f74222 ("USB: serial: option: add support for Rolling Wireless RW135R-GL")
Signed-off-by: Wanquan Zhong <wanquan.zhong@fibocom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add support for the Qualcomm Technology Snapdragon X35-based MeiG
SRM813Q module.
The module can be put in different modes via AT commands to
enable/disable GPS functionality:
MODEM - PPP mode(2dee:4d63): AT+SER=1,1
If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: MODEM
If#= 3: AT
P: Vendor=2dee ProdID=4d63 Rev=05.15
S: Manufacturer=MEIG
S: Product=LTE-A Module
S: SerialNumber=1bd51f0e
C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
NMEA mode(2dee:4d64): AT+SER=51,1
If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: NMEA
If#= 3: AT
P: Vendor=2dee ProdID=4d64 Rev=05.15
S: Manufacturer=MEIG
S: Product=LTE-A Module
S: SerialNumber=1bd51f0e
C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
Signed-off-by: Jan Volckaert <janvolck@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add the missing sanity check on the size of interrupt-in transfers to
avoid parsing stale or uninitialised slab data (and leaking it to user
space).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The driver overrides the maximum transfer size for a specific device
which only accepts 16 byte packets for its 32 byte bulk-out endpoint.
Make sure to never increase the maximum transfer size to prevent slab
corruption should a malicious device report a smaller endpoint max
packet size than expected.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add the missing sanity check on the size of usa49wg indat transfers to
avoid parsing stale or uninitialised slab data.
Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG")
Cc: stable@vger.kernel.org # 2.6.23
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add the missing bulk-out buffer size sanity checks to avoid
out-of-bounds memory accesses or slab corruption should a malicious
device report smaller buffers than expected.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The Belkin interrupt callback treats interrupt data as a four-byte
status report and reads LSR/MSR fields at offsets 2 and 3. The
interrupt-in buffer length is derived from endpoint wMaxPacketSize, and
short interrupt transfers may complete successfully with a smaller
actual_length.
Check the completed interrupt packet length before parsing status
fields so short interrupt endpoints and short successful packets are
ignored instead of causing out-of-bounds or stale status-byte reads.
KASAN report as below:
BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback()
Read of size 1
Call trace:
belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202)
__usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630)
dummy_timer() (?:?)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The connector number in a UCSI CCI notification is a 7-bit field
supplied by the PPM. ucsi_connector_change() uses it to index the
ucsi->connector[] array without checking it against the number of
connectors the PPM reported at init time, so a buggy or malicious PPM
(EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 /
glink transports) can drive schedule_work() on memory past the end of
the array.
Reject connector numbers that are zero or exceed cap.num_connectors
before dereferencing the array.
Assisted-by: gkh_clanker_t1000
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Jameson Thies <jthies@google.com>
Cc: Nathan Rebello <nathan.c.rebello@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Pooja Katiyar <pooja.katiyar@intel.com>
Cc: Hsin-Te Yuan <yuanhsinte@chromium.org>
Cc: Abel Vesa <abelvesa@kernel.org>
Cc: stable <stable@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/2026051351-truck-steadfast-df48@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ucsi_displayport_vdm() handles a DP_CMD_CONFIGURE by copying the first
payload VDO from data[], but unlike the equivalent handler in
altmodes/displayport.c it does not check that count covers a VDO beyond
the header. A header-only Configure VDM (count == 1) would read one u32
past the caller's array.
In the normal UCSI path the caller controls count, so this is hardening
for non-standard delivery paths. NAK and bail when no configuration VDO
is present, matching the generic DP altmode driver's existing guard.
Assisted-by: gkh_clanker_t1000
Cc: Pooja Katiyar <pooja.katiyar@intel.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/2026051351-vividly-flattered-eb3d@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
svdm_consume_modes() checks pmdata->altmodes against the array size once
before the loop over the count, but forgot to check the bound at every
point in the loop.
In the well-behaved SVDM discovery flow this is harmless because each of
at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX
modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the
CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming
ACK with any request the port actually sent. Once port->partner is set,
an unsolicited Discover Modes ACK is consumed unconditionally. A broken
or malicious port partner can therefore drive altmodes to
ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra
Discover Modes ACK with seven VDOs. Because the pre-loop check passes,
the loop could then writes up to five entries past altmode_desc[]. For
mode_data_prime the next field in struct tcpm_port is the
partner_altmode[] pointer array, which then receives partner-chosen
SVID/VDO bytes.
Move the bound check inside the loop so the array can never be indexed
past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner
supplies or how the function was reached.
Assisted-by: gkh_clanker_t1000
Cc: Badhri Jagan Sridharan <badhri@google.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026051351-reshuffle-skillful-90af@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Properly validate the count passed from a device when calling
svdm_consume_identity() or svdm_consume_identity_sop_prime() as the
device-controlled value could index off of the static arrays, which
could leak data.
Assisted-by: gkh_clanker_t1000
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/2026051350-plated-salute-0efe@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A broken/malicious port can transmit a CRC-valid frame whose header
advertises up to seven data objects but whose body carries fewer than
that. Check for this, and rightfully reject the message, instead of
reading from uninitialized stack memory.
Assisted-by: gkh_clanker_t1000
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: "André Draszik" <andre.draszik@linaro.org>
Cc: Badhri Jagan Sridharan <badhri@google.com>
Cc: Amit Sunil Dhamne <amitsd@google.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026051350-sitter-canopener-9045@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update VDO
A broken/malicious device can send the incorrect count for a status
update VDO, which will cause the kernel to read uninitialized stack data
and send it off elsewhere.
Fix this up by correctly verifying the count for the update object.
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/2026051350-reacquire-sculpture-4244@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wcove_read_rx_buffer() copies the PD RX FIFO into the caller's
struct pd_message with
for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++)
regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i);
which has two problems:
USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message
is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed).
The byte count latched in RXINFO is the number of bytes the port partner
put on the wire, so a malicious partner that transmits a 31-byte frame
can drive the loop one byte past the destination if the WCOVE BMC
receiver does not enforce the PD object-count limit in hardware. The
existing FIXME flagged this as unverified.
Independently, regmap_read() takes an unsigned int * and stores a full
unsigned int at the destination. Passing the byte pointer msg + i means
each iteration writes four bytes; the high three are zero (val_bits is
8) and are normally overwritten by the next iteration, but the final
iteration's high bytes are not. With RXBYTES == 30 the i == 29 iteration
already writes three zero bytes past msg, which sits on the IRQ thread's
stack in wcove_typec_irq().
Clamp the loop to sizeof(struct pd_message) and read each register into
a local before storing only its low byte, so the copy can never exceed
the destination regardless of what RXINFO reports.
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/2026051347-clustered-deflected-9543@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Core usually prints endpoint addresses with 0x%X format.
Change this code to use it too, instead of just %d.
Particularly for IN, 0x83 seems more readable than 131.
