| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.16-rc4. It resolves a build
error in the rtl8723bs driver for some versions of clang on arm64 when
checking the frame size with -Wframe-larger-than.
It has been in linux-next for a while now with no reported issues"
* tag 'staging-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: Avoid memset() in aes_cipher() and aes_decipher()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are five small serial and tty and vt fixes for 6.16-rc4. Included
in here are:
- kerneldoc fixes for recent vt changes
- imx serial driver fix
- of_node sysfs fix for a regression
- vt missing notification fix
- 8250 dt bindings fix
All of these have been in linux-next for a while with no reported issues"
* tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
dt-bindings: serial: 8250: Make clocks and clock-frequency exclusive
serial: imx: Restore original RXTL for console to fix data loss
serial: core: restore of_node information in sysfs
vt: fix kernel-doc warnings in ucs_get_fallback()
vt: add missing notification when switching back to text mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Consider secondary address mask registers in amd64_edac in order to
get the correct total memory size of the system
* tag 'edac_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure DR6 and DR7 are initialized to their architectural values
and not accidentally cleared, leading to misconfigurations
* tag 'x86_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Initialize DR7 by writing its architectural reset value
x86/traps: Initialize DR6 by writing its architectural reset value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Make sure an AUX perf event is really disabled when it overruns
* tag 'perf_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Fix pending disable flow when the AUX ring buffer overruns
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Make sure the new futex phash is not copied during fork in order to
avoid a double-free
* tag 'locking_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Initialize futex_phash_new during fork().
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- imx: fix SMBus protocol compliance during block read
- omap: fix error handling path in probe
- robotfuzz, tiny-usb: prevent zero-length reads
- x86, designware, amdisp: fix build error when modules are disabled
(agreed to go in via i2c)
- scx200_acb: fix build error because of missing HAS_IOPORT
* tag 'i2c-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: scx200_acb: depends on HAS_IOPORT
i2c: omap: Fix an error handling path in omap_i2c_probe()
platform/x86: Use i2c adapter name to fix build errors
i2c: amd-isp: Initialize unique adapter name
i2c: designware: Initialize adapter name only when not set
i2c: tiny-usb: disable zero-length read messages
i2c: robotfuzz-osif: disable zero-length read messages
i2c: imx: fix emulated smbus block read
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
- Fix possible UAF on error path in filter_free_subsystem_filters()
When freeing a subsystem filter, the filter for the subsystem is
passed in to be freed and all the events within the subsystem will
have their filter freed too. In order to free without waiting for RCU
synchronization, list items are allocated to hold what is going to be
freed to free it via a call_rcu(). If the allocation of these items
fails, it will call the synchronization directly and free after that
(causing a bit of delay for the user).
The subsystem filter is first added to this list and then the filters
for all the events under the subsystem. The bug is if one of the
allocations of the list items for the event filters fail to allocate,
it jumps to the "free_now" label which will free the subsystem
filter, then all the items on the allocated list, and then the event
filters that were not added to the list yet. But because the
subsystem filter was added first, it gets freed twice.
The solution is to add the subsystem filter after the events, and
then if any of the allocations fail it will not try to free any of
them twice
* tag 'trace-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix filter logic error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- replace __ASSEMBLY__ with __ASSEMBLER__ in headers like others
- fix build warnings about export.h
- reserve the EFI memory map region for kdump
- handle __init vs inline mismatches
- fix some KVM bugs
* tag 'loongarch-fixes-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Disable updating of "num_cpu" and "feature"
LoongArch: KVM: Check validity of "num_cpu" from user space
LoongArch: KVM: Check interrupt route from physical CPU
LoongArch: KVM: Fix interrupt route update with EIOINTC
LoongArch: KVM: Add address alignment check for IOCSR emulation
LoongArch: KVM: Avoid overflow with array index
LoongArch: Handle KCOV __init vs inline mismatches
LoongArch: Reserve the EFI memory map region
LoongArch: Fix build warnings about export.h
LoongArch: Replace __ASSEMBLY__ with __ASSEMBLER__ in headers
|
|
Pull smb client fixes from Steve French:
- Multichannel reconnect lock ordering deadlock fix
- Fix for regression in handling native Windows symlinks
- Three smbdirect fixes:
- oops in RDMA response processing
- smbdirect memcpy issue
- fix smbdirect regression with large writes (smbdirect test cases
now all passing)
- Fix for "FAILED_TO_PARSE" warning in trace-cmd report output
* tag 'v6.16-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix reading into an ITER_FOLIOQ from the smbdirect code
cifs: Fix the smbd_response slab to allow usercopy
smb: client: fix potential deadlock when reconnecting channels
smb: client: remove \t from TP_printk statements
smb: client: let smbd_post_send_iter() respect the peers max_send_size and transmit all data
smb: client: fix regression with native SMB symlinks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes.
6 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels. 5 are for MM"
* tag 'mm-hotfixes-stable-2025-06-27-16-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add Lorenzo as THP co-maintainer
mailmap: update Duje Mihanović's email address
selftests/mm: fix validate_addr() helper
crashdump: add CONFIG_KEYS dependency
mailmap: correct name for a historical account of Zijun Hu
mailmap: add entries for Zijun Hu
fuse: fix runtime warning on truncate_folio_batch_exceptionals()
scripts/gdb: fix dentry_name() lookup
mm/damon/sysfs-schemes: free old damon_sysfs_scheme_filter->memcg_path on write
mm/alloc_tag: fix the kmemleak false positive issue in the allocation of the percpu variable tag->counters
lib/group_cpus: fix NULL pointer dereference from group_cpus_evenly()
mm/hugetlb: remove unnecessary holding of hugetlb_lock
MAINTAINERS: add missing files to mm page alloc section
MAINTAINERS: add tree entry to mm init block
mm: add OOM killer maintainer structure
fs/proc/task_mmu: fix PAGE_IS_PFNZERO detection for the huge zero folio
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V Fixes for 5.16-rc4
- .rodata is no longer linkd into PT_DYNAMIC.
It was not supposed to be there in the first place and resulted in
invalid (but unused) entries. This manifests as at least warnings in
llvm-readelf
- A fix for runtime constants with all-0 upper 32-bits. This should
only manifest on MMU=n kernels
- A fix for context save/restore on systems using the T-Head vector
extensions
- A fix for a conflicting "+r"/"r" register constraint in the VDSO
getrandom syscall wrapper, which is undefined behavior in clang
- A fix for a missing register clobber in the RVV raid6 implementation.
This manifests as a NULL pointer reference on some compilers, but
could trigger in other ways
- Misaligned accesses from userspace at faulting addresses are now
handled correctly
- A fix for an incorrect optimization that allowed access_ok() to mark
invalid addresses as accessible, which can result in userspace
triggering BUG()s
- A few fixes for build warnings, and an update to Drew's email address
* tag 'riscv-for-linus-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: export boot_cpu_hartid
Revert "riscv: Define TASK_SIZE_MAX for __access_ok()"
riscv: Fix sparse warning in vendor_extensions/sifive.c
Revert "riscv: misaligned: fix sleeping function called during misaligned access handling"
MAINTAINERS: Update Drew Fustini's email address
RISC-V: uaccess: Wrap the get_user_8 uaccess macro
raid6: riscv: Fix NULL pointer dereference caused by a missing clobber
RISC-V: vDSO: Correct inline assembly constraints in the getrandom syscall wrapper
riscv: vector: Fix context save/restore with xtheadvector
riscv: fix runtime constant support for nommu kernels
riscv: vdso: Exclude .rodata from the PT_DYNAMIC segment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fix from Bjorn Helgaas:
- Fix a PTM debugfs build error with CONFIG_DEBUG_FS=n &&
CONFIG_PCIE_PTM=y (Manivannan Sadhasivam)
* tag 'pci-v6.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/PTM: Build debugfs code only if CONFIG_DEBUG_FS is enabled
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly drm updates, nothing out of the ordinary, amdgpu, xe,
i915 and a few misc bits. Seems about right for this time in the
release cycle.
core:
- fix drm_writeback_connector_cleanup function signature
- use correct HDMI audio bridge in drm_connector_hdmi_audio_init
bridge:
- SN65DSI86: fix HPD
amdgpu:
- Cleaner shader support for additional GFX9 GPUs
- MES firmware compatibility fixes
- Discovery error reporting fixes
- SDMA6/7 userq fixes
- Backlight fix
- EDID sanity check
i915:
- Fix for SNPS PHY HDMI for 1080p@120Hz
- Correct DP AUX DPCD probe address
- Followup build fix for GCOV and AutoFDO enabled config
xe:
- Missing error check
- Fix xe_hwmon_power_max_write
- Move flushes
- Explicitly exit CT safe mode on unwind
- Process deferred GGTT node removals on device unwind"
* tag 'drm-fixes-2025-06-28' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Process deferred GGTT node removals on device unwind
drm/xe/guc: Explicitly exit CT safe mode on unwind
drm/xe: move DPT l2 flush to a more sensible place
drm/xe: Move DSB l2 flush to a more sensible place
drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type
drm/i915: fix build error some more
drm/xe/hwmon: Fix xe_hwmon_power_max_write
drm/xe/display: Add check for alloc_ordered_workqueue()
drm/amd/display: Add sanity checks for drm_edid_raw()
drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value
drm/amdgpu/sdma7: add ucode version checks for userq support
drm/amdgpu/sdma6: add ucode version checks for userq support
drm/amd: Adjust output for discovery error handling
drm/amdgpu/mes: add compatibility checks for set_hw_resource_1
drm/amdgpu/gfx9: Add Cleaner Shader Support for GFX9.x GPUs
drm/bridge-connector: Fix bridge in drm_connector_hdmi_audio_init()
drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS
drm/i915/snps_hdmi_pll: Fix 64-bit divisor truncation by using div64_u64
drm: writeback: Fix drm_writeback_connector_cleanup signature
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) fixes from Dave Jiang:
"These fixes address a few issues in the CXL subsystem, including
dealing with some bugs in the CXL EDAC and RAS drivers:
- Fix return value of cxlctl_validate_set_features()
- Fix min_scrub_cycle of a region miscaculation and add additional
documentation
- Fix potential memory leak issues for CXL EDAC
- Fix CPER handler device confusion for CXL RAS
- Fix using wrong repair type to check DRAM event record"
* tag 'cxl-fixes-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/edac: Fix using wrong repair type to check dram event record
cxl/ras: Fix CPER handler device confusion
cxl/edac: Fix potential memory leak issues
cxl/Documentation: Add more description about min/max scrub cycle
cxl/edac: Fix the min_scrub_cycle of a region miscalculation
cxl: fix return value in cxlctl_validate_set_features()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Fix a regression where the purgatory code sometimes fails to build"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: sha256: Mark sha256_choose_blocks as __always_inline
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16-rc4:
- Fix function signature of drm_writeback_connector_cleanup.
- Use correct HDMI audio bridge in drm_connector_hdmi_audio_init.
- Make HPD work on SN65DSI86.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/3dd1d5e1-73b6-4b0c-a208-f7d6235cf530@linux.intel.com
|
|
If the processing of the tr->events loop fails, the filter that has been
added to filter_head will be released twice in free_filter_list(&head->rcu)
and __free_filter(filter).
After adding the filter of tr->events, add the filter to the filter_head
process to avoid triggering uaf.
Link: https://lore.kernel.org/tencent_4EF87A626D702F816CD0951CE956EC32CD0A@qq.com
Fixes: a9d0aab5eb33 ("tracing: Fix regression of filter waiting a long time on RCU synchronization")
Reported-by: syzbot+daba72c4af9915e9c894@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=daba72c4af9915e9c894
Tested-by: syzbot+daba72c4af9915e9c894@syzkaller.appspotmail.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a commit that attempted to fix a memory leak in an error code
path and introduced a different issue (Zhe Qiao)"
* tag 'acpi-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PCI/ACPI: Fix allocated memory release on error in pci_acpi_scan_root()"
|
|
Pull block fixes from Jens Axboe:
- Fixes for ublk:
- fix C++ narrowing warnings in the uapi header
- update/improve UBLK_F_SUPPORT_ZERO_COPY comment in uapi header
- fix for the ublk ->queue_rqs() implementation, limiting a batch
to just the specific task AND ring
- ublk_get_data() error handling fix
- sanity check more arguments in ublk_ctrl_add_dev()
- selftest addition
- NVMe pull request via Christoph:
- reset delayed remove_work after reconnect
- fix atomic write size validation
- Fix for a warning introduced in bdev_count_inflight_rw() in this
merge window
* tag 'block-6.16-20250626' of git://git.kernel.dk/linux:
block: fix false warning in bdev_count_inflight_rw()
ublk: sanity check add_dev input for underflow
nvme: fix atomic write size validation
nvme: refactor the atomic write unit detection
nvme: reset delayed remove_work after reconnect
ublk: setup ublk_io correctly in case of ublk_get_data() failure
ublk: update UBLK_F_SUPPORT_ZERO_COPY comment in UAPI header
ublk: fix narrowing warnings in UAPI header
selftests: ublk: don't take same backing file for more than one ublk devices
ublk: build batch from IOs in same io_ring_ctx and io task
|
|
Pull io_uring fixes from Jens Axboe:
- Two tweaks for a recent fix: fixing a memory leak if multiple iovecs
were initially mapped but only the first was used and hence turned
into a UBUF rathan than an IOVEC iterator, and catching a case where
a retry would be done even if the previous segment wasn't full
- Small series fixing an issue making the vm unhappy if debugging is
turned on, hitting a VM_BUG_ON_PAGE()
- Fix a resource leak in io_import_dmabuf() in the error handling case,
which is a regression in this merge window
- Mark fallocate as needing to be write serialized, as is already done
for truncate and buffered writes
* tag 'io_uring-6.16-20250626' of git://git.kernel.dk/linux:
io_uring/kbuf: flag partial buffer mappings
io_uring/net: mark iov as dynamically allocated even for single segments
io_uring: fix resource leak in io_import_dmabuf()
io_uring: don't assume uaddr alignment in io_vec_fill_bvec
io_uring/rsrc: don't rely on user vaddr alignment
io_uring/rsrc: fix folio unpinning
io_uring: make fallocate be hashed work
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Use the correct DMI identifier for ASUSPRO-D840SA LPM quirk such that
the quirk actually gets applied (me)
* tag 'ata-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Use correct DMI identifier for ASUSPRO-D840SA LPM quirk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix incorrectly dropped dereferencing of the stack nth entry
introduced with a previous KASAN false positive fix
- Use a proper memdup_array_user() helper to prevent overflow in a
protected key size calculation
* tag 's390-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ptrace: Fix pointer dereferencing in regs_get_kernel_stack_nth()
s390/pkey: Prevent overflow in size calculation for memdup_user()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes again:
- A regression fix for hibernation bug in ASoC SoundWire
- Fixes for the new Qualcomm USB offload stuff
- A potential OOB access fix in USB-audio
- A potential memleadk fix in ASoC Intel
- Quirks for HD-audio and ASoC AMD ACP"
* tag 'sound-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix built-in mic on ASUS VivoBook X507UAR
ALSA: usb: qcom: fix NULL pointer dereference in qmi_stop_session
ASoC: SOF: Intel: hda: Use devm_kstrdup() to avoid memleak.
ASoC: rt721-sdca: fix boost gain calculation error
ALSA: qc_audio_offload: Fix missing error code in prepare_qmi_response()
ALSA: hda/realtek: Add mic-mute LED setup for ASUS UM5606
ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3()
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 6 G1a
ASoC: amd: ps: fix for soundwire failures during hibernation exit sequence
ASoC: amd: yc: Add DMI quirk for Lenovo IdeaPad Slim 5 15
ASoC: amd: yc: add quirk for Acer Nitro ANV15-41 internal mic
ASoC: qcom: sm8250: Fix possibly undefined reference
ALSA: hda/realtek - Enable mute LED on HP Pavilion Laptop 15-eg100
ALSA: hda/realtek: Add quirks for some Clevo laptops
|
|
It already depends on X86_32, but that's also set for ARCH=um.
Recent changes made UML no longer have IO port access since
it's not needed, but this driver uses it. Build it only for
HAS_IOPORT. This is pretty much the same as depending on X86,
but on the off-chance that HAS_IOPORT will ever be optional
on x86 HAS_IOPORT is the real prerequisite.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Property "num_cpu" and "feature" are read-only once eiointc is created,
which are set with KVM_DEV_LOONGARCH_EXTIOI_GRP_CTRL attr group before
device creation.
Attr group KVM_DEV_LOONGARCH_EXTIOI_GRP_SW_STATUS is to update register
and software state for migration and reset usage, property "num_cpu" and
"feature" can not be update again if it is created already.
Here discard write operation with property "num_cpu" and "feature" in
attr group KVM_DEV_LOONGARCH_EXTIOI_GRP_CTRL.
Cc: stable@vger.kernel.org
Fixes: 1ad7efa552fd ("LoongArch: KVM: Add EIOINTC user mode read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The maximum supported cpu number is EIOINTC_ROUTE_MAX_VCPUS about
irqchip EIOINTC, here add validation about cpu number to avoid array
pointer overflow.
