diff options
| author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-07-05 16:48:00 -0700 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-07-05 16:48:00 -0700 |
| commit | e3f8ceca3b824d9e3299fb1565acd74d56b5adf3 (patch) | |
| tree | 72b5046d4ae71bb1f3b9923182ee87676c51aa5e | |
| parent | 01bbefb29bd8f474f7fbee571c84e1f6fc86e9ba (diff) | |
| download | patches-e3f8ceca3b824d9e3299fb1565acd74d56b5adf3.tar.gz | |
remove patches that are now in Linus's tree
| -rw-r--r-- | cdc-acm.patch | 115 | ||||
| -rw-r--r-- | series | 4 | ||||
| -rw-r--r-- | usb-serial-idr.patch | 597 | ||||
| -rw-r--r-- | usb-serial-increase-the-number-of-devices-we-support.patch | 76 | ||||
| -rw-r--r-- | usb-serial-ports-add-minor-and-port-number.patch | 1136 |
5 files changed, 0 insertions, 1928 deletions
diff --git a/cdc-acm.patch b/cdc-acm.patch deleted file mode 100644 index 80573ccb2ea33e..00000000000000 --- a/cdc-acm.patch +++ /dev/null @@ -1,115 +0,0 @@ -From foo@baz Fri Jun 7 11:21:41 PDT 2013 -Date: Fri, 07 Jun 2013 11:21:41 -0700 -To: Greg KH <gregkh@linuxfoundation.org> -From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -Subject: [PATCH] USB: cdc-acm: remove unneeded spinlock call on write path - -When writing data we were: - lock - do some work - unlock - call function - lock - do some work - unlock - return - return - -It turns out, that "function" was only ever called in the one place, so -instead of locking/unlocking for no good reason, just inline the -function and only grab the lock once. - -This has sped up the pathological case of sending 1 byte packets to a -loop-back cdc-acm device from 49600 bytes per second to 50100 bytes a -second on my workstation. A tiny increase yes, but noticable, and now -the spinlock isn't the hottest thing on the perf graph anymore. Yes, we -are still waiting for the hardware for the most part, but getting rid of -a spinlock_irq_save() call for every packet is still a good thing. - -And we end up deleting lines of code, always a win overall. - -This was found by using a Teensy 3.0 device and the test program and -firmware located at: - http://www.pjrc.com/teensy/benchmark_usb_serial_receive.html - -Reported-by: Paul Stoffregen <paul@pjrc.com> -Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> - ---- - drivers/usb/class/cdc-acm.c | 52 ++++++++++++++++---------------------------- - 1 file changed, 19 insertions(+), 33 deletions(-) - ---- a/drivers/usb/class/cdc-acm.c -+++ b/drivers/usb/class/cdc-acm.c -@@ -216,38 +216,6 @@ static int acm_start_wb(struct acm *acm, - return rc; - } - --static int acm_write_start(struct acm *acm, int wbn) --{ -- unsigned long flags; -- struct acm_wb *wb = &acm->wb[wbn]; -- int rc; -- -- spin_lock_irqsave(&acm->write_lock, flags); -- if (!acm->dev) { -- wb->use = 0; -- spin_unlock_irqrestore(&acm->write_lock, flags); -- return -ENODEV; -- } -- -- dev_vdbg(&acm->data->dev, "%s - susp_count %d\n", __func__, -- acm->susp_count); -- usb_autopm_get_interface_async(acm->control); -- if (acm->susp_count) { -- if (!acm->delayed_wb) -- acm->delayed_wb = wb; -- else -- usb_autopm_put_interface_async(acm->control); -- spin_unlock_irqrestore(&acm->write_lock, flags); -- return 0; /* A white lie */ -- } -- usb_mark_last_busy(acm->dev); -- -- rc = acm_start_wb(acm, wb); -- spin_unlock_irqrestore(&acm->write_lock, flags); -- -- return rc; -- --} - /* - * attributes exported through sysfs - */ -@@ -653,13 +621,31 @@ static int acm_tty_write(struct tty_stru - } - wb = &acm->wb[wbn]; - -+ if (!acm->dev) { -+ wb->use = 0; -+ spin_unlock_irqrestore(&acm->write_lock, flags); -+ return -ENODEV; -+ } -+ - count = (count > acm->writesize) ? acm->writesize : count; - dev_vdbg(&acm->data->dev, "%s - write %d\n", __func__, count); - memcpy(wb->buf, buf, count); - wb->len = count; -+ -+ usb_autopm_get_interface_async(acm->control); -+ if (acm->susp_count) { -+ if (!acm->delayed_wb) -+ acm->delayed_wb = wb; -+ else -+ usb_autopm_put_interface_async(acm->control); -+ spin_unlock_irqrestore(&acm->write_lock, flags); -+ return count; /* A white lie */ -+ } -+ usb_mark_last_busy(acm->dev); -+ -+ stat = acm_start_wb(acm, wb); - spin_unlock_irqrestore(&acm->write_lock, flags); - -- stat = acm_write_start(acm, wbn); - if (stat < 0) - return stat; - return count; @@ -29,10 +29,6 @@ usb-remove-unneeded-idr.h-include.patch usb-sl811-move-debug-files-from-proc-to-debugfs.patch usb-isp1362-move-debug-files-from-proc-to-debugfs.patch -cdc-acm.patch -usb-serial-ports-add-minor-and-port-number.patch -usb-serial-idr.patch -usb-serial-increase-the-number-of-devices-we-support.patch 0001-Simulate-fake-Fn-key-on-PS-2-keyboards-w-o-one-eg.-C.patch diff --git a/usb-serial-idr.patch b/usb-serial-idr.patch deleted file mode 100644 index 1769d13bbab824..00000000000000 --- a/usb-serial-idr.patch +++ /dev/null @@ -1,597 +0,0 @@ -From foo@baz Tue Jun 4 12:06:11 PDT 2013 -Date: Tue, 04 Jun 2013 12:06:11 -0700 -To: Greg KH <gregkh@linuxfoundation.org> -From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -Subject: [PATCH v3 2/3] USB: serial: make minor allocation dynamic - -This moves the allocation of minor device numbers from a static array to -be dynamic, using the idr interface. This means that you could -potentially get "gaps" in a minor number range for a single USB serial -device with multiple ports, but all should still work properly. - -We remove the 'minor' field from the usb_serial structure, as it no -longer makes any sense for it (use the field in the usb_serial_port -structure if you really want to know this number), and take the fact -that we were overloading a number in this field to determine if we had -initialized the minor numbers or not, and just use a flag variable -instead. - -Note, we still have the limitation of 255 USB to serial devices in the -system, as that is all we are registering with the TTY layer at this -point in time. - -Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> - ---- -Changes v2 - v3: - - fixed up comments about usb_serial_get_by_minor() - - fixed error case in usb_serial_get_by_minor() - - folded get_free_port() into get_free_serial() - - renamed get_free_serial() to allocate_minors() - - fixed console.c build breakage - - properly pass in minor port number to usb_serial_console_init() - - - drivers/staging/serqt_usb2/serqt_usb2.c | 15 +--- - drivers/usb/serial/ark3116.c | 2 - drivers/usb/serial/console.c | 6 - - drivers/usb/serial/f81232.c | 2 - drivers/usb/serial/io_edgeport.c | 2 - drivers/usb/serial/io_ti.c | 2 - drivers/usb/serial/mos7720.c | 2 - drivers/usb/serial/mos7840.c | 7 - - drivers/usb/serial/opticon.c | 2 - drivers/usb/serial/pl2303.c | 2 - drivers/usb/serial/quatech2.c | 2 - drivers/usb/serial/ssu100.c | 2 - drivers/usb/serial/ti_usb_3410_5052.c | 2 - drivers/usb/serial/usb-serial.c | 119 ++++++++++++++------------------ - drivers/usb/serial/usb_wwan.c | 2 - drivers/usb/serial/whiteheat.c | 2 - include/linux/usb/serial.h | 6 - - 17 files changed, 80 insertions(+), 97 deletions(-) - ---- a/drivers/staging/serqt_usb2/serqt_usb2.c -+++ b/drivers/staging/serqt_usb2/serqt_usb2.c -@@ -906,7 +906,7 @@ static int qt_open(struct tty_struct *tt - qt_submit_urb_from_open(serial, port); - } - -- dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor); -+ dev_dbg(&port->dev, "minor number is %d\n", port->minor); - dev_dbg(&port->dev, - "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress); - dev_dbg(&port->dev, -@@ -1002,7 +1002,7 @@ static void qt_close(struct usb_serial_p - status = 0; - - tty = tty_port_tty_get(&port->port); -- index = tty->index - serial->minor; -+ index = port->port_number; - - qt_port = qt_get_port_private(port); - port0 = qt_get_port_private(serial->port[0]); -@@ -1129,12 +1129,11 @@ static int qt_ioctl(struct tty_struct *t - { - struct usb_serial_port *port = tty->driver_data; - struct quatech_port *qt_port = qt_get_port_private(port); -- struct usb_serial *serial = get_usb_serial(port, __func__); - unsigned int index; - - dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); - -- index = tty->index - serial->minor; -+ index = port->port_number; - - if (cmd == TIOCMIWAIT) { - while (qt_port != NULL) { -@@ -1180,7 +1179,7 @@ static void qt_set_termios(struct tty_st - int baud, divisor, remainder; - int status; - -- index = tty->index - port->serial->minor; -+ index = port->port_number; - - switch (cflag & CSIZE) { - case CS5: -@@ -1296,7 +1295,7 @@ static void qt_break(struct tty_struct * - u16 index, onoff; - unsigned int result; - -- index = tty->index - serial->minor; -+ index = port->port_number; - - qt_port = qt_get_port_private(port); - -@@ -1325,7 +1324,7 @@ static inline int qt_real_tiocmget(struc - int status; - unsigned int index; - -- index = tty->index - serial->minor; -+ index = port->port_number; - status = - BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER, &mcr); - if (status >= 0) { -@@ -1364,7 +1363,7 @@ static inline int qt_real_tiocmset(struc - int status; - unsigned int index; - -- index = tty->index - serial->minor; -+ index = port->port_number; - status = - BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER, &mcr); - if (status < 0) ---- a/drivers/usb/serial/ark3116.c -+++ b/drivers/usb/serial/ark3116.c -@@ -413,7 +413,7 @@ static int ark3116_ioctl(struct tty_stru - /* XXX: Some of these values are probably wrong. */ - memset(&serstruct, 0, sizeof(serstruct)); - serstruct.type = PORT_16654; -- serstruct.line = port->serial->minor; -+ serstruct.line = port->minor; - serstruct.port = port->port_number; - serstruct.custom_divisor = 0; - serstruct.baud_base = 460800; ---- a/drivers/usb/serial/console.c -+++ b/drivers/usb/serial/console.c -@@ -108,18 +108,18 @@ static int usb_console_setup(struct cons - * no need to check the index here: if the index is wrong, console - * code won't call us - */ -- serial = usb_serial_get_by_index(co->index); -- if (serial == NULL) { -+ port = usb_serial_port_get_by_minor(co->index); -+ if (port == NULL) { - /* no device is connected yet, sorry :( */ - pr_err("No USB device connected to ttyUSB%i\n", co->index); - return -ENODEV; - } -+ serial = port->serial; - - retval = usb_autopm_get_interface(serial->interface); - if (retval) - goto error_get_interface; - -- port = serial->port[co->index - serial->minor]; - tty_port_tty_set(&port->port, NULL); - - info->port = port; ---- a/drivers/usb/serial/f81232.c -+++ b/drivers/usb/serial/f81232.c -@@ -294,7 +294,7 @@ static int f81232_ioctl(struct tty_struc - case TIOCGSERIAL: - memset(&ser, 0, sizeof ser); - ser.type = PORT_16654; -- ser.line = port->serial->minor; -+ ser.line = port->minor; - ser.port = port->port_number; - ser.baud_base = 460800; - ---- a/drivers/usb/serial/io_edgeport.c -+++ b/drivers/usb/serial/io_edgeport.c -@@ -1569,7 +1569,7 @@ static int get_serial_info(struct edgepo - memset(&tmp, 0, sizeof(tmp)); - - tmp.type = PORT_16550A; -- tmp.line = edge_port->port->serial->minor; -+ tmp.line = edge_port->port->minor; - tmp.port = edge_port->port->port_number; - tmp.irq = 0; - tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; ---- a/drivers/usb/serial/io_ti.c -+++ b/drivers/usb/serial/io_ti.c -@@ -2363,7 +2363,7 @@ static int get_serial_info(struct edgepo - memset(&tmp, 0, sizeof(tmp)); - - tmp.type = PORT_16550A; -- tmp.line = edge_port->port->serial->minor; -+ tmp.line = edge_port->port->minor; - tmp.port = edge_port->port->port_number; - tmp.irq = 0; - tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; ---- a/drivers/usb/serial/mos7720.c -+++ b/drivers/usb/serial/mos7720.c -@@ -1854,7 +1854,7 @@ static int get_serial_info(struct moschi - memset(&tmp, 0, sizeof(tmp)); - - tmp.type = PORT_16550A; -- tmp.line = mos7720_port->port->serial->minor; -+ tmp.line = mos7720_port->port->minor; - tmp.port = mos7720_port->port->port_number; - tmp.irq = 0; - tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; ---- a/drivers/usb/serial/mos7840.c -+++ b/drivers/usb/serial/mos7840.c -@@ -1057,7 +1057,7 @@ static int mos7840_open(struct tty_struc - * structures were not set up at that time.) */ - - dev_dbg(&port->dev, "port number is %d\n", port->port_number); -- dev_dbg(&port->dev, "minor number is %d\n", port->serial->minor); -+ dev_dbg(&port->dev, "minor number is %d\n", port->minor); - dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress); - dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress); - dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress); -@@ -2068,7 +2068,7 @@ static int mos7840_get_serial_info(struc - memset(&tmp, 0, sizeof(tmp)); - - tmp.type = PORT_16550A; -- tmp.line = mos7840_port->port->serial->minor; -+ tmp.line = mos7840_port->port->minor; - tmp.port = mos7840_port->port->port_number; - tmp.irq = 0; - tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; -@@ -2246,9 +2246,8 @@ static int mos7840_port_probe(struct usb - * usb-serial.c:get_free_serial() and cannot therefore be used - * to index device instances */ - mos7840_port->port_num = pnum + 1; -- dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor); -+ dev_dbg(&port->dev, "port->minor = %d\n", port->minor); - dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num); -- dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor); - - if (mos7840_port->port_num == 1) { - mos7840_port->SpRegOffset = 0x0; ---- a/drivers/usb/serial/opticon.c -+++ b/drivers/usb/serial/opticon.c -@@ -348,7 +348,7 @@ static int get_serial_info(struct usb_se - - /* fake emulate a 16550 uart to make userspace code happy */ - tmp.type = PORT_16550A; -- tmp.line = port->serial->minor; -+ tmp.line = port->minor; - tmp.port = 0; - tmp.irq = 0; - tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; ---- a/drivers/usb/serial/pl2303.c -+++ b/drivers/usb/serial/pl2303.c -@@ -641,7 +641,7 @@ static int pl2303_ioctl(struct tty_struc - case TIOCGSERIAL: - memset(&ser, 0, sizeof ser); - ser.type = PORT_16654; -- ser.line = port->serial->minor; -+ ser.line = port->minor; - ser.port = port->port_number; - ser.baud_base = 460800; - ---- a/drivers/usb/serial/quatech2.c -+++ b/drivers/usb/serial/quatech2.c -@@ -465,7 +465,7 @@ static int get_serial_info(struct usb_se - return -EFAULT; - - memset(&tmp, 0, sizeof(tmp)); -- tmp.line = port->serial->minor; -+ tmp.line = port->minor; - tmp.port = 0; - tmp.irq = 0; - tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; ---- a/drivers/usb/serial/ssu100.c -+++ b/drivers/usb/serial/ssu100.c -@@ -323,7 +323,7 @@ static int get_serial_info(struct usb_se - return -EFAULT; - - memset(&tmp, 0, sizeof(tmp)); -- tmp.line = port->serial->minor; -+ tmp.line = port->minor; - tmp.port = 0; - tmp.irq = 0; - tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; ---- a/drivers/usb/serial/ti_usb_3410_5052.c -+++ b/drivers/usb/serial/ti_usb_3410_5052.c -@@ -1309,7 +1309,7 @@ static int ti_get_serial_info(struct ti_ - memset(&ret_serial, 0, sizeof(ret_serial)); - - ret_serial.type = PORT_16550A; -- ret_serial.line = port->serial->minor; -+ ret_serial.line = port->minor; - ret_serial.port = port->port_number; - ret_serial.flags = tport->tp_flags; - ret_serial.xmit_fifo_size = TI_WRITE_BUF_SIZE; ---- a/drivers/usb/serial/usb-serial.c -+++ b/drivers/usb/serial/usb-serial.c -@@ -37,6 +37,7 @@ - #include <linux/usb.h> - #include <linux/usb/serial.h> - #include <linux/kfifo.h> -+#include <linux/idr.h> - #include "pl2303.h" - - #define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>" -@@ -49,72 +50,64 @@ - drivers depend on it. - */ - --static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; -+static DEFINE_IDR(serial_minors); - static DEFINE_MUTEX(table_lock); - static LIST_HEAD(usb_serial_driver_list); - - /* -- * Look up the serial structure. If it is found and it hasn't been -- * disconnected, return with its disc_mutex held and its refcount -- * incremented. Otherwise return NULL. -+ * Look up the serial port structure. If it is found and it hasn't been -+ * disconnected, return with the parent usb_serial structure's disc_mutex held -+ * and its refcount incremented. Otherwise return NULL. - */ --struct usb_serial *usb_serial_get_by_index(unsigned index) -+struct usb_serial_port *usb_serial_port_get_by_minor(unsigned minor) - { -- struct usb_serial *serial; -+ struct usb_serial *serial = NULL; -+ struct usb_serial_port *port; - - mutex_lock(&table_lock); -- serial = serial_table[index]; -+ port = idr_find(&serial_minors, minor); -+ if (!port) -+ goto exit; - -- if (serial) { -- mutex_lock(&serial->disc_mutex); -- if (serial->disconnected) { -- mutex_unlock(&serial->disc_mutex); -- serial = NULL; -- } else { -- kref_get(&serial->kref); -- } -+ serial = port->serial; -+ mutex_lock(&serial->disc_mutex); -+ if (serial->disconnected) { -+ mutex_unlock(&serial->disc_mutex); -+ port = NULL; -+ } else { -+ kref_get(&serial->kref); - } -+exit: - mutex_unlock(&table_lock); -- return serial; -+ return port; - } - --static struct usb_serial *get_free_serial(struct usb_serial *serial, -- int num_ports, unsigned int *minor) -+static int allocate_minors(struct usb_serial *serial, int num_ports) - { -+ struct usb_serial_port *port; - unsigned int i, j; -- int good_spot; -+ int minor; - - dev_dbg(&serial->interface->dev, "%s %d\n", __func__, num_ports); - -- *minor = 0; - mutex_lock(&table_lock); -- for (i = 0; i < SERIAL_TTY_MINORS; ++i) { -- if (serial_table[i]) -- continue; -- -- good_spot = 1; -- for (j = 1; j <= num_ports-1; ++j) -- if ((i+j >= SERIAL_TTY_MINORS) || (serial_table[i+j])) { -- good_spot = 0; -- i += j; -- break; -- } -- if (good_spot == 0) -- continue; -- -- *minor = i; -- j = 0; -- dev_dbg(&serial->interface->dev, "%s - minor base = %d\n", __func__, *minor); -- for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i, ++j) { -- serial_table[i] = serial; -- serial->port[j]->minor = i; -- serial->port[j]->port_number = i - *minor; -- } -- mutex_unlock(&table_lock); -- return serial; -+ for (i = 0; i < num_ports; ++i) { -+ port = serial->port[i]; -+ minor = idr_alloc(&serial_minors, port, 0, 0, GFP_KERNEL); -+ if (minor < 0) -+ goto error; -+ port->minor = minor; -+ port->port_number = i; - } -+ serial->minors_reserved = 1; - mutex_unlock(&table_lock); -- return NULL; -+ return 0; -+error: -+ /* unwind the already allocated minors */ -+ for (j = 0; j < i; ++j) -+ idr_remove(&serial_minors, serial->port[j]->minor); -+ mutex_unlock(&table_lock); -+ return minor; - } - - static void return_serial(struct usb_serial *serial) -@@ -123,8 +116,9 @@ static void return_serial(struct usb_ser - - mutex_lock(&table_lock); - for (i = 0; i < serial->num_ports; ++i) -- serial_table[serial->minor + i] = NULL; -+ idr_remove(&serial_minors, serial->port[i]->minor); - mutex_unlock(&table_lock); -+ serial->minors_reserved = 0; - } - - static void destroy_serial(struct kref *kref) -@@ -136,7 +130,7 @@ static void destroy_serial(struct kref * - serial = to_usb_serial(kref); - - /* return the minor range that this device had */ -- if (serial->minor != SERIAL_TTY_NO_MINOR) -+ if (serial->minors_reserved) - return_serial(serial); - - if (serial->attached && serial->type->release) -@@ -186,13 +180,11 @@ static int serial_install(struct tty_dri - struct usb_serial_port *port; - int retval = -ENODEV; - -- serial = usb_serial_get_by_index(idx); -- if (!serial) -+ port = usb_serial_port_get_by_minor(idx); -+ if (!port) - return retval; - -- port = serial->port[idx - serial->minor]; -- if (!port) -- goto error_no_port; -+ serial = port->serial; - if (!try_module_get(serial->type->driver.owner)) - goto error_module_get; - -@@ -219,7 +211,6 @@ static int serial_install(struct tty_dri - error_get_interface: - module_put(serial->type->driver.owner); - error_module_get: -- error_no_port: - usb_serial_put(serial); - mutex_unlock(&serial->disc_mutex); - return retval; -@@ -453,14 +444,16 @@ static int serial_break(struct tty_struc - static int serial_proc_show(struct seq_file *m, void *v) - { - struct usb_serial *serial; -+ struct usb_serial_port *port; - int i; - char tmp[40]; - - seq_puts(m, "usbserinfo:1.0 driver:2.0\n"); - for (i = 0; i < SERIAL_TTY_MINORS; ++i) { -- serial = usb_serial_get_by_index(i); -- if (serial == NULL) -+ port = usb_serial_port_get_by_minor(i); -+ if (port == NULL) - continue; -+ serial = port->serial; - - seq_printf(m, "%d:", i); - if (serial->type->driver.owner) -@@ -472,7 +465,7 @@ static int serial_proc_show(struct seq_f - le16_to_cpu(serial->dev->descriptor.idVendor), - le16_to_cpu(serial->dev->descriptor.idProduct)); - seq_printf(m, " num_ports:%d", serial->num_ports); -- seq_printf(m, " port:%d", i - serial->minor + 1); -+ seq_printf(m, " port:%d", port->port_number); - usb_make_path(serial->dev, tmp, sizeof(tmp)); - seq_printf(m, " path:%s", tmp); - -@@ -614,7 +607,7 @@ static struct usb_serial *create_serial( - serial->interface = usb_get_intf(interface); - kref_init(&serial->kref); - mutex_init(&serial->disc_mutex); -- serial->minor = SERIAL_TTY_NO_MINOR; -+ serial->minors_reserved = 0; - - return serial; - } -@@ -723,7 +716,6 @@ static int usb_serial_probe(struct usb_i - struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS]; - struct usb_serial_driver *type = NULL; - int retval; -- unsigned int minor; - int buffer_size; - int i; - int j; -@@ -1040,11 +1032,10 @@ static int usb_serial_probe(struct usb_i - */ - serial->disconnected = 1; - -- if (get_free_serial(serial, num_ports, &minor) == NULL) { -- dev_err(ddev, "No more free serial devices\n"); -+ if (allocate_minors(serial, num_ports)) { -+ dev_err(ddev, "No more free serial minor numbers\n"); - goto probe_error; - } -- serial->minor = minor; - - /* register all of the individual ports with the driver core */ - for (i = 0; i < num_ports; ++i) { -@@ -1060,7 +1051,7 @@ static int usb_serial_probe(struct usb_i - - serial->disconnected = 0; - -- usb_serial_console_init(minor); -+ usb_serial_console_init(serial->port[0]->minor); - exit: - module_put(type->driver.owner); - return 0; -@@ -1224,7 +1215,6 @@ static struct usb_driver usb_serial_driv - - static int __init usb_serial_init(void) - { -- int i; - int result; - - usb_serial_tty_driver = alloc_tty_driver(SERIAL_TTY_MINORS); -@@ -1232,9 +1222,6 @@ static int __init usb_serial_init(void) - return -ENOMEM; - - /* Initialize our global data */ -- for (i = 0; i < SERIAL_TTY_MINORS; ++i) -- serial_table[i] = NULL; -- - result = bus_register(&usb_serial_bus_type); - if (result) { - pr_err("%s - registering bus driver failed\n", __func__); ---- a/drivers/usb/serial/usb_wwan.c -+++ b/drivers/usb/serial/usb_wwan.c -@@ -124,7 +124,7 @@ static int get_serial_info(struct usb_se - return -EFAULT; - - memset(&tmp, 0, sizeof(tmp)); -- tmp.line = port->serial->minor; -+ tmp.line = port->minor; - tmp.port = port->port_number; - tmp.baud_base = tty_get_baud_rate(port->port.tty); - tmp.close_delay = port->port.close_delay / 10; ---- a/drivers/usb/serial/whiteheat.c -+++ b/drivers/usb/serial/whiteheat.c -@@ -461,7 +461,7 @@ static int whiteheat_ioctl(struct tty_st - case TIOCGSERIAL: - memset(&serstruct, 0, sizeof(serstruct)); - serstruct.type = PORT_16654; -- serstruct.line = port->serial->minor; -+ serstruct.line = port->minor; - serstruct.port = port->port_number; - serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - serstruct.xmit_fifo_size = kfifo_size(&port->write_fifo); ---- a/include/linux/usb/serial.h -+++ b/include/linux/usb/serial.h -@@ -21,7 +21,6 @@ - - #define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ - #define SERIAL_TTY_MINORS 254 /* loads of devices :) */ --#define SERIAL_TTY_NO_MINOR 255 /* No minor was assigned */ - - /* The maximum number of ports one device can grab at once */ - #define MAX_NUM_PORTS 8 -@@ -142,7 +141,6 @@ static inline void usb_set_serial_port_d - * @dev: pointer to the struct usb_device for this device - * @type: pointer to the struct usb_serial_driver for this device - * @interface: pointer to the struct usb_interface for this device -- * @minor: the starting minor number for this device - * @num_ports: the number of ports this device has - * @num_interrupt_in: number of interrupt in endpoints we have - * @num_interrupt_out: number of interrupt out endpoints we have -@@ -161,7 +159,7 @@ struct usb_serial { - unsigned char disconnected:1; - unsigned char suspending:1; - unsigned char attached:1; -- unsigned char minor; -+ unsigned char minors_reserved:1; - unsigned char num_ports; - unsigned char num_port_pointers; - char num_interrupt_in; -@@ -321,7 +319,7 @@ static inline void usb_serial_console_di - #endif - - /* Functions needed by other parts of the usbserial core */ --extern struct usb_serial *usb_serial_get_by_index(unsigned int minor); -+extern struct usb_serial_port *usb_serial_port_get_by_minor(unsigned int minor); - extern void usb_serial_put(struct usb_serial *serial); - extern int usb_serial_generic_open(struct tty_struct *tty, - struct usb_serial_port *port); diff --git a/usb-serial-increase-the-number-of-devices-we-support.patch b/usb-serial-increase-the-number-of-devices-we-support.patch deleted file mode 100644 index c41f28993467e1..00000000000000 --- a/usb-serial-increase-the-number-of-devices-we-support.patch +++ /dev/null @@ -1,76 +0,0 @@ -From foo@baz Wed Jun 5 10:45:16 PDT 2013 -Date: Wed, 05 Jun 2013 10:45:16 -0700 -To: Greg KH <gregkh@linuxfoundation.org> -From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -Subject: [PATCH v2 3/3] USB: serial: increase the number of devices we support - -We had the limit of 255 USB to serial devices on one system for almost -15 years, with no complaints. But now it's time to move on from these -tiny "baby" systems, and bump the number up to 512, which should last -us a few more years: - "512 is a nice number" -- Tobias Winter - -Note, this is still a static value, and uses up tty core memory with -this many tty devices allocated. Converting the driver to use -TTY_DRIVER_DYNAMIC_DEV is the next thing to do in order to remove this -limitation. - -Reported-by: Tobias Winter <tobias@linuxdingsda.de> -Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> - ---- - drivers/usb/serial/usb-serial.c | 9 ++++++--- - include/linux/usb/serial.h | 3 --- - 2 files changed, 6 insertions(+), 6 deletions(-) - ---- a/drivers/usb/serial/usb-serial.c -+++ b/drivers/usb/serial/usb-serial.c -@@ -43,6 +43,9 @@ - #define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>" - #define DRIVER_DESC "USB Serial Driver core" - -+#define USB_SERIAL_TTY_MAJOR 188 -+#define USB_SERIAL_TTY_MINORS 512 /* should be enough for a while */ -+ - /* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead - the MODULE_DEVICE_TABLE declarations in each serial driver - cause the "hotplug" program to pull in whatever module is necessary -@@ -449,7 +452,7 @@ static int serial_proc_show(struct seq_f - char tmp[40]; - - seq_puts(m, "usbserinfo:1.0 driver:2.0\n"); -- for (i = 0; i < SERIAL_TTY_MINORS; ++i) { -+ for (i = 0; i < USB_SERIAL_TTY_MINORS; ++i) { - port = usb_serial_port_get_by_minor(i); - if (port == NULL) - continue; -@@ -1217,7 +1220,7 @@ static int __init usb_serial_init(void) - { - int result; - -- usb_serial_tty_driver = alloc_tty_driver(SERIAL_TTY_MINORS); -+ usb_serial_tty_driver = alloc_tty_driver(USB_SERIAL_TTY_MINORS); - if (!usb_serial_tty_driver) - return -ENOMEM; - -@@ -1230,7 +1233,7 @@ static int __init usb_serial_init(void) - - usb_serial_tty_driver->driver_name = "usbserial"; - usb_serial_tty_driver->name = "ttyUSB"; -- usb_serial_tty_driver->major = SERIAL_TTY_MAJOR; -+ usb_serial_tty_driver->major = USB_SERIAL_TTY_MAJOR; - usb_serial_tty_driver->minor_start = 0; - usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; - usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL; ---- a/include/linux/usb/serial.h -+++ b/include/linux/usb/serial.h -@@ -19,9 +19,6 @@ - #include <linux/sysrq.h> - #include <linux/kfifo.h> - --#define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ --#define SERIAL_TTY_MINORS 254 /* loads of devices :) */ -- - /* The maximum number of ports one device can grab at once */ - #define MAX_NUM_PORTS 8 - diff --git a/usb-serial-ports-add-minor-and-port-number.patch b/usb-serial-ports-add-minor-and-port-number.patch deleted file mode 100644 index 7b106cdf249b11..00000000000000 --- a/usb-serial-ports-add-minor-and-port-number.patch +++ /dev/null @@ -1,1136 +0,0 @@ -From foo@baz Tue Jun 4 11:51:13 PDT 2013 -Date: Tue, 04 Jun 2013 11:51:13 -0700 -To: Greg KH <gregkh@linuxfoundation.org> -From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -Subject: [PATCH v2 1/3] USB: serial: ports: add minor and port number - -The usb_serial_port structure had the number field, which was the minor -number for the port, which almost no one really cared about. They -really wanted the number of the port within the device, which you had to -subtract from the minor of the parent usb_serial_device structure. To -clean this up, provide the real minor number of the port, and the number -of the port within the serial device separately, as these numbers might -not be related in the future. - -Bonus is that this cleans up a lot of logic in the drivers, and saves -lines overall. - -Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> - --- - drivers/staging/serqt_usb2/serqt_usb2.c | 21 +++-------- - drivers/usb/serial/ark3116.c | 2 - - drivers/usb/serial/bus.c | 6 +-- - drivers/usb/serial/console.c | 2 - - drivers/usb/serial/cp210x.c | 2 - - drivers/usb/serial/cypress_m8.c | 4 +- - drivers/usb/serial/digi_acceleport.c | 6 --- - drivers/usb/serial/f81232.c | 5 +- - drivers/usb/serial/garmin_gps.c | 6 +-- - drivers/usb/serial/io_edgeport.c | 58 ++++++++++++-------------------- - drivers/usb/serial/io_ti.c | 21 ++++------- - drivers/usb/serial/keyspan.c | 29 +++++++--------- - drivers/usb/serial/metro-usb.c | 4 +- - drivers/usb/serial/mos7720.c | 37 +++++++++----------- - drivers/usb/serial/mos7840.c | 52 +++++++++------------------- - drivers/usb/serial/opticon.c | 2 - - drivers/usb/serial/pl2303.c | 2 - - drivers/usb/serial/quatech2.c | 7 +-- - drivers/usb/serial/sierra.c | 2 - - drivers/usb/serial/ti_usb_3410_5052.c | 10 ++--- - drivers/usb/serial/usb-serial.c | 7 ++- - drivers/usb/serial/usb_wwan.c | 2 - - drivers/usb/serial/whiteheat.c | 20 +++++------ - include/linux/usb/serial.h | 6 ++- - 24 files changed, 133 insertions(+), 180 deletions(-) - ---- a/drivers/staging/serqt_usb2/serqt_usb2.c -+++ b/drivers/staging/serqt_usb2/serqt_usb2.c -@@ -873,7 +873,7 @@ static int qt_open(struct tty_struct *tt - result = qt_get_device(serial, &port0->DeviceData); - - /* Port specific setups */ -- result = qt_open_channel(serial, port->number, &ChannelData); -+ result = qt_open_channel(serial, port->port_number, &ChannelData); - if (result < 0) { - dev_dbg(&port->dev, "qt_open_channel failed\n"); - return result; -@@ -888,7 +888,7 @@ static int qt_open(struct tty_struct *tt - (SERIAL_MSR_CTS | SERIAL_MSR_DSR | SERIAL_MSR_RI | SERIAL_MSR_CD); - - /* Set Baud rate to default and turn off (default)flow control here */ -- result = qt_setuart(serial, port->number, DEFAULT_DIVISOR, DEFAULT_LCR); -+ result = qt_setuart(serial, port->port_number, DEFAULT_DIVISOR, DEFAULT_LCR); - if (result < 0) { - dev_dbg(&port->dev, "qt_setuart failed\n"); - return result; -@@ -906,7 +906,6 @@ static int qt_open(struct tty_struct *tt - qt_submit_urb_from_open(serial, port); - } - -- dev_dbg(&port->dev, "port number is %d\n", port->number); - dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor); - dev_dbg(&port->dev, - "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress); -@@ -1022,14 +1021,11 @@ static void qt_close(struct usb_serial_p - /* Close uart channel */ - status = qt_close_channel(serial, index); - if (status < 0) -- dev_dbg(&port->dev, -- "%s - port %d qt_close_channel failed.\n", -- __func__, port->number); -+ dev_dbg(&port->dev, "%s - qt_close_channel failed.\n", __func__); - - port0->open_ports--; - -- dev_dbg(&port->dev, "qt_num_open_ports in close%d:in port%d\n", -- port0->open_ports, port->number); -+ dev_dbg(&port->dev, "qt_num_open_ports in close%d\n", port0->open_ports); - - if (port0->open_ports == 0) { - if (serial->port[0]->interrupt_in_urb) { -@@ -1169,8 +1165,7 @@ static int qt_ioctl(struct tty_struct *t - return 0; - } - -- dev_dbg(&port->dev, "%s -No ioctl for that one. port = %d\n", -- __func__, port->number); -+ dev_dbg(&port->dev, "%s -No ioctl for that one.\n", __func__); - return -ENOIOCTLCMD; - } - -@@ -1245,8 +1240,7 @@ static void qt_set_termios(struct tty_st - - /* Now determine flow control */ - if (cflag & CRTSCTS) { -- dev_dbg(&port->dev, "%s - Enabling HW flow control port %d\n", -- __func__, port->number); -+ dev_dbg(&port->dev, "%s - Enabling HW flow control\n", __func__); - - /* Enable RTS/CTS flow control */ - status = BoxSetHW_FlowCtrl(port->serial, index, 1); -@@ -1258,8 +1252,7 @@ static void qt_set_termios(struct tty_st - } else { - /* Disable RTS/CTS flow control */ - dev_dbg(&port->dev, -- "%s - disabling HW flow control port %d\n", -- __func__, port->number); -+ "%s - disabling HW flow control\n", __func__); - - status = BoxSetHW_FlowCtrl(port->serial, index, 0); - if (status < 0) { ---- a/drivers/usb/serial/ark3116.c -+++ b/drivers/usb/serial/ark3116.c -@@ -414,7 +414,7 @@ static int ark3116_ioctl(struct tty_stru - memset(&serstruct, 0, sizeof(serstruct)); - serstruct.type = PORT_16654; - serstruct.line = port->serial->minor; -- serstruct.port = port->number; -+ serstruct.port = port->port_number; - serstruct.custom_divisor = 0; - serstruct.baud_base = 460800; - ---- a/drivers/usb/serial/bus.c -+++ b/drivers/usb/serial/bus.c -@@ -43,7 +43,7 @@ static ssize_t show_port_number(struct d - { - struct usb_serial_port *port = to_usb_serial_port(dev); - -- return sprintf(buf, "%d\n", port->number - port->serial->minor); -+ return sprintf(buf, "%d\n", port->port_number); - } - - static DEVICE_ATTR(port_number, S_IRUGO, show_port_number, NULL); -@@ -80,7 +80,7 @@ static int usb_serial_device_probe(struc - goto exit_with_autopm; - } - -- minor = port->number; -+ minor = port->minor; - tty_register_device(usb_serial_tty_driver, minor, dev); - dev_info(&port->serial->dev->dev, - "%s converter now attached to ttyUSB%d\n", -@@ -106,7 +106,7 @@ static int usb_serial_device_remove(stru - /* make sure suspend/resume doesn't race against port_remove */ - usb_autopm_get_interface(port->serial->interface); - -- minor = port->number; -+ minor = port->minor; - tty_unregister_device(usb_serial_tty_driver, minor); - - device_remove_file(&port->dev, &dev_attr_port_number); ---- a/drivers/usb/serial/console.c -+++ b/drivers/usb/serial/console.c -@@ -210,7 +210,7 @@ static void usb_console_write(struct con - if (count == 0) - return; - -- pr_debug("%s - port %d, %d byte(s)\n", __func__, port->number, count); -+ pr_debug("%s - minor %d, %d byte(s)\n", __func__, port->minor, count); - - if (!port->port.console) { - pr_debug("%s - port not opened\n", __func__); ---- a/drivers/usb/serial/cp210x.c -+++ b/drivers/usb/serial/cp210x.c -@@ -666,8 +666,6 @@ static void cp210x_set_termios(struct tt - unsigned int bits; - unsigned int modem_ctl[4]; - -- dev_dbg(dev, "%s - port %d\n", __func__, port->number); -- - if (!tty) - return; - ---- a/drivers/usb/serial/cypress_m8.c -+++ b/drivers/usb/serial/cypress_m8.c -@@ -435,7 +435,7 @@ static void cypress_set_dead(struct