While at that, fix checkpatch warnings about multi-line
quoted strings, as well as missing or doubled whitespace
in those strings.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://patch.msgid.link/20260518073258.6532bdd5.michal.pecio@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Tao Xue found that some common devices violate USB 3.x section 9.6.7
by reporting wBytesPerInterval lower than the size of packets they
actually send. I confirmed that AX88179 may set it to 0 and RTL8153
CDC configuration sets it to 8 but sends both 8 and 16 byte packets:
S Ii:11:007:3 -115:128 16 <
C Ii:11:007:3 0:128 8 = a1000000 01000000
S Ii:11:007:3 -115:128 16 <
C Ii:11:007:3 0:128 16 = a12a0000 01000800 00000000 00000000
Most xHCI host controllers neglect interrupt bandwidth reservations
and let such devices exceed theirs, some fail the URB with EOVERFLOW.
Assume that wBytesPerInterval lower than wMaxPacketSize is bogus and
increase it to the worst case maximum on interrupt IN endpoints. This
solves xHCI problems and appears to have no other effect. Interrupt
transfers are not limited to one interval and drivers submit URBs of
class defined size without looking at wBytesPerInterval. Any multi-
interval transfer is considered terminated by a packet shorter than
wMaxPacketSize regardless of wBytesPerInterval - see USB3 8.10.3.
Stay in spec on OUT endpoints and isochronous. No buggy devices are
known and we don't want to risk sending more data than the device
is prepared to handle or confusing isoc drivers regarding altsetting
capacities guaranteed by the device itself. And don't complain when
wMaxPacketSize <= wBytesPerInterval < wMaxPacketSize * (bMaxBurst+1)
because enabling this seems to be the exact goal of the spec.
Reported-and-tested-by: Tao Xue <xuetao09@huawei.com>
Closes: https://lore.kernel.org/linux-usb/20260402021400.28853-1-xuetao09@huawei.com/
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://patch.msgid.link/20260518073207.5b7d26e7.michal.pecio@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no good reason to have wBytesPerInterval < wMaxPacketSize -
either one is too low or the other too high, and we may want to warn
about such descriptors. Start with cleaning up our own root hubs.
USB 3.2 section 10.15.1 sets wMaxPacketSize and wBytesPerInterval of
SuperSpeed hub status endpoints at 2 bytes, so reduce wMaxPacketSize
from its former value of 4, which was derived from USB 2.0 spec and
the kernel's USB_MAXCHILDREN limit. They don't apply because USB 3.2
10.15.2.1 specifies SuperSpeed hubs to have up to 15 ports.
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://patch.msgid.link/20260518073121.7bc1da0f.michal.pecio@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
do_flash() locates the first .cyacd record with
p = strnchr(fw->data, fw->size, ':');
while (p < eof) {
s = strnchr(p + 1, eof - p - 1, ':');
...
}
If the firmware image contains no ':' byte, strnchr() returns NULL.
NULL compares less than the valid kernel pointer eof, so the loop body
runs and strnchr() is called with p + 1 == (void *)1 and a length of
roughly (unsigned long)eof, causing a wonderful crash.
The not_signed_fw fallthrough earlier in do_flash() and the chip-state
branches in ccg_fw_update_needed() allow an unsigned blob to reach this
loop, so a root user who can place a crafted file under /lib/firmware
and write the do_flash sysfs attribute can trigger the oops.
Bail out with -EINVAL when the initial strnchr() returns NULL.
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026051405-posture-shrill-7884@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The WebUSB GET_URL handler in composite_setup() narrows
landing_page_length to fit the host-supplied wLength using
landing_page_length = w_length
- WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;
If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the
unsigned subtraction wraps, and the subsequent
memcpy(url_descriptor->URL,
cdev->landing_page + landing_page_offset,
landing_page_length - landing_page_offset);
ends up copying close to UINT_MAX bytes from cdev->landing_page into
cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup
on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the
memcpy as a 4294967293-byte field-spanning write into
url_descriptor->URL (size 252).
A USB host can reach this from a single SETUP packet against any
gadget that has webusb/use=1 and a landingPage configured.
Handle the small-wLength case before the math: when the host requested
fewer bytes than the URL descriptor header, only the header is
meaningful and no URL bytes need to be copied. Setting
landing_page_length to landing_page_offset makes the existing memcpy a
no-op and leaves the descriptor returned to the host unchanged for all
larger wLength values.
Fixes: 93c473948c58 ("usb: gadget: add WebUSB landing page support")
Cc: stable <stable@kernel.org>
Signed-off-by: Jeremy Erazo <mendozayt13@gmail.com>
Link: https://patch.msgid.link/20260512160530.352318-1-mendozayt13@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Set the error code on these two error paths. The existing code returns
success.
Fixes: 77ed2f4538da ("usb: typec: tipd: Use read_power_status function in probe")
Fixes: 04041fd7d6ec ("usb: typec: tipd: Read data status in probe and cache its value")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/agL9o7wUK1dOVBTy@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The termios definitions are provided by the termios.h header file which
is included by tty.h so drop the redundant asm/termbits.h include
directive.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add the missing atomic.h include to the two driver that use it but did
not include it directly.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
This driver no longer uses anything from atomic.h so drop the unused
include directive.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
These drivers (and usb-serial.c) no longer use anything from
moduleparam.h so drop the unnecessary include directives.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
These drivers (and usb-serial.c) no longer use anything from uaccess.h
directly so drop the unnecessary include directives.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add the missing uaccess.h include, which is needed since TIOCSRS485
support was added, instead of relying on the header being included
indirectly.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
These drivers (and usb-serial.c) no longer use anything from tty_flip.h
directly so drop the unnecessary include directives.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
USB serial drivers do not use anything from tty_driver.h directly (only
core does) so drop the unnecessary include directives.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
In preparation for adding support for 3, 5, 6 and 7 port devices, replace
the current one-bit-per-type encoding of the number of ports with a more
compact four bit encoding (2..16 ports or undefined).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
We need the USB fixes in here as well to test and work off of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial device ids for 7.1-rc3
Here are some new modem device ids.
This one has been in linux-next with no reported issues.
* tag 'usb-serial-7.1-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit Cinterion LE910Cx compositions
|
|
Add the following Telit Cinterion LE910Cx compositions:
0x1251: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (SAP)
T: Bus=01 Lev=01 Prnt=21 Port=06 Cnt=01 Dev#=108 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1251 Rev=03.18
S: Manufacturer=Android
S: Product=LE910C1-EU
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
0x1253: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (SAP)
T: Bus=01 Lev=01 Prnt=21 Port=06 Cnt=01 Dev#=121 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1253 Rev=03.18
S: Manufacturer=Android
S: Product=LE910C1-EU
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
0x1254: tty (AT) + tty (AT)
T: Bus=01 Lev=01 Prnt=21 Port=06 Cnt=01 Dev#=122 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1254 Rev=03.18
S: Manufacturer=Android
S: Product=LE910C1-EU
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
0x1255: tty (AT/NMEA) + tty (AT) + tty (AT) + tty (SAP)
T: Bus=01 Lev=01 Prnt=21 Port=06 Cnt=01 Dev#=123 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1255 Rev=03.18
S: Manufacturer=Android
S: Product=LE910C1-EU
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
None of the remaining boards put useful data into the platform_data
structures, so effectively this only works with DT based probing.
Remove all code that references this data, to stop using the legacy
gpiolib interfaces. The pxa27x version already supports gpio
descriptors, while the pxa25x version now does it the same way.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260427143300.2887692-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427070044.17974-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A flexible array member can be used to combine allocations and simplify
handling slightly.
