diff options
Diffstat (limited to 'usb')
13 files changed, 1797 insertions, 0 deletions
diff --git a/usb/pci-change-device-runtime-pm-settings-for-probe-and-remove-do-not-send.patch b/usb/pci-change-device-runtime-pm-settings-for-probe-and-remove-do-not-send.patch new file mode 100644 index 00000000000000..3e61171f4e4b16 --- /dev/null +++ b/usb/pci-change-device-runtime-pm-settings-for-probe-and-remove-do-not-send.patch @@ -0,0 +1,160 @@ +From stern@rowland.harvard.edu Wed Jul 7 14:56:24 2010 +From: Alan Stern <stern@rowland.harvard.edu> +Date: Fri, 25 Jun 2010 15:18:32 -0400 (EDT) +Subject: PCI: change device runtime PM settings for probe and remove - DO NOT SEND +To: Greg KH <greg@kroah.com> +Message-ID: <Pine.LNX.4.44L0.1006251516110.1322-100000@iolanthe.rowland.org> + +DO NOT SEND TO LINUS, is going through the linux-pci tree. + +This patch (as1388) changes the way the PCI core handles runtime PM +settings when probing or unbinding drivers. Now the core will make +sure the device is enabled for runtime PM, with a usage count >= 1, +when a driver is probed. It does the same when calling a driver's +remove method. + +If the driver wants to use runtime PM, all it has to do is call +pm_runtime_pu_noidle() near the end of its probe routine (to cancel +the core's usage increment) and pm_runtime_get_noresume() near the +start of its remove routine (to restore the usage count). It does not +need to mess around with setting the runtime state to enabled, +disabled, active, or suspended. + +The patch updates e1000e and r8169, the only PCI drivers that already +use the existing runtime PM interface. + +Signed-off-by: Alan Stern <stern@rowland.harvard.edu> +Acked-by: Rafael J. Wysocki <rjw@sisk.pl> + +--- + drivers/net/e1000e/netdev.c | 16 ++++------------ + drivers/net/r8169.c | 16 ++++------------ + drivers/pci/pci-driver.c | 30 ++++++++++++++++++++++++++++-- + 3 files changed, 36 insertions(+), 26 deletions(-) + +--- a/drivers/net/e1000e/netdev.c ++++ b/drivers/net/e1000e/netdev.c +@@ -5721,11 +5721,8 @@ static int __devinit e1000_probe(struct + + e1000_print_device_info(adapter); + +- if (pci_dev_run_wake(pdev)) { +- pm_runtime_set_active(&pdev->dev); +- pm_runtime_enable(&pdev->dev); +- } +- pm_schedule_suspend(&pdev->dev, MSEC_PER_SEC); ++ if (pci_dev_run_wake(pdev)) ++ pm_runtime_put_noidle(&pdev->dev); + + return 0; + +@@ -5771,8 +5768,6 @@ static void __devexit e1000_remove(struc + struct e1000_adapter *adapter = netdev_priv(netdev); + bool down = test_bit(__E1000_DOWN, &adapter->state); + +- pm_runtime_get_sync(&pdev->dev); +- + /* + * flush_scheduled work may reschedule our watchdog task, so + * explicitly disable watchdog tasks from being rescheduled +@@ -5797,11 +5792,8 @@ static void __devexit e1000_remove(struc + clear_bit(__E1000_DOWN, &adapter->state); + unregister_netdev(netdev); + +- if (pci_dev_run_wake(pdev)) { +- pm_runtime_disable(&pdev->dev); +- pm_runtime_set_suspended(&pdev->dev); +- } +- pm_runtime_put_noidle(&pdev->dev); ++ if (pci_dev_run_wake(pdev)) ++ pm_runtime_get_noresume(&pdev->dev); + + /* + * Release control of h/w to f/w. If f/w is AMT enabled, this +--- a/drivers/net/r8169.c ++++ b/drivers/net/r8169.c +@@ -3219,11 +3219,8 @@ rtl8169_init_one(struct pci_dev *pdev, c + + device_set_wakeup_enable(&pdev->dev, tp->features & RTL_FEATURE_WOL); + +- if (pci_dev_run_wake(pdev)) { +- pm_runtime_set_active(&pdev->dev); +- pm_runtime_enable(&pdev->dev); +- } +- pm_runtime_idle(&pdev->dev); ++ if (pci_dev_run_wake(pdev)) ++ pm_runtime_put_noidle(&pdev->dev); + + out: + return rc; +@@ -3246,17 +3243,12 @@ static void __devexit rtl8169_remove_one + struct net_device *dev = pci_get_drvdata(pdev); + struct rtl8169_private *tp = netdev_priv(dev); + +- pm_runtime_get_sync(&pdev->dev); +- + flush_scheduled_work(); + + unregister_netdev(dev); + +- if (pci_dev_run_wake(pdev)) { +- pm_runtime_disable(&pdev->dev); +- pm_runtime_set_suspended(&pdev->dev); +- } +- pm_runtime_put_noidle(&pdev->dev); ++ if (pci_dev_run_wake(pdev)) ++ pm_runtime_get_noresume(&pdev->dev); + + /* restore original MAC address */ + rtl_rar_set(tp, dev->perm_addr); +--- a/drivers/pci/pci-driver.c ++++ b/drivers/pci/pci-driver.c +@@ -289,8 +289,26 @@ struct drv_dev_and_id { + static long local_pci_probe(void *_ddi) + { + struct drv_dev_and_id *ddi = _ddi; ++ struct device *dev = &ddi->dev->dev; ++ int rc; + +- return ddi->drv->probe(ddi->dev, ddi->id); ++ /* Unbound PCI devices are always set to disabled and suspended. ++ * During probe, the device is set to enabled and active and the ++ * usage count is incremented. If the driver supports runtime PM, ++ * it should call pm_runtime_put_noidle() in its probe routine and ++ * pm_runtime_get_noresume() in its remove routine. ++ */ ++ pm_runtime_get_noresume(dev); ++ pm_runtime_set_active(dev); ++ pm_runtime_enable(dev); ++ ++ rc = ddi->drv->probe(ddi->dev, ddi->id); ++ if (rc) { ++ pm_runtime_disable(dev); ++ pm_runtime_set_suspended(dev); ++ pm_runtime_put_noidle(dev); ++ } ++ return rc; + } + + static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, +@@ -369,11 +387,19 @@ static int pci_device_remove(struct devi + struct pci_driver * drv = pci_dev->driver; + + if (drv) { +- if (drv->remove) ++ if (drv->remove) { ++ pm_runtime_get_sync(dev); + drv->remove(pci_dev); ++ pm_runtime_put_noidle(dev); ++ } + pci_dev->driver = NULL; + } + ++ /* Undo the runtime PM settings in local_pci_probe() */ ++ pm_runtime_disable(dev); ++ pm_runtime_set_suspended(dev); ++ pm_runtime_put_noidle(dev); ++ + /* + * If the device is still on, set the power state as "unknown", + * since it might change by the next time we load the driver. diff --git a/usb/usb-add-do_wakeup-parameter-for-pci-hcd-suspend.patch b/usb/usb-add-do_wakeup-parameter-for-pci-hcd-suspend.patch new file mode 100644 index 00000000000000..ae3cf5cc1440fd --- /dev/null +++ b/usb/usb-add-do_wakeup-parameter-for-pci-hcd-suspend.patch @@ -0,0 +1,158 @@ +From stern@rowland.harvard.edu Wed Jul 7 14:55:22 2010 +From: Alan Stern <stern@rowland.harvard.edu> +Date: Fri, 25 Jun 2010 14:02:14 -0400 (EDT) +Subject: USB: add do_wakeup parameter for PCI HCD suspend +To: Greg KH <greg@kroah.com> +Message-ID: <Pine.LNX.4.44L0.1006251241070.1604-100000@iolanthe.rowland.org> + + +This patch (as1385) adds a "do_wakeup" parameter to the pci_suspend +method used by PCI-based host controller drivers. ehci-hcd in +particular needs to know whether or not to enable wakeup when +suspending a controller. Although that information is currently +available through device_may_wakeup(), when support is added for +runtime suspend this will no longer be true. + +Signed-off-by: Alan Stern <stern@rowland.harvard.edu> +Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> + +--- + drivers/usb/core/hcd-pci.c | 4 +++- + drivers/usb/host/ehci-au1xxx.c | 2 +- + drivers/usb/host/ehci-fsl.c | 3 ++- + drivers/usb/host/ehci-hub.c | 5 ++--- + drivers/usb/host/ehci-pci.c | 4 ++-- + drivers/usb/host/ehci.h | 8 ++++---- + drivers/usb/host/ohci-pci.c | 2 +- + drivers/usb/host/uhci-hcd.c | 2 +- + include/linux/usb/hcd.h | 2 +- + 9 files changed, 17 insertions(+), 15 deletions(-) + +--- a/drivers/usb/core/hcd-pci.c ++++ b/drivers/usb/core/hcd-pci.c +@@ -386,7 +386,9 @@ static int hcd_pci_suspend(struct device + return retval; + + if (hcd->driver->pci_suspend) { +- retval = hcd->driver->pci_suspend(hcd); ++ bool do_wakeup = device_may_wakeup(dev); ++ ++ retval = hcd->driver->pci_suspend(hcd, do_wakeup); + suspend_report_result(hcd->driver->pci_suspend, retval); + if (retval) + return retval; +--- a/drivers/usb/host/ehci-au1xxx.c ++++ b/drivers/usb/host/ehci-au1xxx.c +@@ -228,7 +228,7 @@ static int ehci_hcd_au1xxx_drv_suspend(s + * the root hub is either suspended or stopped. + */ + spin_lock_irqsave(&ehci->lock, flags); +- ehci_prepare_ports_for_controller_suspend(ehci); ++ ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); + ehci_writel(ehci, 0, &ehci->regs->intr_enable); + (void)ehci_readl(ehci, &ehci->regs->intr_enable); + +--- a/drivers/usb/host/ehci-fsl.c ++++ b/drivers/usb/host/ehci-fsl.c +@@ -313,7 +313,8 @@ static int ehci_fsl_drv_suspend(struct d + struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); + void __iomem *non_ehci = hcd->regs; + +- ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd)); ++ ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), ++ device_may_wakeup(dev)); + if (!fsl_deep_sleep()) + return 0; + +--- a/drivers/usb/host/ehci-hub.c ++++ b/drivers/usb/host/ehci-hub.c +@@ -107,7 +107,7 @@ static void ehci_handover_companion_port + } + + static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, +- bool suspending) ++ bool suspending, bool do_wakeup) + { + int port; + u32 temp; +@@ -117,8 +117,7 @@ static void ehci_adjust_port_wakeup_flag + * when the controller is suspended or resumed. In all other + * cases they don't need to be changed. + */ +- if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || +- device_may_wakeup(ehci_to_hcd(ehci)->self.controller)) ++ if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup) + return; + + /* clear phy low-power mode before changing wakeup flags */ +--- a/drivers/usb/host/ehci-pci.c ++++ b/drivers/usb/host/ehci-pci.c +@@ -277,7 +277,7 @@ done: + * Also they depend on separate root hub suspend/resume. + */ + +-static int ehci_pci_suspend(struct usb_hcd *hcd) ++static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) + { + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + unsigned long flags; +@@ -291,7 +291,7 @@ static int ehci_pci_suspend(struct usb_h + * the root hub is either suspended or stopped. + */ + spin_lock_irqsave (&ehci->lock, flags); +- ehci_prepare_ports_for_controller_suspend(ehci); ++ ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup); + ehci_writel(ehci, 0, &ehci->regs->intr_enable); + (void)ehci_readl(ehci, &ehci->regs->intr_enable); + +--- a/drivers/usb/host/ehci.h ++++ b/drivers/usb/host/ehci.h +@@ -540,11 +540,11 @@ struct ehci_fstn { + + /* Prepare the PORTSC wakeup flags during controller suspend/resume */ + +-#define ehci_prepare_ports_for_controller_suspend(ehci) \ +- ehci_adjust_port_wakeup_flags(ehci, true); ++#define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup) \ ++ ehci_adjust_port_wakeup_flags(ehci, true, do_wakeup); + +-#define ehci_prepare_ports_for_controller_resume(ehci) \ +- ehci_adjust_port_wakeup_flags(ehci, false); ++#define ehci_prepare_ports_for_controller_resume(ehci) \ ++ ehci_adjust_port_wakeup_flags(ehci, false, false); + + /*-------------------------------------------------------------------------*/ + +--- a/drivers/usb/host/ohci-pci.c ++++ b/drivers/usb/host/ohci-pci.c +@@ -392,7 +392,7 @@ static int __devinit ohci_pci_start (str + + #ifdef CONFIG_PM + +-static int ohci_pci_suspend(struct usb_hcd *hcd) ++static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) + { + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + unsigned long flags; +--- a/drivers/usb/host/uhci-hcd.c ++++ b/drivers/usb/host/uhci-hcd.c +@@ -788,7 +788,7 @@ static int uhci_rh_resume(struct usb_hcd + return rc; + } + +-static int uhci_pci_suspend(struct usb_hcd *hcd) ++static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) + { + struct uhci_hcd *uhci = hcd_to_uhci(hcd); + int rc = 0; +--- a/include/linux/usb/hcd.h ++++ b/include/linux/usb/hcd.h +@@ -211,7 +211,7 @@ struct hc_driver { + * a whole, not just the root hub; they're for PCI bus glue. + */ + /* called after suspending the hub, before entering D3 etc */ +- int (*pci_suspend)(struct usb_hcd *hcd); ++ int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup); + + /* called after entering D0 (etc), before resuming the hub */ + int (*pci_resume)(struct usb_hcd *hcd, bool hibernated); diff --git a/usb/usb-add-runtime-pm-for-pci-based-host-controllers.patch b/usb/usb-add-runtime-pm-for-pci-based-host-controllers.patch new file mode 100644 index 00000000000000..7f104336553808 --- /dev/null +++ b/usb/usb-add-runtime-pm-for-pci-based-host-controllers.patch @@ -0,0 +1,167 @@ +From stern@rowland.harvard.edu Wed Jul 7 14:57:08 2010 +From: Alan Stern <stern@rowland.harvard.edu> +Date: Fri, 25 Jun 2010 14:02:57 -0400 (EDT) +Subject: USB: add runtime PM for PCI-based host controllers +To: Greg KH <greg@kroah.com> +Message-ID: <Pine.LNX.4.44L0.1006251253080.1604-100000@iolanthe.rowland.org> + + +This patch (as1386) adds runtime-PM support for PCI-based USB host +controllers. By default autosuspend is disallowed; the user must +enable it by writing "auto" to the controller's power/control sysfs +attribute. + +Signed-off-by: Alan Stern <stern@rowland.harvard.edu> +Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> + + +--- + drivers/usb/core/hcd-pci.c | 76 ++++++++++++++++++++++++++++++++++++--------- + 1 file changed, 62 insertions(+), 14 deletions(-) + +--- a/drivers/usb/core/hcd-pci.c ++++ b/drivers/usb/core/hcd-pci.c +@@ -250,6 +250,9 @@ int usb_hcd_pci_probe(struct pci_dev *de + if (retval != 0) + goto err4; + set_hs_companion(dev, hcd); ++ ++ if (pci_dev_run_wake(dev)) ++ pm_runtime_put_noidle(&dev->dev); + return retval; + + err4: +@@ -292,6 +295,9 @@ void usb_hcd_pci_remove(struct pci_dev * + if (!hcd) + return; + ++ if (pci_dev_run_wake(dev)) ++ pm_runtime_get_noresume(&dev->dev); ++ + /* Fake an interrupt request in order to give the driver a chance + * to test whether the controller hardware has been removed (e.g., + * cardbus physical eject). +@@ -325,12 +331,13 @@ void usb_hcd_pci_shutdown(struct pci_dev + if (!hcd) + return; + +- if (hcd->driver->shutdown) ++ if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) && ++ hcd->driver->shutdown) + hcd->driver->shutdown(hcd); + } + EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown); + +-#ifdef CONFIG_PM_SLEEP ++#ifdef CONFIG_PM_OPS + + #ifdef CONFIG_PPC_PMAC + static void powermac_set_asic(struct pci_dev *pci_dev, int enable) +@@ -366,7 +373,7 @@ static int check_root_hub_suspended(stru + return 0; + } + +-static int hcd_pci_suspend(struct device *dev) ++static int suspend_common(struct device *dev, bool do_wakeup) + { + struct pci_dev *pci_dev = to_pci_dev(dev); + struct usb_hcd *hcd = pci_get_drvdata(pci_dev); +@@ -381,13 +388,7 @@ static int hcd_pci_suspend(struct device + if (retval) + return retval; + +- /* We might already be suspended (runtime PM -- not yet written) */ +- if (pci_dev->current_state != PCI_D0) +- return retval; +- + if (hcd->driver->pci_suspend) { +- bool do_wakeup = device_may_wakeup(dev); +- + /* Optimization: Don't suspend if a root-hub wakeup is + * pending and it would cause the HCD to wake up anyway. + */ +@@ -439,10 +440,8 @@ static int resume_common(struct device * + clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); + + if (hcd->driver->pci_resume) { +- /* This call should be made only during system resume, +- * not during runtime resume. +- */ +- wait_for_companions(pci_dev, hcd); ++ if (event != PM_EVENT_AUTO_RESUME) ++ wait_for_companions(pci_dev, hcd); + + retval = hcd->driver->pci_resume(hcd, + event == PM_EVENT_RESTORE); +@@ -454,6 +453,13 @@ static int resume_common(struct device * + return retval; + } + ++#ifdef CONFIG_PM_SLEEP ++ ++static int hcd_pci_suspend(struct device *dev) ++{ ++ return suspend_common(dev, device_may_wakeup(dev)); ++} ++ + static int hcd_pci_suspend_noirq(struct device *dev) + { + struct pci_dev *pci_dev = to_pci_dev(dev); +@@ -513,6 +519,46 @@ static int hcd_pci_restore(struct device + return resume_common(dev, PM_EVENT_RESTORE); + } + ++#else ++ ++#define hcd_pci_suspend NULL ++#define hcd_pci_suspend_noirq NULL ++#define hcd_pci_resume_noirq NULL ++#define hcd_pci_resume NULL ++#define hcd_pci_restore NULL ++ ++#endif /* CONFIG_PM_SLEEP */ ++ ++#ifdef CONFIG_PM_RUNTIME ++ ++static int hcd_pci_runtime_suspend(struct device *dev) ++{ ++ int retval; ++ ++ retval = suspend_common(dev, true); ++ if (retval == 0) ++ powermac_set_asic(to_pci_dev(dev), 0); ++ dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval); ++ return retval; ++} ++ ++static int hcd_pci_runtime_resume(struct device *dev) ++{ ++ int retval; ++ ++ powermac_set_asic(to_pci_dev(dev), 1); ++ retval = resume_common(dev, PM_EVENT_AUTO_RESUME); ++ dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval); ++ return retval; ++} ++ ++#else ++ ++#define hcd_pci_runtime_suspend NULL ++#define hcd_pci_runtime_resume NULL ++ ++#endif /* CONFIG_PM_RUNTIME */ ++ + const struct dev_pm_ops usb_hcd_pci_pm_ops = { + .suspend = hcd_pci_suspend, + .suspend_noirq = hcd_pci_suspend_noirq, +@@ -526,7 +572,9 @@ const struct dev_pm_ops usb_hcd_pci_pm_o + .poweroff_noirq = hcd_pci_suspend_noirq, + .restore_noirq = hcd_pci_resume_noirq, + .restore = hcd_pci_restore, ++ .runtime_suspend = hcd_pci_runtime_suspend, ++ .runtime_resume = hcd_pci_runtime_resume, + }; + EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops); + +-#endif /* CONFIG_PM_SLEEP */ ++#endif /* CONFIG_PM_OPS */ diff --git a/usb/usb-controller-resume-should-check-the-root-hub.patch b/usb/usb-controller-resume-should-check-the-root-hub.patch new file mode 100644 index 00000000000000..c0fc5896cf2aa1 --- /dev/null +++ b/usb/usb-controller-resume-should-check-the-root-hub.patch @@ -0,0 +1,95 @@ +From stern@rowland.harvard.edu Wed Jul 7 14:55:34 2010 +From: Alan Stern <stern@rowland.harvard.edu> +Date: Fri, 25 Jun 2010 14:02:24 -0400 (EDT) +Subject: USB: controller resume should check the root hub +To: Greg KH <greg@kroah.com> +Message-ID: <Pine.LNX.4.44L0.1006251244030.1604-100000@iolanthe.rowland.org> + + +This patch (as1394) adds code to ehci-hcd, ohci-hcd, and uhci-hcd for +automatically resuming the root hub when the controller is resumed, if +the root hub has a wakeup request pending on some port. + +During resume from system sleep this doesn't matter, because the root +hubs will naturally be resumed along with every other device in the +system. However it _will_ matter for runtime PM: If the controller is +suspended and a remote wakeup request is received then the controller +will autoresume, but we need to ensure that the root hub also +autoresumes. Otherwise the wakeup request would be ignored, the +controller would go back to sleep, and the cycle would repeat a large +number of times (I saw this happen before the patch was written). + +Signed-off-by: Alan Stern <stern@rowland.harvard.edu> +Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> + +--- + drivers/usb/host/ehci-hub.c | 4 ++++ + drivers/usb/host/ohci-hub.c | 7 ++++++- + drivers/usb/host/uhci-hcd.c | 7 ++++--- + drivers/usb/host/uhci-hub.c | 2 +- + 4 files changed, 15 insertions(+), 5 deletions(-) + +--- a/drivers/usb/host/ehci-hub.c ++++ b/drivers/usb/host/ehci-hub.c +@@ -166,6 +166,10 @@ static void ehci_adjust_port_wakeup_flag + ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg); + } + } ++ ++ /* Does the root hub have a port wakeup pending? */ ++ if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)) ++ usb_hcd_resume_root_hub(ehci_to_hcd(ehci)); + } + + static int ehci_bus_suspend (struct usb_hcd *hcd) +--- a/drivers/usb/host/ohci-hub.c ++++ b/drivers/usb/host/ohci-hub.c +@@ -355,6 +355,11 @@ static void ohci_finish_controller_resum + ohci_readl(ohci, &ohci->regs->intrenable); + msleep(20); + } ++ ++ /* Does the root hub have a port wakeup pending? */ ++ if (ohci_readl(ohci, &ohci->regs->intrstatus) & ++ (OHCI_INTR_RD | OHCI_INTR_RHSC)) ++ usb_hcd_resume_root_hub(hcd); + } + + /* Carry out polling-, autostop-, and autoresume-related state changes */ +@@ -364,7 +369,7 @@ static int ohci_root_hub_state_changes(s + int poll_rh = 1; + int rhsc_enable; + +- /* Some broken controllers never turn off RHCS in the interrupt ++ /* Some broken controllers never turn off RHSC in the interrupt + * status register. For their sake we won't re-enable RHSC + * interrupts if the interrupt bit is already active. + */ +--- a/drivers/usb/host/uhci-hcd.c ++++ b/drivers/usb/host/uhci-hcd.c +@@ -862,10 +862,11 @@ static int uhci_pci_resume(struct usb_hc + /* If interrupts don't work and remote wakeup is enabled then + * the suspended root hub needs to be polled. + */ +- if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) { ++ if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); +- usb_hcd_poll_rh_status(hcd); +- } ++ ++ /* Does the root hub have a port wakeup pending? */ ++ usb_hcd_poll_rh_status(hcd); + return 0; + } + #endif +--- a/drivers/usb/host/uhci-hub.c ++++ b/drivers/usb/host/uhci-hub.c +@@ -200,7 +200,7 @@ static int uhci_hub_status_data(struct u + case UHCI_RH_SUSPENDING: + case UHCI_RH_SUSPENDED: + /* if port change, ask to be resumed */ +- if (status) ++ if (status || uhci->resuming_ports) + usb_hcd_resume_root_hub(hcd); + break; + diff --git a/usb/usb-drivers-usb-makefile-conditionally-descend-to-early.patch b/usb/usb-drivers-usb-makefile-conditionally-descend-to-early.patch new file mode 100644 index 00000000000000..e8e4dbce09c34f --- /dev/null +++ b/usb/usb-drivers-usb-makefile-conditionally-descend-to-early.patch @@ -0,0 +1,29 @@ +From nikai@nikai.net Wed Jul 7 14:58:58 2010 +From: Nicolas Kaiser <nikai@nikai.net> +Date: Sun, 27 Jun 2010 17:27:51 +0200 +Subject: USB: drivers/usb/Makefile: conditionally descend to 'early' +To: Greg Kroah-Hartman <gregkh@suse.de> +Message-ID: <20100627172751.32deb6aa@absol.kitzblitz> + + +Don't descend to the EARLY_PRINTK_DBGP directory +unless it is actually used. + +Signed-off-by: Nicolas Kaiser <nikai@nikai.net> +Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> + +--- + drivers/usb/Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/usb/Makefile ++++ b/drivers/usb/Makefile +@@ -41,7 +41,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ + obj-$(CONFIG_USB_SERIAL) += serial/ + + obj-$(CONFIG_USB) += misc/ +-obj-y += early/ ++obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/ + + obj-$(CONFIG_USB_ATM) += atm/ + obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ diff --git a/usb/usb-ehci-fix-null-pointer-dererence-in-hcds-that-use-hcd_local_mem.patch b/usb/usb-ehci-fix-null-pointer-dererence-in-hcds-that-use-hcd_local_mem.patch new file mode 100644 index 00000000000000..6687380a6429f9 --- /dev/null +++ b/usb/usb-ehci-fix-null-pointer-dererence-in-hcds-that-use-hcd_local_mem.patch @@ -0,0 +1,56 @@ +From arighi@develer.com Wed Jul 7 15:00:21 2010 +From: Andrea Righi <arighi@develer.com> +Date: Mon, 28 Jun 2010 