usb_ - spin_unlock_irqrestore(&priv->lock, flags); - - dev_err(&port->dev, "cypress_m8 suspending failing port %d - " -- "interval might be too short\n", port->number); -+ "interval might be too short\n", port->port_number); - } - - -@@ -667,7 +667,7 @@ static int cypress_write(struct tty_stru - { - struct cypress_private *priv = usb_get_serial_port_data(port); - -- dev_dbg(&port->dev, "%s - port %d, %d bytes\n", __func__, port->number, count); -+ dev_dbg(&port->dev, "%s - %d bytes\n", __func__, count); - - /* line control commands, which need to be executed immediately, - are not put into the buffer for obvious reasons. ---- a/drivers/usb/serial/digi_acceleport.c -+++ b/drivers/usb/serial/digi_acceleport.c -@@ -1304,11 +1304,7 @@ static void digi_release(struct usb_seri - - static int digi_port_probe(struct usb_serial_port *port) - { -- unsigned port_num; -- -- port_num = port->number - port->serial->minor; -- -- return digi_port_init(port, port_num); -+ return digi_port_init(port, port->port_number); - } - - static int digi_port_remove(struct usb_serial_port *port) ---- a/drivers/usb/serial/f81232.c -+++ b/drivers/usb/serial/f81232.c -@@ -288,15 +288,14 @@ static int f81232_ioctl(struct tty_struc - struct serial_struct ser; - struct usb_serial_port *port = tty->driver_data; - -- dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__, -- port->number, cmd); -+ dev_dbg(&port->dev, "%s cmd = 0x%04x\n", __func__, cmd); - - switch (cmd) { - case TIOCGSERIAL: - memset(&ser, 0, sizeof ser); - ser.type = PORT_16654; - ser.line = port->serial->minor; -- ser.port = port->number; -+ ser.port = port->port_number; - ser.baud_base = 460800; - - if (copy_to_user((void __user *)arg, &ser, sizeof ser)) ---- a/drivers/usb/serial/garmin_gps.c -+++ b/drivers/usb/serial/garmin_gps.c -@@ -948,9 +948,9 @@ static void garmin_close(struct usb_seri - { - struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); - -- dev_dbg(&port->dev, "%s - port %d - mode=%d state=%d flags=0x%X\n", -- __func__, port->number, garmin_data_p->mode, -- garmin_data_p->state, garmin_data_p->flags); -+ dev_dbg(&port->dev, "%s - mode=%d state=%d flags=0x%X\n", -+ __func__, garmin_data_p->mode, garmin_data_p->state, -+ garmin_data_p->flags); - - garmin_clear(garmin_data_p); - ---- a/drivers/usb/serial/io_edgeport.c -+++ b/drivers/usb/serial/io_edgeport.c -@@ -915,8 +915,8 @@ static int edge_open(struct tty_struct * - return -ENOMEM; - } - -- dev_dbg(dev, "%s(%d) - Initialize TX fifo to %d bytes\n", -- __func__, port->number, edge_port->maxTxCredits); -+ dev_dbg(dev, "%s - Initialize TX fifo to %d bytes\n", -+ __func__, edge_port->maxTxCredits); - - return 0; - } -@@ -1122,9 +1122,8 @@ static int edge_write(struct tty_struct - copySize = min((unsigned int)count, - (edge_port->txCredits - fifo->count)); - -- dev_dbg(&port->dev, "%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes\n", -- __func__, port->number, count, -- edge_port->txCredits - fifo->count, copySize); -+ dev_dbg(&port->dev, "%s of %d byte(s) Fifo room %d -- will copy %d bytes\n", -+ __func__, count, edge_port->txCredits - fifo->count, copySize); - - /* catch writes of 0 bytes which the tty driver likes to give us, - and when txCredits is empty */ -@@ -1216,9 +1215,8 @@ static void send_more_port_data(struct e - if (edge_port->write_in_progress || - !edge_port->open || - (fifo->count == 0)) { -- dev_dbg(dev, "%s(%d) EXIT - fifo %d, PendingWrite = %d\n", -- __func__, edge_port->port->number, -- fifo->count, edge_port->write_in_progress); -+ dev_dbg(dev, "%s EXIT - fifo %d, PendingWrite = %d\n", -+ __func__, fifo->count, edge_port->write_in_progress); - goto exit_send; - } - -@@ -1230,9 +1228,8 @@ static void send_more_port_data(struct e - * it's better to wait for more credits so we can do a larger write. - */ - if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) { -- dev_dbg(dev, "%s(%d) Not enough credit - fifo %d TxCredit %d\n", -- __func__, edge_port->port->number, fifo->count, -- edge_port->txCredits); -+ dev_dbg(dev, "%s Not enough credit - fifo %d TxCredit %d\n", -+ __func__, fifo->count, edge_port->txCredits); - goto exit_send; - } - -@@ -1256,10 +1253,8 @@ static void send_more_port_data(struct e - edge_port->write_in_progress = false; - goto exit_send; - } -- buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->number -- - edge_port->port->serial->minor, count); -- buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->number -- - edge_port->port->serial->minor, count); -+ buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->port_number, count); -+ buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->port_number, count); - - /* now copy our data */ - bytesleft = fifo->size - fifo->tail; -@@ -1377,8 +1372,7 @@ static int edge_chars_in_buffer(struct t - edge_port->txfifo.count; - spin_unlock_irqrestore(&edge_port->ep_lock, flags); - if (num_chars) { -- dev_dbg(&port->dev, "%s(port %d) - returns %d\n", __func__, -- port->number, num_chars); -+ dev_dbg(&port->dev, "%s - returns %d\n", __func__, num_chars); - } - - return num_chars; -@@ -1576,7 +1570,7 @@ static int get_serial_info(struct edgepo - - tmp.type = PORT_16550A; - tmp.line = edge_port->port->serial->minor; -- tmp.port = edge_port->port->number; -+ tmp.port = edge_port->port->port_number; - tmp.irq = 0; - tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - tmp.xmit_fifo_size = edge_port->maxTxCredits; -@@ -1601,15 +1595,15 @@ static int edge_ioctl(struct tty_struct - DEFINE_WAIT(wait); - struct edgeport_port *edge_port = usb_get_serial_port_data(port); - -- dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); -+ dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd); - - switch (cmd) { - case TIOCSERGETLSR: -- dev_dbg(&port->dev, "%s (%d) TIOCSERGETLSR\n", __func__, port->number); -+ dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__); - return get_lsr_info(edge_port, (unsigned int __user *) arg); - - case TIOCGSERIAL: -- dev_dbg(&port->dev, "%s (%d) TIOCGSERIAL\n", __func__, port->number); -+ dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__); - return get_serial_info(edge_port, (struct serial_struct __user *) arg); - } - return -ENOIOCTLCMD; -@@ -2181,9 +2175,8 @@ static int send_iosp_ext_cmd(struct edge - - currentCommand = buffer; - -- MAKE_CMD_EXT_CMD(¤tCommand, &length, -- edge_port->port->number - edge_port->port->serial->minor, -- command, param); -+ MAKE_CMD_EXT_CMD(¤tCommand, &length, edge_port->port->port_number, -+ command, param); - - status = write_cmd_usb(edge_port, buffer, length); - if (status) { -@@ -2266,18 +2259,16 @@ static int send_cmd_write_baud_rate(stru - int cmdLen = 0; - int divisor; - int status; -- unsigned char number = -- edge_port->port->number - edge_port->port->serial->minor; -+ u32 number = edge_port->port->port_number; - - if (edge_serial->is_epic && - !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) { -- dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d\n", -- edge_port->port->number, baudRate); -+ dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port, baud = %d\n", -+ baudRate); - return 0; - } - -- dev_dbg(dev, "%s - port = %d, baud = %d\n", __func__, -- edge_port->port->number, baudRate); -+ dev_dbg(dev, "%s - baud = %d\n", __func__, baudRate); - - status = calc_baud_rate_divisor(dev, baudRate, &divisor); - if (status) { -@@ -2388,9 +2379,8 @@ static int send_cmd_write_uart_register( - currCmd = cmdBuffer; - - /* Build a cmd in the buffer to write the given register */ -- MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, -- edge_port->port->number - edge_port->port->serial->minor, -- regNum, regValue); -+ MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, edge_port->port->port_number, -+ regNum, regValue); - - status = write_cmd_usb(edge_port, cmdBuffer, cmdLen); - if (status) { -@@ -2424,8 +2414,6 @@ static void change_port_settings(struct - __u8 txFlow; - int status; - -- dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number); -- - if (!edge_port->open && - !edge_port->openPending) { - dev_dbg(dev, "%s - port not opened\n", __func__); ---- a/drivers/usb/serial/io_ti.c -+++ b/drivers/usb/serial/io_ti.c -@@ -259,7 +259,7 @@ static int send_cmd(struct usb_device *d - /* clear tx/rx buffers and fifo in TI UMP */ - static int purge_port(struct usb_serial_port *port, __u16 mask) - { -- int port_number = port->number - port->serial->minor; -+ int port_number = port->port_number; - - dev_dbg(&port->dev, "%s - port %d, mask %x\n", __func__, port_number, mask); - -@@ -1392,7 +1392,8 @@ stayinbootmode: - - static int ti_do_config(struct edgeport_port *port, int feature, int on) - { -- int port_number = port->port->number - port->port->serial->minor; -+ int port_number = port->port->port_number; -+ - on = !!on; /* 1 or 0 not bitmask */ - return