Add __counted_by for extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260425014201.439251-1-rosenp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When there's nothing going through the retimer, there's no reason to
keep it online. Put it in reset when possible to save power.
Also, remove the register cache-compare optimization as it makes little
sense now that the chip resets during almost all transitions and
tracking the validity of that cache becomes a headache.
Suggested-by: Jack Pham <jack.pham@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Link: https://patch.msgid.link/20260420-topic-ps883x_unused_reset-v1-1-7aabf7004d2a@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Just like in a previous problem in this driver, usblp_ctrl_msg() will
collapse the usb_control_msg() return value to 0/-errno, discarding the
actual number of bytes transferred.
Ideally that short command should be detected and error out, but many
printers are known to send "incorrect" responses back so we can't just
do that.
statusbuf is kmalloc(8) at probe time and never filled before the first
LPGETSTATUS ioctl.
usblp_read_status() requests 1 byte. If a malicious printer responds
with zero bytes, *statusbuf is one byte of stale kmalloc heap,
sign-extended into the local int status, which the LPGETSTATUS path then
copy_to_user()s directly to the ioctl caller.
Fix this all by just zapping out the memory buffer when allocated at
probe time. If a later call does a short read, the data will be
identical to what the device sent it the last time, so there is no
"leak" of information happening.
Cc: Pete Zaitcev <zaitcev@redhat.com>
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026042011-shredder-savage-48c6@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usblp_ctrl_msg() collapses the usb_control_msg() return value to
0/-errno, discarding the actual number of bytes transferred. A broken
printer can complete the GET_DEVICE_ID control transfer short and the
driver has no way to know.
usblp_cache_device_id_string() reads the 2-byte big-endian length prefix
from the response and trusts it (clamped only to the buffer bounds).
The buffer is kmalloc(1024) at probe time. A device that sends exactly
two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves
device_id_string[2..1022] holding stale kmalloc heap.
That stale data is then exposed:
- via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated
at the first NUL in the stale heap), and
- via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full
claimed length regardless of NULs, up to 1021 bytes of uninitialized
heap, with the leak size chosen by the device.
Fix this up by just zapping the buffer with zeros before each request
sent to the device.
Cc: Pete Zaitcev <zaitcev@redhat.com>
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026042002-unicorn-greedily-3c63@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Linux Version Code is currently written to the GUID register before
PHY initialization. Certain PHY implementations (such as Synopsys eUSB
PHY performing link_sw_reset) clear the GUID register to its default
value during initialization, causing the kernel version information to
be lost.
Move the GUID register programming to occur after PHY initialization
completes to ensure the Linux version information persists.
Fixes: fa0ea13e9f1c ("usb: dwc3: core: write LINUX_VERSION_CODE to our GUID register")
Cc: stable <stable@kernel.org>
Reported-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260417063314.2359-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The port in debug accessory mode can be either a source or sink. The
previous tcpm_port_is_debug() function only checked for source port.
Commit 8db73e6a42b6 ("usb: typec: tcpm: allow sink (ufp) to toggle into
accessory mode debug") changed the detection logic to support both roles,
but left some logic in _tcpm_cc_change() unchanged, This causes the state
machine to transition to an incorrect state when operating as a sink in
debug accessory mode. Log as below:
[ 978.637541] CC1: 0 -> 5, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 978.637567] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
[ 978.637596] pending state change SRC_ATTACH_WAIT -> DEBUG_ACC_ATTACHED @ 180 ms [rev1 NONE_AMS]
[ 978.647098] CC1: 5 -> 0, CC2: 5 -> 5 [state SRC_ATTACH_WAIT, polarity 0, connected]
[ 978.647115] state change SRC_ATTACH_WAIT -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
It should go to SNK_ATTACH_WAIT instead of SRC_ATTACH_WAIT state.
To fix this, add tcpm_port_is_debug_source() and tcpm_port_is_debug_sink()
helper to explicitly identify the power mode in debug accessory mode.
Update the state transition logic in _tcpm_cc_change() to ensure the state
machine transitions comply with Type-C specification. Also update the logic
in run_state_machine() to keep consistency.
Fixes: 8db73e6a42b6 ("usb: typec: tcpm: allow sink (ufp) to toggle into accessory mode debug")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Amit Sunil Dhamne <amitsd@google.com>
Link: https://patch.msgid.link/20260424074009.2979266-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reset internal port states (such as vdm_sm_running and
explicit_contract) on soft reset AMS as the port needs to negotiate a
new contract. The consequence of leaving the states in as-is cond are as
follows:
* port is in SRC power role and an explicit contract is negotiated
with the port partner (in sink role)
* port partner sends a Soft Reset AMS while VDM State Machine is
running
* port accepts the Soft Reset request and the port advertises src caps
* port partner sends a Request message but since the explicit_contract
and vdm_sm_running are true from previous negotiation, the port ends
up sending Soft Reset instead of Accept msg.
Stub Log:
[ 203.653942] AMS DISCOVER_IDENTITY start
[ 203.653947] PD TX, header: 0x176f
[ 203.655901] PD TX complete, status: 0
[ 203.657470] PD RX, header: 0x124f [1]
[ 203.657477] Rx VDM cmd 0xff008081 type 2 cmd 1 len 1
[ 203.657482] AMS DISCOVER_IDENTITY finished
[ 203.657484] cc:=4
[ 204.155698] PD RX, header: 0x144f [1]
[ 204.155718] Rx VDM cmd 0xeeee8001 type 0 cmd 1 len 1
[ 204.155741] PD TX, header: 0x196f
[ 204.157622] PD TX complete, status: 0
[ 204.160060] PD RX, header: 0x4d [1]
[ 204.160066] state change SRC_READY -> SOFT_RESET [rev2 SOFT_RESET_AMS]
[ 204.160076] PD TX, header: 0x163
[ 204.162486] PD TX complete, status: 0
[ 204.162832] AMS SOFT_RESET_AMS finished
[ 204.162840] cc:=4
[ 204.162891] AMS POWER_NEGOTIATION start
[ 204.162896] state change SOFT_RESET -> AMS_START [rev2 POWER_NEGOTIATION]
[ 204.162908] state change AMS_START -> SRC_SEND_CAPABILITIES [rev2 POWER_NEGOTIATION]
[ 204.162913] PD TX, header: 0x1361
[ 204.165529] PD TX complete, status: 0
[ 204.165571] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES_TIMEOUT @ 60 ms [rev2 POWER_NEGOTIATION]
[ 204.166996] PD RX, header: 0x1242 [1]
[ 204.167009] state change SRC_SEND_CAPABILITIES -> SRC_SOFT_RESET_WAIT_SNK_TX [rev2 POWER_NEGOTIATION]
[ 204.167019] AMS POWER_NEGOTIATION finished
[ 204.167020] cc:=4
[ 204.167083] AMS SOFT_RESET_AMS start
[ 204.167086] state change SRC_SOFT_RESET_WAIT_SNK_TX -> SOFT_RESET_SEND [rev2 SOFT_RESET_AMS]
[ 204.167092] PD TX, header: 0x16d
[ 204.168824] PD TX complete, status: 0
[ 204.168854] pending state change SOFT_RESET_SEND -> HARD_RESET_SEND @ 60 ms [rev2 SOFT_RESET_AMS]
[ 204.171876] PD RX, header: 0x43 [1]
[ 204.171879] AMS SOFT_RESET_AMS finished
This causes COMMON.PROC.PD.11.2 check failure for
TEST.PD.VDM.SRC.2_Rev2Src test on the PD compliance tester.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Fixes: 8d3a0578ad1a ("usb: typec: tcpm: Respond Wait if VDM state machine is running")
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable <stable@kernel.org>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260414-fix-soft-reset-v1-1-01d7cb9764e2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 01af542392b5 ("usb: ulpi: fix double free in
ulpi_register_interface() error path") removed kfree(ulpi) from
ulpi_register_interface() to fix a double-free when device_register()
fails.