Cc: stable@vger.kernel.org
Fixes: 1ad7efa552fd ("LoongArch: KVM: Add EIOINTC user mode read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
With EIOINTC interrupt controller, physical CPU ID is set for irq route.
However the function kvm_get_vcpu() is used to get destination vCPU when
delivering irq. With API kvm_get_vcpu(), the logical CPU ID is used.
With API kvm_get_vcpu_by_cpuid(), vCPU ID can be searched from physical
CPU ID.
Cc: stable@vger.kernel.org
Fixes: 3956a52bc05b ("LoongArch: KVM: Add EIOINTC read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
With function eiointc_update_sw_coremap(), there is forced assignment
like val = *(u64 *)pvalue. Parameter pvalue may be pointer to char type
or others, there is problem with forced assignment with u64 type.
Here the detailed value is passed rather address pointer.
Cc: stable@vger.kernel.org
Fixes: 3956a52bc05b ("LoongArch: KVM: Add EIOINTC read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
IOCSR instruction supports 1/2/4/8 bytes access, the address should be
naturally aligned with its access size. Here address alignment check is
added in the EIOINTC kernel emulation.
Cc: stable@vger.kernel.org
Fixes: 3956a52bc05b ("LoongArch: KVM: Add EIOINTC read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host fixes for v6.16-rc4
- imx: fix SMBus protocol compliance during block read
- omap: fix error handling path in probe
- robotfuzz, tiny-usb: prevent zero-length reads
- x86, designware, amdisp: fix build error when modules are
disabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a regression where wp512 can no longer be used with hmac"
* tag 'v6.16-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: wp512 - Use API partial block handling
|
|
Pull bcachefs fixes from Kent Overstreet:
- Lots of small check/repair fixes, primarily in subvol loop and
directory structure loop (when involving snapshots).
- Fix a few 6.16 regressions: rare UAF in the foreground allocator path
when taking a transaction restart from the transaction bump
allocator, and some small fallout from the change to log the error
being corrected in the journal when repairing errors, also some
fallout from the btree node read error logging improvements.
(Alan, Bharadwaj)
- New option: journal_rewind
This lets the entire filesystem be reset to an earlier point in time.
Note that this is only a disaster recovery tool, and right now there
are major caveats to using it (discards should be disabled, in
particular), but it successfully restored the filesystem of one of
the users who was bit by the subvolume deletion bug and didn't have
backups. I'll likely be making some changes to the discard path in
the future to make this a reliable recovery tool.
- Some new btree iterator tracepoints, for tracking down some
livelock-ish behaviour we've been seeing in the main data write path.
* tag 'bcachefs-2025-06-26' of git://evilpiepirate.org/bcachefs: (51 commits)
bcachefs: Plumb correct ip to trans_relock_fail tracepoint
bcachefs: Ensure we rewind to run recovery passes
bcachefs: Ensure btree node scan runs before checking for scanned nodes
bcachefs: btree_root_unreadable_and_scan_found_nothing should not be autofix
bcachefs: fix bch2_journal_keys_peek_prev_min() underflow
bcachefs: Use wait_on_allocator() when allocating journal
bcachefs: Check for bad write buffer key when moving from journal
bcachefs: Don't unlock the trans if ret doesn't match BCH_ERR_operation_blocked
bcachefs: Fix range in bch2_lookup_indirect_extent() error path
bcachefs: fix spurious error_throw
bcachefs: Add missing bch2_err_class() to fileattr_set()
bcachefs: Add missing key type checks to check_snapshot_exists()
bcachefs: Don't log fsck err in the journal if doing repair elsewhere
bcachefs: Fix *__bch2_trans_subbuf_alloc() error path
bcachefs: Fix missing newlines before ero
bcachefs: fix spurious error in read_btree_roots()
bcachefs: fsck: Fix oops in key_visible_in_snapshot()
bcachefs: fsck: fix unhandled restart in topology repair
bcachefs: fsck: Fix check_directory_structure when no check_dirents
bcachefs: Fix restart handling in btree_node_scrub_work()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for stalls during suspend/resume cycles with hid-nintendo (Daniel
J. Ogorchock)
- memory leak and reference count fixes in hid-wacom and in-appletb-kdb
(Qasim Ijaz)
- race condition (leading to kernel crash) fix during device removal in
hid-wacom (Thomas Zeitlhofer)
- fix for missed interrupt in intel-thc-hid (Intel-thc-hid:)
- support for a bunch of new device IDs
* tag 'hid-for-linus-2025062701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: lenovo: Add support for ThinkPad X1 Tablet Thin Keyboard Gen2
HID: appletb-kbd: fix "appletb_backlight" backlight device reference counting
HID: wacom: fix crash in wacom_aes_battery_handler()
HID: intel-ish-hid: ipc: Add Wildcat Lake PCI device ID
hid: intel-ish-hid: Use PCI_DEVICE_DATA() macro for ISH device table
HID: lenovo: Restrict F7/9/11 mode to compact keyboards only
HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY
HID: input: lower message severity of 'No inputs registered, leaving' to debug
HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras
HID: Intel-thc-hid: Intel-quicki2c: Enhance QuickI2C reset flow
HID: nintendo: avoid bluetooth suspend/resume stalls
HID: wacom: fix kobject reference count leak
HID: wacom: fix memory leak on sysfs attribute creation failure
HID: wacom: fix memory leak on kobject creation failure
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
Driver Changes:
- Missing error check (Haoxiang Li)
- Fix xe_hwmon_power_max_write (Karthik)
- Move flushes (Maarten and Matthew Auld)
- Explicitly exit CT safe mode on unwind (Michal)
- Process deferred GGTT node removals on device unwind (Michal)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aF1T6EzzC3xj4K4H@fedora
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix for SNPS PHY HDMI for 1080p@120Hz
- Correct DP AUX DPCD probe address
- Followup build fix for GCOV and AutoFDO enabled config
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aFzsHR9WLYsxg8jy@jlahtine-mobl
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.16-2025-25-25:
amdgpu:
- Cleaner shader support for additional GFX9 GPUs
- MES firmware compatibility fixes
- Discovery error reporting fixes
- SDMA6/7 userq fixes
- Backlight fix
- EDID sanity check
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250625151734.11537-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
applied for nios2, but never sent upstream.
- Fix extra '/' in fsl,ls1028a-reset '$id' path
- Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.
* tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: serial: Convert altr,uart-1.0 to DT schema
dt-bindings: serial: Convert altr,juart-1.0 to DT schema
dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id
dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings
|
|
A previous commit aborted mapping more for a non-incremental ring for
bundle peeking, but depending on where in the process this peeking
happened, it would not necessarily prevent a retry by the user. That can
create gaps in the received/read data.
Add struct buf_sel_arg->partial_map, which can pass this information
back. The networking side can then map that to internal state and use it
to gate retry as well.
Since this necessitates a new flag, change io_sr_msg->retry to a
retry_flags member, and store both the retry and partial map condition
in there.
Cc: stable@vger.kernel.org
Fixes: 26ec15e4b0c1 ("io_uring/kbuf: don't truncate end buffer for multiple buffer peeks")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- bridge: fix use-after-free during router port configuration
Current release - new code bugs:
- eth: wangxun: fix the creation of page_pool
Previous releases - regressions:
- netpoll: initialize UDP checksum field before checksumming
- wifi: mac80211: finish link init before RCU publish
- bluetooth: fix use-after-free in vhci_flush()
- eth:
- ionic: fix DMA mapping test
- bnxt: properly flush XDP redirect lists
Previous releases - always broken:
- netlink: specs: enforce strict naming of properties
- unix: don't leave consecutive consumed OOB skbs.
- vsock: fix linux/vm_sockets.h userspace compilation errors
- selftests: fix TCP packet checksum"
* tag 'net-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: libwx: fix the creation of page_pool
net: selftests: fix TCP packet checksum
atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister().
netlink: specs: enforce strict naming of properties
netlink: specs: tc: replace underscores with dashes in names
netlink: specs: rt-link: replace underscores with dashes in names
netlink: specs: mptcp: replace underscores with dashes in names
netlink: specs: ovs_flow: replace underscores with dashes in names
netlink: specs: devlink: replace underscores with dashes in names
netlink: specs: dpll: replace underscores with dashes in names
netlink: specs: ethtool: replace underscores with dashes in names
netlink: specs: fou: replace underscores with dashes in names
netlink: specs: nfsd: replace underscores with dashes in names
net: enetc: Correct endianness handling in _enetc_rd_reg64
atm: idt77252: Add missing `dma_map_error()`
bnxt: properly flush XDP redirect lists
vsock/uapi: fix linux/vm_sockets.h userspace compilation errors
wifi: mac80211: finish link init before RCU publish
wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version
selftest: af_unix: Add tests for -ECONNRESET.
...
|
|
When performing a file read from RDMA, smbd_recv() prints an "Invalid msg
type 4" error and fails the I/O. This is due to the switch-statement there
not handling the ITER_FOLIOQ handed down from netfslib.
Fix this by collapsing smbd_recv_buf() and smbd_recv_page() into
smbd_recv() and just using copy_to_iter() instead of memcpy(). This
future-proofs the function too, in case more ITER_* types are added.
Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading")
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Tom Talpey <tom@talpey.com>
cc: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The handling of received data in the smbdirect client code involves using
copy_to_iter() to copy data from the smbd_reponse struct's packet trailer
to a folioq buffer provided by netfslib that encapsulates a chunk of
pagecache.
If, however, CONFIG_HARDENED_USERCOPY=y, this will result in the checks
then performed in copy_to_iter() oopsing with something like the following:
CIFS: Attempting to mount //172.31.9.1/test
CIFS: VFS: RDMA transport established
usercopy: Kernel memory exposure attempt detected from SLUB object 'smbd_response_0000000091e24ea1' (offset 81, size 63)!
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:102!
...
RIP: 0010:usercopy_abort+0x6c/0x80
...
Call Trace:
<TASK>
__check_heap_object+0xe3/0x120
__check_object_size+0x4dc/0x6d0
smbd_recv+0x77f/0xfe0 [cifs]
cifs_readv_from_socket+0x276/0x8f0 [cifs]
cifs_read_from_socket+0xcd/0x120 [cifs]
cifs_demultiplex_thread+0x7e9/0x2d50 [cifs]
kthread+0x396/0x830
ret_from_fork+0x2b8/0x3b0
ret_from_fork_asm+0x1a/0x30
The problem is that the smbd_response slab's packet field isn't marked as
being permitted for usercopy.
Fix this by passing parameters to kmem_slab_create() to indicate that
copy_to_iter() is permitted from the packet region of the smbd_response
slab objects, less the header space.
Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading")
Reported-by: Stefan Metzmacher <metze@samba.org>
Link: https://lore.kernel.org/r/acb7f612-df26-4e2a-a35d-7cd040f513e1@samba.org/
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Tested-by: Stefan Metzmacher <metze@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix cifs_signal_cifsd_for_reconnect() to take the correct lock order
and prevent the following deadlock from happening
======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc3-build2+ #1301 Tainted: G S W
------------------------------------------------------
cifsd/6055 is trying to acquire lock:
ffff88810ad56038 (&tcp_ses->srv_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x134/0x200
but task is already holding lock:
ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&ret_buf->chan_lock){+.+.}-{3:3}:
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_setup_session+0x81/0x4b0
cifs_get_smb_ses+0x771/0x900
cifs_mount_get_session+0x7e/0x170
cifs_mount+0x92/0x2d0
cifs_smb3_do_mount+0x161/0x460
smb3_get_tree+0x55/0x90
vfs_get_tree+0x46/0x180
do_new_mount+0x1b0/0x2e0
path_mount+0x6ee/0x740
do_mount+0x98/0xe0
__do_sys_mount+0x148/0x180
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&ret_buf->ses_lock){+.+.}-{3:3}:
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_match_super+0x101/0x320
sget+0xab/0x270
cifs_smb3_do_mount+0x1e0/0x460
smb3_get_tree+0x55/0x90
vfs_get_tree+0x46/0x180
do_new_mount+0x1b0/0x2e0
path_mount+0x6ee/0x740
do_mount+0x98/0xe0
__do_sys_mount+0x148/0x180
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (&tcp_ses->srv_lock){+.+.}-{3:3}:
check_noncircular+0x95/0xc0
check_prev_add+0x115/0x2f0
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_signal_cifsd_for_reconnect+0x134/0x200
__cifs_reconnect+0x8f/0x500
cifs_handle_standard+0x112/0x280
cifs_demultiplex_thread+0x64d/0xbc0
kthread+0x2f7/0x310
ret_from_fork+0x2a/0x230
ret_from_fork_asm+0x1a/0x30
other info that might help us debug this:
Chain exists of:
&tcp_ses->srv_lock --> &ret_buf->ses_lock --> &ret_buf->chan_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ret_buf->chan_lock);
lock(&ret_buf->ses_lock);
lock(&ret_buf->chan_lock);
lock(&tcp_ses->srv_lock);
*** DEADLOCK ***
3 locks held by cifsd/6055:
#0: ffffffff857de398 (&cifs_tcp_ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x7b/0x200
#1: ffff888119c64060 (&ret_buf->ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x9c/0x200
#2: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200
Cc: linux-cifs@vger.kernel.org
Reported-by: David Howells <dhowells@redhat.com>
Fixes: d7d7a66aacd6 ("cifs: avoid use of global locks for high contention data")
Reviewed-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
While bdev_count_inflight is interating all cpus, if some IOs are issued
from traversed cpu and then completed from the cpu that is not traversed
yet:
cpu0
cpu1
bdev_count_inflight
//for_each_possible_cpu
// cpu0 is 0
infliht += 0
// issue a io
blk_account_io_start
// cpu0 inflight ++
cpu2
// the io is done
blk_account_io_done
// cpu2 inflight --
// cpu 1 is 0
inflight += 0
// cpu2 is -1
inflight += -1
...
In this case, the total inflight will be -1, causing lots of false
warning. Fix the problem by removing the warning.
Noted there is still a valid warning for nvme-mpath(From Yi) that is not
fixed yet.
Fixes: f5482ee5edb9 ("block: WARN if bdev inflight counter is negative")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/aFtUXy-lct0WxY2w@mozart.vkv.me/T/#mae89155a5006463d0a21a4a2c35ae0034b26a339
Reported-and-tested-by: Calvin Owens <calvin@wbinvd.org>
Closes: https://lore.kernel.org/linux-block/aFtUXy-lct0WxY2w@mozart.vkv.me/T/#m1d935a00070bf95055d0ac84e6075158b08acaef
Reported-by: Dave Chinner <david@fromorbit.com>
Closes: https://lore.kernel.org/linux-block/aFuypjqCXo9-5_En@dread.disaster.area/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250626115743.1641443-1-yukuai3@huawei.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NVMe fixes from Christoph:
" - reset delayed remove_work after reconnect (Keith Busch)
- fix atomic write size validation (Christoph Hellwig)"
* tag 'nvme-6.16-2025-06-26' of git://git.infradead.org/nvme:
nvme: fix atomic write size validation
nvme: refactor the atomic write unit detection
nvme: reset delayed remove_work after reconnect
|
|
Add additional checks that queue depth and number of queues are
non-zero.
Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250626022046.235018-1-ronniesahlberg@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While we are indirectly draining our dedicated workqueue ggtt->wq
that we use to complete asynchronous removal of some GGTT nodes,
this happends as part of the managed-drm unwinding (ggtt_fini_early),
which could be later then manage-device unwinding, where we could
already unmap our MMIO/GMS mapping (mmio_fini).
This was recently observed during unsuccessful VF initialization:
[ ] xe 0000:00:02.1: probe with driver xe failed with error -62
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747340 __xe_bo_unpin_map_no_vm (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747540 __xe_bo_unpin_map_no_vm (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747240 __xe_bo_unpin_map_no_vm (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747040 tiles_fini (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e746840 mmio_fini (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747f40 xe_bo_pinned_fini (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e746b40 devm_drm_dev_init_release (16 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] drmres release begin
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef81640 __fini_relay (8 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80d40 guc_ct_fini (8 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80040 __drmm_mutex_release (8 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80140 ggtt_fini_early (8 bytes)
and this was leading to:
[ ] BUG: unable to handle page fault for address: ffffc900058162a0
[ ] #PF: supervisor write access in kernel mode
[ ] #PF: error_code(0x0002) - not-present page
[ ] Oops: Oops: 0002 [#1] SMP NOPTI
[ ] Tainted: [W]=WARN
[ ] Workqueue: xe-ggtt-wq ggtt_node_remove_work_func [xe]
[ ] RIP: 0010:xe_ggtt_set_pte+0x6d/0x350 [xe]
[ ] Call Trace:
[ ] <TASK>
[ ] xe_ggtt_clear+0xb0/0x270 [xe]
[ ] ggtt_node_remove+0xbb/0x120 [xe]
[ ] ggtt_node_remove_work_func+0x30/0x50 [xe]
[ ] process_one_work+0x22b/0x6f0
[ ] worker_thread+0x1e8/0x3d
Add managed-device action that will explicitly drain the workqueue
with all pending node removals prior to releasing MMIO/GSM mapping.