send_cmd(port->port->serial->dev, - feature, (__u8)(UMPM_UART1_PORT + port_number), -@@ -1637,7 +1638,7 @@ static void edge_bulk_in_callback(struct - return; - } - -- port_number = edge_port->port->number - edge_port->port->serial->minor; -+ port_number = edge_port->port->port_number; - - if (edge_port->lsr_event) { - edge_port->lsr_event = 0; -@@ -1730,7 +1731,7 @@ static int edge_open(struct tty_struct * - if (edge_port == NULL) - return -ENODEV; - -- port_number = port->number - port->serial->minor; -+ port_number = port->port_number; - switch (port_number) { - case 0: - edge_port->uart_base = UMPMEM_BASE_UART1; -@@ -1908,7 +1909,7 @@ static void edge_close(struct usb_serial - spin_unlock_irqrestore(&edge_port->ep_lock, flags); - - dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__); -- port_number = port->number - port->serial->minor; -+ port_number = port->port_number; - send_cmd(serial->dev, UMPC_CLOSE_PORT, - (__u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0); - -@@ -2137,10 +2138,7 @@ static void change_port_settings(struct - int baud; - unsigned cflag; - int status; -- int port_number = edge_port->port->number - -- edge_port->port->serial->minor; -- -- dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number); -+ int port_number = edge_port->port->port_number; - - config = kmalloc (sizeof (*config), GFP_KERNEL); - if (!config) { -@@ -2284,7 +2282,6 @@ static void edge_set_termios(struct tty_ - tty->termios.c_cflag, tty->termios.c_iflag); - dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, - old_termios->c_cflag, old_termios->c_iflag); -- dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); - - if (edge_port == NULL) - return; -@@ -2367,7 +2364,7 @@ static int get_serial_info(struct edgepo - - tmp.type = PORT_16550A; - tmp.line = edge_port->port->serial->minor; -- tmp.port = edge_port->port->number; -+ tmp.port = edge_port->port->port_number; - tmp.irq = 0; - tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - tmp.xmit_fifo_size = edge_port->port->bulk_out_size; -@@ -2386,7 +2383,7 @@ static int edge_ioctl(struct tty_struct - struct usb_serial_port *port = tty->driver_data; - struct edgeport_port *edge_port = usb_get_serial_port_data(port); - -- dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); -+ dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd); - - switch (cmd) { - case TIOCGSERIAL: ---- a/drivers/usb/serial/keyspan.c -+++ b/drivers/usb/serial/keyspan.c -@@ -152,7 +152,7 @@ static void keyspan_set_termios(struct t - p_priv = usb_get_serial_port_data(port); - d_details = p_priv->device_details; - cflag = tty->termios.c_cflag; -- device_port = port->number - port->serial->minor; -+ device_port = port->port_number; - - /* Baud rate calculation takes baud rate as an integer - so other rates can be generated if desired. */ -@@ -234,8 +234,8 @@ static int keyspan_write(struct tty_stru - dataOffset = 1; - } - -- dev_dbg(&port->dev, "%s - for port %d (%d chars), flip=%d\n", -- __func__, port->number, count, p_priv->out_flip); -+ dev_dbg(&port->dev, "%s - %d chars, flip=%d\n", __func__, count, -+ p_priv->out_flip); - - for (left = count; left > 0; left -= todo) { - todo = left; -@@ -1050,7 +1050,7 @@ static int keyspan_open(struct tty_struc - /* get the terminal config for the setup message now so we don't - * need to send 2 of them */ - -- device_port = port->number - port->serial->minor; -+ device_port = port->port_number; - if (tty) { - cflag = tty->termios.c_cflag; - /* Baud rate calculation takes baud rate as an integer -@@ -1556,7 +1556,7 @@ static int keyspan_usa26_send_setup(stru - s_priv = usb_get_serial_data(serial); - p_priv = usb_get_serial_port_data(port); - d_details = s_priv->device_details; -- device_port = port->number - port->serial->minor; -+ device_port = port->port_number; - - this_urb = p_priv->outcont_urb; - -@@ -1700,7 +1700,7 @@ static int keyspan_usa28_send_setup(stru - s_priv = usb_get_serial_data(serial); - p_priv = usb_get_serial_port_data(port); - d_details = s_priv->device_details; -- device_port = port->number - port->serial->minor; -+ device_port = port->port_number; - - /* only do something if we have a bulk out endpoint */ - this_urb = p_priv->outcont_urb; -@@ -1830,17 +1830,16 @@ static int keyspan_usa49_send_setup(stru - this_urb = s_priv->glocont_urb; - - /* Work out which port within the device is being setup */ -- device_port = port->number - port->serial->minor; -+ device_port = port->port_number; - - /* Make sure we have an urb then send the message */ - if (this_urb == NULL) { -- dev_dbg(&port->dev, "%s - oops no urb for port %d.\n", __func__, port->number); -+ dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__); - return -1; - } - -- dev_dbg(&port->dev, "%s - endpoint %d port %d (%d)\n", -- __func__, usb_pipeendpoint(this_urb->pipe), -- port->number, device_port); -+ dev_dbg(&port->dev, "%s - endpoint %d (%d)\n", -+ __func__, usb_pipeendpoint(this_urb->pipe), device_port); - - /* Save reset port val for resend. - Don't overwrite resend for open/close condition. */ -@@ -1855,7 +1854,6 @@ static int keyspan_usa49_send_setup(stru - - memset(&msg, 0, sizeof(struct keyspan_usa49_portControlMessage)); - -- /*msg.portNumber = port->number;*/ - msg.portNumber = device_port; - - /* Only set baud rate if it's changed */ -@@ -2145,12 +2143,11 @@ static int keyspan_usa67_send_setup(stru - this_urb = s_priv->glocont_urb; - - /* Work out which port within the device is being setup */ -- device_port = port->number - port->serial->minor; -+ device_port = port->port_number; - - /* Make sure we have an urb then send the message */ - if (this_urb == NULL) { -- dev_dbg(&port->dev, "%s - oops no urb for port %d.\n", __func__, -- port->number); -+ dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__); - return -1; - } - -@@ -2391,7 +2388,7 @@ static int keyspan_port_probe(struct usb - /* Setup values for the various callback routines */ - cback = &keyspan_callbacks[d_details->msg_format]; - -- port_num = port->number - port->serial->minor; -+ port_num = port->port_number; - - /* Do indat endpoints first, once for each flip */ - endp = d_details->indat_endpoints[port_num]; ---- a/drivers/usb/serial/metro-usb.c -+++ b/drivers/usb/serial/metro-usb.c -@@ -224,8 +224,8 @@ static int metrousb_open(struct tty_stru - result = metrousb_send_unidirectional_cmd(UNI_CMD_OPEN, port); - if (result) { - dev_err(&port->dev, -- "%s - failed to configure device for port number=%d, error code=%d\n", -- __func__, port->number, result); -+ "%s - failed to configure device, error code=%d\n", -+ __func__, result); - goto exit; - } - ---- a/drivers/usb/serial/mos7720.c -+++ b/drivers/usb/serial/mos7720.c -@@ -1047,7 +1047,7 @@ static int mos7720_open(struct tty_struc - * - * 0x08 : SP1/2 Control Reg - */ -- port_number = port->number - port->serial->minor; -+ port_number = port->port_number; - read_mos_reg(serial, port_number, LSR, &data); - - dev_dbg(&port->dev, "SS::%p LSR:%x\n", mos7720_port, data); -@@ -1066,7 +1066,7 @@ static int mos7720_open(struct tty_struc - - write_mos_reg(serial, port_number, SP_CONTROL_REG, 0x00); - read_mos_reg(serial, dummy, SP_CONTROL_REG, &data); -- data = data | (port->number - port->serial->minor + 1); -+ data = data | (port->port_number + 1); - write_mos_reg(serial, dummy, SP_CONTROL_REG, data); - mos7720_port->shadowLCR = 0x83; - write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR); -@@ -1147,8 +1147,8 @@ static void mos7720_close(struct usb_ser - usb_kill_urb(port->write_urb); - usb_kill_urb(port->read_urb); - -- write_mos_reg(serial, port->number - port->serial->minor, MCR, 0x00); -- write_mos_reg(serial, port->number - port->serial->minor, IER, 0x00); -+ write_mos_reg(serial, port->port_number, MCR, 0x00); -+ write_mos_reg(serial, port->port_number, IER, 0x00); - - mos7720_port->open = 0; - } -@@ -1172,8 +1172,7 @@ static void mos7720_break(struct tty_str - data = mos7720_port->shadowLCR & ~UART_LCR_SBC; - - mos7720_port->shadowLCR = data; -- write_mos_reg(serial, port->number - port->serial->minor, -- LCR, mos7720_port->shadowLCR); -+ write_mos_reg(serial, port->port_number, LCR, mos7720_port->shadowLCR); - } - - /* -@@ -1304,8 +1303,8 @@ static void mos7720_throttle(struct tty_ - /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios.c_cflag & CRTSCTS) { - mos7720_port->shadowMCR &= ~UART_MCR_RTS; -- write_mos_reg(port->serial, port->number - port->serial->minor, -- MCR, mos7720_port->shadowMCR); -+ write_mos_reg(port->serial, port->port_number, MCR, -+ mos7720_port->shadowMCR); - if (status != 0) - return; - } -@@ -1336,8 +1335,8 @@ static void mos7720_unthrottle(struct tt - /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios.c_cflag & CRTSCTS) { - mos7720_port->shadowMCR |= UART_MCR_RTS; -- write_mos_reg(port->serial, port->number - port->serial->minor, -- MCR, mos7720_port->shadowMCR); -+ write_mos_reg(port->serial, port->port_number, MCR, -+ mos7720_port->shadowMCR); - if (status != 0) - return; - } -@@ -1361,7 +1360,7 @@ static int set_higher_rates(struct mosch - * Init Sequence for higher rates - ***********************************************/ - dev_dbg(&port->dev, "Sending Setting Commands ..........