But when ulpi_of_register() or ulpi_read_id() fail before
device_register() is called, the ulpi allocation is leaked.
Add kfree(ulpi) on both error paths to properly clean up the allocation.
Fixes: 01af542392b5 ("usb: ulpi: fix double free in ulpi_register_interface() error path")
Cc: stable <stable@kernel.org>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260407-ulpi-v1-1-f3fafe53f7b2@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 65111084c63d7 ("USB: more omap_udc updates (dma and omap1710)")
added setting for DMA burst 4 mode. But I think this should be undone for
two reasons:
- It breaks DMA on 15xx boards - transfers just silently stall.
- On newer OMAP1 boards, like Nokia 770 (omap1710), there is no measurable
performance impact when testing TCP throughput with g_ether with large
15000 byte MTU size.
It's also worth noting that when the original change was made, the
OMAP_DMA_DATA_BURST_4 handling in arch/arm/plat-omap/dma.c was broken, and
actually resulted in the same as the OMAP_DMA_DATA_BURST_DIS i.e. burst
disabled. This was fixed not until a couple kernel releases later in an
unrelated commit 1a8bfa1eb998a ("[ARM] 3142/1: OMAP 2/5: Update files
common to omap1 and omap2").
So based on this it seems there was never really a very good reason to
enable this burst mode in omap_udc, so remove it now to allow 15xx DMA
to work again (it provides 2x throughput compared to PIO mode).
Fixes: 65111084c63d ("[PATCH] USB: more omap_udc updates (dma and omap1710)")
Cc: stable <stable@kernel.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Link: https://patch.msgid.link/ad06qHLclWHeSGnV@darkstar.musicnaut.iki.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Expose Cadence USBSSP through the same platform path as USBSS, trim
Kconfig and Makefile: one core loadable object plus separate glue .ko
files.
Single cdns.ko bundles core, DRD, the generic "cdns,usb3" platform
driver in cdns3-plat.c, optional host.o, and optional gadget objects.
Use CONFIG_USB_CDNS3_GADGET as a bool to compile gadget support into
that module. Remove duplicate MODULE_* declarations from cdns3-plat.c
now that it links into the same module.
Kconfig: the generic platform driver is selected via CONFIG_USB_CDNS3.
Move CONFIG_USB_CDNSP_PCI beside CONFIG_USB_CDNS3_PCI_WRAP under
"Platform glue driver support". SoC glue entries (TI, i.MX, StarFive)
depend only on CONFIG_USB_CDNS3.
Tighten CONFIG_USB_CDNS_SUPPORT dependencies so the umbrella follows
host or gadget when either is built as a module. Match host and gadget
bools to the cdns.ko tristate with USB=USB_CDNS3 and USB_GADGET=USB_CDNS3
instead of comparing against USB_CDNS_SUPPORT.
Link host.o when CONFIG_USB_CDNS3_HOST is enabled and use that symbol in
host-export.h, removing the redundant CONFIG_USB_CDNS_HOST indirection.
Export cdns_core_init_role and reorganize the function cdns_init, and
controller version could be gotten before the gadget init function is
decided per controller.
Keep host_init / gadget_init callbacks in struct cdns, so core.c does
not need direct linkage to host or gadget objects. Refactor cdnsp-pci.c
into a thin PCI-to-platform wrapper.
drivers/usb/Makefile: descend into drivers/usb/cdns3/ only when
CONFIG_USB_CDNS_SUPPORT is enabled.
Assisted-by: Cursor:claude-4.6-opus
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260421023459.506145-3-peter.chen@cixtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device controller may update vbus status via usb_udc_vbus_handler(),
which tries to connect the gadget even though gadget_bind_driver() has
already called usb_udc_connect_control_locked(). This causes pullup() to
be called twice. Avoid this by checking if gadget->connected is true.
This also set gadget->connected as false in usb_gadget_activate() if it
became connected while it was being deactivated. Otherwise,
usb_gadget_connect_locked will return early and pullup() won't be called.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260423095355.2673035-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Cadence CDNSP controller optionally supports eUSB2 (embedded USB2)
port. While this port type operates logically like high-speed USB 2.0,
it utilizes a different physical layer signaling.
This patch:
- Extends the port detection logic to recognize the eUSB2 protocol.
- Tracks the eUSB2 port offset in the cdnsp_device structure.
- Ensures that eUSB2 ports are correctly handled during Link State
transitions, specifically forcing L0 when LPM is capable, similar
to standard USB 2.0 ports.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260420-eusb2v2_upstream-v2-1-9883645e2ede@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the GL3590 4 ports USB3.2 hub.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
Link: https://patch.msgid.link/20260403100435.3477729-3-swati.agarwal@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In C, bitfields are not necessarily safe to modify from multiple
threads without locking. Switch "of_node_reused" over to the "flags"
field so modifications are safe.
Cc: Johan Hovold <johan@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # PCI_PWRCTRL
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260406162231.v5.8.I806b8636cd3724f6cd1f5e199318ab8694472d90@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, fnic, target, mpi3mr).
The substantive core changes are adding a 'serial' sysfs attribute and
getting sd to support > PAGE_SIZE sectors"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (98 commits)
scsi: target: Don't validate ignored fields in PROUT PREEMPT
scsi: qla2xxx: Use nr_cpu_ids instead of NR_CPUS for qp_cpu_map allocation
scsi: ufs: core: Disable timestamp for Kioxia THGJFJT0E25BAIP
scsi: mpi3mr: Fix typo
scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails
scsi: libsas: Delete unused to_dom_device() and to_dev_attr()
scsi: storvsc: Handle PERSISTENT_RESERVE_IN truncation for Hyper-V vFC
scsi: iscsi_tcp: Remove unneeded selections of CRYPTO and CRYPTO_MD5
scsi: lpfc: Update lpfc version to 15.0.0.0
scsi: lpfc: Add PCI ID support for LPe42100 series adapters
scsi: lpfc: Introduce 128G link speed selection and support
scsi: lpfc: Check ASIC_ID register to aid diagnostics during failed fw updates
scsi: lpfc: Update construction of SGL when XPSGL is enabled
scsi: lpfc: Remove deprecated PBDE feature
scsi: lpfc: Add REG_VFI mailbox cmd error handling
scsi: lpfc: Log MCQE contents for mbox commands with no context
scsi: lpfc: Select mailbox rq_create cmd version based on SLI4 if_type
scsi: lpfc: Break out of IRQ affinity assignment when mask reaches nr_cpu_ids
scsi: ufs: core: Make the header files self-contained
scsi: ufs: core: Remove an include directive from ufshcd-crypto.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support.