Fixes: 919bb54e989c ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250612220937.857-2-michal.wajdeczko@intel.com
(cherry picked from commit 89d2835c3680ab1938e22ad81b1c9f8c686bd391)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
During driver probe we might be briefly using CT safe mode, which
is based on a delayed work, but usually we are able to stop this
once we have IRQ fully operational. However, if we abort the probe
quite early then during unwind we might try to destroy the workqueue
while there is still a pending delayed work that attempts to restart
itself which triggers a WARN.
This was recently observed during unsuccessful VF initialization:
[ ] xe 0000:00:02.1: probe with driver xe failed with error -62
[ ] ------------[ cut here ]------------
[ ] workqueue: cannot queue safe_mode_worker_func [xe] on wq xe-g2h-wq
[ ] WARNING: CPU: 9 PID: 0 at kernel/workqueue.c:2257 __queue_work+0x287/0x710
[ ] RIP: 0010:__queue_work+0x287/0x710
[ ] Call Trace:
[ ] delayed_work_timer_fn+0x19/0x30
[ ] call_timer_fn+0xa1/0x2a0
Exit the CT safe mode on unwind to avoid that warning.
Fixes: 09b286950f29 ("drm/xe/guc: Allow CTB G2H processing without G2H IRQ")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250612220937.857-3-michal.wajdeczko@intel.com
(cherry picked from commit 2ddbb73ec20b98e70a5200cb85deade22ccea2ec)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Only need the flush for DPT host updates here. Normal GGTT updates don't
need special flush.
Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606104546.1996818-4-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 35db1da40c8cfd7511dc42f342a133601eb45449)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Flushing l2 is only needed after all data has been written.
Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250606104546.1996818-3-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 0dd2dd0182bc444a62652e89d08c7f0e4fde15ba)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The variable index is modified and reused as array index when modify
register EIOINTC_ENABLE. There will be array index overflow problem.
Cc: stable@vger.kernel.org
Fixes: 3956a52bc05b ("LoongArch: KVM: Add EIOINTC read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When the KCOV is enabled all functions get instrumented, unless
the __no_sanitize_coverage attribute is used. To prepare for
__no_sanitize_coverage being applied to __init functions, we have to
handle differences in how GCC's inline optimizations get resolved.
For LoongArch this exposed several places where __init annotations
were missing but ended up being "accidentally correct". So fix these
cases.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The EFI memory map at 'boot_memmap' is crucial for kdump to understand
the primary kernel's memory layout. This memory region, typically part
of EFI Boot Services (BS) data, can be overwritten after ExitBootServices
if not explicitly preserved by the kernel.
This commit addresses this by:
1. Calling memblock_reserve() to reserve the entire physical region
occupied by the EFI memory map (header + descriptors). This prevents
the primary kernel from reallocating and corrupting this area.
2. Setting the EFI_PRESERVE_BS_REGIONS flag in efi.flags. This indicates
that efforts have been made to preserve critical BS code/data regions
which can be useful for other kernel subsystems or debugging.
These changes ensure the original EFI memory map data remains intact,
improving kdump reliability and potentially aiding other EFI-related
functionalities that might rely on preserved BS code/data.
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
After commit a934a57a42f64a4 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and 7d95680d64ac8e836c ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1"), we get some build
warnings with W=1:
arch/loongarch/kernel/acpi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/alternative.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/kfpu.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/traps.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/unwind_guess.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/unwind_orc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/unwind_prologue.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/lib/crc32-loongarch.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/lib/csum.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/elf.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
arch/loongarch/kernel/paravirt.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
arch/loongarch/pci/pci.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
So fix these build warnings for LoongArch.
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembler code, __ASSEMBLY__ is a macro
that only gets defined by the Makefiles in the kernel. This is bad
since macros starting with two underscores are names that are reserved
by the C language. It can also be very confusing for the developers
when switching between userspace and kernelspace coding, or when
dealing with uapi headers that rather should use __ASSEMBLER__ instead.
So let's now standardize on the __ASSEMBLER__ macro that is provided
by the compilers.
This is almost a completely mechanical patch (done with a simple
"sed -i" statement), with one comment tweaked manually in the
arch/loongarch/include/asm/cpu.h file (it was missing the trailing
underscores).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Don't mix the namespace and controller values, and validate the
per-controller limit when probing the controller. This avoid spurious
failures for controllers with namespaces that have different namespaces
with different logical block sizes, or report the per-namespace values
only for some namespaces.
It also fixes a missing queue_limits_cancel_update in an error path by
removing that error path.
Fixes: 8695f060a029 ("nvme: all namespaces in a subsystem must adhere to a common atomic write size")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
|
|
Move all the code out of nvme_update_disk_info into the helper, and
rename the helper to have a somewhat less clumsy name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
|
|
The remove_work will proceed with permanently disconnecting on the
initial final path failure if the head shows no paths after the delay.
If a new path connects while the remove_work is pending, and if that new
path happens to disconnect before that remove_work executes, the delayed
removal should reset based on the most recent path disconnect time, but
queue_delayed_work() won't do anything if the work is already pending.
Attempt to cancel the delayed work when a new path connects, and use
mod_delayed_work() in case the remove_work remains pending anyway.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
'rx_ring->size' means the count of ring descriptors multiplied by the
size of one descriptor. When increasing the count of ring descriptors,
it may exceed the limit of pool size.
[ 864.209610] page_pool_create_percpu() gave up with errno -7
[ 864.209613] txgbe 0000:11:00.0: Page pool creation failed: -7
Fix to set the pool_size to the count of ring descriptors.
Fixes: 850b971110b2 ("net: libwx: Allocate Rx and Tx resources")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/434C72BFB40E350A+20250625023924.21821-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The length in the pseudo header should be the length of the L3 payload
AKA the L4 header+payload. The selftest code builds the packet from
the lower layers up, so all the headers are pushed already when it
constructs L4. We need to subtract the lower layer headers from skb->len.
Fixes: 3e1e58d64c3d ("net: add generic selftest support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250624183258.3377740-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If an AUX event overruns, the event core layer intends to disable the
event by setting the 'pending_disable' flag. Unfortunately, the event
is not actually disabled afterwards.
In commit:
ca6c21327c6a ("perf: Fix missing SIGTRAPs")
the 'pending_disable' flag was changed to a boolean. However, the
AUX event code was not updated accordingly. The flag ends up holding a
CPU number. If this number is zero, the flag is taken as false and the
IRQ work is never triggered.
Later, with commit:
2b84def990d3 ("perf: Split __perf_pending_irq() out of perf_pending_irq()")
a new IRQ work 'pending_disable_irq' was introduced to handle event
disabling. The AUX event path was not updated to kick off the work queue.
To fix this bug, when an AUX ring buffer overrun is detected, call
perf_event_disable_inatomic() to initiate the pending disable flow.
Also update the outdated comment for setting the flag, to reflect the
boolean values (0 or 1).
Fixes: 2b84def990d3 ("perf: Split __perf_pending_irq() out of perf_pending_irq()")
Fixes: ca6c21327c6a ("perf: Fix missing SIGTRAPs")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Liang Kan <kan.liang@linux.intel.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20250625170737.2918295-1-leo.yan@arm.com
|
|
The built-in mic of ASUS VivoBook X507UAR is broken recently by the fix
of the pin sort. The fixup ALC256_FIXUP_ASUS_MIC_NO_PRESENCE is working
for addressing the regression, too.
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Reported-by: Igor Tamara <igor.tamara@gmail.com>
Closes: https://bugs.debian.org/1108069
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Link: https://lore.kernel.org/CADdHDco7_o=4h_epjEAb92Dj-vUz_PoTC2-W9g5ncT2E0NzfeQ@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A small collection of fixes, the main one being a fix for resume from
hibernation on AMD systems, plus a few new quirk entries for AMD
systems.
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix use-after-free in libbpf when map is resized (Adin Scannell)
- Fix verifier assumptions about 2nd argument of bpf_sysctl_get_name
(Jerome Marchand)
- Fix verifier assumption of nullness of d_inode in dentry (Song Liu)
- Fix global starvation of LRU map (Willem de Bruijn)
- Fix potential NULL dereference in btf_dump__free (Yuan Chen)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: adapt one more case in test_lru_map to the new target_free
libbpf: Fix possible use-after-free for externs
selftests/bpf: Convert test_sysctl to prog_tests
bpf: Specify access type of bpf_sysctl_get_name args
libbpf: Fix null pointer dereference in btf_dump__free on allocation failure
bpf: Adjust free target to avoid global starvation of LRU map
bpf: Mark dentry->d_inode as trusted_or_null
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix a 6.16 regression from the recovery pass rework, which introduced a
bug where calling bch2_run_explicit_recovery_pass() would only return
the error code to rewind recovery for the first call that scheduled that
recovery pass.
If the error code from the first call was swallowed (because it was
called by an asynchronous codepath), subsequent calls would go "ok, this
pass is already marked as needing to run" and return 0.
Fixing this ensures that check_topology bails out to run btree_node_scan
before doing any repair.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, calling bch2_btree_has_scanned_nodes() when btree node
scan hadn't actually run would erroniously return false - causing us to
think a btree was entirely gone.
This fixes a 6.16 regression from moving the scheduling of btree node
scan out of bch2_btree_lost_data() (fixing the bug where we'd schedule
it persistently in the superblock) and only scheduling it when
check_toploogy() is asking for scanned btree nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Autofix is specified in btree_gc.c if it's not an important btree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull mount fixes from Al Viro:
"Several mount-related fixes"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
userns and mnt_idmap leak in open_tree_attr(2)
attach_recursive_mnt(): do not lock the covering tree when sliding something under it
replace collect_mounts()/drop_collected_mounts() with a safer variant
|
|
syzbot reported a warning below during atm_dev_register(). [0]
Before creating a new device and procfs/sysfs for it, atm_dev_register()
looks up a duplicated device by __atm_dev_lookup(). These operations are
done under atm_dev_mutex.
However, when removing a device in atm_dev_deregister(), it releases the
mutex just after removing the device from the list that __atm_dev_lookup()
iterates over.
So, there will be a small race window where the device does not exist on
the device list but procfs/sysfs are still not removed, triggering the
splat.
Let's hold the mutex until procfs/sysfs are removed in
atm_dev_deregister().
[0]:
proc_dir_entry 'atm/atmtcp:0' already registered
WARNING: CPU: 0 PID: 5919 at fs/proc/generic.c:377 proc_register+0x455/0x5f0 fs/proc/generic.c:377
Modules linked in:
CPU: 0 UID: 0 PID: 5919 Comm: syz-executor284 Not tainted 6.16.0-rc2-syzkaller-00047-g52da431bf03b #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
RIP: 0010:proc_register+0x455/0x5f0 fs/proc/generic.c:377
Code: 48 89 f9 48 c1 e9 03 80 3c 01 00 0f 85 a2 01 00 00 48 8b 44 24 10 48 c7 c7 20 c0 c2 8b 48 8b b0 d8 00 00 00 e8 0c 02 1c ff 90 <0f> 0b 90 90 48 c7 c7 80 f2 82 8e e8 0b de 23 09 48 8b 4c 24 28 48
RSP: 0018:ffffc9000466fa30 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817ae248
RDX: ffff888026280000 RSI: ffffffff817ae255 RDI: 0000000000000001
RBP: ffff8880232bed48 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff888076ed2140
R13: dffffc0000000000 R14: ffff888078a61340 R15: ffffed100edda444
FS: 00007f38b3b0c6c0(0000) GS:ffff888124753000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f38b3bdf953 CR3: 0000000076d58000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
proc_create_data+0xbe/0x110 fs/proc/generic.c:585
atm_proc_dev_register+0x112/0x1e0 net/atm/proc.c:361
atm_dev_register+0x46d/0x890 net/atm/resources.c:113
atmtcp_create+0x77/0x210 drivers/atm/atmtcp.c:369
atmtcp_attach drivers/atm/atmtcp.c:403 [inline]
atmtcp_ioctl+0x2f9/0xd60 drivers/atm/atmtcp.c:464
do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
sock_do_ioctl+0x115/0x280 net/socket.c:1190
sock_ioctl+0x227/0x6b0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f38b3b74459
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f38b3b0c198 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f38b3bfe318 RCX: 00007f38b3b74459
RDX: 0000000000000000 RSI: 0000000000006180 RDI: 0000000000000005
RBP: 00007f38b3bfe310 R08: 65732f636f72702f R09: 65732f636f72702f
R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f38b3bcb0ac
R13: 00007f38b3b0c1a0 R14: 0000200000000200 R15: 00007f38b3bcb03b
</TASK>
Fixes: 64bf69ddff76 ("[ATM]: deregistration removes device from atm_devs list immediately")
Reported-by: syzbot+8bd335d2ad3b93e80715@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/685316de.050a0220.216029.0087.GAE@google.com/
Tested-by: syzbot+8bd335d2ad3b93e80715@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250624214505.570679-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I am doing a great deal of review and getting ever more involved in THP
with intent to do more so in future also, so add myself as co-maintainer
to help David with workload.
Link: https://lkml.kernel.org/r/20250625095231.42874-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Dev Jain <dev.jain@arm.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Barry Song <baohua@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I'm switching to a new mail address, so map my old one to it.
Link: https://lkml.kernel.org/r/20250620-mailmap-v1-1-a6b4b72dbd07@dujemihanovic.xyz
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Cc: Karel Balej <balejk@matfyz.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
validate_addr() checks whether the address returned by mmap() lies in the
low or high VA space, according to whether a high addr hint was passed or
not. The fix commit mentioned below changed the code in such a way that
this function will always return failure when passed high_addr == 1; addr
will be >= HIGH_ADDR_MARK always, we will fall down to "if (addr >
HIGH_ADDR_MARK)" and return failure. Fix this.
Link: https://lkml.kernel.org/r/20250620111150.50344-1-dev.jain@arm.com
Fixes: d1d86ce28d0f ("selftests/mm: virtual_address_range: conform to TAP format output")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The dm_crypt code fails to build without CONFIG_KEYS:
kernel/crash_dump_dm_crypt.c: In function 'restore_dm_crypt_keys_to_thread_keyring':
kernel/crash_dump_dm_crypt.c:105:9: error: unknown type name 'key_ref_t'; did you mean 'key_ref_put'?
There is a mix of 'select KEYS' and 'depends on KEYS' in Kconfig,
so there is no single obvious solution here, but generally using 'depends on'
makes more sense and is less likely to cause dependency loops.
Link: https://lkml.kernel.org/r/20250620112140.3396316-1-arnd@kernel.org
Fixes: 62f17d9df692 ("crash_dump: retrieve dm crypt keys in kdump kernel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Vasilevsky <dave@vasilevsky.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Correct the name for <zijun_hu@htc.com> from 'zijun_hu' to 'Zijun Hu'.
Link: https://lkml.kernel.org/r/20250620-my_mailmap-v1-2-11ea3db8ba1e@oss.qualcomm.com
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Cc: Hans verkuil <hverkuil@xs4all.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Map my old qualcomm email addresses:
Zijun Hu <quic_zijuhu@quicinc.com>
Zijun Hu <zijuhu@codeaurora.org>
To the current one:
Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lkml.kernel.org/r/20250620-my_mailmap-v1-1-11ea3db8ba1e@oss.qualcomm.com
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Cc: Hans verkuil <hverkuil@xs4all.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The WARN_ON_ONCE is introduced on truncate_folio_batch_exceptionals() to
capture whether the filesystem has removed all DAX entries or not.
And the fix has been applied on the filesystem xfs and ext4 by the commit
0e2f80afcfa6 ("fs/dax: ensure all pages are idle prior to filesystem
unmount").