16:56:45 +0200 +Subject: USB: EHCI: fix NULL pointer dererence in HCDs that use HCD_LOCAL_MEM +To: Greg KH <greg@kroah.com> +Cc: Alan Stern <stern@rowland.harvard.edu>, Chris Wright <chrisw@sous-sol.org> +Message-ID: <20100628145636.GA6915@linux.develer.com> + + +If we use the HCD_LOCAL_MEM flag and dma_declare_coherent_memory() to +enforce the host controller's local memory utilization we also need to +disable native scatter-gather support, otherwise hcd_alloc_coherent() in +map_urb_for_dma() is called with urb->transfer_buffer == NULL, that +triggers a NULL pointer dereference. + +We can also consider to add a WARN_ON() and return an error code to +better catch this problem in the future. + +At the moment no driver seems to hit this bug, so I should +consider this a low-priority fix. + +Signed-off-by: Andrea Righi <arighi@develer.com> +Acked-by: Alan Stern <stern@rowland.harvard.edu> +Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> + +--- + drivers/usb/core/hcd.c | 5 +++++ + drivers/usb/host/ehci-hcd.c | 3 ++- + 2 files changed, 7 insertions(+), 1 deletion(-) + +--- a/drivers/usb/core/hcd.c ++++ b/drivers/usb/core/hcd.c +@@ -1218,6 +1218,11 @@ static int hcd_alloc_coherent(struct usb + { + unsigned char *vaddr; + ++ if (*vaddr_handle == NULL) { ++ WARN_ON_ONCE(1); ++ return -EFAULT; ++ } ++ + vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr), + mem_flags, dma_handle); + if (!vaddr) +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -629,7 +629,8 @@ static int ehci_init(struct usb_hcd *hcd + ehci->command = temp; + + /* Accept arbitrarily long scatter-gather lists */ +- hcd->self.sg_tablesize = ~0; ++ if (!(hcd->driver->flags & HCD_LOCAL_MEM)) ++ hcd->self.sg_tablesize = ~0; + return 0; + } + diff --git a/usb/usb-fix-race-between-root-hub-wakeup-controller-suspend.patch b/usb/usb-fix-race-between-root-hub-wakeup-controller-suspend.patch new file mode 100644 index 00000000000000..b51d05c1839473 --- /dev/null +++ b/usb/usb-fix-race-between-root-hub-wakeup-controller-suspend.patch @@ -0,0 +1,98 @@ +From stern@rowland.harvard.edu Wed Jul 7 14:55:46 2010 +From: Alan Stern <stern@rowland.harvard.edu> +Date: Fri, 25 Jun 2010 14:02:35 -0400 (EDT) +Subject: USB: fix race between root-hub wakeup & controller suspend +To: Greg KH <greg@kroah.com> +Message-ID: <Pine.LNX.4.44L0.1006251248220.1604-100000@iolanthe.rowland.org> + + +This patch (as1395) adds code to hcd_pci_suspend() for handling wakeup +races. This is another general race pattern, similar to the "open +vs. unregister" race we're all familiar with. Here, the race is +between suspending a device and receiving a wakeup request from one of +the device's suspended children. + +In particular, if a root-hub wakeup is requested at about the same +time as the corresponding USB controller is suspended, and if the +controller is enabled for wakeup, then the controller should either +fail to suspend or else wake right back up again. + +During system sleep this won't happen very much, especially since host +controllers generally aren't enabled for wakeup during sleep. However +it is definitely an issue for runtime PM. Something like this will be +needed to prevent the controller from autosuspending while waiting for +a root-hub resume to take place. (That is, in fact, the common case, +for which there is an extra test.) + +Signed-off-by: Alan Stern <stern@rowland.harvard.edu> +Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> + +--- + drivers/usb/core/hcd-pci.c | 12 ++++++++++++ + drivers/usb/core/hcd.c | 5 ++++- + include/linux/usb/hcd.h | 2 ++ + 3 files changed, 18 insertions(+), 1 deletion(-) + +--- a/drivers/usb/core/hcd-pci.c ++++ b/drivers/usb/core/hcd-pci.c +@@ -388,8 +388,20 @@ static int hcd_pci_suspend(struct device + if (hcd->driver->pci_suspend) { + bool do_wakeup = device_may_wakeup(dev); + ++ /* Optimization: Don't suspend if a root-hub wakeup is ++ * pending and it would cause the HCD to wake up anyway. ++ */ ++ if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) ++ return -EBUSY; + retval = hcd->driver->pci_suspend(hcd, do_wakeup); + suspend_report_result(hcd->driver->pci_suspend, retval); ++ ++ /* Check again in case wakeup raced with pci_suspend */ ++ if (retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) { ++ if (hcd->driver->pci_resume) ++ hcd->driver->pci_resume(hcd, false); ++ retval = -EBUSY; ++ } + if (retval) + return retval; + } +--- a/drivers/usb/core/hcd.c ++++ b/drivers/usb/core/hcd.c +@@ -1940,6 +1940,7 @@ int hcd_bus_resume(struct usb_device *rh + + dev_dbg(&rhdev->dev, "usb %s%s\n", + (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume"); ++ clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); + if (!hcd->driver->bus_resume) + return -ENOENT; + if (hcd->state == HC_STATE_RUNNING) +@@ -1993,8 +1994,10 @@ void usb_hcd_resume_root_hub (struct usb + unsigned long flags; + + spin_lock_irqsave (&hcd_root_hub_lock, flags); +- if (hcd->rh_registered) ++ if (hcd->rh_registered) { ++ set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); + queue_work(pm_wq, &hcd->wakeup_work); ++ } + spin_unlock_irqrestore (&hcd_root_hub_lock, flags); + } + EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); +--- a/include/linux/usb/hcd.h ++++ b/include/linux/usb/hcd.h +@@ -98,6 +98,7 @@ struct usb_hcd { + #define HCD_FLAG_SAW_IRQ 1 + #define HCD_FLAG_POLL_RH 2 /* poll for rh status? */ + #define HCD_FLAG_POLL_PENDING 3 /* status has changed? */ ++#define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */ + + /* The flags can be tested using these macros; they are likely to + * be slightly faster than test_bit(). +@@ -106,6 +107,7 @@ struct usb_hcd { + #define HCD_SAW_IRQ(hcd) ((hcd)->flags & (1U << HCD_FLAG_SAW_IRQ)) + #define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH)) + #define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING)) ++#define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING)) + + /* Flags that get set only during HCD registration or removal. */ + unsigned rh_registered:1;/* is root hub registered? */ diff --git a/usb/usb-move-pci-hcd-resume-routine.patch b/usb/usb-move-pci-hcd-resume-routine.patch new file mode 100644 index 00000000000000..144b105d219642 --- /dev/null +++ b/usb/usb-move-pci-hcd-resume-routine.patch @@ -0,0 +1,120 @@ +From stern@rowland.harvard.edu Wed Jul 7 14:55:11 2010 +From: Alan Stern <stern@rowland.harvard.edu> +Date: Fri, 25 Jun 2010 14:02:03 -0400 (EDT) +Subject: USB: move PCI HCD resume routine +To: Greg KH <greg@kroah.com> +Message-ID: <Pine.LNX.4.44L0.1006251239250.1604-100000@iolanthe.rowland.org> + + +This patch (as1384) moves the resume_common() routine in hcd-pci.c a +little higher in the source file to avoid forward references in an +upcoming patch. It also replaces the "hibernated" argument with a +more general "event" argument, which will be useful when the routine +is called during a runtime resume. + +Signed-off-by: Alan Stern <stern@rowland.harvard.edu> +Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> + +--- + drivers/usb/core/hcd-pci.c | 77 ++++++++++++++++++++++----------------------- + 1 file changed, 39 insertions(+), 38 deletions(-) + +--- a/drivers/usb/core/hcd-pci.c ++++ b/drivers/usb/core/hcd-pci.c +@@ -403,6 +403,43 @@ static int hcd_pci_suspend(struct device + return retval; + } + ++static int resume_common(struct device *dev, int event) ++{ ++ struct pci_dev *pci_dev = to_pci_dev(dev); ++ struct usb_hcd *hcd = pci_get_drvdata(pci_dev); ++ int retval; ++ ++ if (hcd->state != HC_STATE_SUSPENDED) { ++ dev_dbg(dev, "can't resume, not suspended!