These changes did touch outside of drivers/usb/ but got acks from
the relevant mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits)
usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
dt-bindings: usb: dwc3: add support for StarFive JHB100
dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
usbip: tools: add hint when no exported devices are found
USB: serial: iuu_phoenix: fix iuutool author name
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
usb: gadget: f_hid: Add missing error code
usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions
dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding
USB: of: Simplify with scoped for each OF child loop
usbip: validate number_of_packets in usbip_pack_ret_submit()
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
usb: core: config: reverse the size check of the SSP isoc endpoint descriptor
usb: typec: ucsi: Set usb mode on partner change
...
|
|
JHB100 contains 2 dwc3 USB controllers and PHYs and working
as USB 2.0 speed. It can working in generic platform and
setting default properties.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Link: https://patch.msgid.link/20260410112500.90432-3-minda.chen@starfivetech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix typo in comment where 'seperate' should be 'separate'.
Signed-off-by: Qinghua Zhao <zqh1630@126.com>
Link: https://patch.msgid.link/20260409145428.18130-1-zqh1630@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial updates for 7.1-rc1
Here are the USB serial updates for 7.1-rc1, including:
- use strscpy() instead of strcpy()
- new modem device id
All have been in linux-next with no reported issues.
* tag 'usb-serial-7.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: iuu_phoenix: fix iuutool author name
USB: serial: option: add Telit Cinterion FN990A MBIM composition
USB: serial: ti_usb_3410_5052: use strscpy() instead of strcpy()
|
|
The original iuutool author is Juan Carlos Borrás - fix the spelling.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The block_len read from the host-supplied NTB header is checked against
ntb_max but has no lower bound. When block_len is smaller than
opts->ndp_size, the bounds check of:
ndp_index > (block_len - opts->ndp_size)
will underflow producing a huge unsigned value that ndp_index can never
exceed, defeating the check entirely.
The same underflow occurs in the datagram index checks against block_len
- opts->dpe_size. With those checks neutered, a malicious USB host can
choose ndp_index and datagram offsets that point past the actual
transfer, and the skb_put_data() copies adjacent kernel memory into the
network skb.
Fix this by rejecting block lengths that cannot hold at least the NTB
header plus one NDP. This will make block_len - opts->ndp_size and
block_len - opts->dpe_size both well-defined.
Commit 8d2b1a1ec9f5 ("CDC-NCM: avoid overflow in sanity checking") fixed
a related class of issues on the host side of NCM.
Fixes: 2b74b0a04d3e ("USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Link: https://patch.msgid.link/2026040753-baffle-handheld-624d@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A broken/bored/mean USB host can overflow the skb_shared_info->frags[]
array on a Linux gadget exposing a Phonet function by sending an
unbounded sequence of full-page OUT transfers.
pn_rx_complete() finalizes the skb only when req->actual < req->length,
where req->length is set to PAGE_SIZE by the gadget. If the host always
sends exactly PAGE_SIZE bytes per transfer, fp->rx.skb will never be
reset and each completion will add another fragment via
skb_add_rx_frag(). Once nr_frags exceeds MAX_SKB_FRAGS (default 17),
subsequent frag stores overwrite memory adjacent to the shinfo on the
heap.
Drop the skb and account a length error when the frag limit is reached,
matching the fix applied in t7xx by commit f0813bcd2d9d ("net: wwan:
t7xx: fix potential skb->frags overflow in RX path").
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Link: https://patch.msgid.link/2026040705-fruit-unloved-0701@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently in cdev_alloc() error path no error code is assigned.
Assign error code '-ENOMEM'.
Detected by Smatch:
drivers/usb/gadget/function/f_hid.c:1291 hidg_bind()
warn: missing error code 'status'
Fixes: 81ebd43cc0d6d ("usb: gadget: f_hid: don't call cdev_init while cdev in use")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Link: https://patch.msgid.link/20260402180008.64233-1-ethantidmore06@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for cros_ec_ucsi to load based on "google,cros-ec-ucsi"
compatible devices and "GOOG0021" ACPI nodes.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Link: https://patch.msgid.link/20260403223357.1896403-3-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260407013122.1296818-1-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a USB/IP client receives a RET_SUBMIT response,
usbip_pack_ret_submit() unconditionally overwrites
urb->number_of_packets from the network PDU. This value is
subsequently used as the loop bound in usbip_recv_iso() and
usbip_pad_iso() to iterate over urb->iso_frame_desc[], a flexible
array whose size was fixed at URB allocation time based on the
*original* number_of_packets from the CMD_SUBMIT.
A malicious USB/IP server can set number_of_packets in the response
to a value larger than what was originally submitted, causing a heap
out-of-bounds write when usbip_recv_iso() writes to
urb->iso_frame_desc[i] beyond the allocated region.
KASAN confirmed this with kernel 7.0.0-rc5:
BUG: KASAN: slab-out-of-bounds in usbip_recv_iso+0x46a/0x640
Write of size 4 at addr ffff888106351d40 by task vhci_rx/69
The buggy address is located 0 bytes to the right of
allocated 320-byte region [ffff888106351c00, ffff888106351d40)
The server side (stub_rx.c) and gadget side (vudc_rx.c) already
validate number_of_packets in the CMD_SUBMIT path since commits
c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle
malicious input") and b78d830f0049 ("usbip: fix vudc_rx: harden
CMD_SUBMIT path to handle malicious input"). The server side validates
against USBIP_MAX_ISO_PACKETS because no URB exists yet at that point.
On the client side we have the original URB, so we can use the tighter
bound: the response must not exceed the original number_of_packets.
This mirrors the existing validation of actual_length against
transfer_buffer_length in usbip_recv_xbuff(), which checks the
response value against the original allocation size.
Kelvin Mbogo's series ("usb: usbip: fix integer overflow in
usbip_recv_iso()", v2) hardens the receive-side functions themselves;
this patch complements that work by catching the bad value at its
source -- in usbip_pack_ret_submit() before the overwrite -- and
using the tighter per-URB allocation bound rather than the global
USBIP_MAX_ISO_PACKETS limit.
Fix this by checking rpdu->number_of_packets against
urb->number_of_packets in usbip_pack_ret_submit() before the
overwrite. On violation, clamp to zero so that usbip_recv_iso() and
usbip_pad_iso() safely return early.
Fixes: 1325f85fa49f ("staging: usbip: bugfix add number of packets for isochronous frames")
Cc: stable <stable@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Nathan Rebello <nathan.c.rebello@gmail.com>
Link: https://patch.msgid.link/20260402085259.234-1-nathan.c.rebello@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The GET_STATUS and SET/CLEAR_FEATURE handlers extract the endpoint
number from the host-supplied wIndex without any sort of validation.
Fix this up by validating the number of endpoints actually match up with
the number the device has before attempting to dereference a pointer
based on this math.
This is just like what was done in commit ee0d382feb44 ("usb: gadget:
aspeed_udc: validate endpoint index for ast udc") for the aspeed driver.
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Link: https://patch.msgid.link/2026040647-sincerity-untidy-b104@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reverse the check of the size of the usb_ssp_isoc_ep_comp_descriptor
structure to be done before accessing the structure itself.