Apply the missed fix on filesystem fuse to fix the runtime warning:
[ 2.011450] ------------[ cut here ]------------
[ 2.011873] WARNING: CPU: 0 PID: 145 at mm/truncate.c:89 truncate_folio_batch_exceptionals+0x272/0x2b0
[ 2.012468] Modules linked in:
[ 2.012718] CPU: 0 UID: 1000 PID: 145 Comm: weston Not tainted 6.16.0-rc2-WSL2-STABLE #2 PREEMPT(undef)
[ 2.013292] RIP: 0010:truncate_folio_batch_exceptionals+0x272/0x2b0
[ 2.013704] Code: 48 63 d0 41 29 c5 48 8d 1c d5 00 00 00 00 4e 8d 6c 2a 01 49 c1 e5 03 eb 09 48 83 c3 08 49 39 dd 74 83 41 f6 44 1c 08 01 74 ef <0f> 0b 49 8b 34 1e 48 89 ef e8 10 a2 17 00 eb df 48 8b 7d 00 e8 35
[ 2.014845] RSP: 0018:ffffa47ec33f3b10 EFLAGS: 00010202
[ 2.015279] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 2.015884] RDX: 0000000000000000 RSI: ffffa47ec33f3ca0 RDI: ffff98aa44f3fa80
[ 2.016377] RBP: ffff98aa44f3fbf0 R08: ffffa47ec33f3ba8 R09: 0000000000000000
[ 2.016942] R10: 0000000000000001 R11: 0000000000000000 R12: ffffa47ec33f3ca0
[ 2.017437] R13: 0000000000000008 R14: ffffa47ec33f3ba8 R15: 0000000000000000
[ 2.017972] FS: 000079ce006afa40(0000) GS:ffff98aade441000(0000) knlGS:0000000000000000
[ 2.018510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.018987] CR2: 000079ce03e74000 CR3: 000000010784f006 CR4: 0000000000372eb0
[ 2.019518] Call Trace:
[ 2.019729] <TASK>
[ 2.019901] truncate_inode_pages_range+0xd8/0x400
[ 2.020280] ? timerqueue_add+0x66/0xb0
[ 2.020574] ? get_nohz_timer_target+0x2a/0x140
[ 2.020904] ? timerqueue_add+0x66/0xb0
[ 2.021231] ? timerqueue_del+0x2e/0x50
[ 2.021646] ? __remove_hrtimer+0x39/0x90
[ 2.022017] ? srso_alias_untrain_ret+0x1/0x10
[ 2.022497] ? psi_group_change+0x136/0x350
[ 2.023046] ? _raw_spin_unlock+0xe/0x30
[ 2.023514] ? finish_task_switch.isra.0+0x8d/0x280
[ 2.024068] ? __schedule+0x532/0xbd0
[ 2.024551] fuse_evict_inode+0x29/0x190
[ 2.025131] evict+0x100/0x270
[ 2.025641] ? _atomic_dec_and_lock+0x39/0x50
[ 2.026316] ? __pfx_generic_delete_inode+0x10/0x10
[ 2.026843] __dentry_kill+0x71/0x180
[ 2.027335] dput+0xeb/0x1b0
[ 2.027725] __fput+0x136/0x2b0
[ 2.028054] __x64_sys_close+0x3d/0x80
[ 2.028469] do_syscall_64+0x6d/0x1b0
[ 2.028832] ? clear_bhb_loop+0x30/0x80
[ 2.029182] ? clear_bhb_loop+0x30/0x80
[ 2.029533] ? clear_bhb_loop+0x30/0x80
[ 2.029902] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 2.030423] RIP: 0033:0x79ce03d0d067
[ 2.030820] Code: b8 ff ff ff ff e9 3e ff ff ff 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 c3 a7 f8 ff
[ 2.032354] RSP: 002b:00007ffef0498948 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
[ 2.032939] RAX: ffffffffffffffda RBX: 00007ffef0498960 RCX: 000079ce03d0d067
[ 2.033612] RDX: 0000000000000003 RSI: 0000000000001000 RDI: 000000000000000d
[ 2.034289] RBP: 00007ffef0498a30 R08: 000000000000000d R09: 0000000000000000
[ 2.034944] R10: 00007ffef0498978 R11: 0000000000000246 R12: 0000000000000001
[ 2.035610] R13: 00007ffef0498960 R14: 000079ce03e09ce0 R15: 0000000000000003
[ 2.036301] </TASK>
[ 2.036532] ---[ end trace 0000000000000000 ]---
Link: https://lkml.kernel.org/r/20250621171507.3770-1-haiyuewa@163.com
Fixes: bde708f1a65d ("fs/dax: always remove DAX page-cache entries when breaking layouts")
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The "d_iname" member was replaced with "d_shortname.string" in the commit
referenced in the Fixes tag. This prevented the GDB script "lx-mount"
command to properly function:
(gdb) lx-mounts
mount super_block devname pathname fstype options
0xff11000002d21180 0xff11000002d24800 rootfs / rootfs rw 0 0
0xff11000002e18a80 0xff11000003713000 /dev/root / ext4 rw,relatime 0 0
Python Exception <class 'gdb.error'>: There is no member named d_iname.
Error occurred in Python: There is no member named d_iname.
Link: https://lkml.kernel.org/r/20250619225105.320729-1-florian.fainelli@broadcom.com
Fixes: 58cf9c383c5c ("dcache: back inline names with a struct-wrapped array of unsigned long")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
memcg_path_store() assigns a newly allocated memory buffer to
filter->memcg_path, without deallocating the previously allocated and
assigned memory buffer. As a result, users can leak kernel memory by
continuously writing a data to memcg_path DAMOS sysfs file. Fix the leak
by deallocating the previously set memory buffer.
Link: https://lkml.kernel.org/r/20250619183608.6647-2-sj@kernel.org
Fixes: 7ee161f18b5d ("mm/damon/sysfs-schemes: implement filter directory")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org> [6.3.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
percpu variable tag->counters
When loading a module, as long as the module has memory allocation
operations, kmemleak produces a false positive report that resembles the
following:
unreferenced object (percpu) 0x7dfd232a1650 (size 16):
comm "modprobe", pid 1301, jiffies 4294940249
hex dump (first 16 bytes on cpu 2):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
kmemleak_alloc_percpu+0xb4/0xd0
pcpu_alloc_noprof+0x700/0x1098
load_module+0xd4/0x348
codetag_module_init+0x20c/0x450
codetag_load_module+0x70/0xb8
load_module+0xef8/0x1608
init_module_from_file+0xec/0x158
idempotent_init_module+0x354/0x608
__arm64_sys_finit_module+0xbc/0x150
invoke_syscall+0xd4/0x258
el0_svc_common.constprop.0+0xb4/0x240
do_el0_svc+0x48/0x68
el0_svc+0x40/0xf8
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x1ac/0x1b0
This is because the module can only indirectly reference
alloc_tag_counters through the alloc_tag section, which misleads kmemleak.
However, we don't have a kmemleak ignore interface for percpu allocations
yet. So let's create one and invoke it for tag->counters.
[gehao@kylinos.cn: fix build error when CONFIG_DEBUG_KMEMLEAK=n, s/igonore/ignore/]
Link: https://lkml.kernel.org/r/20250620093102.2416767-1-hao.ge@linux.dev
Link: https://lkml.kernel.org/r/20250619183154.2122608-1-hao.ge@linux.dev
Fixes: 12ca42c23775 ("alloc_tag: allocate percpu counters for module tags dynamically")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Suren Baghdasaryan <surenb@google.com> [lib/alloc_tag.c]
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While testing null_blk with configfs, echo 0 > poll_queues will trigger
following panic:
BUG: kernel NULL pointer dereference, address: 0000000000000010
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 27 UID: 0 PID: 920 Comm: bash Not tainted 6.15.0-02023-gadbdb95c8696-dirty #1238 PREEMPT(undef)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014
RIP: 0010:__bitmap_or+0x48/0x70
Call Trace:
<TASK>
__group_cpus_evenly+0x822/0x8c0
group_cpus_evenly+0x2d9/0x490
blk_mq_map_queues+0x1e/0x110
null_map_queues+0xc9/0x170 [null_blk]
blk_mq_update_queue_map+0xdb/0x160
blk_mq_update_nr_hw_queues+0x22b/0x560
nullb_update_nr_hw_queues+0x71/0xf0 [null_blk]
nullb_device_poll_queues_store+0xa4/0x130 [null_blk]
configfs_write_iter+0x109/0x1d0
vfs_write+0x26e/0x6f0
ksys_write+0x79/0x180
__x64_sys_write+0x1d/0x30
x64_sys_call+0x45c4/0x45f0
do_syscall_64+0xa5/0x240
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Root cause is that numgrps is set to 0, and ZERO_SIZE_PTR is returned from
kcalloc(), and later ZERO_SIZE_PTR will be deferenced.
Fix the problem by checking numgrps first in group_cpus_evenly(), and
return NULL directly if numgrps is zero.
[yukuai3@huawei.com: also fix the non-SMP version]
Link: https://lkml.kernel.org/r/20250620010958.1265984-1-yukuai1@huaweicloud.com
Link: https://lkml.kernel.org/r/20250619132655.3318883-1-yukuai1@huaweicloud.com
Fixes: 6a6dcae8f486 ("blk-mq: Build default queue map via group_cpus_evenly()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: ErKun Yang <yangerkun@huawei.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "zhangyi (F)" <yi.zhang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In isolate_or_dissolve_huge_folio(), after acquiring the hugetlb_lock, it
is only for the purpose of obtaining the correct hstate, which is then
passed to alloc_and_dissolve_hugetlb_folio().
alloc_and_dissolve_hugetlb_folio() itself also acquires the hugetlb_lock.
We can have alloc_and_dissolve_hugetlb_folio() obtain the hstate by
itself, so that isolate_or_dissolve_huge_folio() no longer needs to
acquire the hugetlb_lock. In addition, we keep the folio_test_hugetlb()
check within isolate_or_dissolve_huge_folio(). By doing so, we can avoid
disrupting the normal path by vainly holding the hugetlb_lock.
replace_free_hugepage_folios() has the same issue, and we should address
it as well.
Addresses a possible performance problem which was added by the hotfix
113ed54ad276 ("mm/hugetlb: fix kernel NULL pointer dereference when
replacing free hugetlb folios").
Link: https://lkml.kernel.org/r/1748317010-16272-1-git-send-email-yangge1116@126.com
Fixes: 113ed54ad276 ("mm/hugetlb: fix kernel NULL pointer dereference when replacing free hugetlb folios")
Signed-off-by: Ge Yang <yangge1116@126.com>
Suggested-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are a number of files within memory management which appear to be
most suitably placed within the page allocation section of MAINTAINERS and
are otherwise unassigned, so place these there.
Link: https://lkml.kernel.org/r/20250618105953.67630-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Link: https://lkml.kernel.org/r/aFLubPfiO5hqfhCe@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add MAINTAINERS info for the oom-killer.
[akpm@linux-foundation.org: fix mhocko email address (SeongJae), add files (Lorenzo)]
[akpm@linux-foundation.org: fix ordering]
Link: https://lkml.kernel.org/r/20250617085819.355838-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
is_zero_pfn() does not work for the huge zero folio. Fix it by using
is_huge_zero_pmd().
This can cause the PAGEMAP_SCAN ioctl against /proc/pid/pagemap to
present pages as PAGE_IS_PRESENT rather than as PAGE_IS_PFNZERO.
Found by code inspection.
Link: https://lkml.kernel.org/r/20250617143532.2375383-1-david@redhat.com
Fixes: 52526ca7fdb9 ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Jakub Kicinski says:
====================
netlink: specs: enforce strict naming of properties
I got annoyed once again by the name properties in the ethtool spec
which use underscore instead of dash. I previously assumed that there
is a lot of such properties in the specs so fixing them now would
be near impossible. On a closer look, however, I only found 22
(rough grep suggests we have ~4.8k names in the specs, so bad ones
are just 0.46%).
Add a regex to the JSON schema to enforce the naming, fix the few
bad names. I was hoping we could start enforcing this from newer
families, but there's no correlation between the protocol and the
number of errors. If anything classic netlink has more recently
added specs so it has fewer errors.
The regex is just for name properties which will end up visible
to the user (in Python or YNL CLI). I left the c-name properties
alone, those don't matter as much. C codegen rewrites them, anyway.
I'm not updating the spec for genetlink-c. Looks like it has no
users, new families use genetlink, all old ones need genetlink-legacy.
If these patches are merged I will remove genetlink-c completely
in net-next.
====================
Link: https://patch.msgid.link/20250624211002.3475021-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a regexp to make sure all names which may end up being visible
to the user consist of lower case characters, numbers and dashes.
Underscores keep sneaking into the specs, which is not visible
in the C code but makes the Python and alike inconsistent.
Note that starting with a number is okay, as in C the full
name will include the family name.
For legacy families we can't enforce the naming in the family
name or the multicast group names, as these are part of the
binary uAPI of the kernel.
For classic netlink we need to allow capital letters in names
of struct members. TC has some structs with capitalized members.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: a1bcfde83669 ("doc/netlink/specs: Add a spec for tc")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: b2f63d904e72 ("doc/netlink: Add spec for rt link messages")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: bc8aeb2045e2 ("Documentation: netlink: add a YAML spec for mptcp")
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250624211002.3475021-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 93b230b549bc ("netlink: specs: add ynl spec for ovs_flow")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20250624211002.3475021-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 429ac6211494 ("devlink: define enum for attr types of dynamic attributes")
Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML")
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen replaces special chars in names)
but gives more uniform naming in Python.
Fixes: 13e59344fb9d ("net: ethtool: add support for symmetric-xor RSS hash")
Fixes: 46fb3ba95b93 ("ethtool: Add an interface for flashing transceiver modules' firmware")
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 4eb77b4ecd3c ("netlink: add a proto specification for FOU")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 13727f85b49b ("NFSD: introduce netlink stubs")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250624211002.3475021-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
enetc_hw.h provides two versions of _enetc_rd_reg64.
One which simply calls ioread64() when available.
And another that composes the 64-bit result from ioread32() calls.
In the second case the code appears to assume that each ioread32() call
returns a little-endian value. However both the shift and logical or
used to compose the return value would not work correctly on big endian
systems if this were the case. Moreover, this is inconsistent with the
first case where the return value of ioread64() is assumed to be in host
byte order.
It appears that the correct approach is for both versions to treat the
return value of ioread*() functions as being in host byte order. And
this patch corrects the ioread32()-based version to do so.
This is a bug but would only manifest on big endian systems
that make use of the ioread32-based implementation of _enetc_rd_reg64.
While all in-tree users of this driver are little endian and
make use of the ioread64-based implementation of _enetc_rd_reg64.
Thus, no in-tree user of this driver is affected by this bug.
Flagged by Sparse.
Compile tested only.
Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics")
Closes: https://lore.kernel.org/all/AM9PR04MB850500D3FC24FE23DEFCEA158879A@AM9PR04MB8505.eurprd04.prod.outlook.com/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250624-etnetc-le-v1-1-a73a95d96e4e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DMA map functions can fail and should be tested for errors.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250624064148.12815-3-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The below commit that updated BPF_MAP_TYPE_LRU_HASH free target,
also updated tools/testing/selftests/bpf/test_lru_map to match.
But that missed one case that passes with 4 cores, but fails at
higher cpu counts.
Update test_lru_sanity3 to also adjust its expectation of target_free.
This time tested with 1, 4, 16, 64 and 384 cpu count.
Fixes: d4adf1c9ee77 ("bpf: Adjust free target to avoid global starvation of LRU map")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20250625210412.2732970-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If an error occurs after calling mux_state_select(), mux_state_deselect()
should be called as already done in the remove function.
Fixes: b6ef830c60b6 ("i2c: omap: Add support for setting mux")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/998542981b6d2435c057dd8b9fe71743927babab.1749913149.git.christophe.jaillet@wanadoo.fr
|
|
Use adapater->name inplace of adapter->owner->name to fix
build issues when CONFIG_MODULES is not defined.
Fixes: 90b85567e457 ("platform/x86: Add AMD ISP platform config for OV05C10")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/all/04577a46-9add-420c-b181-29bad582026d@infradead.org
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Requires: 942e1aece13e ("i2c: designware: Initialize adapter name only when not set"
Requires: c8dc57916973 ("i2c: amd-isp: Initialize unique adapter name")
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250609155601.1477055-4-pratap.nirujogi@amd.com
|
|
Initialize unique name for amdisp i2c adapter, which is used
in the platform driver to detect the matching adapter for
i2c_client creation.
Add definition of amdisp i2c adapter name in a new header file
(include/linux/soc/amd/isp4_misc.h) as it is referred in different
driver modules.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250609155601.1477055-3-pratap.nirujogi@amd.com
|
|
Check if the adapter name is already set in the driver prior to
initializing with generic name in i2c_dw_probe_master(). This
check allows to retain the unique adapter name driver has
initialized, which platform driver can use to distinguish it
from other i2c designware adapters.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250609155601.1477055-2-pratap.nirujogi@amd.com
|
|
This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.
Fixes: e8c76eed2ecd ("i2c: New i2c-tiny-usb bus driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: <stable@vger.kernel.org> # v2.6.22+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250522064349.3823-2-wsa+renesas@sang-engineering.com
|
|
This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.
Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250522064234.3721-2-wsa+renesas@sang-engineering.com
|
|
Acknowledge the byte count submitted by the target.
When I2C_SMBUS_BLOCK_DATA read operation is executed by
i2c_smbus_xfer_emulated(), the length of the second (read) message is set
to 1. Length of the block is supposed to be obtained from the target by the
underlying bus driver.
The i2c_imx_isr_read() function should emit the acknowledge on i2c bus
after reading the first byte (i.e., byte count) while processing such
message (as defined in Section 6.5.7 of System Management Bus
Specification [1]). Without this acknowledge, the target does not submit
subsequent bytes and the controller only reads 0xff's.
In addition, store the length of block data obtained from the target in
the buffer provided by i2c_smbus_xfer_emulated() - otherwise the first
byte of actual data is erroneously interpreted as length of the data
block.
[1] https://smbus.org/specs/SMBus_3_3_20240512.pdf
Fixes: 5f5c2d4579ca ("i2c: imx: prevent rescheduling in non dma mode")
Signed-off-by: Lukasz Kucharczyk <lukasz.kucharczyk@leica-geosystems.com>
Cc: <stable@vger.kernel.org> # v6.13+
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Stefan Eichenberger <eichest@gmail.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250520122252.1475403-1-lukasz.kucharczyk@leica-geosystems.com
|
|
The `name` field in `obj->externs` points into the BTF data at initial
open time. However, some functions may invalidate this after opening and
before loading (e.g. `bpf_map__set_value_size`), which results in
pointers into freed memory and undefined behavior.