\n"); -- port_number = port->number - port->serial->minor; -+ port_number = port->port_number; - - write_mos_reg(serial, port_number, IER, 0x00); - write_mos_reg(serial, port_number, FCR, 0x00); -@@ -1487,7 +1486,7 @@ static int send_cmd_write_baud_rate(stru - port = mos7720_port->port; - serial = port->serial; - -- number = port->number - port->serial->minor; -+ number = port->port_number; - dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudrate); - - /* Calculate the Divisor */ -@@ -1538,7 +1537,7 @@ static void change_port_settings(struct - - port = mos7720_port->port; - serial = port->serial; -- port_number = port->number - port->serial->minor; -+ port_number = port->port_number; - - if (!mos7720_port->open) { - dev_dbg(&port->dev, "%s - port not opened\n", __func__); -@@ -1731,7 +1730,7 @@ static int get_lsr_info(struct tty_struc - struct usb_serial_port *port = tty->driver_data; - unsigned int result = 0; - unsigned char data = 0; -- int port_number = port->number - port->serial->minor; -+ int port_number = port->port_number; - int count; - - count = mos7720_chars_in_buffer(tty); -@@ -1793,8 +1792,8 @@ static int mos7720_tiocmset(struct tty_s - mcr &= ~UART_MCR_LOOP; - - mos7720_port->shadowMCR = mcr; -- write_mos_reg(port->serial, port->number - port->serial->minor, -- MCR, mos7720_port->shadowMCR); -+ write_mos_reg(port->serial, port->port_number, MCR, -+ mos7720_port->shadowMCR); - - return 0; - } -@@ -1838,8 +1837,8 @@ static int set_modem_info(struct moschip - } - - mos7720_port->shadowMCR = mcr; -- write_mos_reg(port->serial, port->number - port->serial->minor, -- MCR, mos7720_port->shadowMCR); -+ write_mos_reg(port->serial, port->port_number, MCR, -+ mos7720_port->shadowMCR); - - return 0; - } -@@ -1856,7 +1855,7 @@ static int get_serial_info(struct moschi - - tmp.type = PORT_16550A; - tmp.line = mos7720_port->port->serial->minor; -- tmp.port = mos7720_port->port->number; -+ tmp.port = mos7720_port->port->port_number; - tmp.irq = 0; - tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; ---- a/drivers/usb/serial/mos7840.c -+++ b/drivers/usb/serial/mos7840.c -@@ -303,15 +303,12 @@ static int mos7840_set_uart_reg(struct u - /* For the UART control registers, the application number need - to be Or'ed */ - if (port->serial->num_ports == 4) { -- val |= (((__u16) port->number - -- (__u16) (port->serial->minor)) + 1) << 8; -+ val |= ((__u16)port->port_number + 1) << 8; - } else { -- if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { -- val |= (((__u16) port->number - -- (__u16) (port->serial->minor)) + 1) << 8; -+ if (port->port_number == 0) { -+ val |= ((__u16)port->port_number + 1) << 8; - } else { -- val |= (((__u16) port->number - -- (__u16) (port->serial->minor)) + 2) << 8; -+ val |= ((__u16)port->port_number + 2) << 8; - } - } - dev_dbg(&port->dev, "%s application number is %x\n", __func__, val); -@@ -340,16 +337,12 @@ static int mos7840_get_uart_reg(struct u - - /* Wval is same as application number */ - if (port->serial->num_ports == 4) { -- Wval = -- (((__u16) port->number - (__u16) (port->serial->minor)) + -- 1) << 8; -+ Wval = ((__u16)port->port_number + 1) << 8; - } else { -- if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { -- Wval = (((__u16) port->number - -- (__u16) (port->serial->minor)) + 1) << 8; -+ if (port->port_number == 0) { -+ Wval = ((__u16)port->port_number + 1) << 8; - } else { -- Wval = (((__u16) port->number - -- (__u16) (port->serial->minor)) + 2) << 8; -+ Wval = ((__u16)port->port_number + 2) << 8; - } - } - dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval); -@@ -631,9 +624,7 @@ static void mos7840_interrupt_callback(s - - for (i = 0; i < serial->num_ports; i++) { - mos7840_port = mos7840_get_port_private(serial->port[i]); -- wval = -- (((__u16) serial->port[i]->number - -- (__u16) (serial->minor)) + 1) << 8; -+ wval = ((__u16)serial->port[i]->port_number + 1) << 8; - if (mos7840_port->open) { - if (sp[i] & 0x01) { - dev_dbg(&urb->dev->dev, "SP%d No Interrupt !!!\n", i); -@@ -1065,8 +1056,8 @@ static int mos7840_open(struct tty_struc - * (can't set it up in mos7840_startup as the * - * structures were not set up at that time.) */ - -- dev_dbg(&port->dev, "port number is %d\n", port->number); -- dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor); -+ dev_dbg(&port->dev, "port number is %d\n", port->port_number); -+ dev_dbg(&port->dev, "minor number is %d\n", port->serial->minor); - dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress); - dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress); - dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress); -@@ -1074,9 +1065,7 @@ static int mos7840_open(struct tty_struc - mos7840_port->read_urb = port->read_urb; - - /* set up our bulk in urb */ -- if ((serial->num_ports == 2) -- && ((((__u16)port->number - -- (__u16)(port->serial->minor)) % 2) != 0)) { -+ if ((serial->num_ports == 2) && (((__u16)port->port_number % 2) != 0)) { - usb_fill_bulk_urb(mos7840_port->read_urb, - serial->dev, - usb_rcvbulkpipe(serial->dev, -@@ -1199,7 +1188,7 @@ static void mos7840_close(struct usb_ser - mos7840_port->read_urb_busy = false; - - port0->open_ports--; -- dev_dbg(&port->dev, "%s in close%d:in port%d\n", __func__, port0->open_ports, port->number); -+ dev_dbg(&port->dev, "%s in close%d\n", __func__, port0->open_ports); - if (port0->open_ports == 0) { - if (serial->port[0]->interrupt_in_urb) { - dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n"); -@@ -1435,9 +1424,7 @@ static int mos7840_write(struct tty_stru - memcpy(urb->transfer_buffer, current_position, transfer_size); - - /* fill urb with data and submit */ -- if ((serial->num_ports == 2) -- && ((((__u16)port->number - -- (__u16)(port->serial->minor)) % 2) != 0)) { -+ if ((serial->num_ports == 2) && (((__u16)port->port_number % 2) != 0)) { - usb_fill_bulk_urb(urb, - serial->dev, - usb_sndbulkpipe(serial->dev, -@@ -1732,10 +1719,9 @@ static int mos7840_send_cmd_write_baud_r - if (mos7840_serial_paranoia_check(port->serial, __func__)) - return -1; - -- number = mos7840_port->port->number - mos7840_port->port->serial->minor; -+ number = mos7840_port->port->port_number; - -- dev_dbg(&port->dev, "%s - port = %d, baud = %d\n", __func__, -- mos7840_port->port->number, baudRate); -+ dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudRate); - /* reset clk_uart_sel in spregOffset */ - if (baudRate > 115200) { - #ifdef HW_flow_control -@@ -2016,7 +2002,6 @@ static void mos7840_set_termios(struct t - tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag)); - dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, - old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); -- dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); - - /* change the port settings to the new ones specified */ - -@@ -2084,7 +2069,7 @@ static int mos7840_get_serial_info(struc - - tmp.type = PORT_16550A; - tmp.line = mos7840_port->port->serial->minor; -- tmp.port = mos7840_port->port->number; -+ tmp.port = mos7840_port->port->port_number; - tmp.irq = 0; - tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; -@@ -2240,7 +2225,7 @@ static int mos7840_port_probe(struct usb - /* we set up the pointers to the endpoints in the mos7840_open * - * function, as the structures aren't created yet. */ - -- pnum = port->number - serial->minor; -+ pnum = port->port_number; - - dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum); - mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); -@@ -2261,7 +2246,6 @@ static int mos7840_port_probe(struct usb - * usb-serial.c:get_free_serial() and cannot therefore be used - * to index device instances */ - mos7840_port->port_num = pnum + 1; -- dev_dbg(&port->dev, "port->number = %d\n", port->number); - dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor); - dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num); - dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor); ---- a/drivers/usb/serial/opticon.c -+++ b/drivers/usb/serial/opticon.c -@@ -367,7 +367,7 @@ static int opticon_ioctl(struct tty_stru - { - struct usb_serial_port *port = tty->driver_data; - -- dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); -+ dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd); - - switch (cmd) { - case TIOCGSERIAL: ---- a/drivers/usb/serial/pl2303.c -+++ b/drivers/usb/serial/pl2303.c -@@ -642,7 +642,7 @@ static int pl2303_ioctl(struct tty_struc - memset(&ser, 0, sizeof ser); - ser.type = PORT_16654; - ser.line = port->serial->minor; -- ser.port = port->number; -+ ser.port = port->port_number; - ser.baud_base = 460800; - - if (copy_to_user((void __user *)arg, &ser, sizeof ser)) ---- a/drivers/usb/serial/quatech2.c -+++ b/drivers/usb/serial/quatech2.c -@@ -343,7 +343,7 @@ static int qt2_open(struct tty_struct *t - int status; - unsigned long flags; - -- device_port = (u16) (port->number - port->serial->minor); -+ device_port = port->port_number; - - serial = port->serial; - -@@ -388,9 +388,8 @@ static int qt2_open(struct tty_struct *t - status = qt2_set_port_config(serial->dev, device_port, - DEFAULT_BAUD_RATE, UART_LCR_WLEN8); - if (status < 0) { -- dev_err(&port->dev, -- "%s - initial setup failed for port %i (%i)\n", -- __func__, port->number, device_port); -+ dev_err(&port->dev, "%s - initial setup failed (%i)\n", -+ __func__, device_port); - return status; - } - ---- a/drivers/usb/serial/sierra.c -+++ b/drivers/usb/serial/sierra.c -@@ -914,7 +914,7 @@ static int sierra_port_probe(struct usb_ - /* This is really the usb-serial port number of the interface - * rather than the interface number. - */ -- ifnum = port->number - serial->minor; -+ ifnum = port->port_number; - himemoryp = &typeA_interface_list; - } - ---- a/drivers/usb/serial/ti_usb_3410_5052.c -+++ b/drivers/usb/serial/ti_usb_3410_5052.c -@@ -477,7 +477,7 @@ static int ti_open(struct tty_struct *tt - if (mutex_lock_interruptible(&tdev->td_open_close_lock)) - return -ERESTARTSYS; - -- port_number = port->number - port->serial->minor; -+ port_number = port->port_number; - - tport->tp_msr = 0; - tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR); -@@ -619,7 +619,7 @@ static void ti_close(struct usb_serial_p - kfifo_reset_out(&tport->write_fifo); - spin_unlock_irqrestore(&tport->tp_lock, flags); - -- port_number = port->number - port->serial->minor; -+ port_number = port->port_number; - - dev_dbg(&port->dev, "%s - sending TI_CLOSE_PORT\n", __func__); - status = ti_command_out_sync(tdev, TI_CLOSE_PORT, -@@ -777,7 +777,7 @@ static void ti_set_termios(struct tty_st - tcflag_t cflag, iflag; - int baud; - int status; -- int port_number = port->number - port->serial->minor; -+ int port_number = port->port_number; - unsigned int mcr; - - cflag = tty->termios.c_cflag; -@@ -1263,7 +1263,7 @@ static int ti_get_lsr(struct ti_port *tp - int size, status; - struct ti_device *tdev = tport->tp_tdev; - struct usb_serial_port *port = tport->tp_port; -- int port_number = port->number - port->serial->minor; -+ int port_number = port->port_number; - struct ti_port_status *data; - - size = sizeof(struct ti_port_status); -@@ -1310,7 +1310,7 @@ static int ti_get_serial_info(struct ti_ - - ret_serial.type = PORT_16550A; - ret_serial.line = port->serial->minor; -- ret_serial.port = port->number - port->serial->minor; -+ ret_serial.port = port->port_number; - ret_serial.flags = tport->tp_flags; - ret_serial.xmit_fifo_size = TI_WRITE_BUF_SIZE; - ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800; ---- a/drivers/usb/serial/usb-serial.c -+++ b/drivers/usb/serial/usb-serial.c -@@ -105,9 +105,10 @@ static struct usb_serial *get_free_seria - *minor = i; - j = 0; - dev_dbg(&serial->interface->dev, "%s - minor base = %d\n", __func__, *minor); -- for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) { -+ for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i, ++j) { - serial_table[i] = serial; -- serial->port[j++]->number = i; -+ serial->port[j]->minor = i; -+ serial->port[j]->port_number = i - *minor; - } - mutex_unlock(&table_lock); - return serial; -@@ -1048,7 +1049,7 @@ static int usb_serial_probe(struct usb_i - /* register all of the individual ports with the driver core */ - for (i = 0; i < num_ports; ++i) { - port = serial->port[i]; -- dev_set_name(&port->dev, "ttyUSB%d", port->number); -+ dev_set_name(&port->dev, "ttyUSB%d", port->minor); - dev_dbg(ddev, "registering %s", dev_name(&port->dev)); - device_enable_async_suspend(&port->dev); - ---- a/drivers/usb/serial/usb_wwan.c -+++ b/drivers/usb/serial/usb_wwan.c -@@ -125,7 +125,7 @@ static int get_serial_info(struct usb_se - - memset(&tmp, 0, sizeof(tmp)); - tmp.line = port->serial->minor; -- tmp.port = port->number; -+ tmp.port = port->port_number; - tmp.baud_base = tty_get_baud_rate(port->port.tty); - tmp.close_delay = port->port.close_delay / 10; - tmp.closing_wait = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ? ---- a/drivers/usb/serial/whiteheat.c -+++ b/drivers/usb/serial/whiteheat.c -@@ -462,7 +462,7 @@ static int whiteheat_ioctl(struct tty_st - memset(&serstruct, 0, sizeof(serstruct)); - serstruct.type = PORT_16654; - serstruct.line = port->serial->minor; -- serstruct.port = port->number; -+ serstruct.port = port->port_number; - serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - serstruct.xmit_fifo_size = kfifo_size(&port->write_fifo); - serstruct.custom_divisor = 0; -@@ -626,7 +626,7 @@ static int firm_open(struct usb_serial_p - { - struct whiteheat_simple open_command; - -- open_command.port = port->number - port->serial->minor + 1; -+ open_command.port = port->port_number + 1; - return firm_send_command(port, WHITEHEAT_OPEN, - (__u8 *)&open_command, sizeof(open_command)); - } -@@ -636,7 +636,7 @@ static int firm_close(struct usb_serial_ - { - struct whiteheat_simple close_command; - -- close_command.port = port->number - port->serial->minor + 1; -+ close_command.port = port->port_number + 1; - return firm_send_command(port, WHITEHEAT_CLOSE, - (__u8 *)&close_command, sizeof(close_command)); - } -@@ -649,7 +649,7 @@ static void firm_setup_port(struct tty_s - struct whiteheat_port_settings port_settings; - unsigned int cflag = tty->termios.c_cflag; - -- port_settings.port = port->number - port->serial->minor + 1; -+ port_settings.port = port->port_number + 1; - - /* get the byte size */ - switch (cflag & CSIZE) { -@@ -726,7 +726,7 @@ static int firm_set_rts(struct usb_seria - { - struct whiteheat_set_rdb rts_command; - -- rts_command.port = port->number - port->serial->minor + 1; -+ rts_command.port = port->port_number + 1; - rts_command.state = onoff; - return firm_send_command(port, WHITEHEAT_SET_RTS, - (__u8 *)&rts_command, sizeof(rts_command)); -@@ -737,7 +737,7 @@ static int firm_set_dtr(struct usb_seria - { - struct whiteheat_set_rdb dtr_command; - -- dtr_command.port = port->number - port->serial->minor + 1; -+ dtr_command.port = port->port_number + 1; - dtr_command.state = onoff; - return firm_send_command(port, WHITEHEAT_SET_DTR, - (__u8 *)&dtr_command, sizeof(dtr_command)); -@@ -748,7 +748,7 @@ static int firm_set_break(struct usb_ser - { - struct whiteheat_set_rdb break_command; - -- break_command.port = port->number - port->serial->minor + 1; -+ break_command.port = port->port_number + 1; - break_command.state = onoff; - return firm_send_command(port, WHITEHEAT_SET_BREAK, - (__u8 *)&break_command, sizeof(break_command)); -@@ -759,7 +759,7 @@ static int firm_purge(struct usb_serial_ - { - struct whiteheat_purge purge_command; - -- purge_command.port = port->number - port->serial->minor + 1; -+ purge_command.port = port->port_number + 1; - purge_command.what = rxtx; - return firm_send_command(port, WHITEHEAT_PURGE, - (__u8 *)&purge_command, sizeof(purge_command)); -@@ -770,7 +770,7 @@ static int firm_get_dtr_rts(struct usb_s - { - struct whiteheat_simple get_dr_command; - -- get_dr_command.port = port->number - port->serial->minor + 1; -+ get_dr_command.port = port->port_number + 1; - return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, - (__u8 *)&get_dr_command, sizeof(get_dr_command)); - } -@@ -780,7 +780,7 @@ static int firm_report_tx_done(struct us - { - struct whiteheat_simple close_command; - -- close_command.port = port->number - port->serial->minor + 1; -+ close_command.port = port->port_number + 1; - return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, - (__u8 *)&close_command, sizeof(close_command)); - } ---- a/include/linux/usb/serial.h -+++ b/include/linux/usb/serial.h -@@ -37,7 +37,8 @@ - * @serial: pointer back to the struct usb_serial owner of this port. - * @port: pointer to the corresponding tty_port for this port. - * @lock: spinlock to grab when updating portions of this structure. -- * @number: the number of the port (the minor number). -+ * @minor: the minor number of the port -+ * @port_number: the struct usb_serial port number of this port (starts at 0) - * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. - * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. - * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe -@@ -80,7 +81,8 @@ struct usb_serial_port { - struct usb_serial *serial; - struct tty_port port; - spinlock_t lock; -- unsigned char number; -+ u32 minor; -+ u8 port_number; - - unsigned char *interrupt_in_buffer; - struct urb *interrupt_in_urb; |