Functionally, this doesn't really do anything as the buffer is all
internal to the kernel, and reading off the end is just fine, but static
checking tools get picky when noticing that a potential read could be
made "outside" of an allocated buffer.
Not a bugfix, but a cleanup to keep tools from tripping over this
constantly and annoying me with their pointless reports.
Link: https://patch.msgid.link/2026040630-graded-postwar-760f@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the partner usb_mode is only set in ucsi_register_partner().
If the partner enters USB4 operation after it is registered, this is not
reported to the typec class. The UCSI spec states that the Connector
Partner Changed bit can represent a Connector Partner Flags change. When
handling a UCSI partner change, check the partner flags for USB4
operation.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260402182438.867396-1-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Lenovo Yoga Book 9 14IAH10 (83KJ) has a composite USB device
(17EF:6161) that controls both touchscreens via a CDC ACM interface.
Interface 0 is a standard CDC ACM control interface, but interface 1
(the data interface) incorrectly declares vendor-specific class (0xFF)
instead of USB_CLASS_CDC_DATA. cdc-acm rejects the device at probe with
-EINVAL, leaving interface 0 unbound and EP 0x82 never polled.
With no consumer polling EP 0x82, the firmware's watchdog fires every
~20 seconds and resets the USB bus, producing a continuous disconnect/
reconnect loop that prevents the touchscreens from ever initialising.
Add two new quirk flags:
VENDOR_CLASS_DATA_IFACE: Bypasses the bInterfaceClass check in
acm_probe() that would otherwise reject the vendor-class data
interface with -EINVAL.
ALWAYS_POLL_CTRL: Submits the notification URB at probe() rather than
waiting for a TTY open. This keeps EP 0x82 polled at all times,
permanently suppressing the firmware watchdog. The URB is resubmitted
after port_shutdown() and on system resume. SET_CONTROL_LINE_STATE
(DTR|RTS) is sent at probe and after port_shutdown() to complete
firmware handshake.
Note: the firmware performs exactly 4 USB connect/disconnect cycles
(~19 s each) on every cold boot before stabilising. This is a fixed
firmware property; touch is available ~75-80 s after power-on.
Signed-off-by: Dave Carey <carvsdriver@gmail.com>
Cc: stable <stable@kernel.org>
Tested-by: Dave Carey <carvsdriver@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260402182950.389016-1-carvsdriver@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Expands range of matched bcdDevice values for the VL817 quirk entry.
This is based on experience with Axagon EE35-GTR rev1 3.5" HDD
enclosure, which reports its bcdDevice as 0x0843, but presumably other
vendors using this IC in their products may set it to any other value.
Signed-off-by: Daniel Brát <danek.brat@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260402172433.5227-1-danek.brat@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The usb role switch will update ID and VBUS states at the same time, and
vbus will not drop when execute data role swap in Type-C usecase. So lets
not wait vbus drop in usb role switch case too.
Fixes: e1b5d2bed67c ("usb: chipidea: core: handle usb role switch in a common way")
Cc: stable@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260402071457.2516021-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For USB role switch-triggered IRQ, ID and VBUS change come together, for
example when switching from host to device mode. ID indicate a role switch
and VBUS is required to determine whether the device controller can start
operating. Currently, ci_irq_handler() handles only a single event per
invocation. This can cause an issue where switching to device mode results
in the device controller not working at all. Allowing ci_irq_handler() to
handle both ID and VBUS change in one call resolves this issue.
Meanwhile, this change also affects the VBUS event handling logic.
Previously, if an ID event indicated host mode the VBUS IRQ will be
ignored as the device disable BSE when stop() is called. With the new
behavior, if ID and VBUS IRQ occur together and the target mode is host,
the VBUS event is queued and ci_handle_vbus_change() will call
usb_gadget_vbus_connect(), after which USBMODE is switched to device mode,
causing host mode to stop working. To prevent this, an additional check is
added to skip handling VBUS event when current role is not device mode.
Suggested-by: Peter Chen <peter.chen@kernel.org>
Fixes: e1b5d2bed67c ("usb: chipidea: core: handle usb role switch in a common way")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260402071457.2516021-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Current code is redundant, refactor the code, no function change.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260402071457.2516021-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Notifications can arrive before ucsi_init() has populated
ucsi->cap.num_connectors via GET_CAPABILITY. At that point
num_connectors is still 0, causing all valid connector numbers to be
incorrectly rejected as bogus.
Skip the bounds check when num_connectors is 0 (not yet initialized).
Pre-init notifications are already handled safely by the early-event
guard in ucsi_connector_change().
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: d2d8c17ac01a ("usb: typec: ucsi: validate connector number in ucsi_notify_common()")
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Rebello <nathan.c.rebello@gmail.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260407063958.863-1-nathan.c.rebello@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the following Telit Cinterion FN990A MBIM composition:
0x1074: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (diag) +
DPL (Data Packet Logging) + adb
T: Bus=01 Lev=01 Prnt=04 Port=06 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1074 Rev=05.04
S: Manufacturer=Telit Wireless Solutions
S: Product=FN990
S: SerialNumber=70628d0c
C: #Ifs= 8 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
We need the USB fixes in here to build on and for testing
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 6076388ca1eda808b95f9479f3b04839d348a2f7.
There were some build issues as reported by Arnd, so revert this for
now.
Cc: Peter Chen <peter.chen@cixtech.com>
Cc: Pawel Laszczak <pawell@cadence.com>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Link: https://lore.kernel.org/r/ac+LEWMCQpLSnfoD@nchen-desktop
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 7b7f2dd913829e06705035dfc41ca25fa6ec68d3.
There was some problems with an earlier cdns3 change, so this one needs
to be backed out as well.
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Reported-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/ac+LEWMCQpLSnfoD@nchen-desktop
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
xHCI hardware maintains its endpoint state between add_endpoint()
and drop_endpoint() calls followed by successful check_bandwidth().
So does the driver.
Core may call endpoint_disable() during xHCI endpoint life, so don't
clear host_ep->hcpriv then, because this breaks endpoint_reset().
If a driver calls usb_set_interface(), submits URBs which make host
sequence state non-zero and calls usb_clear_halt(), the device clears
its sequence state but xhci_endpoint_reset() bails out. The next URB
malfunctions: USB2 loses one packet, USB3 gets Transaction Error or
may not complete at all on some (buggy?) HCs from ASMedia and AMD.
This is triggered by uvcvideo on bulk video devices.
The code was copied from ehci_endpoint_disable() but it isn't needed
here - hcpriv should only be NULL on emulated root hub endpoints.
It might prevent resetting and inadvertently enabling a disabled and
dropped endpoint, but core shouldn't try to reset dropped endpoints.
Document xhci requirements regarding hcpriv. They are currently met.
Fixes: 18b74067ac78 ("xhci: Fix use-after-free regression in xhci clear hub TT implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-26-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Prefix "0x" is automatically added by '%pad'.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-25-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Function xhci_setup_port_arrays() limits the number of roothub ports
for both USB 2 and 3, this causes code repetition.
Solve this by moving roothub port limits validation to
xhci_create_rhub_port_array().
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-24-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Resume roothubs without checking 'retval' value, as it is always '0'.