The simplest solution is to simply `strdup` these strings, similar to
the `essent_name`, and free them at the same time.
In order to test this path, the `global_map_resize` BPF selftest is
modified slightly to ensure the presence of an extern, which causes this
test to fail prior to the fix. Given there isn't an obvious API or error
to test against, I opted to add this to the existing test as an aspect
of the resizing feature rather than duplicate the test.
Fixes: 9d0a23313b1a ("libbpf: Add capability for resizing datasec maps")
Signed-off-by: Adin Scannell <amscanne@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250625050215.2777374-1-amscanne@meta.com
|
|
cxl_find_rec_dram() is used to find a DRAM event record based on the
inputted attributes. Different repair_type of the inputted attributes
will check the DRAM event record in different ways.
When EDAC driver is performing a memory rank sparing, it should use
CXL_RANK_SPARING rather than CXL_BANK_SPARING as repair_type for DRAM
event record checking.
Fixes: 588ca944c277 ("cxl/edac: Add CXL memory device memory sparing control feature")
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Link: https://patch.msgid.link/20250620052924.138892-1-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One fix for a runtime PM underflow when removing the Cadence QuadSPI
driver"
* tag 'spi-fix-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-cadence-quadspi: Fix pm runtime unbalance
|
|
The generate '[FAILED TO PARSE]' strings in trace-cmd report output like this:
rm-5298 [001] 6084.533748493: smb3_exit_err: [FAILED TO PARSE] xid=972 func_name=cifs_rmdir rc=-39
rm-5298 [001] 6084.533959234: smb3_enter: [FAILED TO PARSE] xid=973 func_name=cifs_closedir
rm-5298 [001] 6084.533967630: smb3_close_enter: [FAILED TO PARSE] xid=973 fid=94489281833 tid=1 sesid=96758029877361
rm-5298 [001] 6084.534004008: smb3_cmd_enter: [FAILED TO PARSE] tid=1 sesid=96758029877361 cmd=6 mid=566
rm-5298 [001] 6084.552248232: smb3_cmd_done: [FAILED TO PARSE] tid=1 sesid=96758029877361 cmd=6 mid=566
rm-5298 [001] 6084.552280542: smb3_close_done: [FAILED TO PARSE] xid=973 fid=94489281833 tid=1 sesid=96758029877361
rm-5298 [001] 6084.552316034: smb3_exit_done: [FAILED TO PARSE] xid=973 func_name=cifs_closedir
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes all in drivers.
ufs and megaraid_sas are small and obvious.
The large diffstat in fnic comes from two pieces: the addition of
quite a bit of logging (no change to function) and the reworking of
the timeout allocation path for the two conditions that can occur
simultaneously to prevent reusing the same abort frame and then both
trying to free it"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fnic: Fix missing DMA mapping error in fnic_send_frame()
scsi: fnic: Set appropriate logging level for log message
scsi: fnic: Add and improve logs in FDMI and FDMI ABTS paths
scsi: fnic: Turn off FDMI ACTIVE flags on link down
scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out
scsi: ufs: core: Fix clk scaling to be conditional in reset and restore
scsi: megaraid_sas: Fix invalid node index
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Johannes Berg:
- fix FP registers in seccomp mode
- prevent duplicate devices in VFIO support
- don't ignore errors in UBD thread start
- reduce stack use with clang 19
* tag 'uml-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: vector: Reduce stack usage in vector_eth_configure()
um: Use correct data source in fpregs_legacy_set()
um: vfio: Prevent duplicate device assignments
um: ubd: Add missing error check in start_io_thread()
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few fixes:
- iwlegacy: work around large stack with clang/kasan
- mac80211: fix integer overflow
- mac80211: fix link struct init vs. RCU publish
- iwlwifi: fix warning on IFF_UP
* tag 'wireless-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: finish link init before RCU publish
wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version
wifi: mac80211: fix beacon interval calculation overflow
wifi: iwlegacy: work around excessive stack usage on clang/kasan
====================
Link: https://patch.msgid.link/20250625115433.41381-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A bigger array of vecs could've been allocated, but
io_ring_buffers_peek() still decided to cap the mapped range depending
on how much data was available. Hence don't rely on the segment count
to know if the request should be marked as needing cleanup, always
check upfront if the iov array is different than the fast_iov array.
Fixes: 26ec15e4b0c1 ("io_uring/kbuf: don't truncate end buffer for multiple buffer peeks")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
transmit all data
We should not send smbdirect_data_transfer messages larger than
the negotiated max_send_size, typically 1364 bytes, which means
24 bytes of the smbdirect_data_transfer header + 1340 payload bytes.
This happened when doing an SMB2 write with more than 1340 bytes
(which is done inline as it's below rdma_readwrite_threshold).
It means the peer resets the connection.
When testing between cifs.ko and ksmbd.ko something like this
is logged:
client:
CIFS: VFS: RDMA transport re-established
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
CIFS: VFS: \\carina Send error in SessSetup = -11
smb2_reconnect: 12 callbacks suppressed
CIFS: VFS: reconnect tcon failed rc = -11
CIFS: VFS: reconnect tcon failed rc = -11
CIFS: VFS: reconnect tcon failed rc = -11
CIFS: VFS: SMB: Zero rsize calculated, using minimum value 65536
and:
CIFS: VFS: RDMA transport re-established
siw: got TERMINATE. layer 1, type 2, code 2
CIFS: VFS: smbd_recv:1894 disconnected
siw: got TERMINATE. layer 1, type 2, code 2
The ksmbd dmesg is showing things like:
smb_direct: Recv error. status='local length error (1)' opcode=128
smb_direct: disconnected
smb_direct: Recv error. status='local length error (1)' opcode=128
ksmbd: smb_direct: disconnected
ksmbd: sock_read failed: -107
As smbd_post_send_iter() limits the transmitted number of bytes
we need loop over it in order to transmit the whole iter.
Reviewed-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Meetakshi Setiya <msetiya@microsoft.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: <stable+noautosel@kernel.org> # sp->max_send_size should be info->max_send_size in backports
Fixes: 3d78fe73fa12 ("cifs: Build the RDMA SGE list directly from an iterator")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
By default, HPD was disabled on SN65DSI86 bridge. When the driver was
added (commit "a095f15c00e27"), the HPD_DISABLE bit was set in pre-enable
call which was moved to other function calls subsequently.
Later on, commit "c312b0df3b13" added detect utility for DP mode. But with
HPD_DISABLE bit set, all the HPD events are disabled[0] and the debounced
state always return 1 (always connected state).
Set HPD_DISABLE bit conditionally based on display sink's connector type.
Since the HPD_STATE is reflected correctly only after waiting for debounce
time (~100-400ms) and adding this delay in detect() is not feasible
owing to the performace impact (glitches and frame drop), remove runtime
calls in detect() and add hpd_enable()/disable() bridge hooks with runtime
calls, to detect hpd properly without any delay.
[0]: <https://www.ti.com/lit/gpn/SN65DSI86> (Pg. 32)
Fixes: c312b0df3b13 ("drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP")
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250624044835.165708-1-j-choudhary@ti.com
|
|
Each Chip-Select (CS) of a Unified Memory Controller (UMC) on AMD Zen-based
SOCs has an Address Mask and a Secondary Address Mask register associated with
it. The amd64_edac module logs DIMM sizes on a per-UMC per-CS granularity
during init using these two registers.
Currently, the module primarily considers only the Address Mask register for
computing DIMM sizes. The Secondary Address Mask register is only considered
for odd CS. Additionally, if it has been considered, the Address Mask register
is ignored altogether for that CS. For power-of-two DIMMs i.e. DIMMs whose
total capacity is a power of two (32GB, 64GB, etc), this is not an issue
since only the Address Mask register is used.
For non-power-of-two DIMMs i.e., DIMMs whose total capacity is not a power of
two (48GB, 96GB, etc), however, the Secondary Address Mask register is used
in conjunction with the Address Mask register. However, since the module only
considers either of the two registers for a CS, the size computed by the
module is incorrect. The Secondary Address Mask register is not considered for
even CS, and the Address Mask register is not considered for odd CS.
Introduce a new helper function so that both Address Mask and Secondary
Address Mask registers are considered, when valid, for computing DIMM sizes.
Furthermore, also rename some variables for greater clarity.
Fixes: 81f5090db843 ("EDAC/amd64: Support asymmetric dual-rank DIMMs")
Closes: https://lore.kernel.org/dbec22b6-00f2-498b-b70d-ab6f8a5ec87e@natrix.lt
Reported-by: Žilvinas Žaltiena <zilvinas@natrix.lt>
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Žilvinas Žaltiena <zilvinas@natrix.lt>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250529205013.403450-1-avadhut.naik@amd.com
|
|
Replace the return statement with setting ret = -EINVAL and jumping to
the err label to ensure resources are released via io_release_dmabuf.
Fixes: a5c98e942457 ("io_uring/zcrx: dmabuf backed zerocopy receive")
Signed-off-by: Penglei Jiang <superman.xpt@gmail.com>
Link: https://lore.kernel.org/r/20250625102703.68336-1-superman.xpt@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ASUS store the board name in DMI_PRODUCT_NAME rather than
DMI_PRODUCT_VERSION. (Apparently it is only Lenovo that stores the
model-name in DMI_PRODUCT_VERSION.)
Use the correct DMI identifier, DMI_PRODUCT_NAME, to match the
ASUSPRO-D840SA board, such that the quirk actually gets applied.
Cc: stable@vger.kernel.org
Reported-by: Andy Yang <andyybtc79@gmail.com>
Tested-by: Andy Yang <andyybtc79@gmail.com>
Closes: https://lore.kernel.org/linux-ide/aFb3wXAwJSSJUB7o@ryzen/
Fixes: b5acc3628898 ("ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard")
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250624074029.963028-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
iwlwifi-fixes: fix failure in interface up
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When compiling with clang (19.1.7), initializing *vp using a compound
literal may result in excessive stack usage. Fix it by initializing the
required fields of *vp individually.
Without this patch:
$ objdump -d arch/um/drivers/vector_kern.o | ./scripts/checkstack.pl x86_64 0
...
0x0000000000000540 vector_eth_configure [vector_kern.o]:1472
...
With this patch:
$ objdump -d arch/um/drivers/vector_kern.o | ./scripts/checkstack.pl x86_64 0
...
0x0000000000000540 vector_eth_configure [vector_kern.o]:208
...
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506221017.WtB7Usua-lkp@intel.com/
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250623110829.314864-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Read from the buffer pointed to by 'from' instead of '&buf', as
'buf' contains no valid data when 'ubuf' is NULL.
Fixes: b1e1bd2e6943 ("um: Add helper functions to get/set state for SECCOMP")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250606124428.148164-5-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Ensure devices are assigned only once. Reject subsequent requests
for duplicate assignments.
Fixes: a0e2cb6a9063 ("um: Add VFIO-based virtual PCI driver")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250606124428.148164-4-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The subsequent call to os_set_fd_block() overwrites the previous
return value. OR the two return values together to fix it.
Fixes: f88f0bdfc32f ("um: UBD Improvements")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250606124428.148164-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
An earlier patch fixed a build failure with clang, but I still see the
same problem with some configurations using gcc:
drivers/gpu/drm/i915/i915_pmu.c: In function 'config_mask':
include/linux/compiler_types.h:568:38: error: call to '__compiletime_assert_462' declared with attribute error: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1
drivers/gpu/drm/i915/i915_pmu.c:116:3: note: in expansion of macro 'BUILD_BUG_ON'
116 | BUILD_BUG_ON(bit >
As I understand it, the problem is that the function is not always fully
inlined, but the __builtin_constant_p() can still evaluate the argument
as being constant.
Marking it as __always_inline so far works for me in all configurations.
Fixes: a7137b1825b5 ("drm/i915/pmu: Fix build error with GCOV and AutoFDO enabled")
Fixes: a644fde77ff7 ("drm/i915/pmu: Change bitmask of enabled events to u32")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250620111824.3395007-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit ef69f9dd1cd7301cdf04ba326ed28152a3affcf6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The find_substream() call may return NULL, but the error path
dereferenced 'subs' unconditionally via dev_err(&subs->dev->dev, ...),
causing a NULL pointer dereference when subs is NULL.
Fix by switching to &uadev[idx].udev->dev which is always valid
in this context.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/86ac2939273ac853535049e60391c09d7688714e.1750755508.git.xiaopei01@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is no guaranteed alignment for user pointers. Don't use mask
trickery and adjust the offset by bv_offset.
Cc: stable@vger.kernel.org
Reported-by: David Hildenbrand <david@redhat.com>
Fixes: 9ef4cbbcb4ac3 ("io_uring: add infra for importing vectored reg buffers")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/io-uring/19530391f5c361a026ac9b401ff8e123bde55d98.1750771718.git.asml.silence@gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no guaranteed alignment for user pointers, however the
calculation of an offset of the first page into a folio after coalescing
uses some weird bit mask logic, get rid of it.
Cc: stable@vger.kernel.org
Reported-by: David Hildenbrand <david@redhat.com>
Fixes: a8edbb424b139 ("io_uring/rsrc: enable multi-hugepage buffer coalescing")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/io-uring/e387b4c78b33f231105a601d84eefd8301f57954.1750771718.git.asml.silence@gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
syzbot complains about an unmapping failure:
[ 108.070381][ T14] kernel BUG at mm/gup.c:71!
[ 108.070502][ T14] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 108.123672][ T14] Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250221-8.fc42 02/21/2025
[ 108.127458][ T14] Workqueue: iou_exit io_ring_exit_work
[ 108.174205][ T14] Call trace:
[ 108.175649][ T14] sanity_check_pinned_pages+0x7cc/0x7d0 (P)
[ 108.178138][ T14] unpin_user_page+0x80/0x10c
[ 108.180189][ T14] io_release_ubuf+0x84/0xf8
[ 108.182196][ T14] io_free_rsrc_node+0x250/0x57c
[ 108.184345][ T14] io_rsrc_data_free+0x148/0x298
[ 108.186493][ T14] io_sqe_buffers_unregister+0x84/0xa0
[ 108.188991][ T14] io_ring_ctx_free+0x48/0x480
[ 108.191057][ T14] io_ring_exit_work+0x764/0x7d8
[ 108.193207][ T14] process_one_work+0x7e8/0x155c
[ 108.195431][ T14] worker_thread+0x958/0xed8
[ 108.197561][ T14] kthread+0x5fc/0x75c
[ 108.199362][ T14] ret_from_fork+0x10/0x20
We can pin a tail page of a folio, but then io_uring will try to unpin
the head page of the folio. While it should be fine in terms of keeping
the page actually alive, mm folks say it's wrong and triggers a debug
warning. Use unpin_user_folio() instead of unpin_user_page*.
Cc: stable@vger.kernel.org
Debugged-by: David Hildenbrand <david@redhat.com>
Reported-by: syzbot+1d335893772467199ab6@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/683f1551.050a0220.55ceb.0017.GAE@google.com
Fixes: a8edbb424b139 ("io_uring/rsrc: enable multi-hugepage buffer coalescing")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/io-uring/a28b0f87339ac2acf14a645dad1e95bbcbf18acd.1750771718.git.asml.silence@gmail.com/
[axboe: adapt to current tree, massage commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If ublk_get_data() fails, -EIOCBQUEUED is returned and the current command
becomes ASYNC. And the only reason is that mapping data can't move on,
because of no enough pages or pending signal, then the current ublk request
has to be requeued.
Once the request need to be requeued, we have to setup `ublk_io` correctly,
including io->cmd and flags, otherwise the request may not be forwarded to
ublk server successfully.
Fixes: 9810362a57cb ("ublk: don't call ublk_dispatch_req() for NEED_GET_DATA")
Reported-by: Changhui Zhong <czhong@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAGVVp+VN9QcpHUz_0nasFf5q9i1gi8H8j-G-6mkBoqa3TyjRHA@mail.gmail.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Changhui Zhong <czhong@redhat.com>
Link: https://lore.kernel.org/r/20250624104121.859519-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_F_SUPPORT_ZERO_COPY has a very old comment describing the initial
idea for how zero-copy would be implemented. The actual implementation
added in commit 1f6540e2aabb ("ublk: zc register/unregister bvec") uses
io_uring registered buffers rather than shared memory mapping.
Remove the inaccurate remarks about mapping ublk request memory into the
ublk server's address space and requiring 4K block size. Replace them
with a description of the current zero-copy mechanism.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250621171015.354932-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When a C++ file compiled with -Wc++11-narrowing includes the UAPI header
linux/ublk_cmd.h, ublk_sqe_addr_to_auto_buf_reg()'s assignments of u64
values to u8, u16, and u32 fields result in compiler warnings. Add
explicit casts to the intended types to avoid these warnings. Drop the
unnecessary bitmasks.
Reported-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 99c1e4eb6a3f ("ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250621162842.337452-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't use same backing file for more than one ublk devices, and avoid
concurrent write on same file from more ublk disks.
Fixes: 8ccebc19ee3d ("selftests: ublk: support UBLK_F_AUTO_BUF_REG")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250623011934.741788-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_queue_cmd_list() dispatches the whole batch list by scheduling task
work via the tail request's io_uring_cmd, this way is fine even though
more than one io_ring_ctx are involved for this batch since it is just
one running context.