\n"); ++ return 0; ++ } ++ ++ retval = pci_enable_device(pci_dev); ++ if (retval < 0) { ++ dev_err(dev, "can't re-enable after resume, %d!\n", retval); ++ return retval; ++ } ++ ++ pci_set_master(pci_dev); ++ ++ clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); ++ ++ if (hcd->driver->pci_resume) { ++ /* This call should be made only during system resume, ++ * not during runtime resume. ++ */ ++ wait_for_companions(pci_dev, hcd); ++ ++ retval = hcd->driver->pci_resume(hcd, ++ event == PM_EVENT_RESTORE); ++ if (retval) { ++ dev_err(dev, "PCI post-resume error %d!\n", retval); ++ usb_hc_died(hcd); ++ } ++ } ++ return retval; ++} ++ + static int hcd_pci_suspend_noirq(struct device *dev) + { + struct pci_dev *pci_dev = to_pci_dev(dev); +@@ -452,50 +489,14 @@ static int hcd_pci_resume_noirq(struct d + return 0; + } + +-static int resume_common(struct device *dev, bool hibernated) +-{ +- struct pci_dev *pci_dev = to_pci_dev(dev); +- struct usb_hcd *hcd = pci_get_drvdata(pci_dev); +- int retval; +- +- if (hcd->state != HC_STATE_SUSPENDED) { +- dev_dbg(dev, "can't resume, not suspended!\n"); +- return 0; +- } +- +- retval = pci_enable_device(pci_dev); +- if (retval < 0) { +- dev_err(dev, "can't re-enable after resume, %d!\n", retval); +- return retval; +- } +- +- pci_set_master(pci_dev); +- +- clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); +- +- if (hcd->driver->pci_resume) { +- /* This call should be made only during system resume, +- * not during runtime resume. +- */ +- wait_for_companions(pci_dev, hcd); +- +- retval = hcd->driver->pci_resume(hcd, hibernated); +- if (retval) { +- dev_err(dev, "PCI post-resume error %d!\n", retval); +- usb_hc_died(hcd); +- } +- } +- return retval; +-} +- + static int hcd_pci_resume(struct device *dev) + { +- return resume_common(dev, false); ++ return resume_common(dev, PM_EVENT_RESUME); + } + + static int hcd_pci_restore(struct device *dev) + { +- return resume_common(dev, true); ++ return resume_common(dev, PM_EVENT_RESTORE); + } + + const struct dev_pm_ops usb_hcd_pci_pm_ops = { diff --git a/usb/usb-musb-tusb6010-fix-compile-error-with-n8x0_defconfig.patch b/usb/usb-musb-tusb6010-fix-compile-error-with-n8x0_defconfig.patch new file mode 100644 index 00000000000000..3e790aaa22c323 --- /dev/null +++ b/usb/usb-musb-tusb6010-fix-compile-error-with-n8x0_defconfig.patch @@ -0,0 +1,44 @@ +From felipe.balbi@nokia.com Wed Jul 7 15:01:53 2010 +From: felipe.balbi@nokia.com +Date: Mon, 5 Jul 2010 12:12:01 +0300 +Subject: USB: musb: tusb6010: fix compile error with n8x0_defconfig +To: Greg KH <greg@kroah.com> +Cc: Tony Lindgren <tony@atomide.com>, Felipe Balbi <felipe.balbi@nokia.com> +Message-ID: <1278321121-13474-1-git-send-email-felipe.balbi@nokia.com> + + +From: Felipe Balbi <felipe.balbi@nokia.com> + +Drop the unnecessary empty stubs in tusb6010.c and avoid +a compile error when building kernel for n8x0. + +Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> +Cc: stable <stable@kernel.org> +Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> + +--- + drivers/usb/musb/tusb6010.c | 13 ------------- + 1 file changed, 13 deletions(-) + +--- a/drivers/usb/musb/tusb6010.c ++++ b/drivers/usb/musb/tusb6010.c +@@ -29,19 +29,6 @@ static void tusb_source_power(struct mus + #define TUSB_REV_MAJOR(reg_val) ((reg_val >> 4) & 0xf) + #define TUSB_REV_MINOR(reg_val) (reg_val & 0xf) + +-#ifdef CONFIG_PM +-/* REVISIT: These should be only needed if somebody implements off idle */ +-void musb_platform_save_context(struct musb *musb, +- struct musb_context_registers *musb_context) +-{ +-} +- +-void musb_platform_restore_context(struct musb *musb, +- struct musb_context_registers *musb_context) +-{ +-} +-#endif +- + /* + * Checks the revision. We need to use the DMA register as 3.0 does not + * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV. diff --git a/usb/usb-refactor-the-powermac-specific-asic-clock-code.patch b/usb/usb-refactor-the-powermac-specific-asic-clock-code.patch new file mode 100644 index 00000000000000..baaffc61d1b1d6 --- /dev/null +++ b/usb/usb-refactor-the-powermac-specific-asic-clock-code.patch @@ -0,0 +1,87 @@ +From stern@rowland.harvard.edu Wed Jul 7 14:54:53 2010 +From: Alan Stern <stern@rowland.harvard.edu> +Date: Fri, 25 Jun 2010 14:01:49 -0400 (EDT) +Subject: USB: refactor the powermac-specific ASIC clock code +To: Greg KH <greg@kroah.com> +Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> +Message-ID: <Pine.LNX.4.44L0.1006251235540.1604-100000@iolanthe.rowland.org> + + +This patch (as1383) takes the powermac-specific code from the PCI HCD +glue layer and encapsulates it in its own subroutine. + +Signed-off-by: Alan Stern <stern@rowland.harvard.edu> +Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> +Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> + +--- + drivers/usb/core/hcd-pci.c | 44 +++++++++++++++++++++++--------------------- + 1 file changed, 23 insertions(+), 21 deletions(-) + +--- a/drivers/usb/core/hcd-pci.c ++++ b/drivers/usb/core/hcd-pci.c +@@ -332,6 +332,27 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown); + + #ifdef CONFIG_PM_SLEEP + ++#ifdef CONFIG_PPC_PMAC ++static void powermac_set_asic(struct pci_dev *pci_dev, int enable) ++{ ++ /* Enanble or disable ASIC clocks for USB */ ++ if (machine_is(powermac)) { ++ struct device_node *of_node; ++ ++ of_node = pci_device_to_OF_node(pci_dev); ++ if (of_node) ++ pmac_call_feature(PMAC_FTR_USB_ENABLE, ++ of_node, 0, enable); ++ } ++} ++ ++#else ++ ++static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable) ++{} ++ ++#endif /* CONFIG_PPC_PMAC */ ++ + static int check_root_hub_suspended(struct device *dev) + { + struct pci_dev *pci_dev = to_pci_dev(dev); +@@ -416,16 +437,7 @@ static int hcd_pci_suspend_noirq(struct + return retval; + } + +-#ifdef CONFIG_PPC_PMAC +- /* Disable ASIC clocks for USB */ +- if (machine_is(powermac)) { +- struct device_node *of_node; +- +- of_node = pci_device_to_OF_node(pci_dev); +- if (of_node) +- pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0); +- } +-#endif ++ powermac_set_asic(pci_dev, 0); + return retval; + } + +@@ -433,17 +445,7 @@ static int hcd_pci_resume_noirq(struct d + { + struct pci_dev *pci_dev = to_pci_dev(dev); + +-#ifdef CONFIG_PPC_PMAC +- /* Reenable ASIC clocks for USB */ +- if (machine_is(powermac)) { +- struct device_node *of_node; +- +- of_node = pci_device_to_OF_node(pci_dev); +- if (of_node) +- pmac_call_feature(PMAC_FTR_USB_ENABLE, +- of_node, 0, 1); +- } +-#endif ++ powermac_set_asic(pci_dev, 1); + + /* Go back to D0 and disable remote wakeup */ + pci_back_from_sleep(pci_dev); diff --git a/usb/usb-uhci-add-support-for-intel-s-wakeup-flags.patch b/usb/usb-uhci-add-support-for-intel-s-wakeup-flags.patch new file mode 100644 index 00000000000000..0b00af20eb99ac --- /dev/null +++ b/usb/usb-uhci-add-support-for-intel-s-wakeup-flags.patch @@ -0,0 +1,128 @@ +From stern@rowland.harvard.edu Wed Jul 7 14:55:57 2010 +From: Alan Stern <stern@rowland.harvard.edu> +Date: Fri, 25 Jun 2010 14:02:49 -0400 (EDT) +Subject: USB: UHCI: add support for Intel's wakeup flags +To: Greg KH <greg@kroah.com> +Message-ID: <Pine.LNX.4.44L0.1006251251090.1604-100000@iolanthe.rowland.org> + + +This patch (as1396) adds code to uhci-hcd to support the +vendor-specific wakeup settings found in Intel's ICHx