Due to changes made in commit 79989bd4ab86 ("xhci: always resume roothubs
if xHC was reset during resume") the check is redundant.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-23-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Improve readability of xhci_hub_report_usb3_link_state().
Comments are shortened and clarified, and the code now makes it explicit
when the Port Link State (PLS) value is modified versus when other status
bits are updated.
No functional changes.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-22-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A previous patch renamed the temporary variable holding the value read
from the PORTSC register from 'temp' to 'portsc'. This patch follows up
by updating the parameter names of all helper functions called from
xhci_hub_control() that receive a PORTSC value, as well as the functions
they call.
Function changed:
xhci_get_port_status()
L xhci_get_usb3_port_status()
L xhci_hub_report_usb3_link_state()
L xhci_del_comp_mod_timer()
xhci_get_ext_port_status()
xhci_port_state_to_neutral()
xhci_clear_port_change_bit()
xhci_port_speed()
The reason for the rename is to differentiate between port
status/change bit to be written to PORTSC and replying to hub-class
USB requests. Each of them use their specific macros.
Use "portsc" name for PORTSC values and "status" for values intended
for replying to hub-class USB request.
A dedicated structure for USB hub port status responses
('struct usb_port_status' from ch11.h) exists and will be integrated in
a later patch.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-21-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The variable 'temp' is used multiple times throughout xhci_hub_control()
for holding only PORTSC register values.
As a follow-up to introducing a dedicated variable for PORTPMSC, rename
all remaining 'temp' to 'portsc'. This improves readability and clarifies
what is being modified.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-20-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The code handling U1/U2 timeout updates reads and modifies the PORTPMSC
register using the generic 'temp' variable, which is also used for
PORTSC. This makes the code hard to read and increases the risk of mixing
up register contents.
Introduce a dedicated 'portpmsc' variable for PORTPMSC accesses and use
it in both U1 and U2 timeout handlers. This makes the intent clearer and
keeps register operations logically separated.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-19-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
macros
The xhci driver uses two different sources for Port Link State (PLS):
1. The PLS field in the PORTSC register (bits 8:5).
2. The PLS value encoded in bits 15:8 of the USB request wIndex,
received by xhci_hub_control().
While both represent similar link states, they differ in a few details,
for example, xHCI's Resume State. Because of these differences, the xhci
driver defines its own set of PLS macros in xhci-port.h, which are intended
to be used when reading and writing PORTSC. The generic USB Chapter 11
macros in ch11.h should only be used when parsing or replying to hub-class
USB requests.
To avoid mixing these two representations and prevent incorrect state
reporting, replace all uses of Chapter 11 PLS macros with the xHCI
versions when interacting with the PORTSC register.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-18-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Several hub control requests encode a descriptor type in the upper byte
of 'wValue'. Clean this up by extracting the descriptor type into a local
variable and using it for all relevant requests.
Replace magic value (0x02) with the appropriate macro (HUB_EXT_PORT_STATUS)
This improves readability and makes the handling of 'wValue' consistent.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-17-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In Set Port Feature requests, the upper byte of 'wIndex' encodes
feature-specific parameters. The current code reads these upper bits in
an early pre-processing block, and then the same feature is handled again
later in the main switch statement. This results in duplicated condition
checks and makes the control flow harder to follow.
Move all feature-specific extraction of 'wIndex' upper bits into the
main SetPortFeature logic so that each feature is handled in exactly one
place. This reduces duplication, makes the handling clearer, and keeps
'wIndex' parsing local to the code that actually uses the values.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-16-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Several helper functions take a parameter named 'wIndex', but the
value they receive is not the raw USB request wIndex field. The only
function that actually processes the USB hub request parameter is
xhci_hub_control(), which extracts the relevant port number (and other
upper-byte fields) before passing them down.
To avoid confusion between the USB request parameter and the derived
0-based port index, rename all such function parameters from 'wIndex'
to 'portnum'. This improves readability and makes the call intentions
clearer.
When a function accept struct 'xhci_port' pointer, use its port number
instead.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-15-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The USB request parameter 'wIndex' is a 16-bit field whose meaning depends
on the request type. For hub port operations, only bits 7:0 encode the port
number (1..MaxPorts). Despite this, the current code extracts the port
number into 'portnum1' while also modifying and using 'wIndex' directly as
a 0-based port index. This dual use is both confusing and error-prone,
since 'wIndex' is not always a pure port number.
Clean this up by deriving a single 0-based 'portnum' from 'wIndex' and
using it throughout the function. The original 'wIndex' value is no longer
modified or treated as a port number. This also matches existing xhci code.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-14-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On resume from S4 (power loss after suspend/hibernation), the xHCI
driver previously freed, reallocated, and fully reinitialized all
data structures. Most of this is unnecessary because the data is
restored from a saved image; only the xHCI registers lose their values.
This patch optimizes S4 resume by performing only a host controller
reset, which includes:
* Freeing or clearing runtime-created data.
* Rewriting xHCI registers.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-13-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Improve debug output for suspend failures, particularly when the controller
handshake does not complete. This will become important as upcoming patches
significantly rework the resume path, making more detailed suspend-side
messages valuable for debugging.
Add an explicit check of the Save/Restore Error (SRE) flag after a
successful Save State (CSS) operation. The xHCI specification
(note in section 4.23.2) states:
"After a Save or Restore State operation completes, the
Save/Restore Error (SRE) flag in USBSTS should be checked to
ensure the operation completed successfully."
Currently, the SRE error is only observed and warning is printed.
This patch does not introduce deeper error handling, as the correct
response is unclear and changes to suspend behavior may risk regressions
once the resume path is updated.
Additionally, simplify and clean up the suspend USBSTS CSS/SSS
handling code, improving readability and quirk handling for AMD
SNPS xHC controllers that occasionally do not clear the SSS bit.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Separate allocation and initialization in the xHCI core:
* xhci_mem_init() now only handles memory allocation.
* xhci_init() now only handles initialization.
This split allows xhci_init() to be reused when resuming from S4
suspend-to-disk.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-11-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Initialize objects that exist for the lifetime of the driver only once,
rather than repeatedly. These objects do not require re-initialization
after events such as S4 (suspend-to-disk).
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move ring initialization from xhci_ring_alloc() to xhci_ring_init().
Call xhci_ring_init() after xhci_ring_alloc(); in the future,
it can also be used to re-initialize the ring during resume.
Additionally, remove xhci_dbg_trace() from xhci_mem_init(). The command
ring's first segment DMA address is now printed during the trace call in
xhci_ring_init().
This refactoring lays also the groundwork for eventually replacing:
* xhci_dbc_ring_init()
* xhci_clear_command_ring()
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the command ring TRB reservation from xhci_mem_init() to xhci_init().
Function xhci_mem_init() is intended for memory allocation,
while xhci_init() is for initialization.
This split allows xhci_init() to be reused when resuming from S4
suspend-to-disk.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce xhci_rh_bw_cleanup() to release all bandwidth tracking
structures associated with xHCI roothub ports.
The new helper clears:
* TT bandwidth entries
* Per-interval endpoint lists
This refactors and consolidates the existing per-port cleanup logic
previously embedded in xhci_mem_cleanup(), reducing duplication and
making the teardown sequence easier to follow.