However, the task work handler ublk_cmd_list_tw_cb() takes `issue_flags`
of tail uring_cmd's io_ring_ctx for completing all commands. This way is
wrong if any uring_cmd is issued from different io_ring_ctx.
Fixes it by always building batch IOs from same io_ring_ctx and io task
because ublk_dispatch_req() does validate task context, and IO needs to
be aborted in case of running from fallback task work context.
For typical per-queue or per-io daemon implementation, this way shouldn't
make difference from performance viewpoint, because single io_ring_ctx is
taken in each daemon for normal use case.
Fixes: d796cea7b9f3 ("ublk: implement ->queue_rqs()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250625022554.883571-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We encountered following crash when testing a XDP_REDIRECT feature
in production:
[56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd
40f30).
[56251.601413] ------------[ cut here ]------------
[56251.611357] kernel BUG at lib/list_debug.c:29!
[56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6.
3 #1
[56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE
[56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025
[56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0
[56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48
89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89
[56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246
[56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000
[56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80
[56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18
[56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000
[56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40
[56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000
[56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0
[56251.831365] PKRU: 55555554
[56251.838653] Call Trace:
[56251.845560] <IRQ>
[56251.851943] cpu_map_enqueue.cold+0x5/0xa
[56251.860243] xdp_do_redirect+0x2d9/0x480
[56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en]
[56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en]
[56251.885665] ? cpu_max_write+0x1e/0x100
[56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en]
[56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en]
[56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.944250] __napi_poll+0x2b/0x160
[56251.951155] bpf_trampoline_6442548651+0x79/0x123
[56251.959262] __napi_poll+0x5/0x160
[56251.966037] net_rx_action+0x3d2/0x880
[56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.989262] ? __hrtimer_run_queues+0x162/0x2a0
[56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5
[56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5
[56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en]
[56252.019903] handle_softirqs+0xcf/0x270
[56252.026650] irq_exit_rcu+0x67/0x90
[56252.032933] common_interrupt+0x85/0xa0
[56252.039498] </IRQ>
[56252.044246] <TASK>
[56252.048935] asm_common_interrupt+0x26/0x40
[56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420
[56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae
01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29
[56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202
[56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000
[56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000
[56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e
[56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860
[56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000
[56252.146667] ? cpuidle_enter_state+0xab/0x420
[56252.153909] cpuidle_enter+0x2d/0x40
[56252.160360] do_idle+0x176/0x1c0
[56252.166456] cpu_startup_entry+0x29/0x30
[56252.173248] start_secondary+0xf7/0x100
[56252.179941] common_startup_64+0x13e/0x141
[56252.186886] </TASK>
From the crash dump, we found that the cpu_map_flush_list inside
redirect info is partially corrupted: its list_head->next points to
itself, but list_head->prev points to a valid list of unflushed bq
entries.
This turned out to be a result of missed XDP flush on redirect lists. By
digging in the actual source code, we found that
commit 7f0a168b0441 ("bnxt_en: Add completion ring pointer in TX and RX
ring structures") incorrectly overwrites the event mask for XDP_REDIRECT
in bnxt_rx_xdp. We can stably reproduce this crash by returning XDP_TX
and XDP_REDIRECT randomly for incoming packets in a naive XDP program.
Properly propagate the XDP_REDIRECT events back fixes the crash.
Fixes: a7559bc8c17c ("bnxt: support transmit and free of aggregation buffers")
Tested-by: Andrew Rzeznik <arzeznik@cloudflare.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Link: https://patch.msgid.link/aFl7jpCNzscumuN2@debian.debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"Another small SELinux patch to fix a problem seen by the dracut-ng
folks during early boot when SELinux is enabled, but the policy has
yet to be loaded"
* tag 'selinux-pr-20250624' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: change security_compute_sid to return the ssid or tsid on match
|
|
If a userspace application just include <linux/vm_sockets.h> will fail
to build with the following errors:
/usr/include/linux/vm_sockets.h:182:39: error: invalid application of ‘sizeof’ to incomplete type ‘struct sockaddr’
182 | unsigned char svm_zero[sizeof(struct sockaddr) -
| ^~~~~~
/usr/include/linux/vm_sockets.h:183:39: error: ‘sa_family_t’ undeclared here (not in a function)
183 | sizeof(sa_family_t) -
|
Include <sys/socket.h> for userspace (guarded by ifndef __KERNEL__)
where `struct sockaddr` and `sa_family_t` are defined.
We already do something similar in <linux/mptcp.h> and <linux/if.h>.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250623100053.40979-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
wait_on_allocator() emits debug info when we hang trying to allocate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Initialize DR7 by writing its architectural reset value to always set
bit 10, which is reserved to '1', when "clearing" DR7 so as not to
trigger unanticipated behavior if said bit is ever unreserved, e.g. as
a feature enabling flag with inverted polarity.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250620231504.2676902-3-xin%40zytor.com
|
|
Initialize DR6 by writing its architectural reset value to avoid
incorrectly zeroing DR6 to clear DR6.BLD at boot time, which leads
to a false bus lock detected warning.
The Intel SDM says:
1) Certain debug exceptions may clear bits 0-3 of DR6.
2) BLD induced #DB clears DR6.BLD and any other debug exception
doesn't modify DR6.BLD.
3) RTM induced #DB clears DR6.RTM and any other debug exception
sets DR6.RTM.
To avoid confusion in identifying debug exceptions, debug handlers
should set DR6.BLD and DR6.RTM, and clear other DR6 bits before
returning.
The DR6 architectural reset value 0xFFFF0FF0, already defined as
macro DR6_RESERVED, satisfies these requirements, so just use it to
reinitialize DR6 whenever needed.
Since clear_all_debug_regs() no longer zeros all debug registers,
rename it to initialize_debug_regs() to better reflect its current
behavior.
Since debug_read_clear_dr6() no longer clears DR6, rename it to
debug_read_reset_dr6() to better reflect its current behavior.
Fixes: ebb1064e7c2e9 ("x86/traps: Handle #DB for bus lock")
Reported-by: Sohil Mehta <sohil.mehta@intel.com>
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/lkml/06e68373-a92b-472e-8fd9-ba548119770c@intel.com/
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250620231504.2676902-2-xin%40zytor.com
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+d540192e763531d307ff@syzkaller.appspotmail.com
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prevent other bits of mailbox power limit from being overwritten with 0.
This issue was due to a missing read and modify of current power limit,
before setting a requested mailbox power limit, which is added in this
patch.
v2:
- Improve commit message. (Anshuman)
v3:
- Rebase.
- Rephrase commit message. (Riana)
- Add read-modify-write variant of xe_hwmon_pcode_write_power_limit()
i.e. xe_hwmon_pcode_rmw_power_limit(). (Badal)
- Use xe_hwmon_pcode_rmw_power_limit() to set mailbox power limits.
- Remove xe_hwmon_pcode_write_power_limit() as all mailbox power limits
writes use xe_hwmon_pcode_rmw_power_limit() only.
v4:
- Use PWR_LIM in place of (PWR_LIM_EN | PWR_LIM_VAL) wherever
applicable. (Riana)
Fixes: 25a2aa779fc3 ("drm/xe/hwmon: Add support to manage power limits though mailbox")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://lore.kernel.org/r/20250617120030.612819-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8aa7306631f088881759398972d503757cf0c901)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Add check for the return value of alloc_ordered_workqueue()
in xe_display_create() to catch potential exception.
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/4ee1b0e5d1626ce1dde2e82af05c2edaed50c3aa.1747397638.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 5b62d63395d5b7d4094e7cd380bccae4b25415cb)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Having PM put sync in remove function is causing PM underflow during
remove operation. This is caused by the function, runtime_pm_get_sync,
not being called anywhere during the op. Ensure that calls to
pm_runtime_enable()/pm_runtime_disable() and
pm_runtime_get_sync()/pm_runtime_put_sync() match.
echo 108d2000.spi > /sys/bus/platform/drivers/cadence-qspi/unbind
[ 49.644256] Deleting MTD partitions on "108d2000.spi.0":
[ 49.649575] Deleting u-boot MTD partition
[ 49.684087] Deleting root MTD partition
[ 49.724188] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
Continuous bind/unbind will result in an "Unbalanced pm_runtime_enable" error.
Subsequent unbind attempts will return a "No such device" error, while bind
attempts will return a "Resource temporarily unavailable" error.
[ 47.592434] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 49.592233] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128)
[ 53.232309] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 55.828550] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128)
[ 57.940627] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 59.912490] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128)
[ 61.876243] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 61.883000] platform 108d2000.spi: Unbalanced pm_runtime_enable!
[ 532.012270] cadence-qspi 108d2000.spi: probe with driver cadence-qspi failed1
Also, change clk_disable_unprepare() to clk_disable() since continuous
bind and unbind operations will trigger a warning indicating that the clock is
already unprepared.
Fixes: 4892b374c9b7 ("mtd: spi-nor: cadence-quadspi: Add runtime PM support")
cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/4e7a4b8aba300e629b45a04f90bddf665fbdb335.1749601877.git.khairul.anuar.romli@altera.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sof_pdata->tplg_filename can have address allocated by kstrdup()
and can be overwritten. Memory leak was detected with kmemleak:
unreferenced object 0xffff88812391ff60 (size 16):
comm "kworker/4:1", pid 161, jiffies 4294802931
hex dump (first 16 bytes):
73 6f 66 2d 68 64 61 2d 67 65 6e 65 72 69 63 00 sof-hda-generic.
backtrace (crc 4bf1675c):
__kmalloc_node_track_caller_noprof+0x49c/0x6b0
kstrdup+0x46/0xc0
hda_machine_select.cold+0x1de/0x12cf [snd_sof_intel_hda_generic]
sof_init_environment+0x16f/0xb50 [snd_sof]
sof_probe_continue+0x45/0x7c0 [snd_sof]
sof_probe_work+0x1e/0x40 [snd_sof]
process_one_work+0x894/0x14b0
worker_thread+0x5e5/0xfb0
kthread+0x39d/0x760
ret_from_fork+0x31/0x70
ret_from_fork_asm+0x1a/0x30
Signed-off-by: Tamura Dai <kirinode0@gmail.com>
Link: https://patch.msgid.link/20250615235548.8591-1-kirinode0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When EDID is retrieved via drm_edid_raw(), it doesn't guarantee to
return proper EDID bytes the caller wants: it may be either NULL (that
leads to an Oops) or with too long bytes over the fixed size raw_edid
array (that may lead to memory corruption). The latter was reported
actually when connected with a bad adapter.
Add sanity checks for drm_edid_raw() to address the above corner
cases, and return EDID_BAD_INPUT accordingly.
Fixes: 48edb2a4256e ("drm/amd/display: switch amdgpu_dm_connector to use struct drm_edid")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1236415
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 648d3f4d209725d51900d6a3ed46b7b600140cdf)
Cc: stable@vger.kernel.org
|
|
[Why]
commit 16dc8bc27c2a ("drm/amd/display: Export full brightness range to
userspace") adjusted the brightness range to scale to larger values, but
missed updating AMDGPU_MAX_BL_LEVEL which is needed to make sure that
scaling works properly with custom brightness curves.
[How]
As the change for max brightness of 0xFFFF only applies to devices
supporting DC, use existing DC define MAX_BACKLIGHT_LEVEL.
Fixes: 16dc8bc27c2a ("drm/amd/display: Export full brightness range to userspace")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250623171114.1156451-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5b852044eb0d3e1f1c946d32e05fcb068e0a20a0)
Cc: stable@vger.kernel.org
|
|
SDMA 7.0.0/1: 7836028
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8c011408ed842dfccdd50a90a9cf6bccdb85cc0e)
|
|
SDMA 6.0.0 version 24
SDMA 6.0.2 version 21
SDMA 6.0.3 version 25
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e8cca30d8b34f1c4101c237914c53068d4a55e73)
|
|
commit 017fbb6690c2 ("drm/amdgpu/discovery: check ip_discovery fw file
available") added support for reading an amdgpu IP discovery bin file
for some specific products. If it's not found then it will fallback to
hardcoded values. However if it's not found there is also a lot of noise
about missing files and errors.
Adjust the error handling to decrease most messages to DEBUG and to show
users less about missing files.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4312
Tested-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Fixes: 017fbb6690c2 ("drm/amdgpu/discovery: check ip_discovery fw file available")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250617183052.1692059-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 49f1f9f6c3c9febf8ba93f94a8d9c8d03e1ea0a1)
|
|
Seems some older MES firmware versions do not properly support
this packet. Add back some the compatibility checks.
v2: switch to fw version check (Shaoyun)
Fixes: f81cd793119e ("drm/amd/amdgpu: Fix MES init sequence")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4295
Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed-by: shaoyun.liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0180e0a5dd5c6ff118043ee42dbbbddaf881f283)
Cc: stable@vger.kernel.org
|
|
Enable the cleaner shader for other GFX9.x series of GPUs to provide
data isolation between GPU workloads. The cleaner shader is responsible
for clearing the Local Data Store (LDS), Vector General Purpose
Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which
helps prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX9.x GPUs, previously
available for GFX9.4.2. It enhances security by clearing GPU memory
between processes and maintains a consistent GPU state across KGD and
KFD workloads.
Cc: Manu Rastogi <manu.rastogi@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99808926d0ea6234a89e35240a7cb088368de9e1)
|
|
The 8250 binding before converting to json-schema states,
- clock-frequency : the input clock frequency for the UART
or
- clocks phandle to refer to the clk used as per Documentation/devicetree
for clock-related properties, where "or" indicates these properties
shouldn't exist at the same time.
Additionally, the behavior of Linux's driver is strange when both clocks
and clock-frequency are specified: it ignores clocks and obtains the
frequency from clock-frequency, left the specified clocks unclaimed. It
may even be disabled, which is undesired most of the time.
But "anyOf" doesn't prevent these two properties from coexisting, as it
considers the object valid as long as there's at LEAST one match.
Let's switch to "oneOf" and disallows the other property if one exists,
precisely matching the original binding and avoiding future confusion on
the driver's behavior.
Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema")
Cc: stable <stable@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250623093445.62327-1-ziyao@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 7a637784d517 ("serial: imx: reduce RX interrupt frequency")
introduced a regression on the i.MX6UL EVK board. The issue can be
reproduced with the following steps:
- Open vi on the board.
- Paste a text file (~150 characters).
- Save the file, then repeat the process.
- Compare the sha256sum of the saved files.
The checksums do not match due to missing characters or entire lines.
Fix this by restoring the RXTL value to 1 when the UART is used as a
console.
This ensures timely RX interrupts and reliable data reception in console
mode.
With this change, pasted content is saved correctly, and checksums are
always consistent.
Cc: stable <stable@kernel.org>
Fixes: 7a637784d517 ("serial: imx: reduce RX interrupt frequency")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250619114617.2791939-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Once want_mount_setattr() has returned a positive, it does require
finish_mount_kattr() to release ->mnt_userns. Failing do_mount_setattr()
does not change that.
As the result, we can end up leaking userns and possibly mnt_idmap as
well.
Fixes: c4a16820d901 ("fs: add open_tree_attr()")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Since the link/conf pointers can be accessed without any
protection other than RCU, make sure the data is actually
set up before publishing the structures.
Fixes: b2e8434f1829 ("wifi: mac80211: set up/tear down client vif links properly")
Link: https://patch.msgid.link/20250624130749.9a308b713c74.I4a80f5eead112a38730939ea591d2e275c721256@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix the boost gain calculation error in rt721_sdca_set_gain_get.
This patch is specific for "FU33 Boost Volume".
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/1b18fcde41c64d6fa85451d523c0434a@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- L2CAP: Fix L2CAP MTU negotiation
- hci_core: Fix use-after-free in vhci_flush()
- btintel_pcie: Fix potential race condition in firmware download
- hci_qca: fix unable to load the BT driver
* tag 'for-net-2025-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_core: Fix use-after-free in vhci_flush()
driver: bluetooth: hci_qca:fix unable to load the BT driver
Bluetooth: L2CAP: Fix L2CAP MTU negotiation
Bluetooth: btintel_pcie: Fix potential race condition in firmware download
====================
Link: https://patch.msgid.link/20250623165405.227619-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Unfortunately, FWs of some devices don't have the version of the
iwl_mac_config_cmd defined in the TLVs. We send 0 as the 'def argument
to iwl_fw_lookup_cmd_ver, so for such FWs, the return value will be 0,
leading to a warning, and to not sending the command.
Fix this by assuming that the default version is 1.
Fixes: 83f3ac2848b4 ("wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250624071427.2662621-1-miriam.rachel.korenblit@intel.com
|
|
When snd_soc_usb_find_priv_data() fails, return failure instead of
success. While we are at it also use direct returns at first few error
paths where there is no additional cleanup needed.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/Z_40qL4JnyjR4j0O@stanley.mountain/
Fixes: 326bbc348298 ("ALSA: usb-audio: qcom: Introduce QC USB SND offloading support")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20250623142639.2938056-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Kuniyuki Iwashima says:
====================
af_unix: Fix two OOB issues.
From: Kuniyuki Iwashima <kuniyu@google.com>
Recently, two issues are reported regarding MSG_OOB.