hardware. A +couple of unnecessary memory barriers are removed. And the root hub +isn't put back into the "suspended" state if power was lost during a +system sleep -- there's not much point in doing so because the root hub +will be resumed shortly. + +Signed-off-by: Alan Stern <stern@rowland.harvard.edu> +Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> + +--- + drivers/usb/host/uhci-hcd.c | 30 +++++++++++++++++------------- + drivers/usb/host/uhci-hcd.h | 7 ++++++- + 2 files changed, 23 insertions(+), 14 deletions(-) + +--- a/drivers/usb/host/uhci-hcd.c ++++ b/drivers/usb/host/uhci-hcd.c +@@ -176,6 +176,8 @@ static void check_and_reset_hc(struct uh + */ + static void configure_hc(struct uhci_hcd *uhci) + { ++ struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci)); ++ + /* Set the frame length to the default: 1 ms exactly */ + outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF); + +@@ -191,8 +193,11 @@ static void configure_hc(struct uhci_hcd + mb(); + + /* Enable PIRQ */ +- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, +- USBLEGSUP_DEFAULT); ++ pci_write_config_word(pdev, USBLEGSUP, USBLEGSUP_DEFAULT); ++ ++ /* Disable platform-specific non-PME# wakeup */ ++ if (pdev->vendor == PCI_VENDOR_ID_INTEL) ++ pci_write_config_byte(pdev, USBRES_INTEL, 0); + } + + +@@ -791,6 +796,7 @@ static int uhci_rh_resume(struct usb_hcd + static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) + { + struct uhci_hcd *uhci = hcd_to_uhci(hcd); ++ struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci)); + int rc = 0; + + dev_dbg(uhci_dev(uhci), "%s\n", __func__); +@@ -808,11 +814,15 @@ static int uhci_pci_suspend(struct usb_h + /* All PCI host controllers are required to disable IRQ generation + * at the source, so we must turn off PIRQ. + */ +- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0); +- mb(); ++ pci_write_config_word(pdev, USBLEGSUP, 0); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + +- /* FIXME: Enable non-PME# remote wakeup? */ ++ /* Enable platform-specific non-PME# wakeup */ ++ if (do_wakeup) { ++ if (pdev->vendor == PCI_VENDOR_ID_INTEL) ++ pci_write_config_byte(pdev, USBRES_INTEL, ++ USBPORT1EN | USBPORT2EN); ++ } + + done_okay: + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); +@@ -831,7 +841,6 @@ static int uhci_pci_resume(struct usb_hc + * even if the controller was dead. + */ + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); +- mb(); + + spin_lock_irq(&uhci->lock); + +@@ -839,8 +848,6 @@ static int uhci_pci_resume(struct usb_hc + if (hibernated) + uhci_hc_died(uhci); + +- /* FIXME: Disable non-PME# remote wakeup? */ +- + /* The firmware or a boot kernel may have changed the controller + * settings during a system wakeup. Check it and reconfigure + * to avoid problems. +@@ -850,12 +857,9 @@ static int uhci_pci_resume(struct usb_hc + /* If the controller was dead before, it's back alive now */ + configure_hc(uhci); + +- if (uhci->rh_state == UHCI_RH_RESET) { +- +- /* The controller had to be reset */ ++ /* Tell the core if the controller had to be reset */ ++ if (uhci->rh_state == UHCI_RH_RESET) + usb_root_hub_lost_power(hcd->self.root_hub); +- suspend_rh(uhci, UHCI_RH_SUSPENDED); +- } + + spin_unlock_irq(&uhci->lock); + +--- a/drivers/usb/host/uhci-hcd.h ++++ b/drivers/usb/host/uhci-hcd.h +@@ -67,12 +67,17 @@ + #define USBPORTSC_RES3 0x4000 /* reserved, write zeroes */ + #define USBPORTSC_RES4 0x8000 /* reserved, write zeroes */ + +-/* Legacy support register */ ++/* PCI legacy support register */ + #define USBLEGSUP 0xc0 + #define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ + #define USBLEGSUP_RWC 0x8f00 /* the R/WC bits */ + #define USBLEGSUP_RO 0x5040 /* R/O and reserved bits */ + ++/* PCI Intel-specific resume-enable register */ ++#define USBRES_INTEL 0xc4 ++#define USBPORT1EN 0x01 ++#define USBPORT2EN 0x02 ++ + #define UHCI_PTR_BITS cpu_to_le32(0x000F) + #define UHCI_PTR_TERM cpu_to_le32(0x0001) + #define UHCI_PTR_QH cpu_to_le32(0x0002) diff --git a/usb/usb-usblp-fixed-switch-brace-whitespace-and-spacing-coding-style-issues.patch b/usb/usb-usblp-fixed-switch-brace-whitespace-and-spacing-coding-style-issues.patch new file mode 100644 index 00000000000000..8e37c147a39a01 --- /dev/null +++ b/usb/usb-usblp-fixed-switch-brace-whitespace-and-spacing-coding-style-issues.patch @@ -0,0 +1,616 @@ +From nikai@nikai.net Wed Jul 7 14:57:26 2010 +From: Nicolas Kaiser <nikai@nikai.net> +Date: Fri, 25 Jun 2010 20:25:37 +0200 +Subject: USB: usblp: fixed switch, brace, whitespace and spacing coding style issues +To: Pete Zaitcev <zaitcev@redhat.com> +Cc: Greg Kroah-Hartman <gregkh@suse.de>, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org +Message-ID: <20100625202537.1cd4526c@absol.kitzblitz> + + +Fixed switch, brace, whitespace and spacing coding style issues. + +Signed-off-by: Nicolas Kaiser <nikai@nikai.net> +Cc: Pete Zaitcev <zaitcev@redhat.com> +Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> + +--- + drivers/usb/class/usblp.c | 369 ++++++++++++++++++++++------------------------ + 1 file changed, 184 insertions(+), 185 deletions(-) + +--- a/drivers/usb/class/usblp.c ++++ b/drivers/usb/class/usblp.c +@@ -135,7 +135,7 @@ MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD + * ->lock locks what interrupt accesses. + */ + struct usblp { +- struct usb_device *dev; /* USB device */ ++ struct usb_device *dev; /* USB device */ + struct mutex wmut; + struct mutex mut; + spinlock_t lock; /* locks rcomplete, wcomplete */ +@@ -169,7 +169,8 @@ struct usblp { + }; + + #ifdef DEBUG +-static void usblp_dump(struct usblp *usblp) { ++static void usblp_dump(struct usblp *usblp) ++{ + int p; + + dbg("usblp=0x%p", usblp); +@@ -216,8 +217,8 @@ static const struct quirk_printer_struct + { 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */ + { 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */ + { 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */ +- { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */ +- { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */ ++ { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */ ++ { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */ + { 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */ + { 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */ + { 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */ +@@ -254,9 +255,8 @@ static int usblp_ctrl_msg(struct usblp * + /* High byte has the interface index. + Low byte has the alternate setting. + */ +- if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS)) { +- index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting; +- } ++ if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS)) ++ index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting; + + retval = usb_control_msg(usblp->dev, + dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0), +@@ -372,7 +372,7 @@ static int usblp_check_status(struct usb + return newerr; + } + +-static int handle_bidir (struct usblp *usblp) ++static int handle_bidir(struct usblp *usblp) + { + if (usblp->bidir && usblp->used) { + if (usblp_submit_read(usblp) < 0) +@@ -395,14 +395,13 @@ static int usblp_open(struct inode *inod + if (minor < 0) + return -ENODEV; + +- mutex_lock (&usblp_mutex); ++ mutex_lock(&usblp_mutex); + + retval = -ENODEV; + intf = usb_find_interface(&usblp_driver, minor); +- if (!intf) { ++ if (!intf) + goto out; +- } +- usblp = usb_get_intfdata (intf); ++ usblp = usb_get_intfdata(intf); + if (!usblp || !usblp->dev || !usblp->present) + goto out; + +@@ -433,18 +432,18 @@ static int usblp_open(struct inode *inod + retval = -EIO; + } + out: +- mutex_unlock (&usblp_mutex); ++ mutex_unlock(&usblp_mutex); + return retval; + } + +-static void usblp_cleanup (struct usblp *usblp) ++static void usblp_cleanup(struct usblp *usblp) + { + printk(KERN_INFO "usblp%d: removed\n", usblp->minor); + + kfree(usblp->readbuf); +- kfree (usblp->device_id_string); +- kfree (usblp->statusbuf); +- kfree (usblp); ++ kfree(usblp->device_id_string); ++ kfree(usblp->statusbuf); ++ kfree(usblp); + } + + static void usblp_unlink_urbs(struct usblp *usblp) +@@ -458,14 +457,14 @@ static int usblp_release(struct inode *i + + usblp->flags &= ~LP_ABORT; + +- mutex_lock (&usblp_mutex); ++ mutex_lock(&usblp_mutex); + usblp->used = 0; + if (usblp->present) { + usblp_unlink_urbs(usblp); + usb_autopm_put_interface(usblp->intf); +- } else /* finish cleanup from disconnect */ +- usblp_cleanup (usblp); +- mutex_unlock (&usblp_mutex); ++ } else /* finish cleanup from disconnect */ ++ usblp_cleanup(usblp); ++ mutex_unlock(&usblp_mutex); + return 0; + } + +@@ -495,190 +494,190 @@ static long usblp_ioctl(struct file *fil + int twoints[2]; + int retval = 0; + +- mutex_lock (&usblp->mut); ++ mutex_lock(&usblp->mut); + if (!usblp->present) { + retval = -ENODEV; + goto done; + } + + dbg("usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)", cmd, _IOC_TYPE(cmd), +- _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd) ); ++ _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd)); + + if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */ + + switch (_IOC_NR(cmd)) { + +- case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */ +- if (_IOC_DIR(cmd) != _IOC_READ) { +- retval = -EINVAL; +- goto done; +- } ++ case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */ ++ if (_IOC_DIR(cmd) != _IOC_READ) { ++ retval = -EINVAL; ++ goto done; ++ } + +- length = usblp_cache_device_id_string(usblp); +- if (length < 0) { +- retval = length; +- goto done; +- } +- if (length > _IOC_SIZE(cmd)) +- length = _IOC_SIZE(cmd); /* truncate */ ++ length = usblp_cache_device_id_string(usblp); ++ if (length < 0) { ++ retval = length; ++ goto done; ++ } ++ if (length > _IOC_SIZE(cmd)) ++ length = _IOC_SIZE(cmd); /* truncate */ + +- if (copy_to_user((void __user *) arg, +- usblp->device_id_string, +- (unsigned long) length)) { +- retval = -EFAULT; +- goto done; +- } ++ if (copy_to_user((void __user *) arg, ++ usblp->device_id_string, ++ (unsigned long) length)) { ++ retval = -EFAULT; ++ goto done; ++ } + +- break; ++ break; + +- case IOCNR_GET_PROTOCOLS: +- if (_IOC_DIR(cmd) != _IOC_READ || +- _IOC_SIZE(cmd) < sizeof(twoints)) { +- retval = -EINVAL; +- goto done; +- } ++ case IOCNR_GET_PROTOCOLS: ++ if (_IOC_DIR(cmd) != _IOC_READ || ++ _IOC_SIZE(cmd) < sizeof(twoints)) { ++ retval = -EINVAL; ++ goto done; ++ } + +- twoints[0] = usblp->current_protocol; +- twoints[1] = 0; +- for (i = USBLP_FIRST_PROTOCOL; +- i <= USBLP_LAST_PROTOCOL; i++) { +- if (usblp->protocol[i].alt_setting >= 0) +- twoints[1] |= (1<<i); +- } ++ twoints[0] = usblp->current_protocol; ++ twoints[1] = 0; ++ for (i = USBLP_FIRST_PROTOCOL; ++ i <= USBLP_LAST_PROTOCOL; i++) { ++ if (usblp->protocol[i].alt_setting >= 0) ++ twoints[1] |= (1<<i); ++ } + +- if (copy_to_user((void __user *)arg, +- (unsigned char *)twoints, +- sizeof(twoints))) { +- retval = -EFAULT; +- goto done; +- } ++ if (copy_to_user((void __user *)arg, ++ (unsigned char *)twoints, ++ sizeof(twoints))) { ++ retval = -EFAULT; ++ goto done; ++ } + +- break; ++ break; + +- case IOCNR_SET_PROTOCOL: +- if (_IOC_DIR(cmd) != _IOC_WRITE) { +- retval = -EINVAL; +- goto done; +- } ++ case IOCNR_SET_PROTOCOL: ++ if (_IOC_DIR(cmd) != _IOC_WRITE) { ++ retval = -EINVAL; ++ goto done; ++ } + + #ifdef DEBUG +- if (arg == -10) { +- usblp_dump(usblp); +- break; +- } ++ if (arg == -10) { ++ usblp_dump(usblp); ++ break; ++ } + #endif + +- usblp_unlink_urbs(usblp); +- retval = usblp_set_protocol(usblp, arg); +- if (retval < 0) { +- usblp_set_protocol(usblp, +- usblp->current_protocol); +- } +- break; ++ usblp_unlink_urbs(usblp); ++ retval = usblp_set_protocol(usblp, arg); ++ if (retval < 0) { ++ usblp_set_protocol(usblp, ++ usblp->current_protocol); ++ } ++ break; + +- case IOCNR_HP_SET_CHANNEL: +- if (_IOC_DIR(cmd) != _IOC_WRITE || +- le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 || +- usblp->quirks & USBLP_QUIRK_BIDIR) { +- retval = -EINVAL; +- goto done; +- } ++ case IOCNR_HP_SET_CHANNEL: ++ if (_IOC_DIR(cmd) != _IOC_WRITE || ++ le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 || ++ usblp->quirks & USBLP_QUIRK_BIDIR) { ++ retval = -EINVAL; ++ goto done; ++ } + +- err = usblp_hp_channel_change_request(usblp, +- arg, &newChannel); +- if (err < 0) { +- dev_err(&usblp->dev->dev, +- "usblp%d: error = %d setting " +- "HP channel\n", +- usblp->minor, err); +- retval = -EIO; +- goto done; +- } ++ err = usblp_hp_channel_change_request(usblp, ++ arg, &newChannel); ++ if (err < 0) { ++ dev_err(&usblp->dev->dev, ++ "usblp%d: error = %d setting " ++ "HP channel\n", ++ usblp->minor, err); ++ retval = -EIO; ++ goto done; ++ } + +- dbg("usblp%d requested/got HP channel %ld/%d", +- usblp->minor, arg, newChannel); +- break; ++ dbg("usblp%d requested/got HP channel %ld/%d", ++ usblp->minor, arg, newChannel); ++ break; + +- case IOCNR_GET_BUS_ADDRESS: +- if (_IOC_DIR(cmd) != _IOC_READ || +- _IOC_SIZE(cmd) < sizeof(twoints)) { +- retval = -EINVAL; +- goto done; +- } ++ case IOCNR_GET_BUS_ADDRESS: ++ if (_IOC_DIR(cmd) != _IOC_READ || ++ _IOC_SIZE(cmd) < sizeof(twoints)) { ++ retval = -EINVAL; ++ goto done; ++ } + +- twoints[0] = usblp->dev->bus->busnum; +- twoints[1] = usblp->dev->devnum; +- if (copy_to_user((void __user *)arg, +- (unsigned char *)twoints, +- sizeof(twoints))) { +- retval = -EFAULT; +- goto done; +- } ++ twoints[0] = usblp->dev->bus->busnum; ++ twoints[1] = usblp->dev->devnum; ++ if (copy_to_user((void __user *)arg, ++ (unsigned char *)twoints, ++ sizeof(twoints))) { ++ retval = -EFAULT; ++ goto done; ++ } + +- dbg("usblp%d is bus=%d, device=%d", +- usblp->minor, twoints[0], twoints[1]); +- break; ++ dbg("usblp%d is bus=%d, device=%d", ++ usblp->minor, twoints[0], twoints[1]); ++ break; + +- case IOCNR_GET_VID_PID: +- if (_IOC_DIR(cmd) != _IOC_READ || +- _IOC_SIZE(cmd) < sizeof(twoints)) { +- retval = -EINVAL; +- goto done; +- } ++ case IOCNR_GET_VID_PID: ++ if (_IOC_DIR(cmd) != _IOC_READ || ++ _IOC_SIZE(cmd) < sizeof(twoints)) { ++ retval = -EINVAL; ++ goto done; ++ } + +- twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor); +- twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct); +- if (copy_to_user((void __user *)arg, +- (unsigned char *)twoints, +- sizeof(twoints))) { +- retval = -EFAULT; +- goto done; +- } ++ twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor); ++ twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct); ++ if (copy_to_user((void __user *)arg, ++ (unsigned char *)twoints, ++ sizeof(twoints))) { ++ retval = -EFAULT; ++ goto done; ++ } + +- dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X", +- usblp->minor, twoints[0], twoints[1]); +- break; ++ dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X", ++ usblp->minor, twoints[0], twoints[1]); ++ break; + +- case IOCNR_SOFT_RESET: +- if (_IOC_DIR(cmd) != _IOC_NONE) { +- retval = -EINVAL; +- goto done; +- } +- retval = usblp_reset(usblp); +- break; +- default: +- retval = -ENOTTY; ++ case IOCNR_SOFT_RESET: ++ if (_IOC_DIR(cmd) != _IOC_NONE) { ++ retval = -EINVAL; ++ goto done; ++ } ++ retval = usblp_reset(usblp); ++ break; ++ default: ++ retval = -ENOTTY; + } + else /* old-style ioctl value */ + switch (cmd) { + +- case LPGETSTATUS: +- if ((retval = usblp_read_status(usblp, usblp->statusbuf))) { +- if (printk_ratelimit()) +- printk(KERN_ERR "usblp%d:" +- "failed reading printer status (%d)\n", +- usblp->minor, retval); +- retval = -EIO; +- goto done; +- } +- status = *usblp->statusbuf; +- if (copy_to_user ((void __user *)arg, &status, sizeof(int))) +- retval = -EFAULT; +- break; ++ case LPGETSTATUS: ++ if ((retval = usblp_read_status(usblp, usblp->statusbuf))) { ++ if (printk_ratelimit()) ++ printk(KERN_ERR "usblp%d:" ++ "failed reading printer status (%d)\n", ++ usblp->minor, retval); ++ retval = -EIO; ++ goto done; ++ } ++ status = *usblp->statusbuf; ++ if (copy_to_user((void __user *)arg, &status, sizeof(int))) ++ retval = -EFAULT; ++ break; + +- case LPABORT: +- if (arg) +- usblp->flags |= LP_ABORT; +- else +- usblp->flags &= ~LP_ABORT; +- break; ++ case LPABORT: ++ if (arg) ++ usblp->flags |= LP_ABORT; ++ else ++ usblp->flags &= ~LP_ABORT; ++ break; + +- default: +- retval = -ENOTTY; ++ default: ++ retval = -ENOTTY; + } + + done: +- mutex_unlock (&usblp->mut); ++ mutex_unlock(&usblp->mut); + return retval; + } + +@@ -840,7 +839,7 @@ static ssize_t usblp_read(struct file *f + } + + done: +- mutex_unlock (&usblp->mut); ++ mutex_unlock(&usblp->mut); + return count; + } + +@@ -1023,7 +1022,7 @@ raise_urb: + * while you are sending print data, and you don't try to query the + * printer status every couple of milliseconds, you will probably be OK. + */ +-static unsigned int usblp_quirks (__u16 vendor, __u16 product) ++static unsigned int usblp_quirks(__u16 vendor, __u16 product) + { + int i; + +@@ -1031,7 +1030,7 @@ static unsigned int usblp_quirks (__u16 + if (vendor == quirk_printers[i].vendorId && + product == quirk_printers[i].productId) + return quirk_printers[i].quirks; +- } ++ } + return 0; + } + +@@ -1061,7 +1060,7 @@ static struct usb_class_driver usblp_cla + static ssize_t usblp_show_ieee1284_id(struct device *dev, struct device_attribute *attr, char *buf) + { + struct usb_interface *intf = to_usb_interface(dev); +- struct usblp *usblp = usb_get_intfdata (intf); ++ struct usblp *usblp = usb_get_intfdata(intf); + + if (usblp->device_id_string[0] == 0 && + usblp->device_id_string[1] == 0) +@@ -1075,7 +1074,7 @@ static DEVICE_ATTR(ieee1284_id, S_IRUGO, + static int usblp_probe(struct usb_interface *intf, + const struct usb_device_id *id) + { +- struct usb_device *dev = interface_to_usbdev (intf); ++ struct usb_device *dev = interface_to_usbdev(intf); + struct usblp *usblp; + int protocol; + int retval; +@@ -1089,7 +1088,7 @@ static int usblp_probe(struct usb_interf + } + usblp->dev = dev; + mutex_init(&usblp->wmut); +- mutex_init (&usblp->mut); ++ mutex_init(&usblp->mut); + spin_lock_init(&usblp->lock); + init_waitqueue_head(&usblp->rwait); + init_waitqueue_head(&usblp->wwait); +@@ -1153,7 +1152,7 @@ static int usblp_probe(struct usb_interf + usblp_check_status(usblp, 0); + #endif + +- usb_set_intfdata (intf, usblp); ++ usb_set_intfdata(intf, usblp); + + usblp->present = 1; + +@@ -1177,7 +1176,7 @@ static int usblp_probe(struct usb_interf + return 0; + + abort_intfdata: +- usb_set_intfdata (intf, NULL); ++ usb_set_intfdata(intf, NULL); + device_remove_file(&intf->dev, &dev_attr_ieee1284_id); + abort: + kfree(usblp->readbuf); +@@ -1340,35 +1339,35 @@ static int usblp_cache_device_id_string( + + static void usblp_disconnect(struct usb_interface *intf) + { +- struct usblp *usblp = usb_get_intfdata (intf); ++ struct usblp *usblp = usb_get_intfdata(intf); + + usb_deregister_dev(intf, &usblp_class); + + if (!usblp || !usblp->dev) { + dev_err(&intf->dev, "bogus disconnect\n"); +- BUG (); ++ BUG(); + } + + device_remove_file(&intf->dev, &dev_attr_ieee1284_id); + +- mutex_lock (&usblp_mutex); +- mutex_lock (&usblp->mut); ++ mutex_lock(&usblp_mutex); ++ mutex_lock(&usblp->mut); + usblp->present = 0; + wake_up(&usblp->wwait); + wake_up(&usblp->rwait); +- usb_set_intfdata (intf, NULL); ++ usb_set_intfdata(intf, NULL); + + usblp_unlink_urbs(usblp); +- mutex_unlock (&usblp->mut); ++ mutex_unlock(&usblp->mut); + + if (!usblp->used) +- usblp_cleanup (usblp); +- mutex_unlock (&usblp_mutex); ++ usblp_cleanup(usblp); ++ mutex_unlock(&usblp_mutex); + } + + static int usblp_suspend(struct usb_interface *intf, pm_message_t message) + { +- struct usblp *usblp = usb_get_intfdata (intf); ++ struct usblp *usblp = usb_get_intfdata(intf); + + usblp_unlink_urbs(usblp); + #if 0 /* XXX Do we want this? What if someone is reading, should we fail? */ +@@ -1382,10 +1381,10 @@ static int usblp_suspend(struct usb_inte + + static int usblp_resume(struct usb_interface *intf) + { +- struct usblp *usblp = usb_get_intfdata (intf); ++ struct usblp *usblp = usb_get_intfdata(intf); + int r; + +- r = handle_bidir (usblp); ++ r = handle_bidir(usblp); + + return r; + } +@@ -1401,7 +1400,7 @@ static const struct usb_device_id usblp_ + { } /* Terminating entry */ + }; + +-MODULE_DEVICE_TABLE (usb, usblp_ids); ++MODULE_DEVICE_TABLE(usb, usblp_ids); + + static struct usb_driver usblp_driver = { + .name = "usblp", +@@ -1426,8 +1425,8 @@ static void __exit usblp_exit(void) + module_init(usblp_init); + module_exit(usblp_exit); + +-MODULE_AUTHOR( DRIVER_AUTHOR ); +-MODULE_DESCRIPTION( DRIVER_DESC ); ++MODULE_AUTHOR(DRIVER_AUTHOR); ++MODULE_DESCRIPTION(DRIVER_DESC); + module_param(proto_bias, int, S_IRUGO | S_IWUSR); + MODULE_PARM_DESC(proto_bias, "Favourite protocol number"); + MODULE_LICENSE("GPL"); diff --git a/usb/usb-xhci-trivial-use-array_size.patch b/usb/usb-xhci-trivial-use-array_size.patch new file mode 100644 index 00000000000000..87df12dd957d90 --- /dev/null +++ b/usb/usb-xhci-trivial-use-array_size.patch @@ -0,0 +1,39 @@ +From segooon@gmail.com Wed Jul 7 14:59:17 2010 +From: Kulikov Vasiliy <segooon@gmail.com> +Date: Mon, 28 Jun 2010 15:55:46 +0400 +Subject: USB: xhci: trivial: use ARRAY_SIZE +To: trivial@kernel.org +Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>, Greg Kroah-Hartman <gregkh@suse.de>, John Youn <John.Youn@synopsys.com>, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org +Message-ID: <1277726147-24933-1-git-send-email-segooon@gmail.com> + + +Change sizeof(x) / sizeof(*x) to ARRAY_SIZE(x). + +Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> +Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> +Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> + +--- + drivers/usb/host/xhci-mem.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/usb/host/xhci-mem.c ++++ b/drivers/usb/host/xhci-mem.c +@@ -1566,7 +1566,7 @@ static int xhci_check_trb_in_td_math(str + unsigned int num_tests; + int i, ret; + +- num_tests = sizeof(simple_test_vector) / sizeof(simple_test_vector[0]); ++ num_tests = ARRAY_SIZE(simple_test_vector); + for (i = 0; i < num_tests; i++) { + ret = xhci_test_trb_in_td(xhci, + xhci->event_ring->first_seg, +@@ -1579,7 +1579,7 @@ static int xhci_check_trb_in_td_math(str + return ret; + } + +- num_tests = sizeof(complex_test_vector) / sizeof(complex_test_vector[0]); ++ num_tests = ARRAY_SIZE(complex_test_vector); + for (i = 0; i < num_tests; i++) { + ret = xhci_test_trb_in_td(xhci, + complex_test_vector[i].input_seg, |