The helper will also be reused for upcoming S4 resume handling.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A Restore Error or Host Controller Error indicates that the host controller
failed to resume after suspend. In such cases, the xhci driver is fully
re-initialized, similar to a post-hibernation scenario.
The existing error check is only relevant when 'power_lost' is false.
If 'power_lost' is true, a Restore or Controller error has no effect:
no warning is printed and the 'power_lost' state remains unchanged.
Move the entire error check into the if '!power_lost' condition
to make this dependency explicit and simplify the resume logic.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function compliance_mode_recovery_timer_init() is called from
xhci_init() because the Compliance Mode Recovery Timer (CMRT) must be set
up before xhci_run() when the xhci driver is re-initialized.
To handle this case, the boolean flag 'comp_timer_running' was introduced
to track whether xhci_run() had already been called, ensuring that
xhci_resume() would not invoke compliance_mode_recovery_timer_init()
a second time.
This can be simplified by moving the 'done' label in xhci_resume() to
after the compliance_mode_recovery_timer_init() call. With this change,
the timer initialization runs only when the xhci driver has not been
re-initialized, making the 'comp_timer_running' flag unnecessary and
allowing it to be removed.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace kernel USB speed numbers with xHCI protocol IDs expected by HW.
They are numerically equal up to high speed, but instead of SuperSpeed
we were querying SuperSpeed+.
Gen1 hardware rejects such commands with TRB Error, which resulted in
zero available bandwidth being shown.
While at that, report failures properly. No attempt made at "tunneling"
all possible comp codes through errno, debugfs users may inspect the
result through event-ring/trbs.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
USBSTS is mostly RW1C, so to clear EINT we should write just this
one bit. Remove pointless code which ORs the bit with current value
of the register, even though the bit is already known to be set,
and writes the result back, which clears all active RW1C flags.
We used to inadvertently clear PCD and SRE in this way. PCD isn't
used by the driver and SRE is only used at resume, so clearing them
should make no difference. Don't clear them anymore.
Tested by connecting and mounting a storage device on a few HCs.
Before: xhci_irq USBSTS 0x00000018 EINT PCD -> 0x00000000
xhci_irq USBSTS 0x00000008 EINT -> 0x00000000
After: xhci_irq USBSTS 0x00000018 EINT PCD -> 0x00000010 PCD
xhci_irq USBSTS 0x00000018 EINT PCD -> 0x00000010 PCD
Some flags are RsvdZ - should be written as zero regardless of the
value read, so technically it was a bug. But no problems are known.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We have the macro. Use it.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial device ids for 7.0-rc7
Here are some new modem and io_edgeport device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-7.0-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add MeiG Smart SRM825WN
USB: serial: io_edgeport: add support for Blackbox IC135A
USB: serial: option: add support for Rolling Wireless RW135R-GL
|
|
There was an issue when you did the following:
- setup and bind an hid gadget
- open /dev/hidg0
- use the resulting fd in EPOLL_CTL_ADD
- unbind the UDC
- bind the UDC
- use the fd in EPOLL_CTL_DEL
When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported
within remove_wait_queue (via ep_remove_wait_queue). After some
debugging I found out that the queues, which f_hid registers via
poll_wait were the problem. These were initialized using
init_waitqueue_head inside hidg_bind. So effectively, the bind function
re-initialized the queues while there were still items in them.
The solution is to move the initialization from hidg_bind to hidg_alloc
to extend their lifetimes to the lifetime of the function instance.
Additionally, I found many other possibly problematic init calls in the
bind function, which I moved as well.
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260331184844.2388761-1-sigmaepsilon92@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usbip_pad_iso() repositions ISO frame data within the transfer buffer
via memmove(). Neither the source offset (actualoffset, derived by
subtracting wire-supplied actual_length values) nor the destination
offset (iso_frame_desc[i].offset, taken directly from the wire) is
bounds-checked.
If a crafted actual_length wraps actualoffset negative through the
subtraction (see patch 2/3 for the root cause), the memmove source
points before the allocation - slab OOB read, data returned to
userspace.
Independently, iso_frame_desc[i].offset is never validated against
transfer_buffer_length. Setting offset past the end of the buffer
gives a fully controlled OOB write into whatever sits next in the
slab - confirmed with offset=400 on a 392-byte buffer, 64-byte write.
Add bounds checks for both the source and destination ranges before
each memmove call. Use unsigned comparisons after the sign check on
actualoffset to avoid signed/unsigned conversion surprises.
Signed-off-by: Kelvin Mbogo <addcontent08@gmail.com>
Link: https://patch.msgid.link/20260325103640.8090-3-addcontent08@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usbip_recv_iso() sums each frame's actual_length into an int
accumulator without checking the individual values first:
total_length += urb->iso_frame_desc[i].actual_length;
A malicious server can send actual_length = 0xFFFFFFFC for one frame
and a small value for the other, making the signed sum wrap around to
match urb->actual_length. The sanity check passes, and usbip_pad_iso()
later computes a negative actualoffset, feeding it to memmove() as a
source pointer - reads before the allocation, leaked to userspace via
USBDEVFS_REAPURB.
Reject any frame whose actual_length exceeds transfer_buffer_length
(one frame can't carry more data than the whole buffer), and widen the
accumulator to u32 so that many moderately-large frames can't wrap it
either.
Signed-off-by: Kelvin Mbogo <addcontent08@gmail.com>
Link: https://patch.msgid.link/20260325103640.8090-2-addcontent08@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usbip_recv_iso() computes the iso descriptor buffer size as:
int size = np * sizeof(*iso);
where np comes straight from the wire (urb->number_of_packets, set by
usbip_pack_ret_submit() before we get here). With np = 0x10000001 and
sizeof(*iso) == 16 the product is 0x100000010 which truncates to 16 on
a 32-bit int. kzalloc(16) succeeds but the following receive loop
writes np * 16 bytes into it - game over.
USBIP_MAX_ISO_PACKETS (1024) already exists in usbip_common.h for the
submit path but was never enforced on the receive side.
Clamp np to [1, USBIP_MAX_ISO_PACKETS] and switch to kcalloc() so
the allocator itself can catch overflows in the future. Fold the
existing np == 0 early return into the new bounds check.
usbip_pack_ret_submit() already copied the bogus np into
urb->number_of_packets before we run, so just returning -EPROTO is
not enough - processcompl() in the HCD will still iterate that many
iso_frame_desc entries when it completes the failed URB. Zero out
urb->number_of_packets before bailing to prevent that secondary crash
(confirmed on 6.12.0, processcompl+0x63 with CR2 in unmapped slab).
Signed-off-by: Kelvin Mbogo <addcontent08@gmail.com>
Link: https://patch.msgid.link/20260325103640.8090-1-addcontent08@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove usb_offload_get() and usb_offload_put() from the xHCI sideband
interrupter creation and removal paths.
The responsibility of manipulating offload_usage now lies entirely with
the USB class drivers. They have the precise context of when an offload
data stream actually starts and stops, ensuring a much more accurate
representation of offload activity for power management.
Cc: stable <stable@kernel.org>
Fixes: ef82a4803aab ("xhci: sideband: add api to trace sideband usage")
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Tested-by: Hailong Liu <hailong.liu@oppo.com>
Tested-by: hailong.liu@oppo.com
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260401123238.3790062-3-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