Patch 1 fixes issues that happen when multiple consumed OOB
skbs are placed consecutively in the recv queue.
Patch 2 fixes an inconsistent behaviour that close()ing a socket
with a consumed OOB skb at the head of the recv queue triggers
-ECONNRESET on the peer's recv().
v1: https://lore.kernel.org/netdev/20250618043453.281247-1-kuni1840@gmail.com/
====================
Link: https://patch.msgid.link/20250619041457.1132791-1-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A new function resetpair() calls close() for the receiver and checks
the return value from recv() on the initial sender side.
Now resetpair() is added to each test case and some additional test
cases.
Note that TCP sets -ECONNRESET to the consumed OOB, but we have decided
not to touch TCP MSG_OOB code in the past.
Before:
# RUN msg_oob.no_peek.ex_oob_ex_oob ...
# msg_oob.c:236:ex_oob_ex_oob:AF_UNIX :Connection reset by peer
# msg_oob.c:237:ex_oob_ex_oob:Expected:
# msg_oob.c:239:ex_oob_ex_oob:Expected ret[0] (-1) == expected_len (0)
# ex_oob_ex_oob: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ex_oob
not ok 14 msg_oob.no_peek.ex_oob_ex_oob
...
# FAILED: 36 / 48 tests passed.
# Totals: pass:36 fail:12 xfail:0 xpass:0 skip:0 error:0
After:
# RUN msg_oob.no_peek.ex_oob_ex_oob ...
# msg_oob.c:244:ex_oob_ex_oob:AF_UNIX :
# msg_oob.c:245:ex_oob_ex_oob:TCP :Connection reset by peer
# OK msg_oob.no_peek.ex_oob_ex_oob
ok 14 msg_oob.no_peek.ex_oob_ex_oob
...
# PASSED: 48 / 48 tests passed.
# Totals: pass:48 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250619041457.1132791-5-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Christian Brauner reported that even after MSG_OOB data is consumed,
calling close() on the receiver socket causes the peer's recv() to
return -ECONNRESET:
1. send() and recv() an OOB data.
>>> from socket import *
>>> s1, s2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> s1.send(b'x', MSG_OOB)
1
>>> s2.recv(1, MSG_OOB)
b'x'
2. close() for s2 sets ECONNRESET to s1->sk_err even though
s2 consumed the OOB data
>>> s2.close()
>>> s1.recv(10, MSG_DONTWAIT)
...
ConnectionResetError: [Errno 104] Connection reset by peer
Even after being consumed, the skb holding the OOB 1-byte data stays in
the recv queue to mark the OOB boundary and break recv() at that point.
This must be considered while close()ing a socket.
Let's skip the leading consumed OOB skb while checking the -ECONNRESET
condition in unix_release_sock().
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Reported-by: Christian Brauner <brauner@kernel.org>
Closes: https://lore.kernel.org/netdev/20250529-sinkt-abfeuern-e7b08200c6b0@brauner/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://patch.msgid.link/20250619041457.1132791-4-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Let's add a test case where consecutive concumed OOB skbs stay
at the head of the queue.
Without the previous patch, ioctl(SIOCATMARK) assertion fails.
Before:
# RUN msg_oob.no_peek.ex_oob_ex_oob_oob ...
# msg_oob.c:305:ex_oob_ex_oob_oob:Expected answ[0] (0) == oob_head (1)
# ex_oob_ex_oob_oob: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ex_oob_oob
not ok 12 msg_oob.no_peek.ex_oob_ex_oob_oob
After:
# RUN msg_oob.no_peek.ex_oob_ex_oob_oob ...
# OK msg_oob.no_peek.ex_oob_ex_oob_oob
ok 12 msg_oob.no_peek.ex_oob_ex_oob_oob
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250619041457.1132791-3-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jann Horn reported a use-after-free in unix_stream_read_generic().
The following sequences reproduce the issue:
$ python3
from socket import *
s1, s2 = socketpair(AF_UNIX, SOCK_STREAM)
s1.send(b'x', MSG_OOB)
s2.recv(1, MSG_OOB) # leave a consumed OOB skb
s1.send(b'y', MSG_OOB)
s2.recv(1, MSG_OOB) # leave a consumed OOB skb
s1.send(b'z', MSG_OOB)
s2.recv(1) # recv 'z' illegally
s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free)
Even though a user reads OOB data, the skb holding the data stays on
the recv queue to mark the OOB boundary and break the next recv().
After the last send() in the scenario above, the sk2's recv queue has
2 leading consumed OOB skbs and 1 real OOB skb.
Then, the following happens during the next recv() without MSG_OOB
1. unix_stream_read_generic() peeks the first consumed OOB skb
2. manage_oob() returns the next consumed OOB skb
3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb
4. unix_stream_read_generic() reads and frees the OOB skb
, and the last recv(MSG_OOB) triggers KASAN splat.
The 3. above occurs because of the SO_PEEK_OFF code, which does not
expect unix_skb_len(skb) to be 0, but this is true for such consumed
OOB skbs.
while (skip >= unix_skb_len(skb)) {
skip -= unix_skb_len(skb);
skb = skb_peek_next(skb, &sk->sk_receive_queue);
...
}
In addition to this use-after-free, there is another issue that
ioctl(SIOCATMARK) does not function properly with consecutive consumed
OOB skbs.
So, nothing good comes out of such a situation.
Instead of complicating manage_oob(), ioctl() handling, and the next
ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs,
let's not leave such consecutive OOB unnecessarily.
Now, while receiving an OOB skb in unix_stream_recv_urg(), if its
previous skb is a consumed OOB skb, it is freed.
[0]:
BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027)
Read of size 4 at addr ffff888106ef2904 by task python3/315
CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted 6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:409 mm/kasan/report.c:521)
kasan_report (mm/kasan/report.c:636)
unix_stream_read_actor (net/unix/af_unix.c:3027)
unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847)
unix_stream_recvmsg (net/unix/af_unix.c:3048)
sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20))
__sys_recvfrom (net/socket.c:2278)
__x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f8911fcea06
Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
RSP: 002b:00007fffdb0dccb0 EFLAGS: 00000202 ORIG_RAX: 000000000000002d
RAX: ffffffffffffffda RBX: 00007fffdb0dcdc8 RCX: 00007f8911fcea06
RDX: 0000000000000001 RSI: 00007f8911a5e060 RDI: 0000000000000006
RBP: 00007fffdb0dccd0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000202 R12: 00007f89119a7d20
R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 315:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1))
__kasan_slab_alloc (mm/kasan/common.c:348)
kmem_cache_alloc_node_noprof (./include/linux/kasan.h:250 mm/slub.c:4148 mm/slub.c:4197 mm/slub.c:4249)
__alloc_skb (net/core/skbuff.c:660 (discriminator 4))
alloc_skb_with_frags (./include/linux/skbuff.h:1336 net/core/skbuff.c:6668)
sock_alloc_send_pskb (net/core/sock.c:2993)
unix_stream_sendmsg (./include/net/sock.h:1847 net/unix/af_unix.c:2256 net/unix/af_unix.c:2418)
__sys_sendto (net/socket.c:712 (discriminator 20) net/socket.c:727 (discriminator 20) net/socket.c:2226 (discriminator 20))
__x64_sys_sendto (net/socket.c:2233 (discriminator 1) net/socket.c:2229 (discriminator 1) net/socket.c:2229 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Freed by task 315:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1))
kasan_save_free_info (mm/kasan/generic.c:579 (discriminator 1))
__kasan_slab_free (mm/kasan/common.c:271)
kmem_cache_free (mm/slub.c:4643 (discriminator 3) mm/slub.c:4745 (discriminator 3))
unix_stream_read_generic (net/unix/af_unix.c:3010)
unix_stream_recvmsg (net/unix/af_unix.c:3048)
sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20))
__sys_recvfrom (net/socket.c:2278)
__x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
The buggy address belongs to the object at ffff888106ef28c0
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 68 bytes inside of
freed 224-byte region [ffff888106ef28c0, ffff888106ef29a0)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888106ef3cc0 pfn:0x106ef2
head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x200000000000040(head|node=0|zone=2)
page_type: f5(slab)
raw: 0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004
raw: ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000
head: 0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004
head: ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000
head: 0200000000000001 ffffea00041bbc81 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888106ef2800: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
ffff888106ef2880: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888106ef2900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888106ef2980: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888106ef2a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Link: https://patch.msgid.link/20250619041457.1132791-2-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As we are converting from TU to usecs, a beacon interval of
100*1024 usecs will lead to integer wrapping. To fix change
to use a u32.
Fixes: 057d5f4ba1e4 ("mac80211: sync dtim_count to TSF")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250621123209.511796-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In some rare randconfig builds, I seem to trigger a bug in clang where
it unrolls a loop but then runs out of registers, which then get
spilled to the stack:
net/wireless/intel/iwlegacy/4965-rs.c:2262:1: error: stack frame size (1696) exceeds limit (1280) in 'il4965_rs_rate_init' [-Werror,-Wframe-larger-than]
This seems to be the same one I saw in the omapdrm driver, and there is
an easy workaround by not inlining the il4965_rs_rate_scale_clear_win
function.
Link: https://github.com/llvm/llvm-project/issues/143908
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20250620113946.3987160-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Jerome Marchand says:
====================
bpf: Specify access type of bpf_sysctl_get_name args
The second argument of bpf_sysctl_get_name() helper is a pointer to a
buffer that is being written to. However that isn't specify in the
prototype. Until commit 37cce22dbd51a ("bpf: verifier: Refactor helper
access type tracking") that mistake was hidden by the way the verifier
treated helper accesses. Since then, the verifier, working on wrong
infromation from the prototype, can make faulty optimization that
would had been caught by the test_sysctl selftests if it was run by
the CI.
The first patch fixes bpf_sysctl_get_name prototype.
The second patch converts the test_sysctl to prog_tests so that it
will be run by the CI and catch similar issues in the future.
Changes in v3:
- Use ASSERT* macro instead of CHECK_FAIL.
- Remove useless code.
Changes in v2:
- Replace ARG_PTR_TO_UNINIT_MEM by ARG_PTR_TO_MEM | MEM_WRITE.
- Converts test_sysctl to prog_tests.
====================
Link: https://patch.msgid.link/20250619140603.148942-1-jmarchan@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Convert test_sysctl test to prog_tests with minimal change to the
tests themselves.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250619140603.148942-3-jmarchan@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The second argument of bpf_sysctl_get_name() helper is a pointer to a
buffer that is being written to. However that isn't specify in the
prototype.
Until commit 37cce22dbd51a ("bpf: verifier: Refactor helper access
type tracking"), all helper accesses were considered as a possible
write access by the verifier, so no big harm was done. However, since
then, the verifier might make wrong asssumption about the content of
that address which might lead it to make faulty optimizations (such as
removing code that was wrongly labeled dead). This is what happens in
test_sysctl selftest to the tests related to sysctl_get_name.
Add MEM_WRITE flag the second argument of bpf_sysctl_get_name().
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250619140603.148942-2-jmarchan@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The bridge maintains a global list of ports behind which a multicast
router resides. The list is consulted during forwarding to ensure
multicast packets are forwarded to these ports even if the ports are not
member in the matching MDB entry.
When per-VLAN multicast snooping is enabled, the per-port multicast
context is disabled on each port and the port is removed from the global
router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 1
$ bridge -d mdb show | grep router
However, the port can be re-added to the global list even when per-VLAN
multicast snooping is enabled:
# ip link set dev dummy1 type bridge_slave mcast_router 0
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
Since commit 4b30ae9adb04 ("net: bridge: mcast: re-implement
br_multicast_{enable, disable}_port functions"), when per-VLAN multicast
snooping is enabled, multicast disablement on a port will disable the
per-{port, VLAN} multicast contexts and not the per-port one. As a
result, a port will remain in the global router port list even after it
is deleted. This will lead to a use-after-free [1] when the list is
traversed (when adding a new port to the list, for example):
# ip link del dev dummy1
# ip link add name dummy2 up master br1 type dummy
# ip link set dev dummy2 type bridge_slave mcast_router 2
Similarly, stale entries can also be found in the per-VLAN router port
list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN}
contexts are disabled on each port and the port is removed from the
per-VLAN router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1
# ip link add name dummy1 up master br1 type dummy
# bridge vlan add vid 2 dev dummy1
# bridge vlan global set vid 2 dev br1 mcast_snooping 1
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 0
$ bridge vlan global show dev br1 vid 2 | grep router
However, the port can be re-added to the per-VLAN list even when
per-VLAN multicast snooping is disabled:
# bridge vlan set vid 2 dev dummy1 mcast_router 0
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
When the VLAN is deleted from the port, the per-{port, VLAN} multicast
context will not be disabled since multicast snooping is not enabled
on the VLAN. As a result, the port will remain in the per-VLAN router
port list even after it is no longer member in the VLAN. This will lead
to a use-after-free [2] when the list is traversed (when adding a new
port to the list, for example):
# ip link add name dummy2 up master br1 type dummy
# bridge vlan add vid 2 dev dummy2
# bridge vlan del vid 2 dev dummy1
# bridge vlan set vid 2 dev dummy2 mcast_router 2
Fix these issues by removing the port from the relevant (global or
per-VLAN) router port list in br_multicast_port_ctx_deinit(). The
function is invoked during port deletion with the per-port multicast
context and during VLAN deletion with the per-{port, VLAN} multicast
context.
Note that deleting the multicast router timer is not enough as it only
takes care of the temporary multicast router states (1 or 3) and not the
permanent one (2).
[1]
BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560
Write of size 8 at addr ffff888004a67328 by task ip/384
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
br_multicast_add_router.part.0+0x3f1/0x560
br_multicast_set_port_router+0x74e/0xac0
br_setport+0xa55/0x1870
br_port_slave_changelink+0x95/0x120
__rtnl_newlink+0x5e8/0xa40
rtnl_newlink+0x627/0xb00
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x11f/0x350
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x124/0x1c0
do_syscall_64+0xbb/0x360
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
BUG: KASAN: slab-use-after-free in br_multicast_add_router.part.0+0x378/0x560
Read of size 8 at addr ffff888009f00840 by task bridge/391
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
br_multicast_add_router.part.0+0x378/0x560
br_multicast_set_port_router+0x6f9/0xac0
br_vlan_process_options+0x8b6/0x1430
br_vlan_rtm_process_one+0x605/0xa30
br_vlan_rtm_process+0x396/0x4c0
rtnetlink_rcv_msg+0x2f7/0xb70
netlink_rcv_skb+0x11f/0x350
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x124/0x1c0
do_syscall_64+0xbb/0x360
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 2796d846d74a ("net: bridge: vlan: convert mcast router global option to per-vlan entry")
Fixes: 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions")
Reported-by: syzbot+7bfa4b72c6a5da128d32@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/684c18bd.a00a0220.279073.000b.GAE@google.com/T/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250619182228.1656906-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change error values of `ionic_tx_map_single()` and `ionic_tx_map_frag()`
from 0 to `DMA_MAPPING_ERROR` to prevent collision with 0 as a valid
address.
This also fixes the use of `dma_mapping_error()` to test against 0 in
`ionic_xdp_post_frame()`
Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Fixes: 56e41ee12d2d ("ionic: better dma-map error handling")
Fixes: ac8813c0ab7d ("ionic: convert Rx queue buffers to use page_pool")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20250619094538.283723-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mailbox controller driver for the Microchip Inter-processor
Communication can be built as a module. It uses cpuid_to_hartid_map and
commit 4783ce32b080 ("riscv: export __cpuid_to_hartid_map") enables that
to work for SMP. However, cpuid_to_hartid_map uses boot_cpu_hartid on
non-SMP kernels and this driver can be useful in such configurations[1].
Export boot_cpu_hartid so the driver can be built as a module on non-SMP
kernels as well.
Link: https://lore.kernel.org/lkml/20250617-confess-reimburse-876101e099cb@spud/ [1]
Cc: stable@vger.kernel.org
Fixes: e4b1d67e7141 ("mailbox: add Microchip IPC support")
Signed-off-by: Klara Modin <klarasmodin@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250617125847.23829-1-klarasmodin@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
This reverts commit ad5643cf2f69 ("riscv: Define TASK_SIZE_MAX for
__access_ok()").
This commit changes TASK_SIZE_MAX to be LONG_MAX to optimize access_ok(),
because the previous TASK_SIZE_MAX (default to TASK_SIZE) requires some
computation.
The reasoning was that all user addresses are less than LONG_MAX, and all
kernel addresses are greater than LONG_MAX. Therefore access_ok() can
filter kernel addresses.
Addresses between TASK_SIZE and LONG_MAX are not valid user addresses, but
access_ok() let them pass. That was thought to be okay, because they are
not valid addresses at hardware level.
Unfortunately, one case is missed: get_user_pages_fast() happily accepts
addresses between TASK_SIZE and LONG_MAX. futex(), for instance, uses
get_user_pages_fast(). This causes the problem reported by Robert [1].
Therefore, revert this commit. TASK_SIZE_MAX is changed to the default:
TASK_SIZE.
This unfortunately reduces performance, because TASK_SIZE is more expensive
to compute compared to LONG_MAX. But correctness first, we can think about
optimization later, if required.
Reported-by: <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/linux-riscv/77605.1750245028@localhost/
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: ad5643cf2f69 ("riscv: Define TASK_SIZE_MAX for __access_ok()")
Link: https://lore.kernel.org/r/20250619155858.1249789-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
sparse reports the following warning:
arch/riscv/kernel/vendor_extensions/sifive.c:11:33: sparse: sparse: symbol 'riscv_isa_vendor_ext_sifive' was not declared. Should it be static?
So as this struct is only used in this file, make it static.
Fixes: 2d147d77ae6e ("riscv: Add SiFive xsfvqmaccdod and xsfvqmaccqoq vendor extensions")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505072100.TZlEp8h1-lkp@intel.com/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250620-dev-alex-fix_sparse_sifive_v1-v1-1-efa3a6f93846@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
access handling"
This reverts commit 61a74ad25462 ("riscv: misaligned: fix sleeping function
called during misaligned access handling"). The commit addresses a sleeping
in atomic context problem, but it is not the correct fix as explained by
Clément:
"Using nofault would lead to failure to read from user memory that is paged
out for instance. This is not really acceptable, we should handle user
misaligned access even at an address that would generate a page fault."
This bug has been properly fixed by commit 453805f0a28f ("riscv:
misaligned: enable IRQs while handling misaligned accesses").
Revert this improper fix.
Link: https://lore.kernel.org/linux-riscv/b779beed-e44e-4a5e-9551-4647682b0d21@rivosinc.com/
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: 61a74ad25462 ("riscv: misaligned: fix sleeping function called during misaligned access handling")
Link: https://lore.kernel.org/r/20250620110939.1642735-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
The bridge used in drm_connector_hdmi_audio_init() does not correctly
point to the required audio bridge, which lead to incorrect audio
configuration input.
Fixes: 231adeda9f67 ("drm/bridge-connector: hook DisplayPort audio support")
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250620011616.118-1-kernel@airkyi.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- dm-crypt: fix a crash on 32-bit machines
- dm-raid: replace "rdev" with correct loop variable name "r"
* tag 'for-6.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-raid: fix variable in journal device check
dm-crypt: Extend state buffer size in crypt_iv_lmk_one
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
- fix double-unlock introduced by the recent folio conversion
- fix stale page content beyond EOF complained by xfstests/generic/363
* tag 'f2fs-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: fix to zero post-eof page
f2fs: Fix __write_node_folio() conversion
|
|
This reverts commit 631b2af2f357 ("PCI/ACPI: Fix allocated memory release
on error in pci_acpi_scan_root()").
The reverted patch causes the 'ri->cfg' and 'root_ops' resources to be
released multiple times.
When acpi_pci_root_create() fails, these resources have already been
released internally by the __acpi_pci_root_release_info() function.
Releasing them again in pci_acpi_scan_root() leads to incorrect behavior
and potential memory issues.
We plan to resolve the issue using a more appropriate fix.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aEmdnuw715btq7Q5@stanley.mountain/
Signed-off-by: Zhe Qiao <qiaozhe@iscas.ac.cn>
Acked-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20250619072608.2075475-1-qiaozhe@iscas.ac.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
commit f1fce08e63fe ("netpoll: Eliminate redundant assignment") removed
the initialization of the UDP checksum, which was wrong and broke
netpoll IPv6 transmission due to bad checksumming.
udph->check needs to be set before calling csum_ipv6_magic().
Fixes: f1fce08e63fe ("netpoll: Eliminate redundant assignment")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250620-netpoll_fix-v1-1-f9f0b82bc059@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Fixes:
- fix invalid inode pointer dereferences during log replay
- fix a race between renames and directory logging
- fix shutting down delayed iput worker
- fix device byte accounting when dropping chunk
- in zoned mode, fix offset calculations for DUP profile when
conventional and sequential zones are used together
Regression fixes:
- fix possible double unlock of extent buffer tree (xarray
conversion)
- in zoned mode, fix extent buffer refcount when writing out extents
(xarray conversion)
Error handling fixes and updates:
- handle unexpected extent type when replaying log
- check and warn if there are remaining delayed inodes when putting a
root
- fix assertion when building free space tree
- handle csum tree error with mount option 'rescue=ibadroot'
Other:
- error message updates: add prefix to all scrub related messages,
include other information in messages"
* tag 'for-6.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix alloc_offset calculation for partly conventional block groups
btrfs: handle csum tree error with rescue=ibadroots correctly
btrfs: fix race between async reclaim worker and close_ctree()
btrfs: fix assertion when building free space tree
btrfs: don't silently ignore unexpected extent type when replaying log
btrfs: fix invalid inode pointer dereferences during log replay
btrfs: fix double unlock of buffer_tree xarray when releasing subpage eb
btrfs: update superblock's device bytes_used when dropping chunk
btrfs: fix a race between renames and directory logging
btrfs: scrub: add prefix for the error messages
btrfs: warn if leaking delayed_nodes in btrfs_put_root()
btrfs: fix delayed ref refcount leak in debug assertion
btrfs: include root in error message when unlinking inode
btrfs: don't drop a reference if btrfs_check_write_meta_pointer() fails
|
|
When btf_dump__new() fails to allocate memory for the internal hashmap
(btf_dump->type_names), it returns an error code. However, the cleanup
function btf_dump__free() does not check if btf_dump->type_names is NULL
before attempting to free it. This leads to a null pointer dereference
when btf_dump__free() is called on a btf_dump object.
Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250618011933.11423-1-chenyuan_fl@163.com
|
|
under it
If we are propagating across the userns boundary, we need to lock the
mounts added there. However, in case when something has already
been mounted there and we end up sliding a new tree under that,
the stuff that had been there before should not get locked.
IOW, lock_mnt_tree() should be called before we reparent the
preexisting tree on top of what we are adding.
Fixes: 3bd045cc9c4b ("separate copying and locking mount tree on cross-userns copies")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
collect_mounts() has several problems - one can't iterate over the results
directly, so it has to be done with callback passed to iterate_mounts();
it has an oopsable race with d_invalidate(); it creates temporary clones
of mounts invisibly for sync umount (IOW, you can have non-lazy umount
succeed leaving filesystem not mounted anywhere and yet still busy).
A saner approach is to give caller an array of struct path that would pin
every mount in a subtree, without cloning any mounts.
* collect_mounts()/drop_collected_mounts()/iterate_mounts() is gone
* collect_paths(where, preallocated, size) gives either ERR_PTR(-E...) or
a pointer to array of struct path, one for each chunk of tree visible under
'where' (i.e. the first element is a copy of where, followed by (mount,root)
for everything mounted under it - the same set collect_mounts() would give).
Unlike collect_mounts(), the mounts are *not* cloned - we just get pinning
references to the roots of subtrees in the caller's namespace.
Array is terminated by {NULL, NULL} struct path. If it fits into
preallocated array (on-stack, normally), that's where it goes; otherwise
it's allocated by kmalloc_array(). Passing 0 as size means that 'preallocated'
is ignored (and expected to be NULL).
* drop_collected_paths(paths, preallocated) is given the array returned
by an earlier call of collect_paths() and the preallocated array passed to that
call. All mount/dentry references are dropped and array is kfree'd if it's not
equal to 'preallocated'.
* instead of iterate_mounts(), users should just iterate over array
of struct path - nothing exotic is needed for that. Existing users (all in
audit_tree.c) are converted.
[folded a fix for braino reported by Venkat Rao Bagalkote <venkat88@linux.ibm.com>]
Fixes: 80b5dce8c59b0 ("vfs: Add a function to lazily unmount all mounts from any dentry")
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Otherwise, the following build error will happen for CONFIG_DEBUG_FS=n &&
CONFIG_PCIE_PTM=y:
drivers/pci/pcie/ptm.c:498:25: error: redefinition of 'pcie_ptm_create_debugfs'
498 | struct pci_ptm_debugfs *pcie_ptm_create_debugfs(struct device *dev, void *pdata,
| ^
./include/linux/pci.h:1915:2: note: previous definition is here
1915 | *pcie_ptm_create_debugfs(struct device *dev, void *pdata,
| ^
drivers/pci/pcie/ptm.c:546:6: error: redefinition of 'pcie_ptm_destroy_debugfs'
546 | void pcie_ptm_destroy_debugfs(struct pci_ptm_debugfs *ptm_debugfs)
| ^
./include/linux/pci.h:1918:1: note: previous definition is here
1918 | pcie_ptm_destroy_debugfs(struct pci_ptm_debugfs *ptm_debugfs) { }
|
Fixes: 132833405e61 ("PCI: Add debugfs support for exposing PTM context")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Closes: https://lore.kernel.org/linux-pci/20250607025506.GA16607@sol
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250608033305.15214-1-manivannan.sadhasivam@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 7 are cc:stable and the remainder address post-6.15
issues or aren't considered necessary for -stable kernels. Only 4 are
for MM.
- The series `Revert "bcache: update min_heap_callbacks to use
default builtin swap"' from Kuan-Wei Chiu backs out the author's
recent min_heap changes due to a performance regression.
A fix for this regression has been developed but we felt it best to
go back to the known-good version to give the new code more bake
time.
- A lot of MAINTAINERS maintenance.
I like to get these changes upstreamed promptly because they can't
break things and more accurate/complete MAINTAINERS info hopefully
improves the speed and accuracy of our responses to submitters and
reporters"
* tag 'mm-hotfixes-stable-2025-06-22-18-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add additional mmap-related files to mmap section
MAINTAINERS: add memfd, shmem quota files to shmem section
MAINTAINERS: add stray rmap file to mm rmap section
MAINTAINERS: add hugetlb_cgroup.c to hugetlb section
MAINTAINERS: add further init files to mm init block
MAINTAINERS: update maintainers for HugeTLB
maple_tree: fix MA_STATE_PREALLOC flag in mas_preallocate()
MAINTAINERS: add missing test files to mm gup section
MAINTAINERS: add missing mm/workingset.c file to mm reclaim section
selftests/mm: skip uprobe vma merge test if uprobes are not enabled
bcache: remove unnecessary select MIN_HEAP
Revert "bcache: remove heap-related macros and switch to generic min_heap"
Revert "bcache: update min_heap_callbacks to use default builtin swap"
selftests/mm: add configs to fix testcase failure
kho: initialize tail pages for higher order folios properly
MAINTAINERS: add linux-mm@ list to Kexec Handover
mm: userfaultfd: fix race of userfaultfd_move and swap cache
mm/gup: revert "mm: gup: fix infinite loop within __get_longterm_locked"
selftests/mm: increase timeout from 180 to 900 seconds
mm/shmem, swap: fix softlockup with mTHP swapin
|
|
ASUS UM5606* models use the quirk to set up the bass speakers, but it
missed the mic-mute LED configuration. Other similar models have the
AMD ACP dmic, and the mic-mute is set up for that, but those models
don't have AMD ACP but rather built-in mics of Realtek codec, hence
the Realtek driver should set it up, instead.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220125
Link: https://patch.msgid.link/20250623151841.28810-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In snd_usb_get_audioformat_uac3(), the length value returned from
snd_usb_ctl_msg() is used directly for memory allocation without
validation. This length is controlled by the USB device.
The allocated buffer is cast to a uac3_cluster_header_descriptor
and its fields are accessed without verifying that the buffer
is large enough. If the device returns a smaller than expected
length, this leads to an out-of-bounds read.
Add a length check to ensure the buffer is large enough for
uac3_cluster_header_descriptor.
Signed-off-by: Youngjun Lee <yjjuny.lee@samsung.com>
Fixes: 9a2fe9b801f5 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Link: https://patch.msgid.link/20250623-uac3-oob-fix-v1-1-527303eaf40a@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HP EliteBook 6 G1a laptops use ALC236 codec and need the fixup
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF to make the mic/micmute LEDs
work.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Link: https://patch.msgid.link/20250623063023.374920-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
syzbot reported use-after-free in vhci_flush() without repro. [0]
From the splat, a thread close()d a vhci file descriptor while
its device was being used by iotcl() on another thread.
Once the last fd refcnt is released, vhci_release() calls
hci_unregister_dev(), hci_free_dev(), and kfree() for struct
vhci_data, which is set to hci_dev->dev->driver_data.
The problem is that there is no synchronisation after unlinking
hdev from hci_dev_list in hci_unregister_dev(). There might be
another thread still accessing the hdev which was fetched before
the unlink operation.
We can use SRCU for such synchronisation.
Let's run hci_dev_reset() under SRCU and wait for its completion
in hci_unregister_dev().
Another option would be to restore hci_dev->destruct(), which was
removed in commit 587ae086f6e4 ("Bluetooth: Remove unused
hci-destruct cb"). However, this would not be a good solution, as
we should not run hci_unregister_dev() while there are in-flight
ioctl() requests, which could lead to another data-race KCSAN splat.
Note that other drivers seem to have the same problem, for exmaple,
virtbt_remove().
[0]:
BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718
CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
skb_queue_purge include/linux/skbuff.h:3368 [inline]
vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69
hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline]
hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592
sock_do_ioctl+0xd9/0x300 net/socket.c:1190
sock_ioctl+0x576/0x790 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcf5b98e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929
RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009
RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528
</TASK>
Allocated by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635
misc_open+0x2bc/0x330 drivers/char/misc.c:161
chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414
do_dentry_open+0xdf0/0x1970 fs/open.c:964
vfs_open+0x3b/0x340 fs/open.c:1094
do_open fs/namei.c:3887 [inline]
path_openat+0x2ee5/0x3830 fs/namei.c:4046
do_filp_open+0x1fa/0x410 fs/namei.c:4073
do_sys_openat2+0x121/0x1c0 fs/open.c:1437
do_sys_open fs/open.c:1452 [inline]
__do_sys_openat fs/open.c:1468 [inline]
__se_sys_openat fs/open.c:1463 [inline]
__x64_sys_openat+0x138/0x170 fs/open.c:1463
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4643 [inline]
kfree+0x18e/0x440 mm/slub.c:4842
vhci_release+0xbc/0xd0 drivers/bluetooth/hci_vhci.c:671
__fput+0x44c/0xa70 fs/file_table.c:465
task_work_run+0x1d1/0x260 kernel/task_work.c:227
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x6ad/0x22e0 kernel/exit.c:955
do_group_exit+0x21c/0x2d0 kernel/exit.c:1104
__do_sys_exit_group kernel/exit.c:1115 [inline]
__se_sys_exit_group kernel/exit.c:1113 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1113
x64_sys_call+0x21ba/0x21c0 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff88807cb8d800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 88 bytes inside of
freed 1024-byte region [ffff88807cb8d800, ffff88807cb8dc00)
Fixes: bf18c7118cf8 ("Bluetooth: vhci: Free driver_data on file release")
Reported-by: syzbot+2faa4825e556199361f9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f62d64848fc4c7c30cd6
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Like ftruncate and write, fallocate operations on the same file cannot
be executed in parallel, so it is better to make fallocate be hashed
work.
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Link: https://lore.kernel.org/r/20250623110218.61490-1-changfengnan@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace "rdev" with correct loop variable name "r".
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 63c32ed4afc2 ("dm raid: add raid4/5/6 journaling support")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Some users and customers reported that their backup/copy tools started
to fail when the directory being copied contained symlink targets that
the client couldn't parse - even when those symlinks weren't followed.
Fix this by allowing lstat(2) and readlink(2) to succeed even when the
client can't resolve the symlink target, restoring old behavior.
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Reported-by: Remy Monsen <monsen@monsen.cc>
Closes: https://lore.kernel.org/r/CAN+tdP7y=jqw3pBndZAGjQv0ObFq8Q=+PUDHgB36HdEz9QA6FQ@mail.gmail.com
Reported-by: Pierguido Lambri <plambri@redhat.com>
Fixes: 12b466eb52d9 ("cifs: Fix creating and resolving absolute NT-style symlinks")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
clang gets a bit confused by the code in the qed_mfw_process_tlv_req and
ends up spilling registers to the stack hundreds of times. When sanitizers
are enabled, this can end up blowing the stack warning limit:
drivers/net/ethernet/qlogic/qed/qed_mng_tlv.c:1244:5: error: stack frame size (1824) exceeds limit (1280) in 'qed_mfw_process_tlv_req' [-Werror,-Wframe-larger-than]
Apparently the problem is the complexity of qed_mfw_update_tlvs()
after inlining, and marking the four main branches of that function
as noinline_for_stack makes this problem completely go away, the stack
usage goes down to 100 bytes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During the hibernate entry sequence, ACP registers will be reset to
default values and acp ip will be completely powered off including acp
SoundWire pads. During resume sequence, if acp SoundWire pad keeper enable
register is not restored along with pad pulldown control register value,
then SoundWire manager links won't be powered on correctly results in
peripheral register access failures and completely audio function is
broken.
Add code to store the acp SoundWire pad keeper enable register and acp pad
pulldown ctrl register values before entering into suspend state and
restore the register values during resume sequence based on condition check
for acp SoundWire pad keeper enable register for ACP6.3, ACP7.0 & ACP7.1
platforms.
Fixes: 491628388005 ("ASoC: amd: ps: add callback functions for acp pci driver pm ops")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20250623084630.3100279-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
